Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Certified”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Comparative Analysis of Airspace System Accessibility for Uncrewed Aircraft Systems for Regional Operations

As part of newly developing aviation markets, fixed-wing Uncrewed Aircraft Systems (UAS) are projected to impact airspace systems and conventional air traffic in the future. The initial introduction of fixed-wing cargo UAS for regional operations is anticipated to occur at smaller under-utilized airports. Therefore, this paper assesses the integration potential of regional fixed-wing cargo UAS into the airspace system. A baseline is established to identify potential airports for UAS operations in different areas. Additionally, using 2022 data, regional aircraft eligible for future cargo UAS operations are investigated. Finally, the accessibility of these regional aircraft at the identified airports was analyzed. Based on the availability of current certified landing systems needed for initial UAS operations, the potential airports for UAS operations are compared in the areas of Germany, Texas, and California. Despite 173 identified airports for potential UAS operations in Germany, 376 in Texas, and 227 in California, only eleven of these airports provide current certified landing systems needed for initial UAS operations. However, other landing system technologies that are currently under development, such as vision-based landing systems, might support UAS accessibility at the identified airports for potential UAS operations in the future.

Uncrewed aircraft systems↗

Flight Certification Approach for NASA's Space Launch System

NASA’s Space Launch System (SLS) vehicle was successfully launched on November 16, 2022, initiating the Artemis I mission to send the uncrewed Orion spacecraft to the Moon and further into space than any human-rated spacecraft had previously flown. Flight certification of the launch vehicle was part of the systems engineering and integration (SE&I) effort conducted by NASA to successfully certify the mission and begin a new era of human space exploration of the Moon and eventually Mars. This paper describes the SLS Program flight certification approach including the organization, processes, and reporting. This approach used traditional NASA SE&I milestone reviews and lessons learned from the Space Shuttle Program, as well as unique methods to certify the complex system, procedures, and personnel readiness. The approach utilized by the SLS Program to conduct flight certification for the Artemis I mission can be extended to address flight certification for other complex programs.

flight certification↗

Advancing Open Science in Atmospheric Research: Integrating Data Usability and Machine Learning

In the dynamic realm of atmospheric sciences, the convergence of data science methodologies and open data marks a transformative era, driving research advancements and nurturing aspiring scientists. This abstract highlights two pivotal projects that epitomize open science principles, aligning seamlessly with the session's objective of interdisciplinary synergy and the cultivation of emerging talent. As a NASA-certified data center, our foremost endeavor focuses on enhancing the visibility and traceability of NASA datasets within atmospheric science research. This initiative not only elevates these datasets' prominence but also establishes a robust framework ensuring their credibility in scholarly discourse. By bridging the gap between data sources and research publications, this project serves as an educational catalyst, nurturing a new generation of scholars in open collaboration and dataset authenticity. Concurrently, our second project pioneers an early warning system for flooding events, utilizing machine learning algorithms to predict flooded fractions. Through multi-source data fusion and predictive modeling, this initiative goes beyond forecasting; it embodies the core of open science by enabling proactive risk mitigation strategies. This project not only advances atmospheric sciences but also fosters an environment where young scholars engage in practical, data-driven solutions. These intertwined projects exemplify the fusion of data science with open data solutions, ensuring both the usability of quality datasets and the cultivation of scientific knowledge among emerging scholars. By spotlighting these impactful use cases, our aim is to foster discussions emphasizing the importance of open collaboration, data integrity, and the nurturing of scientific talent in atmospheric sciences." "In the dynamic realm of atmospheric sciences, the convergence of data science methodologies and open data marks a transformative era, driving research advancements and nurturing aspiring scientists. This abstract highlights two pivotal projects that epitomize open science principles, aligning seamlessly with the session's objective of interdisciplinary synergy and the cultivation of emerging talent. As a NASA-certified data center, our foremost endeavor focuses on enhancing the visibility and traceability of NASA datasets within atmospheric science research. This initiative not only elevates these datasets' prominence but also establishes a robust framework ensuring their credibility in scholarly discourse. By bridging the gap between data sources and research publications, this project serves as an educational catalyst, nurturing a new generation of scholars in open collaboration and dataset authenticity. Concurrently, our second project pioneers an early warning system for flooding events, utilizing machine learning algorithms to predict flooded fractions. Through multi-source data fusion and predictive modeling, this initiative goes beyond forecasting; it embodies the core of open science by enabling proactive risk mitigation strategies. This project not only advances atmospheric sciences but also fosters an environment where young scholars engage in practical, data-driven solutions. These intertwined projects exemplify the fusion of data science with open data solutions, ensuring both the usability of quality datasets and the cultivation of scientific knowledge among emerging scholars. By spotlighting these impactful use cases, our aim is to foster discussions emphasizing the importance of open collaboration, data integrity, and the nurturing of scientific talent in atmospheric sciences.

Jennifer Wei↗

SHIPMENT OF TWO DOE-STD-3013 CONTAINERS IN A 9977 TYPE B PACKAGE

The 9977 is a certified Type B Packaging authorized to ship uranium and plutonium in metal and oxide forms. Historically, the standard container for these materials has been the DOE-STD-3013 which was specifically designed for the long term storage of plutonium bearing materials. The Department of Energy has used the 9975 Packaging containing a single 3013 container for the transportation and storage of these materials. In order to reduce container, shipping, and storage costs, the 9977 Packaging is being certified for transportation and storage of two 3013 containers. The challenges and risks of this content and the 9977s ability to meet the Code of Federal Regulations for the transport of these materials are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Romania: Brand-New Engineering Solutions

The HEU spent nuclear fuel transport from Romania was a pilot project in the framework of the Russian Research Reactor Fuel Return Program (RRRFR), being the first fully certified spent nuclear fuel shipment by air. The successful implementation of the Romanian shipment also brought various new technology in the program, further used by other participating countries. Until 2009, the RRRFR program repatriated to the Russian Federation HEU spent nuclear fuel of Russian origin from many countries, like Uzbekistan, Czech Republic, Latvia, Hungary, Kazakhstan and Bulgaria. The means of transport used were various; from specialized TK-5 train for the carriage of Russian TUK-19 transport casks, to platform trains for 20 ft freight ISO containers carrying Czech Skoda VPVR/M casks; from river barge on the Danube, to vessel on the Mediterranean Sea and Atlantic Ocean. Initially, in 2005, the transport plan of the HEU spent nuclear fuel from the National Institute for R&D in Nuclear Physics and Nuclear Engineering 'Horia Hulubei' in Magurele, Romania considered a similar scheme, using the specialized TK-5 train transiting Ukraine to the destination point in the Russian Federation, or, as an alternative, using the means and route of the spent nuclear fuel periodically shipped from the Bulgarian nuclear power plant Kosloduy (by barge on the Danube, and by train through Ukraine to the Russian Federation). Due to impossibility to reach an agreement in due time with the transit country, in February 2007 the US, Russian and Romanian project partners decided to adopt the air shipment of the spent nuclear fuel as prime option, eliminating the need for agreements with any transit countries. By this time the spent nuclear fuel inspections were completed, proving the compliance of the burn-up parameters with the international requirements for air shipments of radioactive materials. The short air route avoiding overflying of any other countries except the country of origin and the country of destination also contributed to the decision making in this issue. The efficient project management and cooperation between the three countries (Russia, Romania and USA) made possible, after two and a half years of preparation work, for the first fully certified spent nuclear fuel air shipment to take place on 29th of June 2009, from Romanian airport 'Henri Coanda' to the Russian airport 'Koltsovo' near Yekaterinburg. One day before that, after a record period of 3 weeks of preparation, another HEU cargo was shipped by air from Romanian Institute for Nuclear Research in Pitesti to Russia, containing fresh pellets and therefore making Romania the third HEU-free country in the RRRFR program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

THERMAL UPGRADING OF 9977 RADIOACTIVE MATERIAL (RAM) TYPE B PACKAGE

The 9977 package is a radioactive material package that was originally certified to ship Heat Sources and RTG contents up to 19 watts and it is now being reviewed to significantly expand its contents in support of additional DOE missions. Thermal upgrading will be accomplished by employing stacked 3013 containers, a 3013 aluminum spacer and an external aluminum sleeve for enhanced heat transfer. The 7th Addendum to the original 9977 package Safety Basis Report describing these modifications is under review for the DOE certification. The analyses described in this paper show that this well-designed and conservatively analyzed package can be upgraded to carry contents with decay heat up to 38 watts with some simple design modifications. The Model 9977 package has been designed as a replacement for the Department of Transportation (DOT) Fissile Specification 6M package. The 9977 package is a very versatile Type B package which is certified to transport and store a wide spectrum of radioactive materials. The package was analyzed quite conservatively to increase its usefulness and store different payload configurations. Its versatility is evident from several daughter packages such as the 9978 and H1700, and several addendums where the payloads have been modified to suit the Shipper's needs without additional testing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of spectral summing to indeterminate suspect low-level drums at Los Alamos National Laboratory

An analytical technique developed by Pajarito Scientific Corporation (PSC), utilizing spectral summing of spectra from groups of drums of similar waste type, is being employed by the Waste Disposition Project - Low Level Waste Disposal (WDP-LLWD) Group at Los Alamos National Laboratory (LANL). This technique has been used to disposition low-level radioactive waste that has dropped out of the transuranic (TRU) category and has no place to go unless it can be proven to be LLW and not TRU. The TRU program at LANL run by Mobile Characterization Services (MCS) employs two High Efficiency Neutron Counters (HENC) with built-in gamma assay systems to assay radioactive waste for shipment and disposal as TRU waste at the Waste Isolation Pilot Plant (WIPP) at Carlsbad, New Mexico. As well as being certified for WIPP assays, the HENC systems can also be used for low-level waste assays for disposal at LANL or off-site disposal facilities, such as the Nevada Test Site (NTS). Some of the waste processed through the HENC systems cannot be confinned TRU due to the absence of detected TRU alpha emitters above the TRU cutoff of 100 nCi/g. This waste becomes suspect low-level waste (SLLW). In many cases, the waste also can't be classified as LLW because the minimum detectable activity (MDA) of TRU radio nuclides is above the 100 nCi/g level. These wastes that do not have enough detectable TRU activity to be classified as TRU waste and have too high a MDA to be classified as LLW enter a radioactive waste characterization indetenninate status that prevents their dispositioning as either TRU waste or LLW. Spectral summing allows an experienced ganuna spectroscopy analyst to add the HENC gamma spectra of a number of similar waste items together to form a consolidated (summed) spectrum. This summed spectrum contains the assay results of the group of items rather than the individual item, and gamma peaks that were not discernable in the individual spectra can become quantifiable in the summed spectrum and the MDA for group sum is reduced. The group of waste items can then be properly classified as LLW based on the summed spectrum and valid assay values can be assigned for disposal. This technique has been successfully applied to a set of 52 debris drums - with individual MDA > 100 nCi/g - with a resulting group total TRU alpha activity concentration below 40nCi/g. Further application of the technique at LANL to other waste drums that are measured on a WIPP certified HENC system is planned and good candidate drum sets are being evaluated as indeterminate situations develop.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

BALLISTICS TESTING OF THE 9977 SHIPPING PACKAGE FOR STORAGE APPLICATIONS

Radioactive materials are stored in a variety of locations throughout the DOE complex. At the Savannah River Site (SRS), materials are stored within dedicated facilities. Each of those facilities has a documented safety analysis (DSA) that describes accidents that the facility and the materials within it may encounter. Facilities at the SRS are planning on utilizing the certified Model 9977 Shipping Package as a long term storage package and one of these facilities required ballistics testing. Specifically, in order to meet the facility DSA, the radioactive materials (RAM) must be contained within the storage package after impact by a .223 caliber round. In order to qualify the Model 9977 Shipping Package for storage in this location, the package had to be tested under these conditions. Over the past two years, the Model 9977 Shipping Package has been subjected to a series of ballistics tests. The purpose of the testing was to determine if the 9977 would be suitable for use as a storage package at a Savannah River Site facility. The facility requirements are that the package must not release any of its contents following the impact in its most vulnerable location by a .223 caliber round. A package, assembled to meet all of the design requirements for a certified 9977 shipping configuration and using simulated contents, was tested at the Savannah River Site in March of 2011. The testing was completed and the package was examined. The results of the testing and examination are presented in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of spectral summing to indeterminate suspect low-level drums at Los Alamos National Laboratory

The spectral summing technique developed by Pajarito Scientific Corporation (PSC) is a unique modeling technique that is being employed by the Waste Disposition Project - Low Level Waste Disposition (WDP-LLWD) Group at Los Alamos National Laboratory (LANL). This technique has been used to disposition low-level radioactive waste that has dropped out of the transuranic (TRU) category and has no disposal path unless it can be proven to be LLW and not TRU. The TRU program at LANL run by Mobile Characterization Services (MCS) employs High Efficiency Neutron Counters (HENC) with built-in gamma assay systems to assay radioactive waste for shipment and disposal as TRU waste at the Waste Isolation Pilot Plant (WIPP) at Carlsbad, New Mexico. As well as being certified for WIPP assays, the HENC systems can also be used for low-level waste assays for disposal at LANL or off-site disposal facilities, such as the Nevada Test Site (NTS). Some of the waste processed through the HENC systems cannot be confirmed TRU due to the absence of detected TRU alpha emitters above the TRU cutoff of 100 nCi/g. This waste becomes suspect low-level waste (SLLW). In many cases, the waste also can't be classified as LLW because the minimum detectable activity (MDA) of TRU radionuclides is above the 100 nCi/g level. These wastes that do not have enough detectable TRU activity to be classified as TRU waste and have TRU MDAs > 100nCi/g enter a radioactive waste characterization indeterminate state that prevents their dispositioning as either TRU waste or LLW. Spectral summing allows an experienced gamma spectroscopy analyst to add the HENC gamma spectra of a number of similar waste items together to form a consolidated (summed) spectrum. This summed spectrum contains the assay results of the group of items rather than the individual item, and gamma peaks that were not discemable in the individual spectra become quantifiable in the summed spectrum and the MDA for the group sum is reduced. The group of waste items can then be properly classified as LLW waste on the summed spectrum and valid assay values can be assigned for disposal. This technique has been successfully applied to a set of 52 debris drums - with individual MDA > 100nCi/g - with a resulting group total TRU alpha activity concentration below 40nCi/g. Further application of the technique at LANL to other debris drums and sludge drums that were measured on a WIPP certified HENe is planned and good candidate drum sets are being evaluated.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

LEVERAGING AGING MATERIALS DATA TO SUPPORT EXTENSION OF TRANSPORTATION SHIPPING PACKAGES SERVICE LIFE

Nuclear material inventories are increasingly being transferred to interim storage locations where they may reside for extended periods of time. Use of a shipping package to store nuclear materials after the transfer has become more common for a variety of reasons. Shipping packages are robust and have a qualified pedigree for performance in normal operation and accident conditions but are only certified over an approved transportation window. The continued use of shipping packages to contain nuclear material during interim storage will result in reduced overall costs and reduced exposure to workers. However, the shipping package materials of construction must maintain integrity as specified by the safety basis of the storage facility throughout the storage period, which is typically well beyond the certified transportation window. In many ways, the certification processes required for interim storage of nuclear materials in shipping packages is similar to life extension programs required for dry cask storage systems for commercial nuclear fuels. The storage of spent nuclear fuel in dry cask storage systems is federally-regulated, and over 1500 individual dry casks have been in successful service up to 20 years in the US. The uncertainty in final disposition will likely require extended storage of this fuel well beyond initial license periods and perhaps multiple re-licenses may be needed. Thus, both the shipping packages and the dry cask storage systems require materials integrity assessments and assurance of continued satisfactory materials performance over times not considered in the original evaluation processes. Test programs for the shipping packages have been established to obtain aging data on materials of construction to demonstrate continued system integrity. The collective data may be coupled with similar data for the dry cask storage systems and used to support extending the service life of shipping packages in both transportation and storage.

36 MATERIALS SCIENCE↗

Obfuscated authentication systems, devices, and methods

Embodiments of the present invention are directed toward authentication systems, devices, and methods. Obfuscated executable instructions may encode an authentication procedure and protect an authentication key. The obfuscated executable instructions may require communication with a remote certifying authority for operation. In this manner, security may be controlled by the certifying authority without regard to the security of the electronic device running the obfuscated executable instructions.

97 MATHEMATICS AND COMPUTING↗

Assessing the Costs and Benefits of the Superior Energy Performance Program

Industrial companies are seeking to manage energy consumption and costs, mitigate risks associated with energy, and introduce transparency into reports of their energy performance achievements. Forty industrial facilities are participating in the U.S. DOE supported Superior Energy Performance (SEP) program in which facilities implement an energy management system based on the ISO 50001 standard, and pursue third-party verification of their energy performance improvements. SEP certification provides industrial facilities recognition for implementing a consistent, rigorous, internationally recognized business process for continually improving energy performance and achievement of established energy performance improvement targets. This paper focuses on the business value of SEP and ISO 50001, providing an assessment of the costs and benefits associated with SEP implementation at nine SEP-certified facilities across a variety of industrial sectors. These cost-benefit analyses are part of the U.S. DOE?s contribution to the Global Superior Energy Performance (GSEP) partnership, a multi-country effort to demonstrate, using facility data, that energy management system implementation enables companies to improve their energy performance with a greater return on investment than business-as-usual (BAU) activity. To examine the business value of SEP certification, interviews were conducted with SEP-certified facilities. The costs of implementing the SEP program, including internal facility staff time, are described and a marginal payback of SEP certification has been determined. Additionally, more qualitative factors with regard to the business value and challenges related to SEP and ISO 50001 implementation are summarized.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A comparative study of 129I content in environmental standard materials IAEA-375, NIST SRM 4354 and NIST SRM 4357 by Thermal Ionization Mass Spectrometry and Accelerator Mass Spectrometry

Iodine environmental measurements have consistently been backed up in the literature by standard materials like IAEA-375, Chernobyl Soil. There are not many other sources of a certified reference material for 129I content for mass spectrometry measurements. Some that have been found in the literature include NIST-4354 and NIST-4357. They are still available at the time of this writing. They don’t have certified content or isotopic values. There has been some work in the literature to show that iodine is present, but there hasn’t been enough to establish a consensus value. These materials have been analyzed at INL through two separate mass spectrometry techniques. They involve a combustion method of the starting material in oxygen, followed by TIMS analysis and a leaching preparation analyzed by accelerator mass spectrometry. Combustion/TIMS preparation of NIST SRM-4354 resulted in a 129I/127I ratio of 1.92 x 10-6 which agrees with AMS measurements which measured the 129I/127I ratio to be 1.93 x 10-6.

129I/127I ratio↗

Distributed Wind Competitiveness Improvement Project

The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. Manufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. This fact sheet describes the CIP and funding awarded as part of the project.ufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. This fact sheet describes the CIP and funding awarded as part of the project.

17 WIND ENERGY↗

Deployment of feasible routes to renewable jet-fuel with an emphasis on the Norwegian landscape.

Techno-economic performances of Norwegian biojet fuel production via the Alcoholto- Jet and Fischer-Tropsch synthetic paraffinic kerosene routes were estimated based on adaptations of available literature data to Norwegian conditions. This paper reviews the deployment of feasible routes to sustainable jet fuel production for the short-to-medium term timeframe (2020-2025), with an emphasis on the Norwegian landscape. Given the fact that there are serious concerns regarding the availability and the sustainability of large-scale biofuels production both from oil seed plants and carbohydrates (sugars and starches) as well as the unsuitability of the Norwegian climate for oil seed or sugar/starch plant cultivation, only biojet fuels produced from lignocellulosic resources are considered. The short-to-medium term implies certified or near certified fuels. The most promising and feasible alternatives for Norwegian biojet fuel production are hence limited to FT-SPK and ATJ. The results suggest that, from a techno-economic point of view, production of jet fuel via the gasification-FT route is more favorable than the alcohol to jet fuel route. This is attributed to the inclusion of the alcohol production step. Feedstock price is the main operating cost for both of the routes. The current cost of production of jet fuel under Norwegian conditions for gasification FT route is estimated between 43 USD/GJ and 47.4 USD/GJ, and for the ATJ route, between 54 USD/GJ and 60 USD/GJ.

09 BIOMASS FUELS↗

NUREG/CR-7239, “Review of Fissile Material Exemptions and General Licenses in 10 CFR Part 71,” and Proposed Revisions to Harmonize with IAEA SSR-6 Fissile Material Requirements

Title 10 of the United States (US) Code of Federal Regulations (CFR), Part 71, Packaging and Transportation of Radioactive Material, includes requirements for the transport of fissile material in packages. These regulations provide requirements for packaging that is certified by the US Nuclear Regulatory Commission (NRC) to transport fissile material. The regulations also include provisions that allow for shipment in packages that are not required to be certified by the NRC. These provisions include criteria for exemptions from classification as fissile material (§71.15) and permit general licenses for limited quantities of fissile material and plutonium-beryllium special form sources (§71.22 and §71.23, respectively). This paper will discuss recommendations that NRC has made on the use of the fissile material exemptions and general license provisions in a recently published NUREG/CR, and changes to these provisions proposed for an upcoming rulemaking action.NUREG/CR-7239, “Review of Fissile Material Exemptions and General Licenses in 10 CFR Part 71,” was recently developed by Oak Ridge National Laboratory (ORNL) for the NRC. This document provides technical recommendations to fissile material licensees on how to apply the fissile material exemption and general license regulations. This paper will outline this NUREG/CR, including: 1) the technical basis, intent, and anticipated usage of each of the fissile material exemption and general license provisions; 2) the recent regulatory history of the Part 71 fissile material exemptions and general licenses; and 3) example problems which illustrate how the provisions might be applied and justified.In 2012, IAEA made several significant changes to the fissile material requirements in SSR-6, including the fissile exception provisions and provisions similar to the U.S. fissile material general licenses. In 2016, the NRC began a rulemaking effort to consider these changes (among others), and to decide how to best harmonize the domestic U.S. regulations. This paper will review the 2012 changes made to SSR-6, discuss the NRC staff consideration of those changes, and detail the proposed revisions to 10 CFR Part 71 that NRC is considering for the fissile material exemptions and general licenses.

Barto, Andrew↗

32.9% Efficient Tandem Solar Cell with Strain-Balanced GaInAs/GaAsP Quantum Wells: Preprint

We demonstrate single and dual junction solar cells with up to 80 strain-balanced GaInAs/GaAsP quantum wells (QWs), in order to extend the range of photon absorption. The net average stress in the quantum well layers is =12 MPa, despite coherent stresses in the individual layers that are 35-70 times greater. The GaAs-QW cell has a certified efficiency of (27.2 ± 0.2)% at one-sun; the GaInP/GaAs-QW tandem has a certified record one-sun efficiency of (32.9 ± 0.5)%. We will discuss the architecture of the devices, the physics behind the high performance, and pathways to further improvement.

GaAsP↗

Update on the High Precision Titration Method for Uranium Assay Supported by NBL Program Office

The NBL Program Office (NBL PO) has coordinated with Oak Ridge National Laboratory (ORNL) to implement the High Precision Titration (HPT) method for uranium assay measurements. The measurement method has been successfully developed and qualified, therefore ORNL has progressed to performing analyzes critical to the mission of the NBL PO. The HPT method is vital to producing the next generation of certified reference materials for uranium assay and isotopic abundance. The work described here focused on establishing traceability of the method to the NIST SRM 136 potassium dichromate series, and focused on investigating small differences between SRM 136e and 136f. The NBL PO evaluated the history of all of its primary uranium reference materials, including CRM 112A natural uranium metal, and worked with NIST in investigating the small differences in the dichromate SRM’s. ORNL performed comparative experiments on SRM 136e and 136f using CRM 112A. The results of the experiment will be presented here, along with NBL PO’s plans to re-evaluate the CRM 112A certified uncertainty to comply with JCGM 100, “Guide to the expression of uncertainty in measurement.”

Rogers, Kayron↗