Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dehydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Fe 3+ /Fe T ratios of amphiboles determined by high spatial resolution single-crystal synchrotron Mössbauer spectroscopy

The Fe 3+ /Fe T ratios (Fe 3+ /[Fe 2+ +Fe 3+ ]) in minerals can be used to understand their crystallization and post-crystallization conditions. However, as natural minerals are often zoned and contain inclusions, bulk techniques, e.g., wet chemistry, may not provide accurate Fe 3+ /Fe T values for a single phase of interest. We determined Fe 3+ /Fe T ratios of amphiboles in different crystallographic orientations by single-crystal synchrotron Mössbauer spectroscopy (SMS) in energy and time domain modes from four volcanic localities (Long Valley Caldera, Mount St. Helens, Lassen Volcanic Center, U.S.A., and Mt. Pinatubo, Philippines). The high spatial resolution (as low as 12 × 12 μm spot size) and standard-free nature of SMS allow the detection of intra-grain compositional heterogeneities in Fe 3+ /Fe T with relatively low uncertainties. Here, we combine SMS with major element compositions, water contents, and hydrogen isotope compositions to document the Fe 3+ /Fe T ratios as a function of mineral composition and post-crystallization dehydrogenation. Spectra were fitted with up to five distinct sites: ferrous iron on M(1), M(2), M(3), and ferric iron on M(2) and M(3), consistent with X-ray diffraction studies on single crystals of amphibole. The Fe 3+ /Fe T ratios range from 0.14 ± 0.03 (Long Valley Caldera), 0.51 to 0.63 ± 0.02 (representing intra-grain heterogeneities, Mount St. Helens) to 0.86 ± 0.03 (Lassen Volcanic Center). The latter grain experienced post-crystallization dehydrogenation, shown by its low water content (0.6 ± 0.05 wt%) and its elevated hydrogen isotope composition (δD = +25 ± 3‰ relative to SMOW). The Fe 3+ /Fe T ratios of 0.62 ± 0.01 and 0.20 ± 0.01 of two Mt. Pinatubo grains correlate with high-Al 2 O 3 cores and low-Al 2 O 3 rims and smaller phenocrysts in the sample, respectively. This study shows that SMS is capable of distinguishing two different domains with dissimilar Fe 3+ /Fe T values formed under different crystallization conditions, demonstrating that SMS in combination with major element, water, and hydrogen isotope compositions allows the interpretation of amphibole Fe 3+ /Fe T ratios in the context of crystallization and post-crystallization processes.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Direct conversion of Light Hydrocarbons to Olefins (Final report)

Reaction35 is developing a new industrial process that is substantially different from the traditional standalone dehydrogenation process practiced in industry such as Oleflex® and Catofin®. Those processes have substantial energy consumption and loss of feed constraints. The Reaction35 process is based on using molecular bromine to activate the alkane (e.g., nbutane) by forming highly reactive butyl bromides. The butyl bromides are easily converted to nbutylenes (final product) and hydrogen bromide. The hydrogen bromide generated in bromination and dehydrobromination is oxidized with air, recovering the molecular bromine which is reused. The overall result is a process with a favorably low energy consumption and less than 1 % overall loss of feed compared to more than 5 % for the direct dehydrogenation processes. During the grant period, several important aspects of the technology have been developed further. The major effort was the hydrogenation catalyst step development. The hydrogenation catalyst is used for recovery of the polybromobutanes to the bromobutanes intermediates. The scientific field regarding dibromo- and polybromoalkanes has not been extensively studied, which necessitated that Reaction35 performs a full study of a number of catalysts and the various experimental conditions that influence the hydrogenation reaction. Currently, Reaction35 has completed its catalyst selection and preliminary experimental parameters optimization. This will allow for the construction of an engineering model for a pilot unit testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Kinetic and Mechanistic Understanding of Boron-Containing Catalysts for the Production of Light Olefins through Selective Oxidation

In recent years, an abundance of natural gas obtained from shale deposits has created opportunities for the US chemical industry to establish new and more efficient processes for the production of chemical intermediates and polymers. For example, the replacement of petroleum-derived naphtha as a to shale-derived ethane as feedstocks has made the production of ethylene/polyethylene less costly. However, this shift in feedstock has led to lower production of propylene from steam crackers, and new “on-purpose” light olefin production technologies have been implemented to bridge the gap between propylene supply and demand. The most important of these processes is direct propane dehydrogenation (PDH), but catalyst deactivation and high temperatures lead to high capital and operating costs. Oxidative dehydrogenation of propane (ODHP) is an efficient alternative to PDH, but high selectivity to CO2 from previous metal oxide catalyst prevents implementation. Hexagonal boron nitride (hBN) and other boron-containing materials have been recently developed as highly selective catalysts for both ODHP and oxidative cracking, surpassing previous systems. Much is still unknown in regard to the mechanism and the dynamic surface changes that occur under reaction conditions. This research project aims to combine in situ/operando spectroscopic investigation and kinetic studies to elucidate the interplay between the proposed gas-phase mechanism and the surface structures on the working catalyst. These insights will be leveraged to create a framework for optimizing reaction conditions and material synthesis for the next generation of boron-containing selective oxidation catalysts.

02 PETROLEUM↗
DOE OSTI2025

Photo-Induced Hydrogen Production from Formic Acid Using a Palladium Catalyst

Liquid organic hydrogen carriers (LOHCs) are recognized as promising sustainable hydrogen (H 2 ) carriers due to their high volumetric capacity and ability to store H 2 at ambient conditions, eliminating the need for energy-intensive liquefaction or compression processes associated with H 2 or ammonia gas. One of the main current drawbacks, however, is LOHCs’ high energy demand for H 2 release. This work presents the photo-induced liberation of H 2 from formic acid (FA) as a liquid H 2 carrier, using visible light and well-established 5 wt% palladium nanoparticles supported over carbon (Pd/C). We show that low-power light-emitting diodes (LEDs) produced higher gas flow than their thermal baseline (35 °C), with 27.2 mL/min and 7.72 mL/min, respectively. Further, the rate of gas evolved with light intensity, catalyst loading, and the concentration of FA. Light-induced dehydrogenation shows similar deactivation as the known thermal mechanisms, such as the decreased Pd 2+ /Pd 0 ratio and Pd nanoparticle agglomeration. Hence, these observations suggest a photothermal mechanism, whereby the LED provides heat efficiently absorbed by the Pd/C catalyst and enhanced by Pd’s ability to absorb light, thereby driving the FA dehydrogenation reaction at ambient conditions.

08 HYDROGEN↗
DOE OSTI2020

Polydentate ligands and their complexes for molecular catalysis

Embodiments of the present disclosure relate generally to novel achiral and chiral sulfur-, nitrogen- and phosphorus-containing ligands, designated as NNS-type, P(O)NS-type, PNS-type, SNNS-type, SNNP(O)-type, or SNNP-type polydentate ligands and transition metal complexes of these ligands, including iridium complexes having PNS-type and NNS-type ligands. The catalysts derived from these ligands and transition metal complexes may be used in a wide range of catalytic reactions, including hydrogenation and transfer hydrogenation of unsaturated organic compounds, dehydrogenation of alcohols and boranes, various dehydrogenative couplings, chemoselective hydrogenation of α,β-unsaturated alcohols, and other catalytic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Solution combustion synthesis of iron-based alumina nanocomposites for clean production of hydrogen from fossil fuels

Iron-based alumina nanocomposites are promising materials for microwave-assisted thermocatalytic dehydrogenation of fossil fuels, which has been proposed for the production of hydrogen with no CO2 emissions. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of these materials because it has been used for synthesis of many nanoscale oxides. However, SCS can be carried out using different organic fuels and different heating equipment, and it is important to determine which fuel and heating mode generate materials with the best properties for dehydrogenation, such as maximized specific surface area. In the present work, the iron-based alumina nanocomposites were obtained by SCS using two different fuels (citric acid and glycine) and two different heating modes (a hotplate and a muffle furnace). The precursors/oxidizers were iron nitrate and aluminum nitrate. They were mixed with the fuel according to stoichiometry and dissolved in water. Heating the solution resulted in combustion synthesis. The products were characterized by X-ray diffraction analysis, Brunauer-Emmett-Teller surface area analysis, laser diffraction particle size analysis, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The experiments have shown that the specific surface area of the iron-based alumina nanocomposites obtained by SCS can be dramatically increased by using citric acid instead of glycine, and additionally by using a muffle furnace instead of a hotplate.

Solution combustion synthesis, Nanoscale metal oxi↗
DOE OSTI2022

Atomically Precise Single Metal Oxide Cluster Catalyst with Oxygen–Controlled Activity

Single cluster catalysts (SCCs) consisting of atomically precise metal nanoclusters dispersed on supports represent a new frontier of heterogeneous catalysis. However, the ability to synthesize SCCs with high loading and to precisely introduce non-metal atoms to further tune their catalytic activity and reaction scope of SCCs have been longstanding challenges. In this work, a new interface confinement strategy is developed for the synthesis of a high density of atomically precise Ru oxide nanoclusters (Ru 3 O 2 ) on reduced graphene oxide (rGO), attributed to the suppression of diffusion-induced metal cluster aggregation. Ru 3 O 2 /rGO exhibits a significantly enhanced activity for oxidative dehydrogenation of 1,2,3,4-tetrahydroquinoline (THQ) to quinoline with a high yield (≈86%) and selectivity (≈99%), superior to Ru and RuO 2 nanoparticles, and homogeneous single/multiple-site Ru catalysts. In addition, Ru 3 O 2 /rGO is also capable of efficiently catalyzing more complex oxidative reactions involving three reactants. The theoretical calculations reveal that the presence of two oxygen atoms in the Ru 3 O 2 motif not only leads to a weak hydrogen bonding interaction between the THQ reactant and the active site, but also dramatically depletes the density of states near the Fermi level, which is attributed to the increased positive valence state of Ru and the enhanced oxidative activity of the Ru 3 O 2 cluster for hydrogen abstraction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

B–MWW Zeolite: The Case Against Single–Site Catalysis

Boron-containing materials have recently been identified as highly selective catalysts for the oxidative dehydrogenation (ODH) of alkanes to olefins. It has previously been demonstrated by several spectroscopic characterization techniques that the surface of these boron-containing ODH catalysts oxidize and hydrolyze under reaction conditions, forming an amorphous B 2 (OH) x O (3–x/2) (x=0–6) layer. Yet, the precise nature of the active site(s) remains elusive. In this Communication, we provide a detailed characterization of zeolite MCM-22 isomorphously substituted with boron (B-MWW). Using 11 B solid-state NMR spectroscopy, we show that the majority of boron species in B-MWW exist as isolated BO 3 units, fully incorporated into the zeolite framework. However, this material shows no catalytic activity for ODH of propane to propene. The catalytic inactivity of B-MWW for ODH of propane falsifies the hypothesis that site-isolated BO 3 units are the active site in boron-based catalysts. Furthermore, this observation is at odds with other traditionally studied catalysts like vanadium-based catalysts and provides an important piece of the mechanistic puzzle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cu Evolution over Bimetallic Cu‐Y/Beta Zeolite Under H 2 and Ethanol Atmospheres: Unveiling the Role of Diatomic Metal–Metal Interactions

Understanding the dynamic evolution of Cu species under varying environmental conditions is critical for addressing challenges related to the activity and the stability of copper‐based catalysts in thermo‐, photo‐, and electrocatalysis. However, metal–metal interactions between dual single atoms and their effects on Cu evolution after exposure to different environmental molecules remain underexplored. Herein, we synthesized bimetallic Cu‐Y/Beta catalysts with dual single‐atom Cu and Y sites and monometallic Cu‐Beta catalysts with isolated Cu sites in dealuminated Beta zeolites. By varying Cu and Y compositions, diatomic interactions were studied under H 2 and ethanol atmospheres. With 6 wt% Y loading, approximately 0.4 wt% of Cu species in Cu‐Y/Beta remained partially oxidized as Cu(I) after reduction in pure H 2 at 350 °C, in contrast to the full transition to metallic Cu observed in Cu‐Beta. Combining X‐ray absorption spectroscopy with kinetic studies revealed that metallic Cu became the predominant species after reduction with H 2 as Cu loading increased from 0.4 to 1.7 wt%, quadrupling the initial ethanol dehydrogenation rate and demonstrating the dominant role of Cu(0) sites. In conclusion, scanning transmission electron microscopy and density functional theory simulations indicated spatial proximity between dual single‐atom Cu and Y sites and elucidated Cu speciation controlled by diatomic interactions.

Copper↗
DOE OSTI2020

Recent Advances in the Understanding of Boron-Containing Catalysts for the Selective Oxidation of Alkanes to Olefins

The production of ethylene and propylene through aerobic alkane oxidation without significant coproduction of CO and CO 2 (CO x ) presents a challenge to academic and industrial researchers alike. Recently, boron-containing materials such as hexagonal boron nitride (hBN) have been identified as active and selective catalysts for the oxidative dehydrogenation (ODH) of propane to propylene with minimal CO x selectivity. Additionally, high olefin selectivity is also obtained in the oxidation of other alkanes and other materials such as metal borides and supported B/SiO 2 have been successfully applied to this transformation. Here, recent advances in the understanding of these catalysts in the oxidation of light alkanes are presented here providing a framework for further study of this exciting field.

03 NATURAL GAS↗
DOE OSTI2023

Boosting the performances of protonic solid oxide fuel cells for co-production of propylene and electricity from propane by integrating thermo- and electro- catalysis

Protonic solid oxide fuel cells (p-SOFC) integrated with clean thermal energy sources are promising platforms for decarbonized chemical production in addition to power generation, such as on-purpose propylene production from propane dehydrogenation (PDH). The catalytic performance of the conventional nickel-cermet-based anode materials in p-SOFC for propane conversion is restrained by their low active surface area and proneness to coking. In this work, by integration of a highly efficient industry-relevant thermal catalyst PtGa/ZSM-5 for PDH reaction, we demonstrate that both the electrochemical and catalytic performance of the propane-fueled p-SOFC can be effectively enhanced. The PtGa catalyst integrated p-SOFC exhibits a peak power density of 93 mW cm -2 at 600°C, which is greater by about 100% and 50% than that without catalyst or with a perovskite-based (Pr 0.3 Sr 0.7 ) 0.9 Ni 0.1 Ti 0.9 O 3 (PSNT) catalyst layer, respectively. The PDH activity and olefin selectivity of the PtGa catalyst is also significantly higher than that of the PSNT catalyst. In addition, much improved coke tolerance and propylene selectivity (over 90%) compared to the catalyst-free Ni-cermet anode materials were achieved by integrating the industrial catalyst layer. The propane conversion can be further improved by an applied current density, whereas the olefin selectivity is almost unaltered. The excellent performance of the PtGa catalyst integrated p-SOFC is attributed to the high surface area, intrinsically high catalytic activity, selectivity, and anti-coking properties of the catalytic layer for propane conversion. In conclusion, this work provides a general approach and a case study for boosting the performances of p-SOFCs in chemical production by integrating thermo- and electro- catalysis.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Thermochemical processes for CO 2 hydrogenation to fuels and chemicals: Challenges and opportunities

This manuscript discusses the potential use of CO 2 as a carbon and oxygen carrier to return it to the carbon life cycle in the form of fuels or chemicals via thermochemical catalytic pathways. Theoretically, CO 2 hydrogenation can form a variety of fuels and chemicals. Practically, however, the selectivity, conversion, operating range, and kinetic limitations and operational cost determine the end product. Because of their high value and versatility as a chemical or fuel, small olefins (i.e., C 2 H 4 ) and methanol are often considered as target species. Whether alcohol or olefin formation, CH 4 and CO are the nature’s primary choices of CO 2 conversion. They can be formed over a wide operating temperature, pressure, and CO 2 :H 2 ratios. They are often competitive carbon species in olefin or methanol formation steps. Although they are less valuable as end products, they can be used as intermediate species. Secondary processes of CO and CH 4 to form chemicals and fuels can increase the overall CO 2 hydrogenation yield. Independent of the choice of end product, CO 2 hydrogenation requires hydrogen. Pure hydrogen derived mostly from fossil fuels adds to the overall process cost and also increases the CO 2 emissions. Hydrogen produced from water electrolysis is a renewable green pathway but is limited by the process efficiency and cost. As an alternative to pure hydrogen, low-value, small chain paraffins are suggested as the hydrogen carriers. Carbon dioxide–assisted oxidative dehydrogenation of paraffins to olefins process is a direct pathway to olefin formation. The paper discusses these potential pathways for CO 2 utilization based on theoretical analysis and recent advances in academia and industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

N-Heterocyclic Carbene Complexes of Nickel, Palladium, and Iridium Derived from Nitron: Synthesis, Structures, and Catalytic Properties

Nitron, has been employed as a “crypto-N-heterocyclic carbene” to afford 1,2,4-triazolylidene compounds of nickel, palladium and iridium. Significantly, the ligand derived from Nitron, namely Nitron NHC , affords catalytic systems, as illustrated by the ability of the iridium compound (Nitron NHC )Ir(CO) 2 Cl to effect (i) dehydrogenation of formic acid, (ii) aldehyde hydrosilyation, (iii) dehydrocoupling of hydrosilanes and alcohols, and (iv) ketone reduction via transfer hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural Rearrangements of Subnanometer Cu Oxide Clusters Govern Catalytic Oxidation

Sub-nanometer metal oxide clusters are very important materials that are widely used, for example, in catalysis or electronic devices such as sensors. Hence, it is critical to understand the atomic structures and properties of sub-nanometer metal oxide clusters under a reactive gas environment, such as O 2 . We consider here experimentally accessible precise-size Cu clusters (Cu 4 ) supported on partially hydroxylated amorphous alumina and show that such clusters can access, in catalytic conditions at high temperature under a pressure of O 2 , a large ensemble of oxidized structures, representing a large variety of oxygen content, of geometries in link with the support, and of catalytic activities for oxidation reactions, as seen from their reducibilities. A grand canonical basin hopping method based on first-principles energy reveals an ensemble of 24 configurations for the Cu 4 O x cluster of low free energy, less than 0.8 eV above the global minimum. The low free energy ensemble consists of clusters of different stoichiometries, which are mainly Cu 4 O 3 and Cu 4 O 4 in the temperature range of 200–400 °C and under a pressure of 0.5 bar of O 2 . The presence of several competitive isomers at each composition implies that cluster fluxionality impacts the phase diagram, which should be ensemble-averaged. In terms of catalytic oxidation activity, Cu 4 O 3 isomers present highly variable O abstraction energy: the most stable isomers are inactive for alkane oxidative dehydrogenation, but isomerization to metastable isomers, that proceed with low barrier, enable to create active configurations with low O abstraction energy. O atoms with the lowest anionic character, and thus of more electrophilic nature, present the best oxidation capability. In contrast, all Cu 4 O 4 isomers show a low O abstraction energy and a high potential catalytic activity. Here, this manuscript demonstrates the unique structural and electronic properties of sub-nano Cu oxide clusters and illustrates the critical roles of configuration ensembles and rearrangement to highly reactive metastable cluster isomers in nanocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and Catalytic Properties of Isolated Pt 2+ Sites in Platinum Phosphide (PtP 2 )

This article describes the synthesis and catalytic properties of supported, 2-3 nm platinum phosphide (PtP 2 ) nanoparticles (NPs). Depending on the P loading, two PtP 2 structures are formed, that is, a PtP 2 surface on a (metallic) Pt core (Pt@PtP 2 ) and single-phase PtP 2 NPs. The structures were determined using extended X-ray absorption fine structure , in situ synchrotron X-ray diffraction, and scanning transmission electron microscopy. In PtP 2 NPs, Pt 2+ ions are geometrically isolated by P 2 2- ions, at a Pt-Pt distance of 4.02 Å, which is much longer than 2.78 Å in (metallic) Pt NPs. The oxidation state of Pt in PtP 2 NPs was determined by in situ X-ray absorption near-edge structure and in situ X-ray photoelectron spectroscopy and was found to be consistent with Pt 2+ ions even after treatment in H 2 at 550 °C. Unlike Pt NPs, which are highly active for propylene hydrogenation at room temperature, PtP 2 NPs are not active below about 150 °C, suggesting the absence of metallic surface Pt. In contrast to metallic Pt, which is poorly selective for acetylene hydrogenation, PtP 2 NPs display high selectivity toward ethylene. PtP 2 , also has high olefin selectivity for propane dehydrogenation, although the rate per g Pt is about 7 times lower than that of metallic Pt NPs of the same size. In situ resonant inelastic X-ray scattering spectroscopy shows that the energy of the filled Pt 5d valence orbitals is 1.5 eV lower than that of metallic Pt, which leads to weaker adsorbate binding consistent with its catalytic properties. Here, a H 2 -stable Pt 2+ site suggests different catalytic applications for these catalysts as compared to Pt NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Methanol Decomposition on Copper Surfaces under Ambient Conditions: Mechanism, Surface Kinetics, and Structure Sensitivity

Here, we study the adsorption of methanol vapor under ambient pressure and temperature conditions on low-index Cu surfaces using surface-sensitive infrared (IR) and X-ray spectroscopy techniques. The first step of methanol decomposition, i.e. , breaking of the O—H bond to form surface-bound methoxy, readily occurs under ambient conditions. Time-lapse IR spectra clearly indicate a gradually decreasing methoxy coverage, which does not obey well established kinetic models. We rationalize the initial temperature-independent, high, nonequilibrium coverage of methoxy by a H-bonded methanol assembly in the precursor state. A temperature-dependent equilibrium coverage is achieved as the excess methoxy is eliminated gradually via further dehydrogenation to CO that desorbs to the gas phase. The kinetics of this process displays a significant structure sensitivity with considerably faster kinetics on the Cu(110) surface compared to Cu(111) and Cu(100) surfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

A Coverage Self-Consistent Microkinetic Model for Vapor-Phase Formic Acid Decomposition over Pd/C Catalysts

An iterative approach utilizing density functional theory (DFT, PW91-GGA)-informed mean-field microkinetic models and reaction kinetics experiments is used to determine the reaction mechanism and the active site for formic acid (HCOOH, FA) decomposition over a Pd/C catalyst. Models parametrized using DFT energetics on clean Pd(100) and Pd(111) required large corrections to the DFT energetics for capturing our experimental data. Further, both Pd(111) and Pd(100) models predicted a high coverage of adsorbed CO (CO*), inconsistent with the assumption of a clean surface at which the rate parameters for these models were calculated. To better represent the active site under reaction conditions and explicitly account for the presence of CO*, subsequent microkinetic models were formulated using DFT energetics that were calculated on partially (5/9 ML) CO*-covered Pd (111) and (100) facets. Upon parameter adjustment, the resultant 5/9 ML CO*-covered Pd(100) model, although consistent in terms of CO* coverage, was unable to capture the dehydration path measured in the experiments and was, therefore, deemed not to offer an accurate representation of the active site for FA decomposition over Pd/C. In contrast, a partially CO*-covered Pd(111) model was better at representing the catalytic active site, as in addition to being consistent in terms of CO* coverages, it required small adjustments of the DFT parameters to accurately capture the experimental data set (both dehydrogenation and dehydration). Our results suggest that the reaction occurs via the spectroscopically elusive carboxyl (COOH*) intermediate and that spectator CO*-assisted decomposition pathways play an important role under typical experimental conditions. In addition, our study highlights the importance of striving for coverage self-consistent microkinetic models and for including spectator-assisted mechanisms in order to develop an improved picture of the active site under reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rigorous Oxidation State Assignments for Supported Ga-Containing Catalysts Using Theory-Informed X-ray Absorption Spectroscopy Signatures from Well-Defined Ga(I) and Ga(III) Compounds

Gallium-based heterogeneous catalysts originally developed for commercial use in propane dehydroaromatization have been explored extensively as potential replacements for Pt- and Cr-based catalysts used in propane dehydrogenation for on-demand propylene production. In a large number of experimental and theoretical studies, active sites with a variety of Ga nuclearities, coordination environments, and oxidation states have been proposed. Isolated Ga(I) ions are often invoked, despite the scarcity of well-defined molecular species and their well-documented instability. In this study, we investigate the appearance of a high-intensity, low-energy white line at the Ga K-edge upon reduction of Ga/HZSM-5 by H 2 at a temperature of ca. 500 °C, accompanied by a dramatic reduction in the extended X-ray absorption fine structure (EXAFS) intensity. In contrast, Ga/γ-Al 2 O 3 does not show such behavior. In order to lay a rigorous foundation for characterizing these types of systems and to establish experimental signatures for the elusive Ga(I) oxidation state, we recorded Ga K-edge X-ray absorption spectra [including high-energy-resolution fluorescence detection-X-ray absorption near-edge spectroscopy (HERFD-XANES)] for several well-defined molecular and crystalline Ga(I) compounds. XANES is essential to establishing the presence of Ga(I), despite the overlap in edge energies with organoGa(III) compounds, because Ga(I)-containing oxide materials show very weak EXAFS scattering. Compared to the XANES of trigonal Ga(III)-containing materials, Ga(I) spectra display a significantly more intense white line feature. Theoretical simulations agree well with this experimental observation and reveal that the strong XANES intensity originates from the superposition of transitions to several empty, nearly degenerate p-like states. Finally, these signatures provide compelling evidence for assigning the intense white line and dramatic loss of EXAFS intensity in Ga/HZSM-5 to the near-quantitative reduction of Ga(III) to Ga(I), while the weaker white line and conventional EXAFS signal of Ga/γ-Al 2 O 3 point to, at most, a minor fraction of Ga(I) sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗