Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIVERTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

The topology of non-resonant stellarator divertors

We apply topological methods to better understand how the magnetic field in the stellarator edge can be diverted away from the confined region. Our primary method is calculating the winding numbers of closed contours, which gives information on the number and nature of fixed points within a bounded region. We first apply this to the non-resonant divertor Hamiltonian system, and present a simple explanation for the system’s diversion: trajectories are guided away from the confined region by X-points which are ‘unpaired’ i.e. do not have corresponding O-points and therefore do not resemble an island chain. We show how similar phenomena can occur in a similar, axisymmetric Hamiltonian system. Secondly, we find examples of neoclassically optimised stellarators in the quasi-symmetric stellarator repository database which divert the magnetic field via unpaired X-points. We present and discuss three examples, each containing novel phenomena which might be desirable for stellarator divertors. These examples serve as an illustration of new divertor possibilities which exist in realistic stellarators, which may ultimately have application for future experiments and reactors.

X-points, topology↗

Experimental evaluation of the vapor box divertor concept with an open vapor box module in Magnum-PSI

A promising approach to handle the intense plasma heat flux in the divertor region of a tokamak is the Vapor Box Divertor (VBD). Here plasma-lithium interaction creates a dense lithium vapor cloud which interacts with the incoming plasma, effectively shielding the tungsten surface beneath, therefore preventing overheating and sputtering of the tungsten and increasing the component’s lifetime. Two key steps must be addressed to validate this concept: investigating plasma-Li interactions and the transport mechanism of the latter in the presence of plasma. To explore this, a Vapor Box Module (VBM) has been designed for use with the linear plasma generator Magnum-PSI. The VBM consists of a series of three cylindrical boxes, with Li being evaporated at a controlled temperature in the central box (CB). Divertor-like plasma enters the VBM from an upstream aperture, interacts with the Li vapor cloud and exits through a downstream aperture ultimately impacting a target equipped with a calorimetry system. Optical diagnostics Thomson scattering, Filtered fast camera Imaging and optical emission spectroscopy provided information on plasma parameters in terms of electron density n e , temperature T e and plasma composition before and after this interaction. A significant reduction in plasma power was observed upon the establishment of lithium vaporization determined via cooling water calorimetry and embedded thermocouples at the downstream target. This resulted in a drop of the target temperature from ∼800 °C to ∼350 °C (57%) at the highest applied power (11.1 MW m −2 ) and CB temperature (∼700 °C). Lithium condensation at the side boxes of the VBM in combination with strong plasma momentum transfer effectively prevented upstream migration of lithium, while enhancing Li transport toward the target. The achievement of the two main goals of reducing plasma power and confining the Li in the VBM, are consistent with earlier published preliminary SOLPS-ITER simulations. This study shows that the presence of lithium in a VBD-like configuration can result in a strong reduction of power to the target surface, while at the same time the lithium vapor is effectively confined by the VBM, aided by the incoming plasma, preventing its escape from the VBM geometry. This represents a valuable step toward validating the feasibility of the VBD configuration in future fusion reactors.

Magnum-PSI↗

Tokamak power exhaust with the snowflake divertor: Present results and outstanding issues

Here, a snowflake divertor magnetic configuration (Ryutov in Phys Plasmas 14(6):064502, 2007) with the second-order poloidal field null offers a number of possible advantages for tokamak plasma heat and particle exhaust in comparison with the standard poloidal divertor with the first-order null. Results from snowflake divertor experiments are briefly reviewed and future directions for research in this area are outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical Analysis of Fatigue Behavior of ITER-Like Monoblock Divertor Interlayer Under Coupled Heat Loads

High-confinement mode is a very prominent operation style for future fusion device due to its unique advantages. However, the conjuncted edge localized modes (ELMs) are very difficult to control so that divertor plates are very prone to suffer both stationary high heat flux (HHF) loads of long-pulse operating mode and transient shock loads of ELMs. Most previous researches focus on degradation of plasma facing material (PFM), however, as a layer joining PFM and cooling tube, the soft copper interlayer suffers concentrated thermal stress loads due to mismatched thermal expansion of PFM and cooling tube. Its thermal fatigue behavior under such coupled loads is also of great significance to structural safety of divertor component. With such a motivation, the reduction effects on fatigue life time of a typical interlayer of monoblock divertor under series of coupled HHF and ELMs shock loading conditions are investigated. It is found that: (1) The transient shock feature of ELMs loading is propagated into interlayer with less sharp pattern. The increase of damage induced by coupled ELMs loading is limited in single cycle, while the accumulated damage of multiple consecutive coupled loading cycles is increased nonlinearly. (2) Under the coupled HHF and ELMs loading, the fatigue life time of interlayer is generally decreasing. The magnitude of decrease is increasing nonlinearly with the magnitude of ELMs peak and averaged heat flux. (3) For three characteristic parameters of ELMs shock loading such as frequency, duration and peak heat flux, the peak heat flux and frequency are two parameters more sensitive to determine coupled reduction effects on fatigue lifetime of the interlayer, while for high frequency case, time averaged heat flux takes the lead.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics design requirements for the National Spherical Torus Experiment liquid lithium divertor

Recent National Spherical Tokamak Experiment (NSTX) high-power divertor experiments have shown significant and recurring benefits of solid lithium coatings on plasma facing components (PFCs) to the performance of divertor plasmas in both L- and H-mode confinement regimes heated by high-power neutral beams. The next step in this work is installation of a liquid lithium divertor (LLD) to achieve density control for inductionless current drive capability (e.g., about a 15–25% n e decrease from present highest non-inductionless fraction discharges which often evolve toward the density limit, n e /n GW ~ 1), to enable n e scan capability (×2) in the H-mode, to test the ability to operate at significantly lower density (e.g., n e /n GW = 0.25), for future reactor designs based on the Spherical Tokamak, and eventually to investigate high heat-flux power handling (10 MW/m 2 ) with long pulse discharges (>1.5 s). Finally, the first step (LLD-1) physics design encompasses the desired plasma requirements, the experimental capabilities and conditions, power handling, radial location, pumping capability, operating temperature, lithium filling, MHD forces, and diagnostics for control and characterization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical background for a fast flow liquid metal divertor experiment

Tokamak Energy has developed a liquid metal experiment featuring a lithium loop that circulates lithium through the HIDRA stellarator at the University of Illinois at Urbana-Champaign. The loop includes a replaceable divertor module, designed to demonstrate fast, steady, open-surface liquid metal flow. The first-generation divertor module was deliberately kept simple—an open-surface chute—to enable modelling validation and establish a benchmark for future design iterations. This paper presents the theoretical foundations of the experimental design. Specifically, we identify module overflooding as the primary challenge and determine the limits of fluid velocity and magnetic field strength necessary to prevent it. The steady-state flow patterns are expected to exhibit relatively slow surface velocities, which do not fully align with the fast-flow concept. Nevertheless, the experiment is designed to achieve controllable, continuous open-surface flow within an operational fusion device, representing a significant step toward the development of liquid metal divertor technology.

Experiment↗

Automated divertor target design by adjoint shape sensitivity analysis and a one-shot method

As magnetic confinement fusion progresses towards the development of first reactor-scale devices, computational tokamak divertor design is a topic of high priority. Presently, edge plasma codes are used in a forward approach, where magnetic field and divertor geometry are manually adjusted to meet design requirements. Due to the complex edge plasma flows and large number of design variables, this method is computationally very demanding. On the other hand, efficient optimization-based design strategies have been developed in computational aerodynamics and fluid mechanics. Such an optimization approach to divertor target shape design is elaborated in the present paper. A general formulation of the design problems is given, and conditions characterizing the optimal designs are formulated. Using a continuous adjoint framework, design sensitivities can be computed at a cost of only two edge plasma simulations, independent of the number of design variables. Furthermore, by using a one-shot method the entire optimization problem can be solved at an equivalent cost of only a few forward simulations. The methodology is applied to target shape design for uniform power load, in simplified edge plasma geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of divertor heat flux widths on heating power, flux expansion, and plasma current in the NSTX

Here, we report the dependence of the lower divertor surface heat flux profiles, measured from infrared thermography and mapped magnetically to the mid-plane on loss power into the scrape-off layer (P LOSS ), plasma current (I p ), and magnetic flux expansion (f exp ), as well as initial results with lithium wall conditioning in NSTX. Here we extend previous studies to higher triangularity ~0.7 and higher I p ≤ 1.2 MA. First we note that the mid-plane heat flux width mapped to the mid-plane, $λ^{mid}_q$, is largely independent of P LOSS for P LOSS ≥ 4 MW. $λ^{mid}_q$ is also found to be relatively independent of f exp ; peak heat flux is strongly reduced as f exp is increased, as expected. Finally, $λ^{mid}_q$ is shown to strongly contract with increasing I p such that $λ^{mid}_q$ ∝ I$^{-1.6}_p$ with a peak divertor heat flux of q div, peak ~ 15 MW/m 2 when I p = 1.2 MA and P LOSS ~ 6 MW. These relationships are then used to predict the divertor heat flux for the planned NSTX-Upgrade, with heating power between 10 and 15 MW, B t = 1.0 T and I p = 2.0 MA for 5 s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stability of divertor detachment

The 2D simulations of edge plasma transport show that unlike some earlier publications, the impurity radiation loss per se does not cause the bifurcation-like transition to detached divertor regime. However, for the case where anomalous plasma transport is increasing with advancement to detachment, like it was recently observed experimentally, the transition to detachment exhibit the bifurcation-like character. Some other plausible reasons for similar bifurcation-like evolution to detachment are discussed. It is demonstrated that the current convective instability can be triggered in detached inner divertor plasma for the condition when outer divertor is still attached. This can explain the fluctuations of radiation loss observed recently experimentally for similar conditions. The self-sustained oscillations observed recently in numerical simulations and related to the interplay of the thermal force effects in impurity transport and impurity radiation loss are further investigated. It is shown that for some conditions these oscillations are ubiquitous, since no stable solutions possible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tungsten erosion during L-mode discharges in the DIII-D SAS-VW divertor

A series of L-mode plasma discharges was performed in the DIII-D tokamak to assess the impact of outer strike point (OSP) position and toroidal magnetic field direction on erosion and core contamination potential of the recently-installed, tungsten-coated Small Angle Slot (SAS-VW) divertor. In one discharge, in-slot emission spectroscopy measured an<48 % increase in the W gross erosion rate when the OSP was moved 3 cm outwards, away from the V-shaped vertex of the slot divertor. However, the effective W yield (erosion rate divided by the incident D flux) was, overall, insensitive to changes in OSP location. Consistently low estimates of the effective W yield based on measurements taken a few cm outwards from the vertex suggest potentially significant C surface contamination. No W emission signal was detected when orienting the toroidal magnetic field such that the ion B×∇B drift direction is pointed away from the X-point. However, measurements of W content in the plasma core for both toroidal magnetic field directions suggest the presence of additional, unmeasured sources of erosion. The difference in the measured core W density with OSP position is much greater than the difference in the measured erosion rates, which may suggest that the leakage of eroded impurities out of the divertor is governed primarily through the parallel ion temperature gradient and friction forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New proposed ITER divertor design using carbon insert on tungsten to mitigate ELMs and secondary radiation effects on nearby components

Abstract Building a successful device for the magnetic fusion energy production is a great challenge. ITER is an international project of the tokamak based magnetic fusion design being developed for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. A key obstacle to a successful magnetic fusion energy production is however, the performance during abnormal events including plasma disruptions and edge-localized modes (ELMs). A credible reactor design must tolerate at least a few of these transient events without serious consequences such as melting of the structure. This paper investigates and compares the performance of the current ITER tokamak design during two types of transient events, i.e., ELMs occurring at normal operation and disruptions during abnormal operation. We simulated the divertor components response using our integrated 3D HEIGHTS package. The simulations include self-consistent modeling of the interaction of the released core plasma particles with the initial solid divertor material, energy deposition processes, vaporization of divertor material, secondary plasma formation and MHD evolution, incident core particles collisions and scattering from this dense secondary plasma, photon radiation of secondary plasma, and the resulting heat loads on nearby components. Our simulations showed that using a small carbon insert around the strike point can significantly reduce the overall expected damage on the tungsten dome structure, reflector plates, and prevent tungsten vaporization and its potential core plasma contamination.

47 OTHER INSTRUMENTATION↗

Divertor Neutron Flux Monitor: Conceptual Design and Calibration

The operating conditions of a neutron diagnostic systems which are responsible for measuring of the total neutron yield in the ITER tokamak reactor are analyzed. Based on results of neutronic calculations and analysis of suitable methods for measuring the neutron yield, a concept of a system for neutron flux measurement in the divertor is proposed. The design for the neutron flux monitor located in the divertor cassette of the tokamak is selected in view of the requirements specified for the neutron diagnostic system of the ITER and its operating conditions. Several fission chambers with different sensitivities and radiator materials will be used for measurements. System is capable of neutron fluxes measuring over the entire dynamic range of the ITER neutron yield with an error of {delta}<10% and a time resolution of 1 ms that are necessary for studying the physical phenomena of ignition and burning plasma. The problems of carrying out of the divertor neutron monitor efficiency calibration with the aim to measure the absolute value of the neutron yield in the ITER tokamak reactor are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical design study of an infrared visible viewing system for Wendelstein 7-X divertor observation and control

For the Wendelstein 7-X stellarator, which will allow quasicontinuous operation ({tau}{<=}30 min) with 10 MW of electron cyclotron radiation heating power, a conceptual design study for an IR/visible viewing system (IVVS) has been elaborated. Ten such systems, as part of the machine protection system, will be required for real time monitoring of all ten discrete, water cooled divertor modules with high spatial (<10 mm) resolution, in order to prevent local overheating of the target tiles, which could easily lead to their destruction. On the physics side, the systems will be used for divertor symmetry investigations by studying the power load distribution on all targets modules and by observing the island divertor plasmas in the light of H{alpha}, C II, and C III using the visible imaging section of the systems. The optics of the system can be divided into three parts: a mirror based optical head, creating an intermediate image, a Cassegrain telescope system, and individual lens based imaging optics adapted to the various detectors for IR (3-5 {mu}m and 8-14 {mu}m) and visible observations, with their optical light paths being separated by in-vacuum dichroic beam splitters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High heat flux Langmuir probe array for the DIII-D divertor plates

Two modular arrays of Langmuir probes designed to handle a heat flux of up to 25 MW/m{sup 2} for 10 s exposures have been installed in the lower divertor target plates of the DIII-D tokamak. The 20 pyrolytic graphite probe tips have more than three times higher thermal conductivity and 16 times larger mass than the original DIII-D isotropic graphite probes. The probe tips have a fixed 12.5 deg. surface angle to distribute the heat flux more uniformly than the previous 6 mm diameter domed collectors and a symmetric 'rooftop' design to allow operation with reversed toroidal magnetic field. A large spring-loaded contact area improves heat conduction from each probe tip through a ceramic insulator into a cooled graphite divertor floor tile. The probe tips, brazed to molybdenum foil to ensure good electrical contact, are mounted in a ceramic tray for electrical isolation and reliable cable connections. The new probes are located 1.5 cm radially apart in a staggered arrangement near the entrance to the lower divertor pumping baffle and are linearly spaced 3 cm apart on the shelf above the in-vessel cryopump. Typical target plate profiles of J{sub sat}, T{sub e}, and V{sub f} with 4 mm spatial resolution are shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The search for a flux-expansion divertor in TJ-II

The role of the divertor in a stellarator-based fusion reactor is discussed, making emphasis on the flux-expansion concept. In this context, the possibility of having a flux-expansion divertor in TJ-II is explored. As a first step, the three-dimensional map of the particle flux has been estimated using the code ISDEP in two different plasma regimes. This full-f Monte Carlo code computes the ion guiding-centre trajectories. The particle trajectories rather than the field lines must be considered due to the fact that the typical ion orbits are pretty wide in comparison with the typical plasma lengths. Moreover the plasma electric field and the collisionality must be considered. We have chosen a configuration that presents flux expansion at given toroidal positions. We have estimated the three-dimensional map of heat and particle fluxes and checked that it is possible to reduce them strongly by intersecting the trajectories at a given zone of the space. Future studies will include the development of ergodic zones to reduce the fluxes on the divertor plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An investigation of some effects of drifts and magnetic field direction in the scrape-off layer and divertor of tokamak plasmas

Various effects of particle drifts in the scrape-off layer (SOL) and divertor of tokamaks have been calculated. The predictions are consistent with several experimentally observed phenomena, e.g., the double reversal of parallel ion velocity in the SOL and the enhanced core penetration of argon injected into the divertor when the grad-B ion drift is into, rather than away from, the divertor. Other interesting phenomena, such as the structure of the parallel current flowing in the SOL and the reversal of the sign of the electrostatic potential in the SOL when the toroidal field direction is reversed, are also predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D

Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ({zeta}). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with {zeta}, in agreement with the modeling. Optimization of kink stability via {zeta} is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest {zeta} tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5<{beta}{sub N}<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H{sub 98(y,2)}{approx_equal}1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling and Simulation on SOL-Divertor Plasmas

SOL-divertor plasmas in magnetic fusion reactors are very complicated. For the divertor design and operation planning, numerical simulations are indispensable tools. Modeling for the comprehensive divertor code is introduced. To increase the basic understanding of edge plasma physics, particle simulations are also important. Physical and numerical models for a particle simulation code PARASOL are presented. Recent results from PARASOL simulations are demonstrated, e.g., SOL flow structure in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗