Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Millimeter/submillimeter spectroscopy of PH{sub 2}CN ( X-tilde {sup 1}A') and CH{sub 3}PH{sub 2} ( X-tilde {sup 1}A'): probing the complexity of interstellar phosphorus chemistry

Millimeter/submillimeter spectra of PH{sub 2}CN ( X-tilde {sup 1}A') and CH{sub 3}PH{sub 2} ( X-tilde {sup 1}A') have been recorded for the first time using direct absorption techniques. This work extends previous measurements of both molecules beyond the 10-50 GHz range. Both species were created in the presence of an AC discharge by the reaction of phosphorus vapor and either cyanogen and hydrogen (PH{sub 2}CN) or methane (CH{sub 3}PH{sub 2}). Twelve rotational transitions of PH{sub 2}CN were recorded over the region 305-422 GHz for asymmetry components K{sub a} = 0 through 8. For CH{sub 3}PH{sub 2}, eight rotational transitions were measured from 210-470 GHz with K{sub a} = 0 through 16; these spectra exhibited greater complexity due to the presence of internal rotation, which splits the K{sub a} = 1, 2, and 3 asymmetry components into A and E states. Combined analyses of the millimeter/submillimeter and previous microwave data were performed for both molecules. For PH{sub 2}CN, the spectra were fit with a Watson S-reduced asymmetric top Hamiltonian, resulting in more accurate rotational and centrifugal distortion constants. In the case of CH{sub 3}PH{sub 2}, an asymmetric top internal-rotation Hamiltonian was employed in the analysis, significantly improving the rotational and torsional parameters over previous microwave estimates. Searches for both molecules were subsequently conducted toward Sgr B2(N), using the 12 m telescope of the Arizona Radio Observatory (ARO). Neither species was identified, with abundance upper limits, relative to H{sub 2}, of f (PH{sub 2}CN/H{sub 2}) < 7.0 × 10{sup –12} and f (CH{sub 3}PH{sub 2}/H{sub 2}) < 8.4 × 10{sup –12}. The nitrogen analogs NH{sub 2}CN and CH{sub 3}NH{sub 2} are therefore more abundant in Sgr B2(N) by factors of >2 and >200, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

Crystallization and X-ray diffraction analysis of the CH domain of the cotton kinesin GhKCH2

The cloning, expression, purification and crystallization of the CH domain of the plant-specific kinesin GhKCH2 is reported. GhKCH2 belongs to a group of plant-specific kinesins (KCHs) containing an actin-binding calponin homology (CH) domain in the N-terminus. Previous studies revealed that the GhKCH2 CH domain (GhKCH2-CH) had a higher affinity for F-actin (K{sub d} = 0.42 ± 0.02 µM) than most other CH-domain-containing proteins. To understand the underlying mechanism, prokaryotically expressed GhKCH2-CH (amino acids 30–166) was purified and crystallized. Crystals were grown by the sitting-drop vapour-diffusion method using 0.1 M Tris–HCl pH 7.0, 20%(w/v) PEG 8000 as a precipitant. The crystals diffracted to a resolution of 2.5 Å and belonged to space group P2{sub 1}, with unit-cell parameters a = 41.57, b = 81.92, c = 83.00 Å, α = 90.00, β = 97.31, γ = 90.00°. Four molecules were found in the asymmetric unit with a Matthews coefficient of 2.22 Å{sup 3} Da{sup −1}, corresponding to a solvent content of 44.8%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Experimental Warming and Elevated CO 2 on CO 2 and CH 4 Fluxes in an Ombrotrophic Black-Spruce. Final Report

High latitude peatlands and permafrost soils contain nearly half of the soil carbon pool on Earth. The potential for large soil C stocks in peatlands and permafrost to become a positive feedback to climate change by increasing net emissions of CO₂ and CH₄ to the atmosphere is a subject of grave concern. This research was conducted at the Spruce and Peatland Responses Under Changing Environments (herein SPRUCE) experimental facility, located in the USDA’s Marcell Experimental Forest in northern Minnesota. The site is dominated by Picea mariana [herein black spruce], ericaceous shrubs and Sphagnum spp. Ten 12m-diameter open top chambers expose portions of the 8.1-ha S1 bog to warming up to +9°C in 2.25°C increments at ambient and elevated CO₂ (eCO₂, 900ppm). The Finzi lab group began manual measurements of CO₂ and CH₄ fluxes and their C-isotopic compositions in 2014. With funding from the DOE-TES program automated measurements of these species began in 2015. With a one-year no cost extension we were able to make measurements through the 2018 growing season. Across the study period we find that experimental warming of the peatland significantly increases the flux of CO₂ and CH₄ to the atmosphere. The highest temperature treatments had the highest fluxes. As peatlands have complex topography and water table dynamics, many of these results were contingent upon the topographic location in which the measurements were made. In the raised portions of the peatland divorced from the water table, fluxes of CO₂ were high and fluxes of CH₄ were low. By contrast, in the lower portions of the peatland surface, which is at or very near the water table, fluxes of CH₄ were substantially higher. A significant fraction of the total annual CH₄ flux was derived from episodic ebullitive fluxes. The occurrence and size of these ebullitive fluxes also increased with temperature. Experimental fumigation of the black spruce peatland with elevated concentrations of atmospheric CO₂ [herein eCO₂] also had significant effects on emissions of greenhouse gasses. In general these effects were far more subtle than the effects of rising temperature. This indicates that temperature change more than atmospheric chemistry changes are affect the belowground cycle of C in the peatland. Overall, this study shows that boreal peatlands are highly sensitive to changes in temperature. The warmer it becomes the more C will be lost from the peatland to the atmosphere. This appears to create a positive feedback loop that is likely to enhance the concentration of greenhouse gases in the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

SMA Line Observations of the CH{sub 3}OH-maser Outflow in DR21(OH)

We present a (sub)millimeter line survey of the methanol maser outflow located in the massive star-forming region DR21(OH) carried out with the Submillimeter Array (SMA) at 217/227 GHz and 337/347 GHz. We find transitions from several molecules toward the maser outflow such as CH{sub 3}OH, H{sub 2}CS, C{sup 17}O, H{sup 13}CO{sup +}, and C{sup 34}S. However, with the present observations, we cannot discard the possibility that some of the observed species such as C{sup 17}O, C{sup 34}S, and H{sub 2}CS, might be instead associated with the compact and dusty continuum sources located in the MM2 region. Given that most of transitions correspond to methanol lines, we have computed a rotational diagram with CASSIS and an LTE synthetic spectra with XCLASS for the detected methanol lines in order to estimate the rotational temperature and column density in the small solid angle of the outflow where enough lines are present. We obtain a rotational temperature of 28 ± 2.5 K and a column density of 6.0 ± 0.9 × 10{sup 15} cm{sup −2}. These values are comparable to those column densities/rotational temperatures reported in outflows emanating from low-mass stars. Extreme and moderate physical conditions to excite the maser and thermal emission coexist within the CH{sub 3}OH flow. Finally, we do not detect any complex molecules associated with the flow, e.g., CH{sub 3}OCHO, (CH{sub 3}){sub 2}CO, and CH{sub 3}CH{sub 2}CN.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE ORIGIN OF C{sub 4}H AND CH{sub 3}OH IN PROTOSTELLAR ENVELOPES

The formation pathways of different types of organic molecules in protostellar envelopes and other regions of star formation are subjects of intense current interest. We present here observations of C{sub 4}H and CH{sub 3}OH, tracing two distinct groups of interstellar organic molecules, toward 16 protostars in the Ophiuchus and Corona Australis molecular clouds. Together with observations in the literature, we present C{sub 4}H and CH{sub 3}OH data from single-dish observations of 40 embedded protostars. We find no correlation between the C{sub 4}H and CH{sub 3}OH column densities in this large sample. Based on this lack of correlation, a difference in line profiles between C{sub 4}H and CH{sub 3}OH, and previous interferometric observations of similar sources, we propose that the emission from these two molecules is spatially separated, with the CH{sub 3}OH tracing gas that has been transiently heated to high (∼70–100 K) temperatures and the C{sub 4}H tracing the cooler large-scale envelope where CH{sub 4} molecules have been liberated from ices. These results provide insight in the differentiation between hot corino and warm carbon-chain chemistry in embedded protostars.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved ELMv1-ECA simulations of zero-curtain periods and cold-season CH 4 and CO 2 emissions at Alaskan Arctic tundra sites

Field measurements have shown that cold-season methane (CH 4 ) and carbon dioxide (CO 2 ) emissions contribute a substantial portion to the annual net carbon emissions in permafrost regions. However, most earth system land models do not accurately reproduce cold-season CH 4 and CO 2 emissions, especially over the shoulder (i.e., thawing and freezing) seasons. Here we use the Energy Exascale Earth System Model (E3SM) land model version 1 (ELMv1-ECA) to tackle this challenge and fill the knowledge gap of how cold-season CH 4 and CO 2 emissions contribute to the annual totals at Alaska Arctic tundra sites. Specifically, we improved the ELMv1-ECA soil water phase-change scheme, environmental controls on microbial activity, and the methane module. Results demonstrate that both soil temperature and the duration of zero-curtain periods (i.e., the fall period when soil temperatures linger around 0°C) simulated by the updated ELMv1-ECA were greatly improved; e.g., the mean absolute error (MAE) in zero-curtain durations at 12 cm depth was reduced by 62 % on average. Furthermore, the MAEs of simulated cold-season carbon emissions at three tundra sites were improved by 72 % and 70 % on average for CH 4 and CO 2 , respectively. Overall, CH 4 emitted during the early cold season (September and October), which often includes most of the zero-curtain period in Arctic tundra, accounted for more than 50 % of the total emissions throughout the entire cold season (September to May) in the model, compared with around 49.4 % (43 %–58 %) in observations. From 1950 to 2017, both CO 2 emissions during the zero-curtain period and during the entire cold season showed increasing trends, for example, of 0.17 and 0.36 gC m -2 yr -1 at Atqasuk. This study highlights the importance of zero-curtain periods in facilitating cold-season CH 4 and CO 2 emissions from tundra ecosystems.

58 GEOSCIENCES↗

Observational discrimination between modes of shock propagation in interstellar clouds: Predictions of CH+ and SH+ column densities in diffuse clouds

Considerable effort in recent years has been devoted to the study of shocks in the diffuse interstellar medium. This work has been motivated partly by the observations of rotationally excited states of H2, and partly by the realization that species such as CH(+), OH and H2O might be formed preferentially in hot, post-shock gas. The problem of CH(+) and the difficulties encountered when trying to explain the high column densities, observed along lines of sight to certain hot stars, have been reviewed earlier. The importance of a transverse magnetic field on the structure of an interstellar shock was also demonstrated earlier. Transverse magnetic fields above a critical strength give rise to an acceleration zone or precursor, in which the parameters on the flow vary continuously. Chemical reactions, which change the degree of ionization of the gas, also modify the structure of the shock considerably. Recent work has shown that large column densities of CH(+) can be produced in magnetohydrodynamic shock models. Shock speeds U sub s approx. = 10 km/s and initial magnetic field strengths of a few micro G are sufficient to produce ion-neutral drift velocities which can drive the endothermic C(+)(H2,H)CH(+) reaction. It was also shown that single-fluid hydrodynamic models do not generate sufficiently large column densities of CH(+) unless unacceptably high shock velocities (u sub s approx. 20 km/s) are assumed in the models. Thus, the observed column densities of CH(+) provide a constraint on the mode of shock propagation in diffuse clouds. More precisely, they determine a lower limit to the ion-neutral drift velocity.

Flower, D. R.↗

Understanding of Active Sites and Interconversion of Pd and PdO during CH 4 Oxidation

Pd-based catalysts are widely used in the oxidation of CH 4 and have a significant impact on global warming. However, understanding their active sites remains controversial, because interconversion between Pd and PdO occurs consecutively during the reaction. Understanding the intrinsic active sites under reaction conditions is critical for developing highly active and selective catalysts. In this study, we demonstrated that partially oxidized palladium (PdO x ) on the surface plays an important role for CH 4 oxidation. Regardless of whether the initial state of Pd corresponds to oxides or metallic clusters, the topmost surface is PdO x , which is formed during CH4 oxidation. A quantitative analysis using CO titration, diffuse reflectance infrared Fourier-transform spectroscopy, X-ray diffraction, and scanning transmission electron microscopy demonstrated that a surface PdO layer was formed on top of the metallic Pd clusters during the CH 4 oxidation reaction. Furthermore, the time-on-stream test of CH 4 oxidation revealed that the presence of the PdO layer on top of the metallic Pd clusters improves the catalytic activity. Our periodic density functional theory (DFT) calculations with a PdO x slab and nanoparticle models aided the elucidation of the structure of the experimental PdO particles, as well as the experimental C-O bands. The DFT results also revealed the formation of a PdO layer on the metallic Pd clusters. This study helps achieve a fundamental understanding of the active sites of Pd and PdO for CH 4 oxidation and provides insights into the development of active and durable Pd-based catalysts through molecular-level design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Study of Support Effects for CH 4 and CO Oxidation over Pd Catalysts on ALD-Modified Al 2 O 3

Interactions between a metal and its oxide support can influence CO and CH 4 oxidation, but promotion by the support can be difficult to study because oxides can have different surface structures and surface areas. To focus on the chemical aspects of support promotion for CO and CH 4 oxidation, this study investigated the effect of support composition on Pd catalysts by preparing uniform films of NiO, Co 3 O 4 , Fe 2 O 3 , MnO 2 , CeO 2 , and ZrO 2 on γ-Al 2 O 3 using Atomic Layer Deposition (ALD). The structure of the films was characterized by XRD and STEM, and catalysts with ~ 1-wt% Pd were examined for CO and CH 4 oxidation. CeO 2 /γ-Al 2 O 3 was unique among the supports in greatly stabilizing the Pd dispersion to 1173 K. Rates for CO oxidation were enhanced by the presence of CeO 2 , Fe 2 O 3 , and MnO 2 , while the other oxides had no promotional effect. For CH 4 oxidation, only NiO and Co 3 O 4 were modest promoters, while the other reducible oxides even showed a negative effect on rates. Finally, possible reasons for the differences between CH 4 and CO oxidation activities are discussed.

42 ENGINEERING↗

Effects of SO 2 poisoning and regeneration on spinel containing CH 4 oxidation catalysts

Methane oxidation under periodic conditions and the oxygen storage capacity of a bilayer Pt/Pd/Al 2 O 3 over a Mn 0.5 Fe 2.5 O 4 spinel catalyst were studied before and after SO 2 exposure, and after simulated regeneration conditions. Prior to sulfur exposure, improvement in CH 4 oxidation conversion under periodic conditions compared to steady-state conditions was observed. After sulfur exposure at 100 °C, there was a loss in CH 4 oxidation performance and a loss of oxygen storage capacity of the spinel material. Here, the extent of regeneration from sulfur poisoning depends on the ability to induce the decomposition of sulfate species, and while all regeneration methods tested in this study did improve CH 4 conversion, regeneration methods under periodic conditions induced greater sulfur species desorption from the catalyst surface leading to improved CH 4 con version. Key regeneration parameters – temperature, feed composition, modulation amplitude and frequency – were optimized to induce S species decomposition and correlated to CH 4 oxidation activity recovery.

03 NATURAL GAS↗

CH 4 internal dry reforming over a Ni/YSZ/ScSZ anode catalyst in a SOFC: A transient kinetic study

We used a transient kinetic technique, which involves a step-switching of the reactant flows, to identify the reaction pathways on the Ni anode catalysts of SOFCs utilizing CH 4 /CO 2 and CH 4 as fuels. Carbon deposited at the external layer of the Ni anode support in CH 4 -SOFC. The transient response revealed that carbon deposition, which occurred with CH 4 as a fuel molecule, was suppressed and dominated by the dry reforming of CH 4 /CO 2 to CO/H 2 and the electrochemical oxidization of CO/H 2 . In conclusion, electricity generation from the electrochemical oxidation reactions is governed by Faraday resistance at the anode Ni catalyst interlayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of CO addition on the characteristics of laminar premixed CH{sub 4}/air opposed-jet flames

The effects of CO addition on the characteristics of premixed CH{sub 4}/air opposed-jet flames are investigated experimentally and numerically. Experimental measurements and numerical simulations of the flame front position, temperature, and velocity are performed in stoichiometric CH{sub 4}/CO/air opposed-jet flames with various CO contents in the fuel. Thermocouple is used for the determination of flame temperature, velocity measurement is made using particle image velocimetry (PIV), and the flame front position is measured by direct photograph as well as with laser-induced predissociative fluorescence (LIPF) of OH imaging techniques. The laminar burning velocity is calculated using the PREMIX code of Chemkin collection 3.5. The flame structures of the premixed stoichiometric CH{sub 4}/CO/air opposed-jet flames are simulated using the OPPDIF package with GRI-Mech 3.0 chemical kinetic mechanisms and detailed transport properties. The measured flame front position, temperature, and velocity of the stoichiometric CH{sub 4}/CO/air flames are closely predicted by the numerical calculations. Detailed analysis of the calculated chemical kinetic structures reveals that as the CO content in the fuel is increased from 0% to 80%, CO oxidation (R99) increases significantly and contributes to a significant level of heat-release rate. It is also shown that the laminar burning velocity reaches a maximum value (57.5 cm/s) at the condition of 80% of CO in the fuel. Based on the results of sensitivity analysis, the chemistry of CO consumption shifts to the dry oxidation kinetics when CO content is further increased over 80%. Comparison between the results of computed laminar burning velocity, flame temperature, CO consumption rate, and sensitivity analysis reveals that the effect of CO addition on the laminar burning velocity of the stoichiometric CH{sub 4}/CO/air flames is due mostly to the transition of the dominant chemical kinetic steps. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential retention and release of CO 2 and CH 4 in kerogen nanopores: Implications for gas extraction and carbon sequestration

Methane (CH 4 ) and carbon dioxide (CO 2 ), the two major components generated from kerogen maturation, are stored dominantly in nanometer-sized pores in shale matrix as (1) a compressed gas, (2) an adsorbed surface species and/or (3) a species dissolved in pore water (H 2 O). In addition, supercritical CO 2 has been proposed as a fracturing fluid for simultaneous enhanced oil/gas recovery (EOR) and carbon sequestration. A mechanistic understanding of CH 4 -CO 2 -H 2 O interactions in shale nanopores is critical for designing effective operational processes. Using molecular simulations, we show that kerogen preferentially retains CO 2 over CH 4 and that the majority of CO 2 either generated during kerogen maturation or injected in EOR will remain trapped in the kerogen matrix. The trapped CO 2 may be released only if the reservoir pressure drops below the supercritical CO 2 pressure. When water is present in the kerogen matrix, it may block CH 4 release. Furthermore, the addition of CO 2 may enhance CH 4 release because CO 2 can diffuse through water and exchange for adsorbed methane in the kerogen nanopores.

03 NATURAL GAS↗

Synthesis, structure, and optical properties of BiCuOCh (Ch=S, Se, and Te)

Crystals of BiCuOSe were grown from a salt flux, and the crystal structure was determined by single-crystal X-ray diffraction. BiCuOSe adopts the tetragonal layered structure of LnCuOCh (Ln=lanthanide; Ch=S, Se, and Te) with bond lengths and bond angles in good agreement with those published for powders. Powders comprising mixed chalcogenides across the series BiCuOCh (Ch=S, Se, and Te) were made by reacting Bi{sub 2}O{sub 2}Ch and Cu{sub 2}Ch. Band gaps determined via infrared diffuse reflectance from powders are E{sub g}=0.82 eV for BiCuOSe, 0.89 eV for BiCuOS{sub 0.5}Se{sub 0.5}, and 1.07 eV for BiCuOS. The band gap of BiCuOSe inferred from infrared transmission measurements on single crystals is in good agreement with the value obtained from diffuse reflectance from the powder. - Graphical abstract: IR absorption of BiCuOCh powders from diffuse reflection (left scale) and polished BiCuOSe single crystal from transmission (right scale). Spectra are normalized to the maximum absorption. Inset: band gap as a function of composition. Highlights: Black-Right-Pointing-Pointer BiCuOSe single crystals are synthesized, and the band gap is measured by direct transmission. Black-Right-Pointing-Pointer A new powder synthesis of BiCuOCh{sub 1-x}Ch Prime {sub x} is demonstrated. Black-Right-Pointing-Pointer Band gaps of BiCuO(S{sub 1-x}Se{sub x}) are determined from diffuse reflection from powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic, optical properties and chemical bonding in six novel 1111-like chalcogenide fluorides AMChF (A=Sr, Ba; M=Cu, Ag; and Ch=S, Se, Te) from first principles calculations

Employing first-principles band structure calculations, we have examined the electronic, optical properties and the peculiarities of the chemical bonding for six newly synthesized layered quaternary 1111-like chalcogenide fluorides SrAgSF, SrAgSeF, SrAgTeF, BaAgSF, BaAgSeF, and SrCuTeF, which are discussed in comparison with some isostructural 1111-like chalcogenide oxides. We found that all of the studied phases AMChF (A=Sr, Ba; M=Cu, Ag; and Ch=S, Se, Te) are semiconductors for which the fitted 'experimental' gaps lie in the interval from 2.23 eV (for SrAgSeF) to 3.07 eV (for SrCuTeF). The near-Fermi states of AMChF are formed exclusively by the valence orbitals of the atoms from the blocks (MCh); thus, these phases belong to the layered materials with 'natural multiple quantum wells'. The bonding in these new AMChF phases is described as a high-anisotropic mixture of ionic and covalent contributions, where ionic M-Ch bonds together with covalent M-Ch and Ch-Ch bonds take place inside blocks (MCh), while inside blocks (AF) and between the adjacent blocks (MCh)/(AF) mainly ionic bonds emerge. - Graphical Abstract: Isoelectronic surface for SrAgSeF and atomic-resolved densities of states for SrAgTeF, and SrCuTeF. Highlights: Black-Right-Pointing-Pointer Very recently six new layered 1111-like chalcogenide fluorides AMChF were synthesized. Black-Right-Pointing-Pointer Electronic, optical properties for AMChF phases were examined from first principles. Black-Right-Pointing-Pointer All these materials are characterized as non-magnetic semiconductors. Black-Right-Pointing-Pointer Bonding is highly anisotropic and includes ionic and covalent contributions. Black-Right-Pointing-Pointer Introduction of magnetic ions in AMChF is proposed for search of novel magnetic materials.

36 MATERIALS SCIENCE↗

Hall mobility in tin iodide perovskite CH{sub 3}NH{sub 3}SnI{sub 3}: Evidence for a doped semiconductor

CH{sub 3}NH{sub 3}SnI{sub 3} is a metal halide perovskite that shows metallic conductivity over a wide temperature range, although ab initio calculations and optical absorption indicate that its band structure is consistent with that of an intrinsic semiconductor. Hall effect measurements of as-grown crystals give a hole concentration of about 9×10{sup 17} cm{sup −3} with rather high Hall mobility of about 200 cm{sup 2} V{sup −1} s{sup −1} at 250 K. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility. These observations indicate that the electronic structure in stoichiometric CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. This situation leads to metal-like conduction with even a trace amount of spontaneous hole doping in the as-grown crystal. - Graphical abstract: Hall effect measurements of as-grown CH{sub 3}NH{sub 3}SnI{sub 3} crystals give a hole concentration of about 9×10{sup 17} cm{sup −3}. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility, indicating that the electronic structure of CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. Display Omitted - Highlights: • Hole concentration in highly conducting CH{sub 3}NH{sub 3}SnI{sub 3} was determined. • Hall mobility was not affected by artificial hole doping. • The electronic structure can be described as that of an intrinsic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transitions and unusual behavior of heat capacity in metal organic framework compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6}

Thermodynamic properties of high-porous metal-organic framework (MOF) compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6} were studied in the temperature range 8.9–300 K using low-temperature adiabatic calorymetry and DSC methods. Phase transitions were observed at ∼15, ∼60, and ∼135 K. It is shown that specific heat of the compound obeys the classical Debye law C{sub p}∼T{sup 3} only below 15 K, whereas above 15 K it is proportional to the first degree of temperature, C{sub p}∼T, to indicate a strong anisotropy of crystal vibrations corresponding to 1D continuum. It is shown that the strong anisotropy can be related to coordination interaction of Zn{sup 2+} and N{sub 2}(CH{sub 2}){sub 6} ligands in the specific structure of compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6}. - Graphical abstract: Specific heat C{sub p} is proportional to the first degree of temperature showing a strong anisotropy of crystal vibrations corresponding to 1D continuum in Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6.} - Highlights: • Specific heat capacity of Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6} was first studied at 8.9–300 K. • Phase transitions were observed at ∼15, ∼60, and ∼135 K. • The heat capacity is proportional to the first degree of temperature above 15 K. • The discovered dependency corresponds to a one-dimensional vibration continuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase stabilities of pyrite-related MTCh compounds (M=Ni, Pd, Pt; T=Si, Ge, Sn, Pb; Ch=S, Se, Te): A systematic DFT study

Pyrite-type and related systems appear for a wide range of binary and ternary combinations of transition metals and main group elements that form Zintl type dumbbell anion units. Those representatives with 20 valence electrons exhibit an extraordinary structural flexibility and interesting properties as low-gap semiconductors or thermoelectric and electrode materials. This work is devoted to the systematic exploration of novel compounds within the class of MTCh compounds (M=Ni, Pd, Pt; T=Si, Ge, Sn, Pb; Ch=S, Se, Te) by means of density functional calculations. Their preferred structures are predicted from an extended scheme of colored pyrites and marcasites. To determine their stabilities, competing binary MT{sub 2} and MCh{sub 2} boundary phases are taken into account as well as ternary M{sub 3}T{sub 2}Ch{sub 2} and M{sub 2}T{sub 3}Ch{sub 3} systems. Recently established stability diagrams are presented to account for MTCh ordering phenomena with a focus on a not-yet-reported ordering variant of the NiAs{sub 2} type. Due to the good agreement with experimental data available for several PtTCh systems, the predictions for the residual systems are considered sufficiently accurate. - Graphical abstract: Compositional and structural stability of MTCh compounds is investigated from first principle calculations. A conceptional approach is presented to study and predict novel stable and metastable compounds and structures of low gap semiconductors with TCh dumbbell units that are isoelectronic and structurally related to pyrite (FeS{sub 2}). - Highlights: • Study of compositional stability of MTCh vs. M{sub 3}T{sub 2}Ch{sub 2} and M{sub 2}T{sub 3}Ch{sub 3} compounds. • Study of structural stability of known and novel MTCh compounds. • Prediction of novel stable and metastable structures and compounds isoelectronic to pyrite, FeS{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗