Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bulk behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Magnetic Field Penetration Technique to Study High Field Shielding of Multilayered Superconductors

The SIS structure which consists of alternative thin layers of superconductors and insulators on a bulk niobium has been proposed to shield niobium cavity surface from high magnetic field and hence increase the accelerating gradient. The study of the behavior of multilayer super-conductors in an external magnetic field is essential to optimize their SRF performance. In this work we report the development of a simple and efficient technique to measure penetration of magnetic field into bulk, thin film and multilayer superconductors. Experimental setup contains a small superconducting solenoid which can produce a parallel surface magnetic field up to 0.5 T and Hall probes to detect penetrated magnetic field across the superconducting sample. This system was calibrated and used to study the effect of niobium sample thickness on the field of full magnetic flux penetration. We determined the optimum thickness of the niobium substrate to fabricate the multilayer structure for the measurements in our setup. This technique was used to measure penetration fields of Nb₃Sn thin films and Nb₃Sn/Al₂O₃ multi-layers deposited on Al₂O₃ wafers.

Senevirathne, I. H.↗
DOE OSTI2020

Experimental equation of state of 11 lanthanide nitrides (NdN to LuN) and pressure induced phase transitions in NdN, SmN, EuN, and GdN

Through an extensive data analysis of powder X-ray diffraction data obtained at pressures up to at least 78 GPa, we report the experimental equations of state for all lanthanide nitrides between NdN and LuN, excluding the radioactive Pm. By fitting the obtained unit cell volumes as a function of pressure with the third order Birch–Murnaghan equation of state, we find that the bulk modulus increases with an increasing lanthanide number from K 0 = 146(12) GPa for NdN to 182(7) GPa in EuN. Hereafter, the bulk modulus reaches a plateau for the rest of the series except for TmN which has a lower bulk modulus. We find that the first derivative of the bulk modulus is around 4 for all compounds except TbN, which displays a significantly different compression behavior. In addition, we find a B1 to B10 pressure-induced phase transition in NdN, SmN, EuN, and GdN at increasingly higher pressures. In fact, we observe that the onset pressure of the phase transition increases linearly with Ln atomic number. From TbN and onwards, we do not observe any sign of a B1 to B10 transition indicating that the transition pressure exceeds the studied pressure range. Therefore, we believe that, for the heavier lanthanides, the linear relationship between the onset pressure and the lanthanide number does not hold and even higher pressures are needed to observe the transition. This coherent study of the series of lanthanide nitrides offers a unique opportunity for benchmark studies of computational methods applied to compounds with 4f electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Pressure-induced metallization and loss of surface magnetism in FeSi

Single-crystalline FeSi samples with a conducting surface state were studied under high pressure and magnetic field by means of electrical resistance measurements to explore how the bulk semiconducting state and the surface state are tuned by the application of pressure. Here, we found that the energy gap associated with the semiconducting bulk phase begins to close abruptly at a critical pressure of ~10 GPa and the bulk material becomes metallic with no obvious sign of any emergent phases or non-Fermi liquid behavior in temperature dependent electrical resistance in the neighborhood of the critical pressure above 3 K. Moreover, the metallic phase appears to remain at near-ambient pressure upon release of the pressure. Interestingly, the hysteresis in the electrical resistance vs magnetic field curve associated with the magnetically ordered conducting surface state decreases with pressure and vanishes at the critical pressure, while the slope of the electrical resistance vs magnetic field curve, which has a negative value for pressure below the critical pressure, decreases in magnitude with pressure and changes sign at the critical pressure. Thus the conducting surface state and the corresponding two-dimensional magnetic order collapse at the critical pressure where the energy gap of the bulk material starts to close abruptly, revealing the connection between the conducting surface state and the semiconducting bulk state in FeSi.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Direct quantification of ion composition and mobility in organic mixed ionic-electronic conductors

Ion transport in organic mixed ionic-electronic conductors (OMIECs) is crucial due to its direct impact on device response time and operating mechanisms but is often assessed indirectly or necessitates extra assumptions. Operando x-ray fluorescence (XRF) is a powerful, direct probe for elemental characterization of bulk OMIECs and was used to directly quantify ion composition and mobility in a model OMIEC, poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS), during device operation. The first cycle revealed slow electrowetting and cation-proton exchange. Subsequent cycles showed rapid response with minor cation fluctuation (~5%). Comparison with optical-tracked electrochromic fronts revealed mesoscale structure–dependent proton transport. The calculated effective ion mobility demonstrated thickness-dependent behavior, emphasizing an interfacial ion transport pathway with a higher mobile ion density. The decoupling of interfacial effects on bulk ion mobility and the decoupling of cation and proton migration elucidate ion transport in conventional and emerging OMIEC-based devices and has broader implications for other ionic conductors writ large.

42 ENGINEERING↗
DOE OSTI2023

Nonequilibrium Behavior in Isoprene Secondary Organic Aerosol

Recent studies have shown that instantaneous gas-particle equilibrium partitioning assumptions fail to predict SOA formation, even at high relative humidity (~85%), and photochemical aging seems to be one driving factor. In this study, we probe the minimum aging time scale required to observe nonequilibrium partitioning of semivolatile organic compounds (SVOCs) between the gas and aerosol phase at ~50% RH. Seed isoprene SOA is generated by photo-oxidation in the presence of effloresced ammonium sulfate seeds at <1 ppbv NO x , aged photochemically or in the dark for 0.3–6 h, and subsequently exposed to fresh isoprene SVOCs. Our results show that the equilibrium partitioning assumption is accurate for fresh isoprene SOA but breaks down after isoprene SOA has been aged for as short as 20 min even in the dark. Modeling results show that a semisolid SOA phase state is necessary to reproduce the observed particle size distribution evolution. The observed nonequilibrium partitioning behavior and inferred semisolid phase state are corroborated by offline mass spectrometric analysis on the bulk aerosol particles showing the formation of organosulfates and oligomers. Here, the unexpected short time scale for the phase transition within isoprene SOA has important implications for the growth of atmospheric ultrafine particles to climate-relevant sizes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Evaluating the Chemical Reactivity of DFT-Simulated Liquid Water with Hydrated Electrons via the Dual Descriptor

Modeling the various properties of liquid water, particularly its reactivity, has been a longstanding challenge for simulation methods. Recently, ab initio simulations based on density functional theory (DFT) have come to the fore as tenable methods for calculating the properties and reactivity of water, with varying degrees of success for different exchange-correlation functionals. In particular, hybrid-GGA and meta-GGA functionals have been shown to reproduce many of the structural, dynamical, and energetic properties of water to a high degree of accuracy relative to their computational cost. Here, we show that the dual descriptor (DD) measure of nucleophilicity and electrophilicity, which is sometimes used to elucidate organic chemistry reaction mechanisms, can also be used to characterize the reactivity of DFTsimulated liquid water. The DD is especially apt for understanding the reactivity of excess electrons with water as its calculation explicitly involves adding and removing an excess electron from a reference system. We use the DD to explore the reactivity of water simulated using three different DFT functionals: the LDA functional (LDA), a hybrid-GGA functional (PBE0), and a hybrid meta- GGA functional (SCAN0). Using the DD, we show that the SCAN0 functional with the standard 25% Hartree–Fock exchange produces simulated liquid water with many regions that are far more reactive than either PBE0 or LDA. To understand the implications of these highly reactive regions, we then add a strong nucleophile in the form of an excess electron and find that although PBE0 and LDA predict stable hydrated electrons, the excess electron reacts nearly instantaneously with SCAN0 water via proton abstraction to form a hydrogen atom and hydroxide ion. We show that the DD provides the ability to not only predict whether or not liquid water will react with a hydrated electron but also which particular waters will be involved solely from analyzing pure water configurations generated with each functional. We rationalize this result in terms of the known trap-seeking behavior of injected hydrated electrons, which are able to find the most electronegative region in bulk water. These results highlight the utility of the dual descriptor as a fast and interpretable method for investigating condensed-phase reactivity with excess electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Full superconducting gap in the candidate topological superconductor In 1-x Pb x Te for x = 0.2

High-pressure synthesis techniques have allowed for the growth of samples on the indium-rich side of (Pb,In)Te, which have increased superconducting transition temperatures compared to lead-rich compounds. Here, we present measurements of the temperature dependence of the London penetration depth Δλ(T) in the compound In 0.8 Pb 0.2 Te, which shows a bulk T c,onset of ~ 4.75 K. The results indicate fully gapped BCS-like behavior, ruling out odd-parity topologically nontrivial A 2u , pairing, however, odd-parity A 1u , pairing is still possible. Critical field values measured below 1 K and other superconducting parameters are also presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Electric field driven domain wall dynamics in BaTiO 3 nanoparticles

We report a detailed investigation into the response of single BaTiO 3 (BTO) nanocrystals under applied electric fields (E-field) using Bragg coherent diffraction imaging. Our study reveals pronounced domain wall migration and expansion of a sample measure under applied electric field. The changes are most prominent at the surface of the nanocrystal, where the lack of external strain allows greater domain wall mobility. The observed domain shifts are correlated to the strength and orientation of the applied E-field, following a side-by-side domain model from Suzana []. Notably, we identified a critical electric field strength of 3 MV/m, which leads to irreversible structural changes, suggesting plastic deformation. The findings highlight how surface effects and intrinsic defects contribute to the enhanced dielectric properties of BTO at the nanoscale, in contrast to bulk materials, where strain limits domain mobility. These findings deepen our understanding of nanoscale dielectric behavior and inform the design of advanced nanoelectronic devices. Published by the American Physical Society 2025

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Shuttling Majorana zero modes in disordered and noisy topological superconductors

The braiding of Majorana zero modes (MZMs) forms the fundamental building block for topological quantum computation. Braiding protocols which involve the physical exchange of MZMs are typically envisioned on a network of topological superconducting wires. An important component of these protocols is the transport of MZMs, which can be performed by using electric gates to locally tune sections of the wire between topologically trivial and nontrivial phases. In this work, we numerically simulate this transport by tuning a single section of a superconducting wire which contains either disorder (uncorrelated and correlated) or noise. We focus on the impact of these additional effects on the diabatic error, which describes unwanted transitions between the ground state and excited states. We show that the behavior of the average diabatic error is predominantly controlled by the statistics of the minimum bulk energy gap which is suppressed in the presence of disorder. The increase in diabatic error can be several orders of magnitude and is most deleterious when the disorder correlation length is a finite fraction of the transport distance and negligible when these lengths are far apart. In the presence of noise, the diabatic error is significantly enhanced due to optical transitions which depend on the minimum bulk energy gap as well as the frequency modes present in the noise. The results presented here serve to further characterize the diabatic error in disordered and noisy settings, which are important considerations in practical implementations of physical braiding schemes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

UnifyFS: A User-level Shared File System for Unified Access to Distributed Local Storage

We introduce UnifyFS, a user-level file system that aggregates node-local storage tiers available on high performance computing (HPC) systems and makes them available to HPC applications under a unified namespace. UnifyFS employs transparent I/O interception, so it does not require changes to application code and is compatible with commonly used HPC I/O libraries. The design of UnifyFS supports the predominant HPC I/O workloads and is optimized for bulk-synchronous I/O patterns. Furthermore, UnifyFS provides customizable file system semantics to flexibly adapt its behavior for diverse I/O workloads and storage devices. In this paper, we discuss the unique design goals and architecture of UnifyFS and evaluate its performance on a leadership-class HPC system. In our experimental results, we demonstrate that UnifyFS exhibits excellent scaling performance for write operations and can improve the performance of application checkpoint operations by as much as 3× versus a tuned configuration.

Brim, Michael↗
DOE OSTI2021

Experiment and non-local crystal plasticity finite element study of nanoindentation on Al-8Ce-10Mg alloy

Cerium and magnesium strengthened aluminum alloys, or Al-Ce-Mg, is a recently developed alloy family that exhibits good mechanical properties at elevated temperatures (~300 °C). To examine the single-crystal properties of Al-Ce-Mg alloys, nanoindentation experiments are conducted in this study. A crystal plasticity finite element model (CPFEM) with the evolution of geometrically necessary dislocations (GNDs) is applied to simulate the indentation in individual grains. A parametric study is carried out to investigate the sensitivity of each crystal plasticity model parameter to the indentation behavior. The highly sensitive parameters are calibrated by matching the indentation load-depth curves, while the rest parameters are obtained from bulk polycrystal uniaxial tension tests. Overall, satisfactory matching between experiment and simulation is obtained for each individual grain. The calculated hardness, as determined from the experiment, shows the dependence on indent depth, which is captured by the GND model. Furthermore, the effect of grain orientation and neighboring grains to nanoindentation behavior have been discussed with the comparison between the simulation and experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Atomically Revealing Bulk Point Defect Dynamics in Hydrogen‐Driven γ‐Fe 2 O 3 → Fe 3 O 4 → FeO Transformation

Understanding how point defects in the bulk govern redox transformations is essential for advancing hydrogen-based metal production and designing high-performance oxide materials. This study reveals the atomic-scale mechanisms driving hydrogen-induced reduction of γ-Fe 2 O 3 to Fe 3 O 4 , focusing on how bulk vacancy dynamics dictate structural evolution and reaction kinetics. A key finding is the pronounced contrast in defect behavior between the two oxides: in γ-Fe 2 O 3 , intrinsic Fe vacancies promote oxygen vacancy clustering, destabilizing the local lattice and driving nanopore formation. In contrast, Fe 3 O 4 exhibits a higher oxygen vacancy formation energy and lacks intrinsic Fe vacancies, suppressing vacancy aggregation and maintaining a dense, pore-free structure. This divergence governs distinct reduction pathways—γ-Fe 2 O 3 undergoes an interface-reaction-limited transformation confined to the γ-Fe 2 O 3 /Fe 3 O 4 boundary, while Fe 3 O 4 supports a uniform increase in oxygen vacancy concentration, enabling bulk-phase reduction to lower-oxide FeO. Integrated in situ electron microscopy and density functional theory modeling uncover a vacancy-mediated mechanism, where synergistic cation-anion vacancy dynamics steer microstructure evolution and phase progression. These insights highlight the critical role of vacancy dynamics in controlling oxide reactivity and offer a pathway toward vacancy engineering to enhance reduction kinetics in hydrogen metallurgy and to tailor porosity, reactivity, and structural resilience in oxide-based catalysts and energy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Visualizing the atomic-scale origin of metallic behavior in Kondo insulators

A Kondo lattice is often electrically insulating at low temperatures. However, several recent experiments have detected signatures of bulk metallicity within this Kondo insulating phase. In this study, we visualized the real-space charge landscape within a Kondo lattice with atomic resolution using a scanning tunneling microscope. We discovered nanometer-scale puddles of metallic conduction electrons centered around uranium-site substitutions in the heavy-fermion compound uranium ruthenium silicide (URu 2 Si 2 ) and around samarium-site defects in the topological Kondo insulator samarium hexaboride (SmB 6 ). These defects disturbed the Kondo screening cloud, leaving behind a fingerprint of the metallic parent state. Our results suggest that the three-dimensional quantum oscillations measured in SmB 6 arise from Kondo-lattice defects, although we cannot exclude other explanations. Finally, our imaging technique could enable the development of atomic-scale charge sensors using heavy-fermion probes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Crystallization of nanopore-confined imidazolium ionic liquids probed by temperature-resolved in situ grazing-incidence wide angle X-ray scattering (GIWAXS)

The crystallization behavior of ionic liquids (ILs) 1-butyl-3-methylimidazolium [BMIM] hexafluorophosphate [PF 6 ] and chloride [Cl] is investigated upon confinement in 2.3 or 8.2 nm diameter silica nanopore arrays, along with the effects of covalently modifying the pore walls with 1-(3-trimethoxysilylpropyl)3-methylimidazolium [TMS-MIM] + groups. In situ grazing-incidence wide angle x-ray scattering (GIWAXS) is performed during heating from as low as -110 °C to room temperature. Partially ordered “nanodomains” are observed in both ILs in the bulk molten state, but they are disrupted by nanoconfinement. Melting point depression consistent with capillary effects is observed for [BMIM][PF 6 ] in 2.3 nm pores. However, the melting point is elevated for [BMIM][PF 6 ] in 8.2 nm pores, which provide sufficient space to stabilize the crystalline phase. For [BMIM][Cl], crystallization is observed only in 8.2 nm bare silica pores, but the melting point is severely depressed. Tethering with IL-like [TMS-MIM + ] also promotes the crystallization of [BMIM][PF 6 ], resulting in elevated melting points. The combined effects of a larger pore size and pore surface tethering on [BMIM][PF 6 ] result in a single stable crystal phase that persists from -140 °C to 25 °C (vs. the bulk melting point of -11 °C). These results show that when ILs are used in confined systems, complex crystallization behavior can emerge depending on the counterion, pore size, and surface modification that require consideration of ion layering in the confined space in addition to surface free energy effects.

He, Yuxin [University of Kentucky, Lexington, KY (↗
DOE OSTI2022

Shock compression behavior of stainless steel 316L octet-truss lattice structures

Lattice structures offer desirable mechanical properties for applications of energy absorption and impact mitigation but limited research has been carried out on their shock compression behavior. In this work, the shock compression behavior of stainless steel 316L (SS316L) octet-truss lattice structures was investigated through experimental techniques and numerical simulations. Plate impact experiments with high-speed imaging were conducted at impact velocities of 270 – 390 m/s on lattice specimens with 5x5x10 unit cell geometries additively manufactured (AM) using direct metal laser sintering. High-speed imaging together with digital image correlation was used to extract full-field measurements and define a two-wave structure consisting of an elastic wave and planar compaction (shock) wave which propagated along the impact direction. A linear shock velocity versus particle velocity relation was found to approximate the measurements with a unit slope and a linear fit constant equal to the crushing speed. Furthermore, the shock velocity versus particle velocity relation, full-field measurements, and elastic limit together with the Eulerian form of the Rankine-Hugoniot jump conditions were used to find relations for the stress and internal energy behind the shock. Stress behind the shock increased with relative density and particle velocity, and specific internal energy converged to a single curve similar to that of bulk AM SS316L. Explicit finite element analysis using the Johnson-Cook constitutive model demonstrated similar shock behavior observed in experiments and a linear shock velocity versus particle velocity relation and corresponding Hugoniot calculations were found to be in agreement with experimental results. Numerical simulations confirmed negligible effects of exterior versus interior measurements and further validated the application of one-dimensional shock theory.

42 ENGINEERING↗
DOE OSTI2024

Fermions, quantum gravity, and holography in two dimensions

We study a model comprising N flavors of Kähler Dirac fermion propagating on a triangulated two-dimensional disk which is constrained to have a negative average bulk curvature. Dirichlet boundary conditions are chosen for the fermions. Quantum fluctuations of the geometry are included by summing over all possible triangulations consistent with these constraints. We show in the limit N → ∞ that the partition function is dominated by a regular triangulation of two-dimensional hyperbolic space. We use strong coupling expansions and Monte Carlo simulation to show that in this limit boundary correlators of the fermions have a power law dependence on boundary separation as one expects from holography. However, we argue that this behavior breaks down for any finite number of massive fields in the thermodynamic limit and quantum fluctuations of the bulk geometry drive the theory into a nonholographic phase. In contrast, for massless fermions, we find evidence that the boundary is conformal even for finite N . This is consistent with theoretical results in quantum Liouville theory. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2021

Colloquium : Physical properties of group-IV monochalcogenide monolayers

The state-of-the-art knowledge of ferroelectric and ferroelastic group-IV monochalcogenide monolayers is surveyed. These semiconductors feature remarkable structural and mechanical properties, such as a switchable in-plane spontaneous polarization, soft elastic constants, structural degeneracies, and thermally driven two-dimensional structural transformations. Additionally, these 2D materials display selective valley excitations, valley Hall effects, and persistent spin helix behavior. After a description of their Raman spectra, a discussion of optical properties arising from their lack of centrosymmetry (such as an unusually strong second-harmonic intensity, large bulk photovoltaic effects, photostriction, and tunable exciton binding energies) is provided as well. Here, the physical properties observed in these materials originate from (correlate with) their intrinsic and switchable electric polarization, and the physical behavior hereby reviewed could be of use in nonvolatile memory, valleytronic, spintronic, and optoelectronic devices: these 2D multiferroics enrich and diversify the 2D material toolbox.

2D ferroelectrics↗