Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boosting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1969

Flight performance of Atlas-Agena launch vehicles in support of the Lunar Orbiter missions 3, 4, and 5

Atlas-Agena launch vehicles successfully boosted a series of five Lunar Orbiters into proper lunar transfer trajectories. This report discusses the flight performance of the last three Atlas-Agenda launch vehicles (for Lunar Orbiters 111, IV, and V) from lift-off through the Agenda retromaneuver. The objective of these flights was to perform seleno- graphic investigations including photography of the lunar surface. Lunar Orbiter V, launched in August 1967, concluded the Lunar Orbiter missions

Source record↗
NASA NTRS1969

Apollo 8 Mission Report

Postflight analysis of Apollo 8 mission. Apollo 8 was the second manned flight in the program and the first manned lunar orbit mission. The crew were Frank Borman, Commander; James A. Lovell, Command Module Pilot; and William A. Anders, Lunar Module Pilot. The Apollo 8 space vehicle was launched on time from Kennedy Space Center, Florida, at 7:51:00 AM, EST, on December 21, 1968. Following a nominal boost phase, the spacecraft and S-IVB combination was inserted - into a parking orbit of 98 by 103 nautical miles. After a post-insertion checkout of spacecraft systems, the 319-second translunar injection maneuver was initiated at 2:50:37 by reignition of the S-IVB engine.

Source record↗
NASA NTRS1972

GENENG 2: A program for calculating design and off-design performance of two- and three-spool turbofans with as many as three nozzles

A computer program which calculates steady-state design and off-design jet engine performance for two- or three-spool turbofans with one, two, or three nozzles is described. Included in the report are complete FORTRAN 4 listings of the program with sample results for nine basic turbofan engines that can be calculated: (1) three-spool, three-stream engine; (2) two-spool, three-stream, boosted-fan engine; (3) two-spool, three-stream, supercharged-compressor engine; (4) three-spool, two-stream engine; (5) two-spool, two-stream engine; (6) three-spool, three-stream, aft-fan engine; (7) two-spool, three-stream, aft-fan engine; (8) two-spool, two-stream, aft-engine; and (9) three-spool, two-stream, aft-fan engine. The simulation of other engines by using logical variables built into the program is also described.

Fishbach, L. H.↗
NASA NTRS1972

Shuttle on-orbit rendezvous targeting: Circular orbits

The strategy and logic used in a space shuttle on-orbit rendezvous targeting program are described. The program generates ascent targeting conditions for boost to insertion into an intermediate parking orbit, and generates on-orbit targeting and timeline bases for each maneuver to effect rendezvous with a space station. Time of launch is determined so as to eliminate any plane change, and all work was performed for a near-circular space station orbit.

Bentley, E. L.↗
NASA NTRS1972

Applications technology satellites advanced mission study

Three spacecraft configurations were designed for operation as a high powered synchronous communications satellite. Each spacecraft includes a 1 kw TWT and a 2 kw Klystron power amplifier feeding an antenna with multiple shaped beams. One of the spacecraft is designed to be boosted by a Thor-Delta launch vehicle and raised to synchronous orbit with electric propulsion. The other two are inserted into a elliptical transfer orbit with an Atlas Centaur and injected into final orbit with an apogee kick motor. Advanced technologies employed in the several configurations include tubes with multiple stage collectors radiating directly to space, multiple-contoured beam antennas, high voltage rollout solar cell arrays with integral power conditioning, electric propulsion for orbit raising and on-station attitude control and station-keeping, and liquid metal slip rings.

Gould, L. M.↗
NASA NTRS1972

Evaluation of coated columbian alloy heat shields for space shuttle thermal protection system application. Volume 1: Phase 1 - Environmental criteria and material characterization, October 1970 - March 1972

The studies presented are directed toward establishing criteria for a niobium alloy thermal protection system for the space shuttle. Evaluation of three niobium alloys and two silicon coatings for heat shield configurations culminated in the selection of two coating/substrate combinations for environmental criteria and material characterization tests. Specimens were exposed to boost and reentry temperatures, pressure, and loads simulating a space shuttle orbiter flight profile.

Black, W. E.↗
NASA NTRS1972

Centaur space vehicle pressurized propellant feed system tests

Engine firing tests, using a full-scale flight-weight vehicle, were performed to evaluate a pressurized propellant feed system for the Centaur. The pressurant gases used were helium and hydrogen. The system was designed to replace the boost pumps currently used on Centaur. Two liquid oxygen tank pressurization modes were studied: (1) directly into the ullage and (2) below the propellant surface. Test results showed the two Centaur RL10 engines could be started and run over the range of expected flight variables. No system instabilities were encountered. Measured pressurization gas quantities agreed well with analytically predicted values.

Source record↗
NASA NTRS1972

An analysis of proposed out-of-the-ecliptic-missions for the Helios spacecraft.

A mission analysis study has been performed to consider a proposed follow-on flight to Venus for the Helios spacecraft. The study basically considers a Venus swingby as the means of acquiring the desired extraecliptic trajectory. Several variations of a swingby-plus-propulsion mode have been examined to ascertain where these operational modes may lead to in terms of meeting the stated objectives. It has been found that the concept of a combined velocity boost-plus-swingby mode will produce an inclined trajectory plane satisfying the mission.-

Eades, J. B., Jr.↗
NASA NTRS1972

Unique solutions of spacecraft structural dynamics problems.

New ideas and techniques recently put to use at the Jet Propulsion Laboratory for structural dynamics of spacecraft are presented. This paper deals with practical problems rather than elaborate mathematical theories and is concerned with the system approach for structural dynamics, an approach which has received attention in the recent past owing to the use of the fast Fourier transform algorithm which permits an economical use of digital computers. Concept of dynamics mass in the frequency domain is introduced. Reaction forces and moments at the base of a spacecraft in boosted flight configuration are determined. A combination of digital and analog techniques for special problems is presented. The examples reported are on actual spacecraft.

Trubert, M. R.↗