Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Engineering Electrical Transport by Implantation‐Induced Defects in CrN Films Without Affecting Thermal Conductivity

The transport properties of CrN thin films deposited on sapphire have been tailored through structural modifications induced by cumulative argon implantation. As-grown samples experience the typical structural transition in CrN films from orthorhombic at low temperature to cubic above the Néel temperature (≈280 K) and exhibit a metallic-like conduction in both phases. With increasing implantation dose, the conduction mode shifts to a semiconductor-like behavior in both phases, albeit at different damage levels. Analysis of the results suggests that hopping conduction becomes dominant beyond a given damage threshold. The results highlight a promising correlation between defect engineering and conduction mechanisms, offering valuable insights into the versatile electrical properties of CrN films. These implantation-induced defects scatter carriers, leading to a decrease in their mobility. As the implantation dose increases, the defect landscape evolves, modifying the density of states. However, up to a dose of 0.050 dpa, no significant influence on phonon scattering is observed. This approach demonstrates that ion implantation enables precise tuning of CrN's electrical properties without affecting thermal conductivity, offering valuable insights into defect engineering in transition metal nitrides and underscoring its potential for transport properties decorrelation.

defects↗
DOE OSTI2024

Reliability of Materials and Components for Solid Oxide Fuel Cells

Planar stack solid-oxide fuel cells (SOFCs) require seals that must operate reliably under demanding conditions for lifetimes of 40000 hours. This includes temperature fluctuations between 800°C and RT during on and off cycles, thermal stresses, oxidizing environments and chemical degradation to name a few. This comprehensive report provides results from long term testing of two commercially available multicomponent barium alkali silicate glasses: SCN and G6, chosen as sealing candidates. In this scope, the glass seals were deposited on YSZ and Al 2 O 3 substrates simulating electrolytes (Zrbased) and coatings (both zirconia and Al 2 O 3 ). The seal-substrate couples were subjected to 800°C under air and steam+H 2 +N 2 environments up to 40000 hours to test their integrity under real operating conditions. Extensive studies on the effects of exposure have been conducted over the span of testing at various time intervals. Within the context of characterization, mechanical properties such as density, roughness, thermal expansion and glass transition, viscosity and wettability behavior; and microstructural properties such as glass chemistries, defect formation (cracks and pores), phase transformations (devitrification) and glass-interface reactions are investigated. Results and discussions are provided with a focus on the degradation of the properties over long term interrupted testing.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Single-Particle Insights Into the Electronic Structure and Enhanced Stability of CsPbBr 3 /FAPbBr 3 Core/Crown Nanoplatelets at the Nanometer Scale

Colloidal perovskite nanoplatelets (NPLs), despite their exceptional optoelectronic properties, face significant challenges due to their intrinsic instability and trap-assisted non-radiative recombination. Although many studies employing surface engineering, such as selecting ligands or coating to passivate defects, have demonstrated improved optoelectronic properties, these enhancements are typically inferred from bulk-ensemble measurements; the effects at the single-particle level remain elusive. Here, we conduct single-particle-level studies using scanning tunneling spectroscopy (STS) on a unique core–crown system, CsPbBr 3 @FAPbBr 3 NPLs, where the lateral surfaces of the CsPbBr 3 core are coated with an FAPbBr 3 crown. Experimental density-of-states (DOS) analysis reveals a 47% reduction in deep-trap states in core-crown NPLs compared to core-only NPLs, consistent with nearly two-fold enhancements in photoluminescence quantum yields. Progressive I–V sweep measurements demonstrate superior electrical stability in core-crown NPLs, preserving band structure with minimal degradation, while core-only NPLs exhibit rapid bandgap shrinkage and trap formation. Density functional theory (DFT) calculations indicate that FA incorporation distorts Pb octahedral lattice, widening the bandgap. This study elucidates how surface engineering modulates charge localization, passivates defects, and enhances stability at the single-particle level. Moreover, by uncovering bias-induced trap states in single unpassivated NPLs, this study establishes a precise, robust approach for characterizing emerging perovskite nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Understanding Formation of Irradiation-Induced Defects through 4D-STEM, Electron Tomography, and WBDF-STEM

A major challenge in advancing nuclear materials for next-generation fission and proposed fusion reactors is to comprehensively understand the formation of irradiation-induced defects. Here it is essential to correlate the evolution of irradiation-induced defects and the degradation of mechanical properties, as they collectively dictate the material's lifespan and ensure nuclear safety. Scanning transmission electron microscopy (STEM) based techniques have emerged as indispensable tools for irradiation-induced defect characterization, offering high spatial resolution imaging and chemical analysis, such as electron energy loss spectroscopy (EELS) and energy dispersive X-ray spectroscopy (EDXS). These techniques have been effectively used to obtain an atomic-scale view of the defect structure. Recent advances in electron microscopy, particularly in 4D-STEM, offer detailed insight into microstructural evolution by capturing full 2D diffraction patterns at every pixel position. Using high-speed direct electron detectors, this technology generates a four-dimensional dataset, overcoming the limitations of traditional STEM imaging.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fracture‐Resistant and Thermally Insulating Ultrahigh‐Temperature Carbide Foams

Dense ultrahigh‐temperature ceramics (UHTCs) carbides are recognized as potential materials for thermal protection systems (TPS) owing to properties beyond existing structural materials’ capabilities. Recent advances in UHTCs have enabled the development of multiscale porous microstructures. Herein, it is highlighted that the porosity in UHTCs are no longer treated as a defect but as a functional property specifically tailored for thermal insulation. It is a promising solution to design and fabricate bulk UHTC foams via a freeze‐drying (FD) approach followed by calibrated pressureless spark plasma sintering. Herein, monolithic TaC and HfC UHTC foams and their composite show the partial solid–solution formation of (Ta, Hf)C with porosity ≥50%. TaC–HfC foam (≈80–92 N) shows an intermediate load‐bearing capability compared to monolithic TaC (≈120–135 N) and HfC (≈28–35 N) foams, with no evident cracking on the sample surface. The thermal conductivity of partial solid‐solution TaC–HfC foam increases up to fivefold compared to parent UHTC foams. In the results, solid solutions’ efficacy and pores’ unidirectionality in providing thermal insulation to TaC–HfC while maintaining its high‐load bearing capability are illustrated. In conclusion, the developed technique establishes a new paradigm shift in UHTCs, expanding their potential for TPS in extreme environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Irradiation-enhanced diffusion and diffusion-limited creep in U 3 Si 2

U 3 Si 2 is an advanced fuel candidate due to its relatively high fissile density and attractive thermal properties. Compared to standard UO 2 fuel, there are significant data gaps for the thermophysical and thermomechanical properties of U 3 Si 2 . Point defect concentrations and mobilities under irradiation govern a number of important fuel performance properties, such as creep and fission gas release. In this work, we utilized density functional theory (DFT) data to inform a cluster dynamics framework to predict point defect concentrations in U 3 Si 2 under irradiation. Molecular dynamics (MD) simulations were used to examine the contribution of atomic mixing during ballistic cascades to diffusion, as well as the diffusivity of U and Si at grain boundaries. These atomic scale models for diffusivity were then used to inform a creep model based on bulk (Nabarro-Herring) and grain boundary (Coble) diffusional creep, and climb-limited dislocation creep. The model compares well against available experimental data and has been implemented in the BISON fuel performance code. Finally, a demonstration case using simple power profiles has been carried out, showing that negligible creep occurs due to the low temperatures experienced by U 3 Si 2 in-reactor, a consequence of its high thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

A step forward from high-entropy ceramics to compositionally complex ceramics: a new perspective

High-entropy ceramics (HECs) have quickly gained attention since 2015. To date, nearly all work has focused on five-component, equimolar compositions. This perspective article briefly reviews different families of HECs and selected properties. Following a couple of our most recent studies, we propose a step forward to expand HECs to compositionally-complex ceramics (CCCs) to include medium-entropy and/or non-equimolar compositions. Here, using defective fluorite and ordered pyrochlore oxides as two primary examples, we further consider the complexities of aliovalent cations and anion vacancies as well as ordered structures with two cation sublattices. Better thermally-insulating yet stiff CCCs have been found in non-equimolar compositions with optimal amounts of oxygen vacancies and in ordered pyrochlores with large size disorder; it is demonstrated that medium-entropy ceramics (MECs) can prevail over their high-entropy counterparts. The diversifying classes of CCCs provide even more possibilities than HECs to tailor the composition, defects, disorder/order, and consequently various properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Defects and anomalies in powder bed fusion metal additive manufacturing

Metal additive manufacturing is a disruptive technology that is revolutionizing the manufacturing industry. Despite its unrivaled capability for directly fabricating metal parts with complex geometries, the wide realization of the technology is currently limited by microstructural defects and anomalies, which could significantly degrade the structural integrity and service performance of the product. Accurate detection, characterization, and prediction of these defects and anomalies have an important and immediate impact in manufacturing fully-dense and defect-free builds. As such, this review seeks to elucidate common defects/anomalies and their formation mechanisms in powder bed fusion additive manufacturing processes. They could arise from raw materials, processing conditions, and post-processing. While defects/anomalies in laser welding have been studied extensively, their formation and evolution remain unclear. Additionally, the existence of powder in powder bed fusion techniques may generate new types of defects, e.g., porosity transferring from powder to builds. Practical strategies to mitigate defects are also addressed through fundamental understanding of their formation. Such explorations enable the validation and calibration of models and ease the process qualification without costly trial-and-error experimentation.

42 ENGINEERING↗
DOE OSTI2025

Effects of hydrogen on sputter-deposited boron carbide films

Sputter deposition of B 4 C films requires precise control over the microstructure and the nucleation and growth of nodular defects. Here, we study the properties of B 4 C films deposited with substrate holder temperatures of 250, 450, or 510 °C and different substrate tilt angles by direct-current magnetron sputtering in either pure Ar or a mixture of 4% H 2 in Ar as the working gas. Results show that the addition of H 2 reduces the impedance of the plasma discharge, resulting in larger discharge currents at constant power, which is attributed to a lower ionization potential of H 2 than Ar. More importantly, films deposited with the H 2 containing plasma exhibit lower oxygen impurity incorporation, a lower density of nodular defects, and suppressed columnar microstructure. These results demonstrate the effectiveness of such a plasma doping approach to improve the properties of B 4 C films.

Wong, M. S. [Lawrence Livermore National Laborator↗
DOE OSTI2026

Towards dislocation-driven quantum interconnects

A central problem in the deployment of quantum technologies is the realization of robust architectures for quantum interconnects. We propose to engineer interconnects in semiconductors and insulators by patterning spin qubits at dislocations, thus forming quasi one-dimensional lines of entangled point defects. To gain insight into the feasibility and control of dislocation-driven interconnects, we investigate the optical cycle and coherence properties of nitrogen-vacancy (NV) centers in diamond, in proximity of dislocations, using a combination of advanced first-principles calculations. We show that one can engineer spin defects with properties similar to those of their bulk counterparts, including charge stability and a favorable optical cycle, and that NV centers close to dislocations have much improved coherence properties. Finally, we predict optically detected magnetic resonance spectra that may facilitate the experimental identification of specific defect configurations. Our results provide a theoretical foundation for the engineering of one-dimensional arrays of spin defects in the solid state.

Materials science↗
DOE OSTI2022

Exploration of two surfaces observed in Weyl semimetal BaMnSb 2

Single crystalline BaMnSb 2 is considered as a 3D Weyl semimetal with the 2D electronic structure containing Dirac cones from the Sb sheet. We report experimental investigation of low-temperature cleaved BaMnSb 2 surfaces using scanning tunneling microscopy/spectroscopy and low energy electron diffraction. By natural cleavage, we find two terminations: one is Ba (above the orthorhombically distorted Sb sheet) and another Sb2 (at the surface of the Sb/Mn/Sb sandwich layer). Both terminations show the 2×1 surface reconstructions, with drastically different morphologies and electronic properties, however. The reconstructed structures, defect types and nature of the electronic structures of the two terminations are extensively studied. The quasiparticle interference (QPI) analysis is conducted at the energy range between -2 V and 2 V, although no interesting states are observed near the Fermi level, the surface-projected electronic band structures strongly depend on the surface termination above 1.6 V. The existence of defects can greatly modify the local density of states to create electronic phase separations on the surface in the order of tens of nm scale. Our observation on the atomic structures of the terminations and the corresponding electronic structures provides critical information towards an understanding of topological properties of BaMnSb 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Defect-induced states, defect-induced phase transition, and excitonic states in bent tungsten disulfide (WS 2 ) nanoribbons: Density functional vs. many body theory

Two-dimensional (2D) transition metal dichalcogenide (TMD) materials have versatile electronic and optical properties. TMD nanoribbons exhibit interesting properties due to reduced dimensionality, quantum confinement, and edge states, which make them suitable for various electronic and optoelectronic applications. In a previous work conducted by our group, we demonstrated that the edge bands evolved with bending can tune the optical properties for various widths of TMD nanoribbons. Defects are commonly present in 2D TMD materials, and can dramatically change the material properties. Here, in this following work, we investigate the interaction between the edge and the defect states in tungsten disulfide (WS 2 ) nanoribbons with lines of W- or S-atom vacancies defects under different bending conditions, using density functional theory (DFT). To gain understanding about the limits of density functional approximations, we compare results on band gaps and energies of defect states with quasiparticle GW. We reveal interesting semiconductor-metal phase transitions, suggesting potential applications in nanoelectronics or molecular electronics. We also calculate the optical absorption of the bent and defective nanoribbons with the many-body GW-BSE (Bethe-Salpeter equation) approach, revealing a tunable optical spectrum and diverse exciton states in the defective WS 2 nanoribbons.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Physics-Based Model to Represent Membrane-Electrode Assemblies of Solid-Oxide Fuel Cells Based on Gadolinium-Doped Ceria

This paper reports a physics-based model that predicts membrane-electrode assembly (MEA) performance of solid-oxide fuel cells (SOFCs) with Ce 0.9 Gd 0.1 O 2− δ (GDC10) electrolyte membranes. The paper derives self-consistent thermodynamic and transport properties for GDC1o mobile charged defects (oxide vacancies and reduced-ceria small polarons) by fitting published measurements of oxygen non-stoichiometry and conductivity over ranges of temperature and O 2 partial pressures. The button-cell model is applied to evaluate how mixed ionic-electronic conductivity influences the performance of an SOFC MEA with a GDC10 electrolyte sandwiched between a porous, composite Ni-GDC10 anode and a porous, composite cathode of Sm 0.5 Sr 0.5 CoO 3− δ (i.e., SSC) and GDC10. SSC properties are also derived by fitting published conductivity and oxygen non-stoichiometry measurements. Mixed conductivity of GDC10 and competing charge transfer reactions at both electrodes reduce open circuit voltages due to leakage current and buildup of defect concentrations at electrode-electrolyte interfaces. To fit polarization data, the button-cell model includes heterogeneous reaction rates for defect incorporation on the GDC10 surface along with Butler–Volmer expressions derived for competing charge transfer reaction rates from rigorous analyses assuming rate-limiting, elementary charge transfer reactions for each electrode. The calibrated MEA model can support rigorous SOFC modeling with GDC10 electrolytes over the range of conditions within a fully operating cell.

Electrochemistry↗
DOE OSTI2024

Critical Review of LPBF Metal Print Defects Detection: Roles of Selective Sensing Technology

The integrative potential of LPBF-printed parts for various innovative applications depends upon the robustness and infallibility of the part quality. Eliminating or sufficiently reducing factors contributing to the formation of defects is an integral step to achieving satisfiable part quality. Significant research efforts have been conducted to understand and quantify the triggers and origins of LPBF defects by investigating the material properties and process parameters for LPBF-printed geometries using various sensing technologies and techniques. Frequently, combinations of sensing techniques are applied to deepen the understanding of the investigated phenomena. The main objectives of this review are to cover the roles of selective sensing technologies by (1) providing a summary of LPBF metal print defects and their corresponding causes, (2) informing readers of the vast number and types of technologies and methodologies available to detect defects in LPBF-printed parts, and (3) equipping readers with publications geared towards defect detection using combinations of sensing technologies. Due to the large pool of developed sensing technology in the last few years for LPBF-printed parts that may be designed for targeting a specific defect in metal alloys, the article herein focuses on sensing technology that is common and applicable to most common defects and has been utilized in characterization for an extended period with proven efficiency and applicability to LPBF metal parts defect detection.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Morphological-informed Thermal Property Prediction in the Engineering Domain

Using first-principle, atomic scale methods to predict thermal carrier (electron and phonon) behavior at nanoscale yields highly resolved thermal properties. Density functional theory simulations can model myriad effects on the transport of phonons and electrons (e.g., phonon and electron coupling, electron correlation, defect presence, carrier scattering), and yield thermal properties for small geometric domains such as thermal and electrical conductivity, or heat capacity. While these thermal properties are accurate in atomistic and nanoscopic systems, they must be scaled up to the microstructural domain to be a useful predictor for experimental basis, as the microscale is where myriad changes and physical phenomenon occur within a material (e.g., grain boundaries, precipitate aggregations, interfaces, defect clusters). My talk will discuss the necessity of thermal property predictions for nuclear fuels applications and more. Additionally I will discuss the necessity in developing multi-physics, multi-scale methods for future applications in predictions for not only nuclear fuels, but other materials applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A deep learning model for automatic analysis of cavities in irradiated materials

Transmission electron microscopy (TEM) is a commonly used technique in materials science for defect investigation. Quantitative analysis of defects is important for understanding the properties of a material, but manual analysis of TEM micrographs can be time-consuming and prone to error, especially when the defects have irregular shapes rather than spherical shapes. Many existing methods or deep learning models do not handle a wide range of sizes for the same object type within a single image. In this work, we present a framework that enables users to train an instance segmentation model called Mask R- CNN on any microstructure dataset, perform multi-detection on the same image at different scales, and obtain properties (e.g., size, area) of the objects based on the desired shape (e.g., circle, ellipse, rectangle). Additionally, we have developed a parallel detection module that uses multiple GPUs to increase the efficiency of the object detection process. We demonstrate the capabilities of our framework using a set of TEM images of cavities with different shapes, size distributions, and background contrasts. Finally, we show that the performance of our model in terms of density, size, and swelling of the cavities is comparable to the human average and that our model achieves the highest recall value compared to existing methods due to the use of image multi-rescaling.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-fidelity micromechanical modeling of the effects of defects on damage and creep behavior in single tow ceramic matrix composite

Despite the superior properties of ceramic matrix composites (CMCs), their fabrication process generates inevitable defects with high density that significantly influence material integrity and residual useful life. Recent efforts have focused on CMC property prediction and investigation of their different inelastic mechanisms, but very limited work exists on understanding the influence of defects on inelastic responses of CMCs. Here, we introduce a three-dimensional micromechanics computational framework that includes experimentally informed material microstructure and architectural variabilities to investigate CMC response in the presence of manufacturing-induced defects. A developed microstructure generation algorithm is used to generate the representative volume elements in the micromechanics models from complex material morphology information obtained from extensive characterization studies of C/SiNC and SiC/SiNC CMCs. A fracture mechanics-informed matrix damage model is reformulated, in which the model considers the growth of porosity and microcracks in the as-received material. A progressive fiber damage model as well as Orthotropic viscoplasticity creep formulation are also utilized for the study. This methodology is implemented within the micromechanics framework to investigate the complex temperature- and time-dependent load transfer and damage mechanisms of CMCs under operation loading conditions. The developed framework explores the influence of as-received defects on the damage and creep behavior in service conditions. It also provides new insights into the effect of size, shape, distribution, and location of these defects on material response. The framework is then calibrated with unidirectional CMC minicomposite results available in the literature.

36 MATERIALS SCIENCE↗