Physical vapor deposition process for engineering Pt based oxygen reduction reaction catalysts on NbOx templated carbon support
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Engineering Papers
Results for “Catalyst supports”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Supported Organoiridium-Pincer Catalysts for the Nonoxidative Dehydrogenation of High-Density Polyethylene
The iridium-pincer complex {p-OP( t Bu) 2 -C 6 H 2 -2,6-OP( t Bu) 2 ] 2 }Ir(C 2 H 4 ) ( P [Ir]) has been reported as a stable and active catalyst toward alkane dehydrogenation in homogeneous and supported heterogeneous systems. Dehydrogenation has been shown as a practical method toward functional polyolefins, with dehydrogenated high-density polyethylene (deHDPE) demonstrated as a valuable synthon for upcycling, as orthogonal C-H strategies are key to end-of-life upcycling. The heterogenization of P [Ir] on oxides (SiO 2 , Al 2 O 3 , and TiO 2 ; P [Ir]/E y O x ) yields a mixture of organometallic Ir-fragments whose catalytic nonoxidative dehydrogenation activity is modulated by the binding modes of the active metal on the surface. The binding mode was elucidated by a combination of solid-state NMR and XAFS analyses and supported by DFT calculations. Surface binding through the ligand enables active organoiridium that catalyzes internal olefination of deHDPE up to 1.23 mol % at 200 °C under dynamic vacuum. Alternatively, when the organoiridium is bonded though the metal center (Ir-O SiO ), catalyst activity is negligible. Furthermore, the catalytic activity of P [Ir]/SiO 2 showed comparable reactivity with the homogeneous analogue under the same catalytic conditions, and the heterogenized catalyst can be reused up to three cycles. In conclusion, this work highlights the importance of understanding how organometallic precursors react with hydroxylated metal oxide surfaces to establish structure-property relationships.
Hunt, Samuel B. [Argonne National Laboratory (ANL)↗
Spectroscopic determination of metal redox and segregation effects during CO and CO/NO oxidation over silica-supported Pd and PdCu catalysts
Here, we report the effects of alloying Cu into silica supported Pd nanoparticles on the catalytic activity, surface composition, and particle structure during CO oxidation Pd is highly active for CO oxidation but is inhibited by relevant competitive reagents (e.g. NO) at low temperatures (< 150 °C). By alloying Cu into Pd nanoparticles, NO inhibition is suppressed without any CO oxidation activity loss. Infrared spectroscopy illustrates the formation of surface nitrosyl (NO-Pd) is eliminated in the PdCu alloy catalyst, preventing CO oxidation inhibition by NO. X-ray absorption spectroscopy studies show that Pd in the monometallic catalyst forms a surface oxide after light-off. Conversely, in the PdCu catalyst, Pd remains metallic during reaction, independent of temperature, whereas the Cu oxidizes when the catalyst becomes active, after light-off. Furthermore, DRIFTS studies show that the Cu segregates to the surface as the catalyst becomes active for diesel oxidation, presumably becoming the O 2 adsorption site.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions
This work highlights the design and synthesis of bifunctional mesoporous silicate – polymer composite dual acid–base supported cascade catalysts. Compartmentalization of the two incompatible active sites is sought by segregating acid sites on the silica surface, and base sites within polymer chains and/or polymer domains. The ability to isolate and segregate active sites via control of the mesoporous silica pore size and polymer molecular weight is probed with silica samples functionalized by a grafting-to process. Supplemental activator and reducing agent (SARA) atom transfer radical polymerization is used to synthesize random copolymers containing protected primary amines. Thiol–ene ‘click’ chemistry facilitates silica functionalization via a convergent approach, with the ene-functionalized polymer end group and silica-grafted thiols forming SBA/MCM-SH-poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione). Polymer deprotection and thiol oxidation produces primary amine/sulfonic acid containing composite catalysts. With the polymer supported Lewis base and silica grafted Brønsted acid, the two-step deacetalization – Knoevenagel condensation cascade is explored to assess the ability of these polymer/silica hybrids to segregate active sites, allowing both acid and base site accessibility. Six composite catalysts are synthesized and tested in individual and cascade reactions with kinetic results demonstrating that lower molecular weight SBA-15-P1 and MCM-41-P1 catalysts outperform (higher turnover frequencies and initial rates) their higher molecular weight analogues, as well as a polymer-free system containing molecular active sites dispersed on the silica surface. Higher molecular weight composite catalysts perform more poorly due to limited chain solubility, mass transfer limitations, and poor catalyst accessibility. In many cases, the polymer chains effectively thread into the mesopores, with higher molecular weight polymers leading to pore blockage and inhibited mass transfer.
36 MATERIALS SCIENCE↗
Controlling Heterogeneous Catalysis with Organic Monolayers on Metal Oxides
A key theme of heterogeneous catalysis research is achieving control of the environment surrounding the active site to precisely steer the reactivity toward desired reaction products. One method toward this goal has been the use of organic ligands or self-assembled monolayers (SAMs) on metal nanoparticles. Metal-bound SAMs are typically employed to improve catalyst selectivity but often decrease the reaction rate as a result of site blocking from the ligands. Recently, the use of metal oxide-bound organic modifiers such as organophosphonic acid (PA) SAMs has shown promise as an additional method for tuning reactions on metal oxide surfaces as well as modifying oxide-supported metal catalysts. In this Account, we summarize recent approaches to enhance catalyst performance with oxide-bound monolayers. These approaches include (1) modification of metal oxide catalysts to tune surface reactions, (2) formation of SAMs on the oxide component of supported metal catalysts to modify sites at the metal–support interface, and (3) enhancement of catalyst performance (e.g., stability) through modification of sites remote from the active sites. Further, both the headgroups and organic tail groups of PA SAMs or other ligands can influence reactions on metal oxide surfaces. Binding of the headgroup can selectively poison certain active sites, altering the selectivity in a manner analogous to metal-bound ligands (at the expense of active site quantity). Moreover, tail groups can be functionalized to interact favorably with reactants and intermediates, for instance through dipole–dipole interactions. On supported metal catalysts like Pt/Al 2 O 3 , PA SAMs can selectively form on the oxide support. This selective deposition allows for modification of the metal–support interface with minimal blockage of metal sites. PA headgroups were shown to provide tunable acid sites at the interface, dramatically improving hydrodeoxygenation rates of various alcohols. Additionally, organic tail functionality was used to activate or stabilize specific reactants at the interface, such as with the use of amine-functionalized PAs to stabilize chemisorption of CO 2 during the reverse water gas shift reaction. PAs have also been found to affect the electronic properties of bulk metal sites through long-range electron withdrawal via the oxide, providing an additional avenue to tune catalytic behavior. Finally, organic modifiers were shown to enhance catalytic performance without directly modifying the active site. For instance, in biphasic liquid environments the modification of catalyst particles with hydrophobic or hydrophilic SAMs shifts the selectivity of multipath reactions on the basis of the hydrophobicities of different intermediates and products. As another “long-range” effect, the deposition of ligands on oxide supports improved catalyst stability through both improved resistance to sintering and suppression of active site poisoning. The recent contributions discussed in this Account demonstrate the versatility and significant potential for the approach of modifying catalysts with oxide-bound organic monolayers.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Transformation of atomically dispersed platinum in SAPO-37 into platinum clusters: catalyst for ethylene hydrogenation
Atomically dispersed supported platinum catalysts were synthesized by the reaction of Pt(acac) 2 (acac = acetylacetonato) with the silicoaluminophosphate molecular sieve SAPO-37, with infrared spectra showing that the reaction involved SAPO OH groups. Extended X-ray absorption fine structure (EXAFS) spectra show that, after heating in air to 623 K, each platinum atom on average was bonded to approximately two oxygen atoms of the SAPO support, with no evidence of platinum clusters. X-ray absorption near edge spectra (XANES) indicate a platinum formal oxidation state of approximately +2. Here, these supported mononuclear species lacked catalytic activity for ethylene hydrogenation at 1 bar and room temperature, but activity arose during catalysis in a once-through flow reactor/X-ray absorption spectroscopy cell, as the XANES white line intensity decreased, indicating reduction of the platinum, and the EXAFS-determined Pt–Pt coordination number (CN) increased from essentially zero to 2.7 ± 0.5 after 2 h, indicating the formation of platinum clusters of only a few atoms each. The data indicate the almost instantaneous formation of the clusters and identify them as the catalytically active species. Subsequent exposure of the catalyst to ethylene as in situ EXAFS and XANES data were recorded led to a decrease in the Pt–Pt coordination number to 1.6 ± 0.3 and an increase in the white line intensity, indicating partial oxidative fragmentation of the clusters by ethylene. Platinum clusters in SAPO-37 formed in separate experiments by exposure to H 2 prior to catalysis were also catalytically active for ethylene hydrogenation. Here, the data thus show how to dial in the catalytic activity by forming platinum clusters by exposure of mononuclear platinum to H 2 and how to dial back the activity by oxidative fragmentation of the clusters by reaction with ethylene, all under mild conditions; the ethylene : H 2 ratio of the reactant gas determines the average platinum nuclearity and thus the catalytic activity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structure-Activity Relationships of Hydrothermally Aged Titania-Supported Vanadium-Tungsten Oxide Catalysts for SCR of NOx Emissions with NH3
Supported V2O5-WO3/TiO2 materials employed as selective catalytic reduction (SCR) catalysts for NOx emission control from power plants. Fresh SCR catalysts usually receive exposure to harsh treatments in industry to accelerate catalyst activation (calcination in air at 650oC) and catalyst aging (hydrothermal aging at 650oC) in a way that represents various points in the catalyst/product lifetime. The present study investigates the catalyst structural and chemical changes occurring during such harsh treatments. Three series of supported V2O5-WO3/TiO2 catalysts were prepared by incipient-wetness impregnation of aqueous ammonium metavanadate and metatungstate precursors. The catalysts were subsequently dried and calcined at 550oC in O2, 650oC in O2, and hydrothermal conditions (10% O2, 8% H2O, 7% CO2 and 75% N2) at 650oC. The resulting catalysts were physically characterized by numerous techniques (in situ Raman, in situ IR, in situ High Field-High Spinning solid-state 51V MAS NMR, in situ EPR, XRD, BET surface area and ICP) and chemically probed with adsorbed ammonia, SCR-TPSR, and the SCR reaction. The surface WOx sites on the TiO2 support behave as a textural promoter that stabilizes the TiO2 (anatase) phase from sintering and transforming to the undesirable crystalline TiO2 (rutile) phase that can lead to formation of a Ti1-xVxO2 (rutile) solid solution with reduced V4+ cations (~7-15%). The surface VOx sites are mostly oligomerized as surface V+5Ox sites (~50-85% oligomers) and the extent of oligomerization tends to increase with surface WOx coverage and calcination temperature. A major difference between the calcined and hydrothermally treated catalysts was the low concentration of surface NH3* species on Lewis acid sites for the hydrothermally treated catalysts, yet the SCR activity was almost comparable for both catalysts. This finding suggests that surface NH4+*, primarily associated with the surface VOx sites, are able to efficiently perform the SCR reaction. Given that multiple catalyst parameters were simultaneously varying during these treatments, it was difficult to correlate the SCR activity with any single catalyst parameter. A correlation, however, was found between the SCR TOF/activity and the sum of the surface NH3* and NH4+* species, which is dominated by the surface NH4+* species.
SCR, NO, NH3, catalyst, V2O5, WO3, TiO2, promotion↗
Rapid Polyolefin Hydrogenolysis by a Single‐Site Organo‐Tantalum Catalyst on a Super‐Acidic Support: Structure and Mechanism
Abstract The novel electrophilic organo‐tantalum catalyst AlS/TaNp x ( 1 ) (Np=neopentyl) is prepared by chemisorption of the alkylidene Np 3 Ta=CH t Bu onto highly Brønsted acidic sulfated alumina (AlS). The proposed catalyst structure is supported by EXAFS, XANES, ICP, DRIFTS, elemental analysis, and SSNMR measurements and is in good agreement with DFT analysis. Catalyst 1 is highly effective for the hydrogenolysis of diverse linear and branched hydrocarbons, ranging from C2 to polyolefins. To the best of our knowledge, 1 exhibits one of the highest polyolefin hydrogenolysis activities (9,800 (CH 2 units) ⋅ mol(Ta) −1 ⋅ h −1 at 200 °C/17 atm H 2 ) reported to date in the peer‐reviewed literature. Unlike the AlS/ZrNp 2 analog, the Ta catalyst is more thermally stable and offers multiple potential C−C bond activation pathways. For hydrogenolysis, AlS/TaNp x is effective for a wide variety of pre‐ and post‐consumer polyolefin plastics and is not significantly deactivated by standard polyolefin additives at typical industrial concentrations.
Lai, Qingheng↗
Rapid Polyolefin Hydrogenolysis by a Single‐Site Organo‐Tantalum Catalyst on a Super‐Acidic Support: Structure and Mechanism
The novel electrophilic organo-tantalum catalyst AlS/TaNp x (1) (Np=neopentyl) is prepared by chemisorption of the alkylidene Np 3 Ta=CH t Bu onto highly Brønsted acidic sulfated alumina (AlS). Here, the proposed catalyst structure is supported by EXAFS, XANES, ICP, DRIFTS, elemental analysis, and SSNMR measurements and is in good agreement with DFT analysis. Catalyst 1 is highly effective for the hydrogenolysis of diverse linear and branched hydrocarbons, ranging from C2 to polyolefins. To the best of our knowledge, 1 exhibits one of the highest polyolefin hydrogenolysis activities (9,800 (CH 2 units) ⋅ mol(Ta) −1 ⋅ h −1 at 200 °C/17 atm H 2 ) reported to date in the peer-reviewed literature. Unlike the AlS/ZrNp 2 analog, the Ta catalyst is more thermally stable and offers multiple potential C−C bond activation pathways. For hydrogenolysis, AlS/TaNp x is effective for a wide variety of pre- and post-consumer polyolefin plastics and is not significantly deactivated by standard polyolefin additives at typical industrial concentrations.
03 NATURAL GAS↗
Vapor Deposition Process for Engineering of Dispersed PEMFC ORR Pt/NbO x /C Catalysts
With support from the Department of Energy, and in partnership with Oak Ridge National Laboratory, Exothermics, Northeastern University, the University of Michigan, and IRD Fuel Cells, Ford has led an effort to use physical vapor deposition (PVD) to produce oxygen reduction reaction (ORR) catalysts for proton exchange membrane fuel cells (PEMFCs). Conventional ORR catalysts are made by wet chemical processes, and experience loss of electrochemical surface area and activity over voltage cycling due to Pt dissolution and Pt particle coalescence. Not only was PVD processing researched as a means to reduce solvent waste and enhance reproducibility in catalyst manufacturing, but it was also perceived as a means to deposit preferential phases of niobium oxide onto the catalyst, which would then serve to prevent Pt particle movement and extend PEMFC lifetime.
08 HYDROGEN↗
Understanding Support Effects of ZnO-Promoted Co Catalysts for Syngas Conversion to Alcohols Using Atomic Layer Deposition
Co 2 C, an emerging catalyst for the conversion of syngas to oxygenates, shows support-sensitive behavior that has not yet been fully explained. In this work, we characterize Co catalysts modified with ZnO atomic layer deposition on SiO 2 , carbon, CeO 2 , and Al 2 O 3 supports. We find that under syngas conditions, ZnO-promoted Co transforms into Co 2 C on SiO 2 , carbon, and CeO 2 , but not on Al 2 O 3 . Moreover, the support affects the extent of carburization: while the SiO 2 -supported catalyst carburizes completely, carbon- and CeO 2 -supported catalysts show incomplete conversion of Co to Co 2 C. These three catalysts also exhibit different oxygenate selectivities. In contrast, the modified Al 2 O 3 -supported catalyst retains the Fischer-Tropsch catalytic properties of metallic Co. By depositing increasing amounts of Al 2 O 3 by ALD on the SiO 2 support, decreasing Co 2 C formation and oxygenate selectivity occurs. In-situ XANES reveals that Al 2 O 3 prevents Co 2 C formation by enabling the ZnO to restructure into ZnAl 2 O 4 during reduction. Thus, in addition to modifying the active catalyst phase, the promoter can also strongly interact with the support, significantly impacting catalyst performance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High-throughput dataset of impurity adsorption on common catalysts in biomass upgrading applications
Abstract An extensive dataset consisting of adsorption energies of pernicious impurities present in biomass upgrading processes on common catalysts and support materials has been generated. This work aims to inform catalyst and process development for the conversion of biomass-derived feedstocks to fuels and chemicals. A high-throughput workflow was developed to execute density functional theory calculations for a diverse set of atomic (Al, B, Ca, Cl, Fe, K, Mg, Mn, N, Na, P, S, Si, Zn) and molecular (COS, H 2 S, HCl, HCN, K 2 O, KCl, NH 3 ) species on 35 unique surfaces for transition-metal (Ag, Au, Co, Cu, Fe, Ir, Ni, Pd, Pt, Re, Rh, Ru) and metal-oxide (Al 2 O 3 , MgO, anatase-TiO 2 , rutile-TiO 2 , ZnO, ZrO 2 ) catalysts and supports. Approximately 3,000 unique adsorption geometries and corresponding adsorption energies were obtained.
09 BIOMASS FUELS↗
Metal–Organic Framework Nodes as a Supporting Platform for Tailoring the Activity of Metal Catalysts
Catalysis is a ubiquitous element of the modern economy, representing a cornerstone of many sectors including energy, materials, and pharmaceuticals. Within this realm, 80% of reactions are carried out by heterogeneous catalysts due to their advantageous physical and chemical characteristics. In some heterogeneous systems, the reaction rate can be optimized through rational catalyst design, in which support materials can be tailored structurally and stereoelectronically for targeted purposes to better facilitate the catalytic reaction. To this end, metal-organic frameworks (MOFs) have garnered recent attention due to their high porosity, crystallinity, and chemical tunability, which can be used to derive structure-activity relationships in the design of catalysts. In this Perspective, we survey examples of catalytically active guest metals on the inorganic nodes of MOFs. This is done with the intention of providing design guidelines for tailoring chemical reactivity and insights into the opportunities for future growth in this field. Strategies for rational design in MOF catalysis include electronic tuning of the metal node in the MOF support, installing promoter ions onto the node to effect the reactivity of grafted metals, modulation of the spatial environment around the transition metal using the metal node structure, and achieving site uniformity in supported catalysts. By highlighting these efforts, we seek to underscore the role of MOF nodes as nonspectator supports for catalytic metal complexes and provide future directions for rational catalyst design by tuning reactivity on these anchoring platforms.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Observations of Ethylene-for-CO Ligand Exchanges on a Zeolite-Supported Single-Site Rh Catalyst by X-ray Absorption Spectroscopy
Quick-scanning X-ray absorption fine structure (QXAFS) measurements were used to characterize the exchanges of ethylene and CO ligands in a zeolite HY-supported single-site Rh complex at a sampling rate of 1.0 Hz. The two ligands were reversibly exchanged on the rhodium, with quantitative results determined for the C 2 H 4 -for-CO exchange that are consistent with a first-order process. The apparent rate constant for the exchange decreased with increasing temperature. Fourier-transform infrared spectra characterizing the C 2 H 4 sorbed in the zeolite showed that the amount decreased with increasing temperature, consistent with the decrease in the exchange rate with increasing temperature. Here the results, illustrating the dynamics of ligand exchanges on a single-site supported metal catalyst, demonstrate the broad emerging applicability of the QXAFS technique for characterizing the dynamics of reactive intermediates on catalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Atomically dispersed zeolite-supported rhodium complex: Selective and stable catalyst for acetylene semi-hydrogenation
In this study, supported rhodium catalysts are known to be unselective for semi-hydrogenation reactions. Here, by tuning the electronic structure of supported mononuclear rhodium sites determined by the metal nuclearity and the electron-donor properties of the support, we report that atomically dispersed HY zeolite-supported rhodium with reactive acetylene ligands affords a stable ethylene selectivity > 90 % for acetylene semi-hydrogenation at 373 K and atmospheric pressure, even when ethylene is present in a large excess over acetylene. Infrared and X-ray absorption spectra and measurements of rates of the catalytic reaction complemented with calculations at the level of density functional theory show how the catalyst performance depends on the electronic structure of the rhodium, influenced by the support as a ligand that is a weak electron donor.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Understanding the Origin of Negative Temperature Dependence and Activity of N-Coordinated Cobalt Sites During Ethylene Dimerization
The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗