Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLAYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The utility of surface temperature measurements for the remote sensing of surface soil water status

Experiments carried out on an Avondale loam soil indicated that the thermal inertia concept of soil water content detection is reasonably sound. The volumetric water contents of surface soil layers between 2 and 4 cm thick were found to be linear functions of the amplitude of the diurnal surface soil temperature wave for clear day-night periods. They were also found to be linear functions of the daily maximum value of the surface soil-air-temperature differential. Tests on three additional soils ranging from sandy loam to clay indicated that the relations determined for Avondale loam could not be accurately applied to these other soil types. When the moisture characteristic curves of each soil were used to transform water contents into pressure potentials, however, it was found that soil water pressure potential could be determined without prior knowledge of soil type, and thus its value as a potential soil water status survey tool was significantly enhanced.

Idso, S. B.↗
NASA NTRS1974

Study of the organic matter in the DSDP /JOIDES/ cores, legs 10-15

The composition of the organic matter collected on legs 10 to 15 of the DSDP (Deep Sea Drilling Project) is described. Distributions of various alkanes, carboxylic acids, steroids and terpenoids, isoprenoid ketones and olefins, and aromatic polycyclic compounds are given. Samples analyzed had terrigenous clay components, with variable organic carbon contents and thus diverse solvent soluble matter. The distribution patterns for the various compound series monitored were of marine derivation, with the terrigenous components superimposed. Diagenesis of steroids appeared to proceed via both stanones and stanols to their respective steranes. Degradative processes were observed to be operative: oxidative products, mainly ketones derived from steroids and phytol, were identified, probably due to microbial alteration prior to or during sedimentation. Loss of alkane and fatty acid C preferences and presence of polycyclic aromatics evinced maturation. Results indicate that the accumulation, degradation, diagenesis and maturation of organic matter occurs in various steps in the deep sea environment.

Simoneit, B. R. T.↗
NASA NTRS1975

Turbidity in extreme western Lake Superior

Data were obtained from ERTS images for western Lake Superior for 1972-74. Data examination showed that for easterly winds the turbidity originating along the Wisconsin shore and the resuspension areas are transported northward then out along a N.E. path where it disperses, and often, for large storms, contaminates the Duluth water intake. Contaminants such as dredging fines anywhere along these paths would likewise find their way to the intake areas in concentrations comparable to the relative red clay concentration.

Sydor, M.↗
NASA NTRS1975

Remote sensing inputs to water demand modeling

In an attempt to determine the ability of remote sensing techniques to economically generate data required by water demand models, the Geography Remote Sensing Unit, in conjunction with the Kern County Water Agency of California, developed an analysis model. As a result it was determined that agricultural cropland inventories utilizing both high altitude photography and LANDSAT imagery can be conducted cost effectively. In addition, by using average irrigation application rates in conjunction with cropland data, estimates of agricultural water demand can be generated. However, more accurate estimates are possible if crop type, acreage, and crop specific application rates are employed. An analysis of the effect of saline-alkali soils on water demand in the study area is also examined. Finally, reference is made to the detection and delineation of water tables that are perched near the surface by semi-permeable clay layers. Soil salinity prediction, automated crop identification on a by-field basis, and a potential input to the determination of zones of equal benefit taxation are briefly touched upon.

Estes, J. E.↗
NASA NTRS1976

The interaction between a solid body and viscous fluid by marker-and-cell method

A computational method for solving nonlinear problems relating to impact and penetration of a rigid body into a fluid type medium is presented. The numerical techniques, based on the Marker-and-Cell method, gives the pressure and velocity of the flow field. An important feature in this method is that the force and displacement of the rigid body interacting with the fluid during the impact and sinking phases are evaluated from the boundary stresses imposed by the fluid on the rigid body. A sample problem of low velocity penetration of a rigid block into still water is solved by this method. The computed time histories of the acceleration, pressure, and displacement of the block show food agreement with experimental measurements. A sample problem of high velocity impact of a rigid block into soft clay is also presented.

Cheng, R. Y. K.↗
NASA NTRS1975

Conservation and the industry sector

The following six highly energy intensive industries were studied as targets of energy conservation opportunity: food and kindred products, paper and allied products, chemicals and allied products, petroleum and coal products, stone, glass and clay products, and primary manufacturing. After studying conservation actions within each industry the actions were grouped under three broad categories: increased combustion efficiency, process improvement, and good housekeeping. Some of the results were: (1) approximately 2.18 quads could be saved in 1980 and 2.57 quads in 1985 by installing cogenerative facilities in 50% of the industries, (2) regenerative air-preheaters could result in a 10-15% increase in furnace efficiency representing a 15-25% fuel savings (2.3 to 3.9 quads in 1980 and 2.7 to 4.5 quads in 1985), (3) several major industries have potential for energy savings by recycling-aluminum (0.2 quads), steel (1 quad), glass (0.006 quads), paper and cement (0.08 quads).

Source record↗
NASA NTRS1975

The interpretation of ERTS-1 imagery for soil survey of the Merida region, Spain

The author has identified the following significant results. Major landforms and some subdivisions could be easily recognized. Water bodies, river courses, extensive areas of miocene clays, and more recent coarse textured deposits could be delineated and existing soil maps at scales up to 1:100,000 could be updated.

Hilwig, F. W.↗
NASA NTRS1976

Evaluation of surface water resources from machine-processing of ERTS multispectral data

The surface water resources of a large metropolitan area, Marion County (Indianapolis), Indiana, are studied in order to assess the potential value of ERTS spectral analysis to water resources problems. The results of the research indicate that all surface water bodies over 0.5 ha were identified accurately from ERTS multispectral analysis. Five distinct classes of water were identified and correlated with parameters which included: degree of water siltiness; depth of water; presence of macro and micro biotic forms in the water; and presence of various chemical concentrations in the water. The machine processing of ERTS spectral data used alone or in conjunction with conventional sources of hydrological information can lead to the monitoring of area of surface water bodies; estimated volume of selected surface water bodies; differences in degree of silt and clay suspended in water and degree of water eutrophication related to chemical concentrations.

Mausel, P. W.↗
NASA NTRS1975

Recent processed results from the Skylab S-192 multispectral scanner

Results of mapping of rock types from the White Sands, New Mexico area using digital tape data from the Skylab S-192 multispectral scanner are presented. Spectral recognition techniques were used to process the geological data and signatures were extracted from the training sets using a set of promising ratio features defined by analysis of ERSIS (Earth Resources Spectral Information System). An analysis of ERSIS spectra of rock types yielded 24 promising spectral channel ratio features for separating the rock types into precambrian, calcareous, and clay materials and those containing ferric iron.

Thomson, F. J.↗
NASA NTRS1976

Fiscal year 1976 progress report on a feasibility study evaluating the use of surface penetrators for planetary exploration

The feasibility of employing penetrators for exploring Mars was examined. Eight areas of interest for key scientific experiments were identified. These include: seismic activity, imaging, geochemistry, water measurement, heatflow, meteorology, magnetometry, and biochemistry. In seven of the eight potential experiment categories this year's progress included: conceptual design, instrument fabrication, instrument performance evaluation, and shock loading of important components. Most of the components survived deceleration testing with negligible performance changes. Components intended to be placed inside the penetrator forebody were tested up to 3,500 g and components intended to be placed on the afterbody were tested up to 21,000 g. A field test program was conducted using tentative Mars penetrator mission constraints. Drop tests were performed at two selected terrestrial analog sites to determine the range of penetration depths for anticipated common Martian materials. Minimum penetration occurred in basalt at Amboy, California. Three full-scale penetrators penetrated 0.4 to 0.9 m into the basalt after passing through 0.3 to 0.5 m of alluvial overburden. Maximum penetration occurred in unconsolidated sediments at McCook, Nebraska. Two full-scale penetrators penetrated 2.5 to 8.5 m of sediment. Impact occurred in two kinds of sediment: loess and layered clay. Deceleration g loads of nominally 2,000 for the forebody and 20,000 for the afterbody did not present serious design problems for potential experiments. Penetrators have successfully impacted into terrestrial analogs of the probable extremes of potential Martian sites.

Blanchard, M. B.↗
NASA NTRS1977

Results of analyses performed on soil adjacent to penetrators emplaced into sediments at McCook, Nebraska, January 1976

During 1976 several penetrators (full and 0.58 scale) were dropped into a test site McCook, Nebraska. The McCook site was selected because it simulated penetration into wind-deposited sediments (silts and sands) on Martian plains. The physical and chemical modifications found in the sediment after the penetrators' impact are described. Laboratory analyses have shown mineralogical and elemental changes are produced in the sediment next to the penetrator. Optical microscopy studies of material next to the skin of the penetrator revealed a layer of glassy material about 75 microns thick. Elemental analysis of a 0-1-mm layer of sediment next to the penetrator revealed increased concentrations for Cr, Fe, Ni, Mo, and reduced concentrations for Mg, Al Si, P, K, and Ca. The Cr, Fe, Ni, and Mo were in fragments abraded from the penetrator. Mineralogical changes occurring in the sediment next to the penetrator included the introduction of micron-size grains of alpha iron and several hydrated iron oxide minerals. The newly formed silicate minerals include metastable phases of silica (cristobalite, lechatelierite, and opal). The glassy material was mostly opal which formed when the host minerals (mica, calcite, and clay) decomposed. In summary, contaminants introduced by the penetrator occur up to 2 mm away from the penetrator's skin. Although volatile elements do migrate and new minerals are formed during the destruction of host minerals in the sediment, no changes were observed beyond the 2-mm distance. The analyses indicate 0.58-scale penetrators do effectively simulate full-scale testing for soil modification effects.

Blanchard, M.↗
NASA NTRS1976

Mineralogic and petrologic implications of Viking geochemical results from Mars - Interim report

Chemical results from four samples of Martian fines delivered to Viking landers 1 and 2 are remarkably similar in that they all have high iron; moderate magnesium, calcium, and sulfur; low aluminum; and apparently very low alkalies and trace elements. This composition is best interpreted as representing the weathering products of mafic igneous rocks. A mineralogic model, derived from computer mixing studies and laboratory analog preparations, suggests that Mars fines could be an intimate mixture of about 80% iron-rich clay, about 10% magnesium sulfate (kieserite), about 5% carbonate (calcite), and about 5% iron oxides (hematite, magnetite, maghemite, goethite). The mafic nature of the present fines (distributed globally) and their probable source rocks seems to preclude large-scale planetary differentiation of a terrestrial nature.

Baird, A. K.↗
NASA NTRS1977

Physical properties of the particles composing the Martian dust storm of 1971-1972

Data obtained with the infrared interferometric spectrometer (IRIS) aboard Mariner 9 during the global Martian dust storm of 1971-1972 are analyzed to study the particle sizes in detail, estimate the dust particle size distribution, and determine the dust optical depth. Theoretical spectra of the emergent intensity from dust clouds with properties similar to those of the Martian cloud are generated, deficiencies of the approximation used are discussed, and the information content of the IR aerosol spectra is assessed. Analysis of IRIS spectra from a series of orbits spread through the early months of the Mariner 9 mission indicates that the dust could have been either igneous material with an SiO2 content similar to or higher than that of a typical terrestrial sediment or clay minerals similar to those on earth. In either case, the Martian dust was differentiated by geologic or weathering processes. The dust particle size distribution between 1 and 10 microns is found to have a slope similar to that of terrestrial dust size distributions far from source regions.

Toon, O. B.↗
NASA NTRS1977

Diterpenoid compounds and other lipids in deep-sea sediments and their geochemical significance

Cyclic diterpenoid compounds have been found by various investigators in the geosphere (e.g., fossil resins, coals, soil, shale, and deep-sea sediments). These compounds occur in significant amounts only in higher plants and are therefore potential markers of terrigenous plant lipids. Diterpenoids with the abietane skeleton (mainly dehydroabietic acid) have been identified in the lipids of sediment samples from the northeast Pacific Ocean, Black Sea, and North Atlantic Ocean. The presence of these resin-derived compounds was correlated with the terrigenous clay components and with the presence of pollen. The presence of polycyclic diterpenoids was also correlated with the distribution patterns and inferred sources of other sediment lipid constituents. Potamic transport, followed by turbidite redistribution, is the probable input mechanism of these resin-derived compounds to the deep-sea sediments. These diterpenoids appear to be excellent biological markers of resinous higher plants.

Simoneit, B. R. T.↗
NASA NTRS1977

Asteroid surface materials: Mineralogical characterizations from reflectance spectra

Mineral assemblages analogous to most meteorite types, with the exception of ordinary chondritic assemblages, have been found as surface materials of Main Belt asteroids. C1- and C2-like assemblages (unleached, oxidized meteoritic clay minerals plus opaques such as carbon) dominate the population throughout the Belt, especially in the outer Belt. A smaller population of asteroids exhibit surface materials similar to C3 (CO, CV) meteoritic assemblages (olivine plus opaque, probably carbon) and are also distributed throughout the Belt. The majority of remaining studied asteroids (20) of 65 asteroids exhibit spectral reflectance curves dominated by the presence of metallic nickel-iron in their surface materials. The C2-like materials which dominate the main asteroid belt population appear to be relatively rare on earth-approaching asteroids.

Gaffey, M. J.↗
NASA NTRS1977

LANDSAT detection of hydrothermal alteration in the Nogal Canyon Cauldron, New Mexico

In 1974 a circular-shaped iron oxide anomaly was observed in an image of a LANDSAT frame centered near Truth or Consequences, New Mexico. Field examination of the anomaly has shown that it coincides with a zone of hydrothermal alteration on the northern edge of the Nogal Canyon Cauldron. The altered area contains clay minerals ranging in colors from white to vivid red, the latter presumably resulting from hematite staining. In situ gas measurements showed no evidence of active hydrogen sulfide seepage. Preliminary geochemical analyses of grab samples have detected no significant amounts of mineralization. Whereas this area does not at present appear to be economically important, it provides an example of how LANDSAT can be utilized in reconnaissance mapping for cauldrons, calderas, and other volcanic features which display hydrothermal alteration.

Vincent, R. K.↗
NASA NTRS1977

Remote infrared spectroscopy of the earth

The infrared reflexion-spectra of minerals and rocks are used for remote sensing of targets. The reflexion-spectra of silicate rocks vary quite significantly from mineral to mineral in the wave length region from 8 to 12 micrometers. The rock forming minerals like quartz, feldspar, mica and the clay minerals show very different spectral shapes and positions of their maximum of the spectral reflexion. The presence of a good atmospherical window in that spectral region makes the method of differential-reflexion measurement feasible, for remote sensing application. A tunable CO2-laser was used as transmitter for infrared radiation. Laboratory tests showed the feasibility of the method under different simulated environmental conditions. Because of the very narrow bandwidth of the laser-emission lines, reflexion-spectra with extremely high spectral resolution were obtained.

Steinmann, C. R.↗
NASA NTRS1978

Reflection spectra and magnetochemistry of iron oxides and natural surfaces

The magnetic properties and spectral characteristics of iron oxides are distinctive. Diagnostic features in reflectance spectra (0.5 to 2.4 micron) for alpha Fe2O3, gamma Fe2O3, and FeOOH include location of Fe3(+) absorption features, intensity ratios at various wavelengths, and the curve shape between 1.2 micron and 2.4 micron. The reflection spectrum of natural rock surfaces are seldom those of the bulk rock because of weathering effects. Coatings are found to be dominated by iron oxides and clay. A simple macroscopic model of rock spectra (based on concepts of stains and coatings) is considered adequate for interpretation of LANDSAT data. The magnetic properties of materials associated with specific spectral types and systematic changes in both spectra and magnetic properties are considered.

Wasilewski, P.↗