Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Structural and Magnetic Characteristics of Ferroxplana Co{sub 2}Y Nanoferrites Synthesized via Two Chemical Routes

Barium Y-type hexaferrite Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} nanopowders have been purposefully tailored using two different chemical wet methods, namely sol-gel auto-combustion (SGA) and co-precipitation (CP) routes. The impact of the pre-annealing and the annealing temperature of the formed precursors synthesized using two strategies on the structural, microstructure, and magnetic properties was investigated using x-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM). For instance, well-defined Ba{sub 2}Co{sub 2}Fe{sub 12}O{sub 22} hexagonal plate-like particles was observed using SGA and CP routes for the precursors pre-annealed at 600 {sup ∘}C for 4 h and then annealed at low temperature 1000 {sup ∘}C for 2 h. The magnetic properties measured at room temperature evinced that hexaferrite Co{sub 2}Y particles have ferromagnetic characteristics. Good magnetic properties involving saturation magnetization (M{sub s}) of 23.64 and 24.37 emu/g and the coercivity (H{sub c}) of 417.76 and 280.92 Oe were accomplished for the samples pre-annealed at 600 {sup ∘}C for 4 h and then annealed at 1000 {sup ∘}C for 2 h for SGA and CP methods, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and Thermophysical Investigations of CoFe{sub 2}O{sub 4}-based Nanofluid: a Potential Heat Transfer Agent

Cobalt ferrite nanoparticles were synthesized by employing chemical co-precipitation technique. The structure, morphology, elemental composition, and magnetization studies of cobalt ferrite nanoparticles were carried by XRD, FE-SEM, EDS, and VSM techniques, respectively. Rietveld refined XRD pattern exhibited the single-phase cubic spinel structure with Fd-3m space group. FE-SEM images indicated some agglomeration of spherical grains which can be attributed to high surface energy and magnetic interactions. Presence of peaks of respective elements (Co, Fe, and O) in EDS spectrum showed formation of CoFe{sub 2}O{sub 4}. The M–H loop recorded at 300 K revealed superparamagnetic behavior and explained by fine particles size. The blocking temperature of the CoFe{sub 2}O{sub 4}nanoparticles from FC-ZFC curve was found to be 144 K. Cobalt ferrite–ethylene glycol nanofluids of various concentrations 0.0–1.0% in steps of 0.2% were prepared by ultrasonically assisted two-step technique. Thermophysical parameters such as thermal conductivity, specific heat, viscosity, and density were investigated as a function of both volume fraction and temperature. The experimental and theoretical value of each sample was correlated. The thermal conductivity was significantly enhanced with an increase in volume fraction and temperature.

36 MATERIALS SCIENCE↗

Infrared Spectroscopic Study of Magnetic Behavior of Dysprosium Doped Magnetite Nanoparticles

Dysprosium doped magnetite (Fe{sub 3−x}Dy{sub x}O{sub 4} with x = 0.0–0.1) nanoparticles have been synthesized using the co-precipitation method. Magnetic characterization using vibrating sample magnetometer (VSM) has revealed an enhancement in the saturation magnetization with Dy{sup 3+} doping. The occupancy of the dopant ions in magnetite lattice has been probed using Fourier transform infrared spectroscopy (FTIR). The shifting of ν{sub 2} (Fe–O) band at 452 cm{sup − 1} for undoped samples to 443 cm{sup − 1} for dysprosium-doped samples is indicative of occupancy of dysprosium at the octahedral site. X-ray diffraction (XRD) patterns have been used to calculate the strain and lattice constant. The strain is found to increase with doping level and attained a maximum value for the x = 0.03. This increase in the strain can be attributed to occupancy of large diameter Dy{sup 3+} ions at the octahedral site of spinel structure of the magnetite lattice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Physical Properties of Mn{sub 2}O{sub 3} Nanoparticles Synthesized by Co-precipitation Method at Different pH Values

Mn{sub 2}O{sub 3} nanoparticles were synthesized at different pH values ranging from 10 to 13 by co-precipitation technique. The characterization of all samples were completed by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), ultraviolet-absorption spectroscopy (UV), Raman spectroscopy, and M–H loop measurements. The XRD spectra show that the structure of Mn{sub 2}O{sub 3} is cubic, and the lattice parameter a decreases as pH increases. Crystalline size, determined from TEM and XRD analyses, decreases as pH increases. TGA curves show that a mass loss is significantly affected as pH increases, indicating the decomposition of organic species besides the oxidation of Mn{sub 2}O{sub 3} to Mn{sub 3}O{sub 4}. FTIR spectra indicate that the absorption peaks at 593.73 and 519.09 cm{sup − 11} referred to the stretching vibration of Mn–O and Mn–O–Mn bonds during the synthesis of Mn{sub 2}O{sub 3} nanoparticles. UV-visible spectroscopy is measured in the range 250–800 nm and showed a deviation to the lower wavelength in addition to an increase in the band-gap energy (E{sub g}) values from 1.012 to 1.370 eV is obtained. Raman spectra shows a slight deviation to the left which is conversely proportional to the crystalline size. M–H loops for the prepared samples were measured and the results of retentivity (M{sub s}) and coercivity (H{sub c}) were discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Synthesis Approaches and Morphological Properties on Dielectric Enhancement and Microwave Absorption of Fe{sub 3}O{sub 4}/PANI Nanocomposites

In the present work, Fe{sub 3}O{sub 4} spherical (Fe{sub 3}O{sub 4}-cop) and raspberry-like (Fe{sub 3}O{sub 4}-hyd) nanoparticles were synthesized via co-precipitation and hydrothermal routes, respectively. Fe{sub 3}O{sub 4}/polyaniline (PANI) nanocomposites were prepared by in situ oxidative polymerization of aniline monomer in the presence of the Fe{sub 3}O{sub 4} materials. Characterization of the nanocomposites by XRD, FT-IR, FESEM, and TEM techniques revealed a core/shell structure for Fe{sub 3}O{sub 4}-hyd/PANI, unlike the PANI blocks with embedded Fe{sub 3}O{sub 4} and γ-Fe{sub 2}O{sub 3} observed in Fe{sub 3}O{sub 4}-cop/PANI composites. The larger and pure magnetite nanoparticles produced with the hydrothermal process and the respective nanocomposite with PANI possess higher magnetization and coercivity values, according to the magnetic investigation with VSM. Moreover, according to the electromagnetic characterization in the X-band, the Fe{sub 3}O{sub 4}-hyd/PANI nanocomposite exhibits the highest complex permittivity level, as a consequence of increased interfacial polarization in the Fe{sub 3}O{sub 4}-hyd/PANI system. On this account, reflection loss measurements have shown the superior microwave absorption capability of Fe{sub 3}O{sub 4}-hyd/PANI composite, compared with Fe{sub 3}O{sub 4}-cop/PANI, with a measured maximum of −31.28 dB at 8.5 GHz for 3.5 mm layer thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Zn Concentration on the Structure, Morphology, and Magnetic Behavior of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} Ferrofluid

In this work, we investigated the effect of doping zinc ions onto nickel ferrite upon the structure, morphology, and magnetic properties of Ni{sub 1 − x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite nanoparticles (x = 0, 0.25, and 0.75) prepared via co-precipitation method. X-ray diffraction analysis showed the presence of the most intense peak corresponding to the (311) crystallographic orientation of NiFe{sub 2}O{sub 4} cubic spinel phase, and the crystallite size obtained from Scherrer formula increased from 6.8 to 11.2 nm when the Zn concentration increases from x = 0 to x = 0.75. Fourier transform infrared spectroscopy analysis confirmed the presence of a prominent band associated to the vibrations of metal ions, as a feature of spinel ferrite phase formation, observing that their band positions were very sensitive to Zn doping concentration. Transmission electron microscopy studies allowed to determinate that for all Zn concentrations, the particle sizes are around 15 nm. The magnetic properties were studied by using the vibrating sample magnetometer at room temperature. The results reveal superparamagnetic behavior determined by the shape of the hysteresis loop, presenting decreased coercive magnetic field and increased saturation magnetization, with increased zinc concentration. Additionally, from field cooling and zero field cooling curves, we can observe the typical behavior of the blocking process assembly of superparamagnetic nanoparticles. Alternate current susceptibility measurements show that the blocking temperature is frequency dependent and shifts toward higher temperatures by increasing the frequency, a characteristic of superparamagnetic, and glassy systems. Furthermore, τ{sub 0}, related to the jump attempt frequency of the magnetic moment of the nanoparticle between the opposite directions of the magnetization easy axis, is in the range of 2 × 10{sup −10} and 7 × 10{sup −13} s for the three different Zn concentrations, which agrees with characteristic of non-interacting superparamagnetic systems.

36 MATERIALS SCIENCE↗

Structural and Electrical Dependence in Zn-Doped Li-Ferrite Nanostructures

Zinc-doped lithium ferrite nanoparticles with general formula Li{sub 0.46}Zn{sub 0.04}Fe{sub 2.5}O{sub 4} were prepared by Co-precipitation method and their thin films were grown by spin coating method. X-ray diffraction (XRD) confirmed the spinel structure of the synthesized samples. Fine morphology of the films was obtained by controlling the parameters. AC electrical properties including dielectric constant (έ), dielectric loss tangent (tanδ), AC electrical conductivity (σ{sub ac}), and impedance (Z) were studied as a function of frequency at different temperatures and at 1 MHz frequency in a temperature range of 40–500 °C. Dielectric constant, dielectric loss tangent, and ac electrical conductivity showed the decreasing trend with increase in temperature while opposite trend was observed for impedance. Zinc-doped Li-ferrite has better absorption properties in the studied frequency and temperature range as compared to that of Li-ferrites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Optical, Dielectric, and Magnetic Characteristics of Nd Ions Substituted BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub x}O{sub 19} M-Type Hexaferrite via Co-precipitation

Nanoparticles (NPs) of barium hexaferrite were synthesized by a chemical co-precipitation technique in an aqueous solution with a nominal composition of BaFe{sub 11}(Sn{sub 0.5}Mg{sub 0.5}){sub 1−x}Nd{sub x}O{sub 19} (x = 0, 0.5, 1). XRD and FTIR analyses were performed to study the crystal structure of the magnetic powders (MPs) in order to obtain details on the hexaferrite structure. Grain morphology and elemental composition were assessed by SEM and EDS, respectively, and nano-sized hexagonal platelet-like structures in all MPs were demonstrated. All of the structural parameters such as “a”, “c”, V{sub (cell)} and D{sub x} have been altered with successful incorporation of Nd into hexagonal lattices, thereby the band gap E{sub g} first increased x ≤ 0.5 then decreased up to x = 1 (i.e., drawn via a Tauc plot) from 1.53–1.82 eV. The measurements of dielectric properties depict relaxation behavior at higher frequencies. The dielectric measurements increase with increased hexaferrite. Furthermore, the magnetic properties of all MPs were examined by VSM at room temperature (RT). The saturation magnetization (M{sub s}), remnant magnetization (M{sub r}), and coercivity (H{sub c}) were linearly decreased by the SnMg content, whereas an increasing trend appeared with the additional Nd content. However, the squareness ratio increased with an increase in the content (x). These outcomes make this substitution an excellent candidate for multiple applications such as optical, electrical-based devices, circulators, and recording materials. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of Electrical and Magnetic Properties of La{sup 3+} Substituted M-Type Ba–Ni Nano-Ferrites

In this paper, La{sup 3+} substituted M-type Ba–Ni hexaferrite nanoparticles having composition Ba{sub 0.8}Ni{sub 0.2}Fe{sub 12-x}La{sub x}O{sub 19} (x = 0, 0.2, 0.4, 0.6, and 0.8) were prepared by co-precipitation route. The phase of the grown NPs was confirmed using X-ray diffraction analysis and results reveal the growth of M-type hexaferrite NPs as a major phase. The energy dispersive X-ray spectroscopy (EDX) was employed to determine the elemental composition of prepared samples. The FTIR spectra of synthesized samples confirm the bond formation of M-type hexaferrites. The optical bandgap was determined by UV-Vis spectroscopy and the results exhibit an increase in optical bandgap with decreasing crystallite size. The vibrating sample magnetometry (VSM) technique was used to analyze the effect of dopant on the magnetic properties like coercivity, saturation magnetization, and remanence of the synthesized samples. The electrical resistivity was measured by two probe method and it was observed that the activation energy shows a decreasing trend with increase in La content. The highly resistive nature of prepared nano ferrites indicates the potential to use these ferrites for high-frequency applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Oxide Additives on Phase Evolution and Tribological Behavior of Zirconia-Toughened Alumina Composite

Four different zirconia-toughened alumina added with different pairs of oxides (CeO{sub 2}, TiO{sub 2}, CuO, ZnO and SnO{sub 2}) were prepared through the co-precipitation technique. Conventional sintering resulted in relative densities ≥96%. Phase analyses of these composites were performed by x-ray diffraction. Vicker’s hardness and tribological behavior of all ZTA composites were studied. Microstructure analysis of polished and worn surfaces was carried out to understand and correlate the mechanical/tribological behavior with the microstructure. A different wear mechanism is observed in ZTA containing CeO{sub 2} and TiO{sub 2} which resulted in considerable improvement in tribological behavior with a minimum specific wear rate of 9 × 10{sup −7} mm{sup 3}/Nm.

36 MATERIALS SCIENCE↗

Room Temperature Adsorptive Removal of Thiophene over Zinc Oxide-Based Adsorbents

This study investigated the room temperature adsorptive removal of thiophene over zinc oxide adsorbents in the presence of hydrogen. The bulk zinc oxide was prepared by precipitation method and calcined at different temperatures in the range of 300-550 °C. Supported zinc oxide was prepared by co-precipitation of 30 wt.% ZnO with alumina and calcined at 550 °C. Properties of the adsorbents were determined by various characterization techniques such as surface area and pore volume analysis, XRD, FESEM, EDX and TPR. The desulfurization process was carried out in a down-flow packed bed reactor at room temperature (30 °C). The BET surface area of bulk zinc oxide adsorbents decreased with the increase in calcination temperature from 300 to 550 °C. The surface area of bulk zinc oxide adsorbents was 30.5 and 14.6 m{sup 2}/g when calcined at 300 and 550 °C, respectively. The surface are of supported zinc oxide adsorbents was 177 m{sup 2}/g. The highest average pore size was obtained for bulk ZnO calcined at 550 °C (45 nm) compared to that calcined at 300 °C (42 nm) and supported ZnO (27 nm). The XRD peaks corresponded to the hexagonal structure of zinc oxide. The removal of thiophene was most significant for bulk ZnO calcined at 550 °C. The higher removal efficiency for this adsorbent in spite of lower surface area may be attributed to its higher percentage of larger pores and higher average pore size.

36 MATERIALS SCIENCE↗

Molecular interaction of the first 3 enzymes of the de novo pyrimidine biosynthetic pathway of Trypanosoma cruzi

Highlights: Black-Right-Pointing-Pointer An Escherichia coli strain co-expressing CPSII, ATC, and DHO of Trypanosoma cruzi was constructed. Black-Right-Pointing-Pointer Molecular interactions between CPSII, ATC, and DHO of T. cruzi were demonstrated. Black-Right-Pointing-Pointer CPSII bound with both ATC and DHO. Black-Right-Pointing-Pointer ATC bound with both CPSII and DHO. Black-Right-Pointing-Pointer A functional tri-enzyme complex might precede the establishment of the fused enzyme. -- Abstract: The first 3 reaction steps of the de novo pyrimidine biosynthetic pathway are catalyzed by carbamoyl-phosphate synthetase II (CPSII), aspartate transcarbamoylase (ATC), and dihydroorotase (DHO), respectively. In eukaryotes, these enzymes are structurally classified into 2 types: (1) a CPSII-DHO-ATC fusion enzyme (CAD) found in animals, fungi, and amoebozoa, and (2) stand-alone enzymes found in plants and the protist groups. In the present study, we demonstrate direct intermolecular interactions between CPSII, ATC, and DHO of the parasitic protist Trypanosoma cruzi, which is the causative agent of Chagas disease. The 3 enzymes were expressed in a bacterial expression system and their interactions were examined. Immunoprecipitation using an antibody specific for each enzyme coupled with Western blotting-based detection using antibodies for the counterpart enzymes showed co-precipitation of all 3 enzymes. From an evolutionary viewpoint, the formation of a functional tri-enzyme complex may have preceded-and led to-gene fusion to produce the CAD protein. This is the first report to demonstrate the structural basis of these 3 enzymes as a model of CAD. Moreover, in conjunction with the essentiality of de novo pyrimidine biosynthesis in the parasite, our findings provide a rationale for new strategies for developing drugs for Chagas disease, which target the intermolecular interactions of these 3 enzymes.

60 APPLIED LIFE SCIENCES↗

Specific interaction between hnRNP H and HPV16 L1 proteins: Implications for late gene auto-regulation enabling rapid viral capsid protein production

Highlights: ► The RNA-binding hnRNP H regulates late viral gene expression. ► hnRNP H activity was inhibited by a late viral protein. ► Specific interaction between HPV L1 and hnRNP H was demonstrated. ► Co-localization of HPV L1 and hnRNP H inside cells was observed. ► Viral capsid protein production, enabling rapid capsid assembly, was implicated. -- Abstract: Heterogeneous nuclear ribonucleoproteins (hnRNPs), including hnRNP H, are RNA-binding proteins that function as splicing factors and are involved in downstream gene regulation. hnRNP H, which binds to G triplet regions in RNA, has been shown to play an important role in regulating the staged expression of late proteins in viral systems. Here, we report that the specific association between hnRNP H and a late viral capsid protein, human papillomavirus (HPV) L1 protein, leads to the suppressed function of hnRNP H in the presence of the L1 protein. The direct interaction between the L1 protein and hnRNP H was demonstrated by complex formation in solution and intracellularly using a variety of biochemical and immunochemical methods, including peptide mapping, specific co-immunoprecipitation and confocal fluorescence microscopy. These results support a working hypothesis that a late viral protein HPV16 L1, which is down regulated by hnRNP H early in the viral life cycle may provide an auto-regulatory positive feedback loop that allows the rapid production of HPV capsid proteins through suppression of the function of hnRNP H at the late stage of the viral life cycle. In this positive feedback loop, the late viral gene products that were down regulated earlier themselves disable their suppressors, and this feedback mechanism could facilitate the rapid production of capsid proteins, allowing staged and efficient viral capsid assembly.

60 APPLIED LIFE SCIENCES↗

Participation of the extracellular domain in (pro)renin receptor dimerization

Highlights: • The (pro)renin receptor [(P)RR] is a regulator of the renin–angiotensin system. • The region responsible for (P)RR dimerization was investigated. • (P)RR extracellular domain constructs were retained intracellularly. • The extracellular domain of (P)RR is responsible for its dimerization. • Novel insight into the regulatory mechanism of soluble (P)RR secretion is provided. - Abstract: The (pro)renin receptor [(P)RR] induces the catalytic activation of prorenin, as well as the activation of the mitogen-activated protein kinase (MAPK) signaling pathway; as such, it plays an important regulatory role in the renin–angiotensin system. (P)RR is known to form a homodimer, but the region participating in its dimerization is unknown. Using glutathione S-transferase (GST) as a carrier protein and a GST pull-down assay, we investigated the interaction of several (P)RR constructs with full-length (FL) (P)RR in mammalian cells. GST fusion proteins with FL (P)RR (GST-FL), the C-terminal M8-9 fragment (GST-M8-9), the extracellular domain (ECD) of (P)RR (GST-ECD), and the (P)RR ECD with a deletion of 32 amino acids encoded by exon 4 (GST-ECDd4) were retained intracellularly, whereas GST alone was efficiently secreted into the culture medium when transiently expressed in COS-7 cells. Immunofluorescence microscopy showed prominent localization of GST-ECD to the endoplasmic reticulum. The GST pull-down analysis revealed that GST-FL, GST-ECD, and GST-ECDd4 bound FLAG-tagged FL (P)RR, whereas GST-M8-9 showed little or no binding when transiently co-expressed in HEK293T cells. Furthermore, pull-down analysis using His-tag affinity resin showed co-precipitation of soluble (P)RR with FL (P)RR from a stable CHO cell line expressing FL h(P)RR with a C-terminal decahistidine tag. These results indicate that the (P)RR ECD participates in dimerization.

60 APPLIED LIFE SCIENCES↗

Interactions of cullin3/KCTD5 complexes with both cytoplasmic and nuclear proteins: Evidence for a role in protein stabilization

Based on its specific interaction with cullin3 mediated by an N-terminal BTB/POZ homologous domain, KCTD5 has been proposed to function as substrate adapter for cullin3 based ubiquitin E3 ligases. In the present study we tried to validate this hypothesis through identification and characterization of additional KCTD5 interaction partners. For the replication protein MCM7, the zinc finger protein ZNF711 and FAM193B, a yet poorly characterized cytoplasmic protein, we could demonstrate specific interaction with KCTD5 both in yeast two-hybrid and co-precipitation studies in mammalian cells. Whereas trimeric complexes of cullin3 and KCTD5 with the respective KCTD5 binding partner were formed, KCTD5/cullin3 induced polyubiquitylation and/or proteasome-dependent degradation of these binding partners could not be demonstrated. On the contrary, KCTD5 or Cullin3 overexpression increased ZNF711 protein stability. - Highlights: • KCTD5 nuclear translocation depends upon M phase and protein oligomerization. • Identification of MCM7, ZNF711 and FAM193 as KCTD5 interaction partners. • Formation of trimeric complexes of KCTD5/cullin3 with MCM7, ZNF711 and FAM193B. • KCTD5 is not involved in polyubiquitylation of MCM7 replication factor. • The KCTD5/cullin3 complex stabilizes ZNF711 transcription factor.

60 APPLIED LIFE SCIENCES↗

Functional characterization of lethal P-loop mutations in Tetrahymena outer arm dynein (Dyh3p)

Highlights: • A mutation system for analyzing lethal mutations in Dyh3p was established. • The P1 mutant dynein localizes in the oral apparatus and the proximal region of the cilia. • The P2 mutant dynein localizes only in the oral apparatus. • The P1 and P2 mutations decrease the swimming and feeding of Tetrahymena cells. • The P1 and P2 mutant dyneins show similar microtubule-binding properties. Mutational analyses of axonemal dyneins are useful for elucidating the molecular mechanism of ciliary motility. This study demonstrates a mutation system for characterizing lethal P-loop mutations in Tetrahymena outer arm dynein (Dyh3p). The viable DYH3-knockout (vKO-DYH3) cells isolated in this study enabled the examination of lethal mutations in P-loops 1 and 2. The P1 mutant dynein localized in the oral apparatus and the proximal region of the cilia, and the P2 mutant dynein localized only in the oral apparatus. Both results are different from the localization of wild-type Dyh3p. In addition, a co-precipitation assay showed that the P1 and P2 mutant dyneins did not dissociate from microtubules in ATP plus vanadate or in no-ATP conditions, in contrast to wild-type Dyh3p. This mutation system is useful for further molecular studies of axonemal dyneins and ciliary motility.

60 APPLIED LIFE SCIENCES↗

LABQ3: Bayesian method for quantification of mineral compositions and nano-scale elemental mapping of 3D synchrotron XCT data

Quantitative analysis of mineral compositions is essential in understanding geochemical, mineralogical and environmental processes. Fine-resolution 3D imaging is widely done using synchrotron X-ray computed tomography (XCT), but existing analyses are limited to visualization and segmentation. This paper presents a new method, Linear Attenuation Bayesian Quantitative 3D-mapper (LABQ3), based on the linearity of X-ray attenuation with respect to elemental concentrations. To address the random variability in attenuation measurements, LABQ3 employs Bayesian decision theory to minimize classification error, using reference attenuation distributions from scans of pure mineral standards. To demonstrate LABQ3 and test its performance, we studied precipitated carbonate samples. XCT scans were done at multiple energies using the transmission X-ray microscope (TXM) at beamline 32-ID-C of the Advanced Photon Source at Argonne National Laboratory. The reconstructed 3D images have a voxel size of 20 nm. Analyses revealed rich nano-scale compositional heterogeneity within individual particles. A mixture of calcium and cadmium produced an overall stoichiometric composition of (Ca 0.78 ,Cd 0.22 )CO 3 , with some voxels containing nearly pure CdCO 3 . The addition of zinc led to an overall stoichiometric composition of 33% Ca, 28% Cd, 39% Zn, with a nearly pure CaCO 3 core and compositional zonation through the rim. These compositional gradients are related to temporal sequences of carbonate mineral formation where Cd precipitated at the beginning in (Ca,Cd)CO 3 , while Cd and Zn precipitated at the end in (Ca, Cd,Zn)CO 3 . Results differ from bulk analyses using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), showing that LABQ3 provides particle-specific insights. LABQ3 distinguishes itself by quantifying chemical compositions along a continuum, making it different from XCT analyses based on segmentation. LABQ3 allows simultaneous acquisition of morphology and chemical composition in 3D, facilitating the interpretation of chemical gradients of trace elements, quantification of solid solution compositions, inferences about temporal sequences of mineral precipitation, and addressing other concerns about solid-phase chemistry.

58 GEOSCIENCES↗

Synthesis and characterization of the LDH hydrotalcite-pyroaurite solid-solution series

A layered double hydroxide (LDH) hydrotalcite-pyroaurite solid-solution series Mg{sub 3}(Al{sub x}Fe{sub 1-x})(CO{sub 3}){sub 0.5}(OH){sub 8} with 1 - x = 0.0, 0.1...1.0 was prepared by co-precipitation at 23 {+-} 2 {sup o}C and pH = 11.40 {+-} 0.03. The compositions of the solids and the reaction solutions were determined using ICP-OES (Mg, Al, Fe, and Na) and TGA techniques (CO{sub 3}{sup 2-}, OH{sup -}, and H{sub 2}O). Powder X-ray diffraction was employed for phase identification and determination of the unit cell parameters a{sub o} and c{sub o} from peak profile analysis. The parameter a{sub o} = b{sub o} was found to be a linear function of the composition. This dependency confirms Vegard's law and indicates the presence of a continuous solid-solution series in the hydrotalcite-pyroaurite system. TGA data show that the temperatures at which interlayer H{sub 2}O molecules and CO{sub 3}{sup 2-} anions are lost, and at which dehydroxylation of the layers occurs, all decrease with increasing mole fraction of iron within the hydroxide layers. Features of the Raman spectra also depend on the iron content. The absence of Raman bands for Fe-rich members (x{sub Fe} > 0.5) is attributed to possible fluorescence phenomena. Based on chemical analysis of both the solids and the reaction solutions after synthesis, preliminary Gibbs free energies of formation have been estimated. Values of {Delta}G{sup o}{sub f}(hydrotalcite) = - 3773.3 {+-} 51.4 kJ/mol and {Delta}G{sup o}{sub f}(pyroaurite) = - 3294.5 {+-} 95.8 kJ/mol were found at 296.15 K. The formal uncertainties of these formations constants are very high. Derivation of more precise values would require carefully designed solubility experiments and improved analytical techniques.

36 MATERIALS SCIENCE↗