Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Domain adaptation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Discovery and Analysis of Rare High-Impact Failure Modes using Adversarial RL-Informed Sampling

Adaptive learning agents have tremendous potential to handle critical tasks currently performed by humans. Unfortunately, due to their complexity, it can be difficult to verify that these learning agents do not have critical failure modes. Standard verification and validation methods often do not apply directly to learning agents and Monte Carlo methods have difficulty covering even a small fraction of the state space, especially in multiagent systems or over long time horizons. To overcome this difficulty, we demonstrate an adaptive stress-testing method based on reinforcement learning of correlations that raise the probability of failure. This approach has three key properties: (1) it is able to find rare failure modes with far greater sample efficiency than Monte Carlo methods, (2) it can estimate the true probability of a failure mode despite the inherent bias in the learning method, and (3) it is capable of learning and resampling compact representations of multimodal failure spaces. These properties are important in practice as we need to find disparate failure modes while accounting for their actual relevance. This is a significant advantage over traditional adaptive stress testing methods that give abstract likelihoods of particular failure instances, but cannot estimate the probability of a broader failure mode. We test our algorithm on a simple problem from the aviation domain where an autonomous aircraft lands in gusty wind conditions. The results suggest that we can find failure modes with far fewer samples than the Monte Carlo approach and simultaneously estimate the probability of failure.

Validation↗

Discovery and Analysis of Rare High-Impact Failure Modes using Adversarial RL-Informed Sampling

Adaptive learning agents have tremendous potential to handle critical tasks currently performed by humans. Unfortunately, due to their complexity, it can be difficult to verify that these learning agents do not have critical failure modes. Standard verification and validation methods often do not apply directly to learning agents and Monte Carlo methods have difficulty covering even a small fraction of the state space, especially in multiagent systems or over long time horizons. To overcome this difficulty, we demonstrate an adaptive stress-testing method based on reinforcement learning of correlations that raise the probability of failure. This approach has three key properties: (1) it is able to find rare failure modes with far greater sample efficiency than Monte Carlo methods, (2) it can estimate the true probability of a failure mode despite the inherent bias in the learning method, and (3) it is capable of learning and resampling compact representations of multimodal failure spaces. These properties are important in practice as we need to find disparate failure modes while accounting for their actual relevance. This is a significant advantage over traditional adaptive stress testing methods that give abstract likelihoods of particular failure instances, but cannot estimate the probability of a broader failure mode. We test our algorithm on a simple problem from the aviation domain where an autonomous aircraft lands in gusty wind conditions. The results suggest that we can find failure modes with far fewer samples than the Monte Carlo approach and simultaneously estimate the probability of failure.

Validation↗

A multigrid method for steady Euler equations on unstructured adaptive grids

A flux-difference splitting type algorithm is formulated for the steady Euler equations on unstructured grids. The polynomial flux-difference splitting technique is used. A vertex-centered finite volume method is employed on a triangular mesh. The multigrid method is in defect-correction form. A relaxation procedure with a first order accurate inner iteration and a second-order correction performed only on the finest grid, is used. A multi-stage Jacobi relaxation method is employed as a smoother. Since the grid is unstructured a Jacobi type is chosen. The multi-staging is necessary to provide sufficient smoothing properties. The domain is discretized using a Delaunay triangular mesh generator. Three grids with more or less uniform distribution of nodes but with different resolution are generated by successive refinement of the coarsest grid. Nodes of coarser grids appear in the finer grids. The multigrid method is started on these grids. As soon as the residual drops below a threshold value, an adaptive refinement is started. The solution on the adaptively refined grid is accelerated by a multigrid procedure. The coarser multigrid grids are generated by successive coarsening through point removement. The adaption cycle is repeated a few times. Results are given for the transonic flow over a NACA-0012 airfoil.

Riemslagh, Kris↗

A spectral multi-domain technique for viscous compressible reacting flows

The first application of a spectral multidomain method for viscous compressible flow is presented. The method imposes a global flux balance condition at the interface so that high-order continuity of the solution is preserved. The solution scheme can be adapted to the particular requirement in each subdomain. To illustrate these advantages, a Mach 11 shock calculation is presented to study the chemical kinetics initiated as air passes through a fully resolved shock wave.

Macaraeg, M. G.↗

Nonconforming mortar element methods: Application to spectral discretizations

Spectral element methods are p-type weighted residual techniques for partial differential equations that combine the generality of finite element methods with the accuracy of spectral methods. Presented here is a new nonconforming discretization which greatly improves the flexibility of the spectral element approach as regards automatic mesh generation and non-propagating local mesh refinement. The method is based on the introduction of an auxiliary mortar trace space, and constitutes a new approach to discretization-driven domain decomposition characterized by a clean decoupling of the local, structure-preserving residual evaluations and the transmission of boundary and continuity conditions. The flexibility of the mortar method is illustrated by several nonconforming adaptive Navier-Stokes calculations in complex geometry.

Maday, Yvon↗

Fluid-structural interactions using Navier-Stokes flow equations coupled with shell finite element structures

A computational procedure is presented to study fluid-structural interaction problems for three-dimensional aerospace structures. The flow is modeled using the three-dimensional unsteady Euler/Navier-Stokes equations and solved using the finite-difference approach. The three dimensional structure is modeled using shell/plate finite-element formulation. The two disciplines are coupled using a domain decomposition approach. Accurate procedures both in time and space are developed to combine the solutions from the flow equations with those of the structural equations. Time accuracy is maintained using aeroelastic configuration-adaptive moving grids that are computed every time step. The work done by aerodynamic forces due to structural deformations is preserved using consistent loads. The present procedure is validated by computing the aeroelastic response of a wing and comparing with experiment. Results are illustrated for a typical wing-body configuration.

Guruswamy, Guru P.↗

Algorithms for high aspect ratio oriented triangulations

Grid generation plays an integral part in the solution of computational fluid dynamics problems for aerodynamics applications. A major difficulty with standard structured grid generation, which produces quadrilateral (or hexahedral) elements with implicit connectivity, has been the requirement for a great deal of human intervention in developing grids around complex configurations. This has led to investigations into unstructured grids with explicit connectivities, which are primarily composed of triangular (or tetrahedral) elements, although other subdivisions of convex cells may be used. The existence of large gradients in the solution of aerodynamic problems may be exploited to reduce the computational effort by using high aspect ratio elements in high gradient regions. However, the heuristic approaches currently in use do not adequately address this need for high aspect ratio unstructured grids. High aspect ratio triangulations very often produce the large angles that are to be avoided. Point generation techniques based on contour or front generation are judged to be the most promising in terms of being able to handle complicated multiple body objects, with this technique lending itself well to adaptivity. The eventual goal encompasses several phases: first, a partitioning phase, in which the Voronoi diagram of a set of points and line segments (the input set) will be generated to partition the input domain; second, a contour generation phase in which body-conforming contours are used to subdivide the partition further as well as introduce the foundation for aspect ratio control, and; third, a Steiner triangulation phase in which points are added to the partition to enable triangulation while controlling angle bounds and aspect ratio. This provides a combination of the advancing front/contour techniques and refinement. By using a front, aspect ratio can be better controlled. By using refinement, bounds on angles can be maintained, while attempting to minimize the number of Steiner points.

Posenau, Mary-Anne K.↗

Aerodynamic parameter estimation via Fourier modulating function techniques

Parameter estimation algorithms are developed in the frequency domain for systems modeled by input/output ordinary differential equations. The approach is based on Shinbrot's method of moment functionals utilizing Fourier based modulating functions. Assuming white measurement noises for linear multivariable system models, an adaptive weighted least squares algorithm is developed which approximates a maximum likelihood estimate and cannot be biased by unknown initial or boundary conditions in the data owing to a special property attending Shinbrot-type modulating functions. Application is made to perturbation equation modeling of the longitudinal and lateral dynamics of a high performance aircraft using flight-test data. Comparative studies are included which demonstrate potential advantages of the algorithm relative to some well established techniques for parameter identification. Deterministic least squares extensions of the approach are made to the frequency transfer function identification problem for linear systems and to the parameter identification problem for a class of nonlinear-time-varying differential system models.

Pearson, A. E.↗

Massively Parallel Algorithms for Real-Time Wavefront Control of a Dense Adaptive Optics System

In this paper massively parallel algorithms and architectures for real-time wavefront control of a dense adaptive optic system (SELENE) are presented. We have already shown that the computation of a near optimal control algorithm for SELENE can be reduced to the solution of a discrete Poisson equation on a regular domain. Although this represents an optimal computation, due the large size of the system and the high sampling rate requirement, the implementation of this control algorithm poses a computationally challenging problem since it demands a sustained computational throughput of the order of 10 GFlops. We develop a novel algorithm, designated as Fast Invariant Imbedding algorithm, which offers a massive degree of parallelism with simple communication and synchronization requirements. Due to these features, our algorithm is significantly more efficient than other Fast Poisson Solvers for implementation on massively parallel architectures.

massively↗

Intelligent Control for the BEES Flyer

This paper describes the effort to provide a preliminary capability analysis and a neural network based adaptive flight control system for the JPL-led BEES aircraft project. The BEES flyer was envisioned to be a small, autonomous platform with sensing and control systems mimicking those of biological systems for the purpose of scientific exploration on the surface of Mars. The platform is physically tightly constrained by the necessity of efficient packing within rockets for the trip to Mars. Given the physical constraints, the system is not an ideal configuration for aerodynamics or stability and control. The objectives of this effort are to evaluate the aerodynamics characteristics of the existing design, to make recommendaaons as to potential improvements and to provide a control system that stabilizes the existing aircraft for nominal flight and damaged conditions. Towards this several questions are raised and analyses are presented to arrive at answers to some of the questions raised. CART3D, a high-fidelity inviscid analysis package for conceptual and preliminary aerodynamic design, was used to compute a parametric set of solutions over the expected flight domain. Stability and control derivatives were extracted from the database and integrated with the neural flight control system. The Integrated Vehicle Modeling Environment (IVME) was also used for estimating aircraft geometric, inertial, and aerodynamic characteristics. A generic neural flight control system is used to provide adaptive control without the requirement for extensive gain scheduling or explicit system identification. The neural flight control system uses reference models to specify desired handling qualities in the roll, pitch, and yaw axes, and incorporates both pre-trained and on-line learning neural networks in the inverse model portion of the controller. Results are presented for the BEES aircraft in the subsonic regime for terrestrial and Martian environments.

Krishnakumar, K.↗

An inverse dynamic method yielding flexible manipulator state trajectories

An inverse dynamic equation for a flexible manipulator is derived in a state form. By dividing the inverse system into the causal part and the anticausal part, torque is calculated in the time domain for a certain end point trajectory, as well as trajectories of all state variables. The open loop control of the inverse dynamic method shows an excellent result in simulation. For practical applications, a control strategy adapting feedback tracking control to the inverse dynamic feedforward control is illustrated, and its good experimental result is presented.

Kwon, Dong-Soo↗

Adaptations of human skeletal muscle fibers to spaceflight

Human skeletal muscle fibers seem to share most of the same interrelationships among myosin ATPase activity, myosin heavy chain (MHC) phenotype, mitochondrial enzyme activities, glycolytic enzyme activities, and cross-sectional area (CSA) as found in rat, cat, and other species. One difference seems to be that fast fibers with high mitochrondrial content occur less frequently in humans than in the rat or cat. Recently, we have reported that the type of MHC expressed and the size of the muscle fibers in humans that have spent 11 days in space change significantly. Specifically, about 8% more fibers express fast MHCs and all phenotypes atrophy in the vastus lateralis (VL) post compared to preflight. In the present paper we examine the relationships among the population of myonuclei, MHC type, and CSA of single human muscle fibers before and after spaceflight. These are the first data that define the relationship among the types of MHC expressed, myonuclei number, and myonuclei domain of single fibers in human muscle. We then compare these data to similar measures in the cat. In addition, the maximal torque that can be generated by the knee extensors and their fatigability before and after spaceflight are examined. These data provide some indication of the potential physiologica consequences of the muscle adaptations that occur in humans in response to spaceflight.

M. Kathleen Day↗

A Multi-Level Parallelization Concept for High-Fidelity Multi-Block Solvers

The integration of high-fidelity Computational Fluid Dynamics (CFD) analysis tools with the industrial design process benefits greatly from the robust implementations that are transportable across a wide range of computer architectures. In the present work, a hybrid domain-decomposition and parallelization concept was developed and implemented into the widely-used NASA multi-block Computational Fluid Dynamics (CFD) packages implemented in ENSAERO and OVERFLOW. The new parallel solver concept, PENS (Parallel Euler Navier-Stokes Solver), employs both fine and coarse granularity in data partitioning as well as data coalescing to obtain the desired load-balance characteristics on the available computer platforms. This multi-level parallelism implementation itself introduces no changes to the numerical results, hence the original fidelity of the packages are identically preserved. The present implementation uses the Message Passing Interface (MPI) library for interprocessor message passing and memory accessing. By choosing an appropriate combination of the available partitioning and coalescing capabilities only during the execution stage, the PENS solver becomes adaptable to different computer architectures from shared-memory to distributed-memory platforms with varying degrees of parallelism. The PENS implementation on the IBM SP2 distributed memory environment at the NASA Ames Research Center obtains 85 percent scalable parallel performance using fine-grain partitioning of single-block CFD domains using up to 128 wide computational nodes. Multi-block CFD simulations of complete aircraft simulations achieve 75 percent perfect load-balanced executions using data coalescing and the two levels of parallelism. SGI PowerChallenge, SGI Origin 2000, and a cluster of workstations are the other platforms where the robustness of the implementation is tested. The performance behavior on the other computer platforms with a variety of realistic problems will be included as this on-going study progresses.

Hatay, Ferhat F.↗

A new capability for predicting helicopter rotor and propeller noise including the effect of forward motion

The governing equation and computing technique for the prediction of helicopter rotor and propeller noise are described. The method which gives both the acoustic pressure time history and spectrum of the noise includes the thickness and the loading noise. It was adapted to computers resulting in a new capability in noise prediction by removing many of the restrictions and limitations of previous theories. The capability results from the fact that the theory is developed entirely in the time domain. The formulation and the technique used are not limited to compact sources, steady level flight or to the far-field. In addition, the inputs to the computer program are normally available or are amenable to experimental measurements. This program can be used to study rotor and propeller noise with the aim of minimizing the radiated noise to reduce annoyance to the public. Several examples demonstrating the features and capability of the computer program are presented.

Farassat, F.↗

Finite element solution of the Euler equations in two and three dimensions

The paper presents a finite element procedure for solving the equations of compressible flow over bodies of arbitrary geometry. The numerical solution algorithm employed is an explicit two-step version of a second order Taylor-Galerkin scheme. The discretization of the computational domain into unstructured meshes of triangles in two dimensions and tetrahedra in three dimensions is performed by an automatic mesh generator. In the approach, the mesh generator is coupled to the finite element solver to produce an adaptive remeshing procedure.

Peiro, J.↗

Hybrid state-space self-tuning control using dual-rate sampling

This paper presents a hybrid state-space self-tuning control scheme using dual-rate sampling for suboptimal digital adaptive control of linear time-invariant continuous-time multivariable stochastic systems with unknown parameters. An equivalent fast-rate discrete-time state-space innovation model (with estimated states) of the continuous-time system is constructed by using the estimated system parameters and Kalman gain. To utilize the existing optimal regional-pole assignment method developed in the continuous-time domain, the constructed fast-rate discrete-time model is converted into an equivalent continuous-time model for the development of a state-feedback optimal control law with pole placement in a specific region. The developed analog optimal control law is then converted into an equivalent pseudo-slow-rate digital control law via the proposed digital redesign technique, which can be realized via slow-rate digital electronics. The proposed method enables the development of a digitally implementable advanced control algorithm for digital adaptive control of continuous-time multivariable stochastic systems which may be unstable and/or have nonminimum phase.

Shieh, Leang S.↗

An inverse dynamic method yielding flexible manipulator state trajectories

An inverse dynamic equation for a flexible manipulator is derived in a state form. By dividing the inverse system into the causal part and the anticausal part, one can calculate torque in the time domain for a certain end-point trajectory, as well as trajectories of all state variables. The open-loop control of the inverse dynamic method shows an excellent result in simulation. For practical applications, a control strategy adapting feedback tracking control to the inverse dynamic feedforward control is illustrated, and experimental results are presented.

Kwon, Dong-Soo↗

Use of Polarimetric Radar Measurements to Constrain Simulated Convective Cell Evolution: A Pilot Study with Lagrangian Tracking

To probe the potential value of a radar-driven field campaign to constrain simulation of isolated convection subject to a strong aerosol perturbation, convective cells observed by the operational KHGX weather radar in the vicinity of Houston, Texas, are examined individually and statistically. Cells observed in a single case study of onshore flow conditions during July 2013 are first examined and compared with cells in a regional model simulation. Observed and simulated cells are objectively identified and tracked from observed or calculated positive specific differential phase (K(sub DP)) above the melting level, which is related to the presence of supercooled liquid water. Several observed and simulated cells are subjectively selected for further examination. Below the melting level, we compare sequential cross sections of retrieved and simulated raindrop size distribution parameters. Above the melting level, we examine time series of KDP and radar differential reflectivity (Z(sub DR)) statistics from observations and calculated from simulated supercooled rain properties, alongside simulated vertical wind and supercooled rain mixing ratio statistics. Results indicate that the operational weather radar measurements offer multiple constraints on the properties of simulated convective cells, with substantial value added from derived K(sub DP) and retrieved rain properties. The value of collocated three-dimensional lightning mapping array measurements, which are relatively rare in the continental US, supports the choice of Houston as a suitable location for future field studies to improve the simulation and understanding of convective updraft physics. However, rapid evolution of cells between routine volume scans motivates consideration of adaptive scan strategies or radar imaging technologies to amend operational weather radar capabilities. A 3-year climatology of isolated cell tracks, prepared using a more efficient algorithm, yields additional relevant information. Isolated cells are found within the KHGX domain on roughly 40 % of days year-round, with greatest concentration in the northwest quadrant, but roughly 5-fold more cells occur during June through September. During this enhanced occurrence period, the cells initiate following a strong diurnal cycle that peaks in the early afternoon, typically follow a south-to-north flow, and dissipate within 1 h, consistent with the case study examples. Statistics indicate that ∼ 150 isolated cells initiate and dissipate within 70 km of the KHGX radar during the enhanced occurrence period annually, and roughly 10 times as many within 200 km, suitable for multi-instrument Lagrangian observation strategies. In addition to ancillary meteorological and aerosol measurements, robust vertical wind speed retrievals would add substantial value to a radar-driven field campaign.

Fridlind, Ann M.↗