SEARCH · Engineering Papers

Results for “Damping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Investigation of empirical damping laws for the space shuttle

An analysis of dynamic test data from vibration testing of a number of aerospace vehicles was made to develop an empirical structural damping law. A systematic attempt was made to fit dissipated energy/cycle to combinations of all dynamic variables. The best-fit laws for bending, torsion, and longitudinal motion are given, with error bounds. A discussion and estimate are made of error sources. Programs are developed for predicting equivalent linear structural damping coefficients and finding the response of nonlinearly damped structures.

Bernstein, E. L.↗

NASA NTRS1973

Wind-tunnel roll-damping measurements of a winged space shuttle configuration in launch attitude

Ground-wind load studies were conducted on three model configurations to assess the importance of aeroelastic instabilities of erected space shuttle vehicles. Roll damping was measured on a fuselage-alone model, which had a D cross section, and a fuselage and tail surfaces in combination with either a clipped-delta wing or a low-sweep tapered wing as the primary lifting surface. The largest negative roll-damping coefficients were measured with the fuselage-alone configuration and were a function of wind azimuth. At the wind azimuths at which the wing-fuselage configuration was unstable, the negative roll-damping coefficients were a function of reduced frequency.

Hess, R. W.↗

NASA NTRS1974

An experimental investigation of the damping contribution of an elastomeric ablator on aluminum beams

Damping results are presented for an elastometric ablation material bonded to an aluminum alloy substrate. Tests were conducted on aluminum beams 0.159, 0.318, and 0.476 cm thick, and with and without an ablator. Ablation-material thickness varied from 0.159 to 0.953 cm. Comparative damping data were obtained by using variations of the free-free beam technique with strain gages and piezoelectric transducers. Of the two test arrangements employed, the technique using strain gages produced results that indicated less restraint of the beams. Ablation material, in thicknesses less than 1 cm, substantially increased the damping parameter of the aluminum beams.

Howell, W. E.↗

NASA NTRS1974

Random vibrations of quadratic damping systems

An oscillating system with quadratic damping subjected to white noise excitation is replaced by a nonlinear, statistically equivalent system for which the associated Fokker-Planck equation can be exactly solved. The mean square responses are calculated and the optimum damping coefficient is determined with respect to the minimum mean square acceleration criteria. An application of these results to the optimization of automobile suspension damping is given.

Sireteanu, T.↗

NASA NTRS1974

Damping synthesis from substructure tests

A new method is proposed for synthesizing structural damping from substructure test data. It utilizes the off-diagonal coupling terms in the substructure modal damping matrices as well as the diagonal terms which correspond to uncoupled modal damping. The coupling terms are evaluated from complex resonant response measured at each substructure mode. Both analytical and experimental verification of the method have been made. Accuracy requirements on experimental data and data reduction have been established.

Hasselman, T. K.↗

NASA NTRS1974

Aerodynamic damping and oscillatory stability of a model of a proposed HL-10 vehicle in pitch at Mach numbers from 0.20 to 2.86 and in YAW at Mach numbers from 0.20 to 1.20

Wind tunnel tests of a proposed HL-10 lifting body vehicle were conducted to determine the subsonic and transonic aerodynamic characteristics. The conditions under which the tests were conducted are described. The tests indicate that the configuration has slightly positive damping in pitch except at higher angles of attack at Mach numbers of 0.8, 0.9, and 1.0. At supersonic speeds, the configuration has positive damping in pitch for all test conditions. At subsonic and transonic speed, the configuration has positive damping and positive stability in yaw for all test conditions.

Kilgore, R. A.↗

NASA NTRS1975

Aerodynamic damping and oscillatory stability in pitch of a model of a proposed manned lifting entry vehicle at Mach Numbers of 1.80, 2.16, and 2.86

Wind tunnel tests were conducted using a model of a proposed manned lifting entry vehicle to determine the aerodynamic damping and oscillatory stability in pitch. The model was tested at Mach numbers of 1.80, 2.16, and 2.86. Angles of attack varied from minus 2 degrees to plus 30 degrees at zero angle of sideslip using a small-amplitude, forced-oscillation technique. It was determined that, in general, all the configurations have near zero or slightly positive damping in pitch throughout the angle of attack range. The effects of the deflection of flaps on aerodynamic damping are discussed.

Kilgore, R. A.↗

NASA NTRS1975

Experimentally determined stiffness and damping of an inherently compensated air squeeze-film damper

Values of damping and stiffness were determined experimentally for an externally pressurized, inherently compensated, compressible squeeze-film damper up to excitation frequencies of 36,000 cycles per minute. Experimental damping values were higher than theory predicted at low squeeze numbers and less than predicted at high squeeze numbers. Experimental values of air film stiffness were less than theory predicted at low squeeze numbers and much greater at higher squeeze numbers. Results also indicate sufficient damping to attenuate amplitudes and forces at the critical speed when using three dampers in the flexible support system of a small, lightweight turborotor.

Cunningham, R. E.↗

NASA NTRS1975

In-flight damping measurement

A new testing technique is described which can be applied in determining the damping coefficient of the critical vibration modes of an airplane in flight. The damping coefficient can be determined in several different ways from the same data using different features of a modified response curve which implies the possibility of checking one value against the other. The method introduces the effect of sweep rate in the driving system. This effect on the frequency response curve of the critical vibration mode and its various characteristics are used in the determination of damping coefficient. A theoretical examination is made of these characteristics for single degree of freedom systems.

Sanderson, G. E.↗

NASA NTRS1976

The acceleration of energetic particles in the interplanetary medium by transit-time damping

Transit time damping is examined as a possible means for accelerating low energy particles in co-rotating streams and interstellar ions. Data show that: the protons in co-rotating streams may be accelerated by transient-time damping the small-scale variations in the field magnitude that are observed at a low level in the inner solar system. The interstellar ions may be accelerated by transit time damping large-scale field variations in the outer solar system.

Fisk, L. A.↗

NASA NTRS1976

Numerical determination of the transmissibility characteristics of a squeeze film damped forced vibration system

Numerical solutions of the governing equations of motion of a liquid squeeze film damped forced vibration system were carried out to examine the feasibility of using a liquid squeeze film to cushion and protect large structures, such as buildings, located in areas of high seismic activity. The mathematical model used was that for a single degree of freedom squeeze film damped spring mass system. The input disturbance was simulated by curve fitting actual seismic data with an eleventh order Lagranging polynomial technique. Only the normal component of the seismic input was considered. The nonlinear, nonhomogeneous governing differential equation of motion was solved numerically to determine the transmissibility over a wide range of physical parameters using a fourth-order Runge-Kutta technique. It is determined that a liquid squeeze film used as a damping agent in a spring-mass system can significantly reduce the response amplitude for a seismic input disturbance.

Sutton, M. A.↗

NASA NTRS1977

Effects of damping on mode shapes, volume 2

Displacement, velocity, and acceleration admittances were calculated for a realistic NASTRAN structural model of space shuttle for three conditions: liftoff, maximum dynamic pressure and end of solid rocket booster burn. The realistic model of the orbiter, external tank, and solid rocket motors included the representation of structural joint transmissibilities by finite stiffness and damping elements. Data values for the finite damping elements were assigned to duplicate overall low-frequency modal damping values taken from tests of similar vehicles. For comparison with the calculated admittances, position and rate gains were computed for a conventional shuttle model for the liftoff condition. Dynamic characteristics and admittances for the space shuttle model are presented.

Gates, R. M.↗

NASA NTRS1978

Modeling structural damping for solids having distinct shear and dilatational loss factors

For steady state time harmonic problems (rigid format 8), the NASTRAN program as currently configured treats internal structural damping through the introduction of a single structural element damping coefficient that typically is viewed as the ratio of the complex to real modulus of elasticity. For problems dealing with two or three dimensional dynamic linear viscoelasticity (e.g. a Kelvin-Voigt viscoelastic model), the present NASTRAN capability cannot directly handle this situation wherein two independent damping coefficients are required to properly model the dissipation phenomenon. A technique is presented whereby the user can adapt the standard versions of NASTRAN (without resorting to either DMAP and/or FORTRAN coding changes) for the purpose of treating this class of problem.

Kalinowski, A. J.↗

NASA NTRS1980

Active damping of modal vibrations by force apportioning

Force apportioning, a method of active structural damping based on that used in modal vibration testing of isolating modes by multiple shaker excitation, was analyzed and numerically simulated. A distribution of as few forces as possible on the structure is chosen so as to maximally affect selected vibration modes while minimally exciting all other modes. The accuracy of numerical simulations of active damping, active damping of higher-frequency modes, and studies of imperfection sensitivity are discussed. The computer programs developed are described and possible refinements of the research are examined.

Hallauer, W. L., Jr.↗

NASA NTRS1980

Physical explanations of the destabilizing effect of damping in rotating parts

The destabilizing effect of rotating damping was investigated. When the rotation was faster than the whirl, rotating damping drags the orbiting particle forward. When stationary damping was also present, the stability borderline was readily determined by balancing the backward and forward drags. A key notion was that a forward whirl at rate omega a sub n with respect to stationary axes appears to be a backward whirl at rate Omega - omega sub n with respect to a system rotating supercritically at rate Omega. The growth rate of unstable whirls (or the decay rate of stable whirls was readily estimated by a simple energy balance.

Crandall, S. H.↗

NASA NTRS1980

Active damping of modal vibrations by force apportioning

The theory and numerical simulation of active structural damping is described which requires few discrete control thrusters positioned on the structure. A particular apportioning of coherently phased control forces is applied for each vibration mode which is to be damped; this strongly affects the damped vibration mode, while minimally exciting all other modes. The force apportioning used is that which would tune a target mode if the structure was being shaken in a model vibration test. In contrast to model testing, the forces are varied temporally so as to dampen, rather than excite, the target mode(s).

Hallauer, W. L., Jr.↗

NASA NTRS1980

Preliminary measurements of aerodynamic damping of a transonic compressor rotor

The aeroelastic behavior of a transonic compressor rotor operated in the MIT Blowdown Compressor Facility has been examined by means of piezoelectric motion sensors at the base of each of the 23 blades. Excitation has been observed due to rotating stall, due to an incipient flutter, and due to the facility startup transient. A method has been found for determining the aerodynamic damping force by modal analysis of the blade motion. Application of this technique to the example of excitation by rotating stall has led to the conclusions that the blade loading decreases in the stall cell, and that the damping force on the blades in the clean flow is in phase with blade velocity but opposite it in sign, leading to a logarithmic decrement of 0.2. This method of force derivation has quite general applicability as it requires only blade motion data such as are routinely acquired with strain gages. It is argued that models are needed for aerodynamic damping which focus on the effects of near neighbors of a given blade, since flutter often results in large response of isolated blades or small groups of blades.

Crawley, E. F.↗

NASA NTRS1981

The damping of ocean surface waves by a monomolecular film measured by wave staffs and microwave radars

Open ocean and wave tank experiments were carried out with the aim of studying the damping of capillary and gravity waves by a monomolecular film. These films of biogenic origin influence air-sea interaction processes and thereby affect the use of remote sensing techniques in oceanography. Measurement was carried out by wave staffs, by a coherent X band microwave scatterometer mounted on a sea-based platform, and by an incoherent K band microwave scatterometer carried by an aircraft under moderate wind conditions. A wave attenuation of about 40-60% is observed in the frequency range between 3.2 and 16 Hz. Tank experiments show that a direct influence of oleyl alcohol surface films on wave damping is confined to frequencies equal to or greater than 2 Hz; a further indirect effect of films on the damping of ocean waves in the frequency range between 0.12 and 0.7 Hz (by modifying the wind input and wave-wave interaction mechanisms) is also indicated

Huehnerfuss, H.↗