SEARCH · Engineering Papers
Results for “Deposit”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thickness-Dependent Defect Structure of Epitaxial Silicon Thin Films Deposited by Hot-Wire Chemical Vapor Deposition
In this work, we study the defect structure of epitaxial film silicon grown by hot-wire chemical vapor deposition (HWCVD) on Si wafers, as a function of film thickness. We used scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) to investigate the distribution, type, and composition of the defects. To investigate the crystallographic structure, we used electron backscattering diffraction (EBSD) on the surface and cross sections of the samples. We observed that, as desired, the films grew epitaxially, and that there was an increase in the density of defects as the film thickness increased. One of the most dominant types of defects grows as long columns, reaching many micrometers in diameter at the surface. EBSD showed that these defects were composed of randomly oriented polycrystalline-silicon grains. To study the electrical nature of the film and defects, we used conductive atomic force microscopy (C-AFM), which provides information on film conductivity with high-spatial resolution. C-AFM showed that the columnar defects have much lower conductivity than the surrounding Si thin film. In this work, we show how the concentration and distribution of the defects change as the film thickness increases, and investigate their electrical properties. Finally, we discuss how the defect structure might impact solar cells made with this material.
Thermodynamics and kinetic behaviors of thickness-dependent crystallization in high-k thin films deposited by atomic layer deposition
Atomic layer deposition is adopted to prepare HfO{sub 2} and Al{sub 2}O{sub 3} high-k thin films. The HfO{sub 2} thin films are amorphous at the initial growth stage, but become crystallized when the film thickness (h) exceeds a critical value (h{sub critical}{sup *}). This phase transition from amorphous to crystalline is enhanced at higher temperatures and is discussed, taking into account the effect of kinetic energy. At lower temperatures, the amorphous state can be maintained even when h>h{sub critical}{sup *} owing to the small number of activated atoms. However, the number of activated atoms increases with the temperature, allowing crystallization to occur even in films with smaller thickness. The Al{sub 2}O{sub 3} thin films, on the other hand, maintain their amorphous state independent of the film thickness and temperature owing to the limited number of activated atoms. A thermodynamic model is proposed to describe the thickness-dependent phase transition.
Thermal chemistry of copper acetamidinate atomic layer deposition precursors on silicon oxide surfaces studied by XPS
The thermal surface chemistry of copper(I)-N,N′-di-sec-butylacetamidinate, [Cu({sup s}Bu-amd)]{sub 2}, a metalorganic complex recently proposed for the chemical-based deposition of copper films, has been characterized on SiO{sub 2} films under ultrahigh vacuum conditions by x-ray photoelectron spectroscopy (XPS). Initial adsorption at cryogenic temperatures results in the oxidation of the copper centers with Cu 2p{sub 3/2} XPS binding energies close to those seen for a +2 oxidation state, an observation that the authors interpret as the result of the additional coordination of oxygen atoms from the surface to the Cu atoms of the molecular acetamidinate dimer. Either heating to 300 K or dosing the precursor directly at that temperature leads to the loss of one of its two ligands, presumably via hydrogenation/protonation with a hydrogen/proton from a silanol group, or following a similar reaction on a defect site. By approximately 500 K the Cu 2p{sub 3/2}, C 1s, and N 1s XPS data suggest that the remaining acetamidinate ligand is displaced from the copper center and bonds to the silicon oxide directly, after which temperatures above 900 K need to be reached to promote further (and only partial) decomposition of those organic moieties. It was also shown that the uptake of the Cu precursor is self-limiting at either 300 or 500 K, although the initial chemistry is somewhat different at the two temperatures, and that the nature of the substrate also defines reactivity, with the thin native silicon oxide layer always present on Si(100) surfaces being less reactive than thicker films grown by evaporation, presumably because of the lower density of surface nucleation sites.
Investigation of the Deposition and Densification Parameters on the Mechanical Properties of Pressurized Spray Deposited (PSD) 3-D Printed Ceramic Components
Oak Ridge National Laboratory (ORNL) and HotEnd Works teamed to investigate the use of pressurized spray deposition (PSD) technology for the production of ceramic parts via additive manufacturing. Scanning electron microscopy of sintered parts provided by HotEnd Works revealed voids large enough to compromise the mechanical properties of PSD manufactured parts. Scanning electron microscopy and particle size analysis of the alumina oxide powder feedstocks indicated that the powders contained some large particles and some agglomerations in the powder. Further classification of the powder feedstocks and removal of the agglomerates by sonication in the liquid used for the PSD process are recommended. Analysis of sintered parts indicated that the sonic modulus for the alumina part is consistent with other known values for alumina. The density for this part was determined by standard Archimedes immersion density methods and was found to be > 99.7 % of the theoretical density for pure alumina.
Control of Thickness and Chemical Properties of Atomic Layer Deposition Overcoats for Stabilizing Cu/γ-Al 2 O 3 Catalysts
Whereas sintering and leaching of copper nanoparticles during liquid-phase catalytic processing can be prevented by using atomic layer deposition (ALD) to overcoat the nanoparticles with AlOx, this acidic overcoat leads to reversible deactivation of the catalyst by resinification and blocking of the pores within the overcoat during hydrogenation of furfural. We demonstrate that decreasing the overcoat thickness from 45 to 5 ALD cycles is an effective method to increase the rate per gram of catalyst and to decrease the rate of deactivation for catalysts pretreated at 673 K, and a fully regenerable copper catalyst can be produced with only five ALD cycles of AlOx. Moreover, although an overcoat of MgOx does not lead to stabilization of copper nanoparticles against sintering and leaching during liquid-phase hydrogenation reactions, the AlOx overcoat can be chemically modified to decrease acidity and deactivation through the addition of MgOx, while maintaining stability of the copper nanoparticles.
Metalorganic Chemical Vapor Deposition Gallium Nitride with Fast Growth Rate for Vertical Power Device Applications
Not provided.
Laser-Assisted Metal–Organic Chemical Vapor Deposition of Gallium Nitride
Not provided.
Acoustic deposition with NIMS as a high-throughput enzyme activity assay
Explore the source record for details and available documents.
Superior Fischer-Tropsch Performance of Uniform Cobalt Nanoparticles Deposited into Mesoporous SiC
Electrochemically-derived well-crystalline mesoporous silicon carbide (pSiC) was used to host cobalt nanoparticles and to show superior catalytic performance during the CO hydrogenation according to Fischer-Tropsch. Colloidal metal particles (9 ± 0.4 nm) were prepared independently before depositing them into pSiC and, for comparison purposes, into commercially available silica (Davisil) and foam-like MCF-17 supports. The Co/pSiC catalyst demonstrated the highest catalytic activity of 117 ?molCO gCo-1 s-1 at 220 °C in the Fischer-Tropsch reaction, while the silica supported cobalt samples showed about one order of magnitude less activity. A significant increase in the C5+ hydrocarbons selectivity for Co/pSiC was observed. The stable performance of the catalyst is attributed to the high dispersion of the active phase and the use of silicon carbide acting as a thermally conductive and chemically inert porous support.
In-pile tensile creep of chemical vapor deposited silicon carbide at 300 C
Explore the source record for details and available documents.
Enhanced Catalyst Durability for Bio-Based Adipic Acid Production by Atomic Layer Deposition
Harsh reaction environments challenge the lifetime productivity of conventional catalysts and impede emerging biobased chemical processes. Condensed-phase processing of muconic acid, a biobased platform chemical, leads to problematic levels of catalyst leaching and fouling. Atomic layer deposition (ALD) can improve catalyst durability using protective metal oxide coatings; however, a targeted coating strategy and cost models thereof are needed for application-specific deactivation challenges that can surmount these challenges while accounting for process implications. Herein, we utilize thin (<5 wt% Al) Al2O3 ALD coatings to increase the lifetime productivity of Pd/TiO2 during muconic acid hydrogenation to adipic acid. The ALD coating decreases Pd leaching by >3x and markedly improves the thermal stability of Pd and TiO2. Economic analysis for an adipic acid biorefinery supports that increased material costs and reduced catalyst productivity can be justified through lifetime extension. Broadly, this work lays the foundation for reducing the cost of biobased chemical processes through catalyst stability.
A comparative ToF-SIMS and GC–MS analysis of phototrophic communities collected from an alkaline silica-depositing hot spring
Not Available
Epitaxial Atomic Layer Deposition of Sn-Doped Indium Oxide
Coherently strained, epitaxial Sn-doped In2O3 (ITO) thin films were fabricated at temperatures as low as 250 degrees C using atomic layer deposition (ALD) on (001)-, (011)-, and (111)-oriented single-crystal Y-stabilized ZrO2 (YSZ) substrates. Resultant films possess cube-on-cube epitaxial relationships with the underlying YSZ substrates and are smooth, highly conductive, and optically transparent. This epitaxial ALD approach is favorable compared to many conventional growth techniques as it is a large-scale synthesis method that does not necessitate the use of high temperatures or ultrahigh vacuum. These films may prove valuable as a conductive growth template in areas where high-quality crystalline thin film substrates are important, such as solar energy materials, light-emitting diodes, or wide bandgap semiconductors. Furthermore, we discuss the applicability of this ALD system as an excellent model system for the study of ALD surface chemistry, nucleation, and film growth.
Amorphization as a Pathway to Fast Charging Kinetics in Atomic Layer Deposition-Derived Titania Films for Lithium Ion Batteries
Abstract not provided