Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAM PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

The Next Generation Muon Source at J-PARC/MLF

The Materials and Life Science Facility (MLF) is currently under construction at J-PARC in Tokai, Japan. The muon section of the facility will house the muon production target and four secondary beam lines used to transport the muons into two experimental halls. Currently, one of the four beam lines (the Decay beam line) has been completed and is operational. The beam line currently under construction is the large acceptance beam line (the so called Super-Omega beam line) which, when completed, will produce the highest intensity pulsed muon beam in the world. The expected rate of surface muons for this beam line is 4x10{sup 8} mu{sup +}/s, and a cloud muon rate of 10{sup 7} mu{sup -}/s. The beam line consists of the normal-conducting capture solenoids, the superconducting curved transport solenoids, and an axial focusing magnet. The capture solenoids have been fabricated and installed on the beam line, while the transport solenoids are under design, with initial prototype coils under fabrication.

43 PARTICLE ACCELERATORS↗

A Machine Learning Model for Predicting Composition of Catalytic Coprocessing Products from Molecular Beam Mass Spectra

Demand for the development of an automated and integrated refining process for biofuels has increased in recent years due to the lack of generalized process inspection tools. In bio-oil upgrading processes, all process variables are maintained based on the offline specification of intermediates and products. A lack of real-time product specifications in batch-wise monitoring can cause process failure and wasted resources. Therefore, there is a need for a fast and accurate intermediates/product specification tool that can be used for real-time specification to reduce waste and mitigate the risk of process failure. Here, to address this gap, we developed a machine learning (ML) model for predicting speciated bio-oil composition, including paraffin, iso-paraffins, olefins, naphthene, and aromatics. The model is trained using the mass spectra from upgraded products collected in the vapor phase before condensation and predicts the composition of the condensed product. Training ML models using raw mass spectra is challenging due to numerous overlapped peaks originating from different parent compounds. With this in mind, we propose a protocol that (i) transforms raw mass spectra to chemistry-inspired predefined features and (ii) trains decision tree-based models using these features. Our results show that the random forest model was robust against overfitting and had the highest accuracy compared to other models. Moreover, a stochastic ablation method determined the eight most significant features while maximizing the accuracy. Our protocol facilitates real-time compositional analysis of upgraded bio-oils and thus real-time process monitoring. Additionally, this protocol enables the rational design of efficient catalysts and the determination of optimal process conditions.

09 BIOMASS FUELS↗

Production of spin-polarized radioactive ion beams via projectile fragmentation reaction

Spin-polarized radioactive ion beams are produced in the projectile fragmentation reaction induced by intermediate-energy heavy ion beams. The degree of spin polarization shows characteristic dependence on the outgoing momentum of the projectile fragment in the magnitude around 1{approx}10%. The qualitative behavior is well described by the kinematical model of the fragmentation process. Recently, we have successfully produced spin-polarized beams of aluminum isotopes in the mass A{approx}30 region via the fragmentation of 95 MeV/u {sup 40}Ar projectiles. The magnetic moments of {sup 30}Al and {sup 32}Al and the electric quadrupole moments of {sup 31}Al and {sup 32}Al have been measured using the {beta}-NMR technique with the polarized RI beams of the Al isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radial compression of antiproton cloud for production of ultraslow antiproton beams

We report here the radial compression of a large number of antiprotons under ultrahigh vacuum conditions by applying a rotating electric field. The radial compression is a key technique for production of ultraslow antiproton beam extracting from an electromagnetic traps. Such beam will be applicable to synthesizing antiprotonic atoms and antihydrogen atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Beam Transport Testing for the Production Accelerator Arrangement

The beam transport system is designed to deliver an electron beam from the accelerator to the target. The design of the beam line depends on beam parameter (energy, energy spread, etc.) and target geometry. Elements of the beam transport system should provide transportation, focusing, and positioning of the beam onto the target surface.

43 PARTICLE ACCELERATORS↗

Studies of basic limitations on production, transport and acceleration of the high intensity polarized H{sup −} beam in the RHIC polarized ion source

Basic limitations on the high-intensity polarized H{sup −} ion beam production and transport were experimentally studied in charge-exchange collisions of the neutral atomic hydrogen beam in the Na-vaporjet ionizer cell. The energy dependence of space-charge effects on the beam instabilities and losses were studied and described in the model of synthetic H{sup +} — H{sup −} beam transport. A xenon gas admixture to the H{sup −} ion production cell and beam transport line greatly improves the space-charge compensation, which is also successfully described in the simulations. These studies are the part of the polarized source upgrade project for RHIC.

43 PARTICLE ACCELERATORS↗

Helicon plasma generator-assisted surface conversion ion source for the production of H{sup -} ion beams at the Los Alamos Neutron Science Center

The converter-type negative ion source currently employed at the Los Alamos Neutron Science Center (LANSCE) is based on cesium enhanced surface production of H{sup -} ion beams in a filament-driven discharge. In this kind of an ion source the extracted H{sup -} beam current is limited by the achievable plasma density which depends primarily on the electron emission current from the filaments. The emission current can be increased by increasing the filament temperature but, unfortunately, this leads not only to shorter filament lifetime but also to an increase in metal evaporation from the filament, which deposits on the H{sup -} converter surface and degrades its performance. Therefore, we have started an ion source development project focused on replacing these thermionic cathodes (filaments) of the converter source by a helicon plasma generator capable of producing high-density hydrogen plasmas with low electron energy. In our studies which have so far shown that the plasma density of the surface conversion source can be increased significantly by exciting a helicon wave in the plasma, and we expect to improve the performance of the surface converter H{sup -} ion source in terms of beam brightness and time between services. The design of this new source and preliminary results are presented, along with a discussion of physical processes relevant for H{sup -} ion beam production with this novel design. Ultimately, we perceive this approach as an interim step towards our long-term goal, combining a helicon plasma generator with an SNS-type main discharge chamber, which will allow us to individually optimize the plasma properties of the plasma cathode (helicon) and H{sup -} production (main discharge) in order to further improve the brightness of extracted H{sup -} ion beams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of U beam from RIKEN 18 GHz electron cyclotron resonance ion source

For the RIKEN radio isotope factory (RIBF) project, we produced the multicharged uranium beam with two methods. To produce lower charge state U ion beams (14+-20+) we used the UF{sub 6} gas as an ionized gas. The typical beam intensity of U{sup 14+-20+} was 2-1 particle {mu}A at the extraction voltage of 14 kV. To produce higher charge state U ion beam (U{sup 35+}), we chose the sputtering method. The beam intensity was 70 particle nA at the extraction voltage of 5.4 kV. Using this method, we successfully produced multicharged U beam continuously for one month without break for RIBF commissioning.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Production of cold beams of ND{sub 3} with variable rotational state distributions by electrostatic extraction of He and Ne buffer-gas-cooled beams

The measurement of the rotational state distribution of a velocity-selected, buffer-gas-cooled beam of ND{sub 3} is described. In an apparatus recently constructed to study cold ion-molecule collisions, the ND{sub 3} beam is extracted from a cryogenically cooled buffer-gas cell using a 2.15 m long electrostatic quadrupole guide with three 90° bends. (2+1) resonance enhanced multiphoton ionization spectra of molecules exiting the guide show that beams of ND{sub 3} can be produced with rotational state populations corresponding to approximately T{sub rot} = 9–18 K, achieved through manipulation of the temperature of the buffer-gas cell (operated at 6 K or 17 K), the identity of the buffer gas (He or Ne), or the relative densities of the buffer gas and ND{sub 3}. The translational temperature of the guided ND{sub 3} is found to be similar in a 6 K helium and 17 K neon buffer-gas cell (peak kinetic energies of 6.92(0.13) K and 5.90(0.01) K, respectively). The characterization of this cold-molecule source provides an opportunity for the first experimental investigations into the rotational dependence of reaction cross sections in low temperature collisions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Azimuthal correlations and alignment of particles in gamma families

Azimuthal angular correlations and the alignment of photons are studied in gamma families recorded by the Pamir Collaboration in a carbon x-ray emulsion chamber. The present interpretation of these experimental data is based on a model of semihard parton scattering in nucleon-nucleus collisions and on arguments favoring the production of exotic beam strings and heavy leading resonances undergoing quasicoplanar decays.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Production of intense positron beams at the VEPP-5 injection complex

A source of positrons allowing 5 Multiplication-Sign 10{sup 8} positrons accelerated to the energy of 70 MeV to be produced per pulse has been developed. The process of electron-positron pair production in an electromagnetic shower is used for production of positrons. The electromagnetic shower is generated in a tantalum target by a beam of 2 Multiplication-Sign 10{sup 10} electrons with energy 270 MeV. A high efficiency of positron collection (positron yield Y Almost-Equal-To 0.1 GeV{sup -1}) is ensured by a unique design of the matching device.

43 PARTICLE ACCELERATORS↗

Design and validation of a fission-product source for radioactive beams

A neutron-generator-based source of fission products (nuCARIBU) is being developed to replace the existing source at Argonne National Laboratory. Neutrons generated by reaction are thermalized in a compact polyethylene [(moderator and impinge on a thin 235 U foil to produce fission products. Experiments have been conducted to verify the nuCARIBU concept and simulation results using a 4 MeV, 0.16 µ⁢A proton beam from the ATLAS accelerator irradiating a LiF neutron production target and two different simplified versions of the nuCARIBU (C 2 ⁢H 4 ) n moderator with thicknesses of 3.81 cm and 1.91 cm separating it from the enriched 235 U fission foil. Here, the emitted γ-ray peaks of 1383.93 keV ( 92 Sr), 358.0 keV ( 104 Tc), 565.992 keV ( 134 Te), and 258.411 keV ( 138 Xe) obtained from fission products are used to determine the neutron-induced fission rates in the fission foil. The measured fission rates are in good agreement with those simulated using the PHITS Monte Carlo code with user-defined neutron production cross sections based on well-known cross section data. These experimental results, consistent with the simulations, show that the current 252 Cf source (CARIBU) can be replaced by the neutron induced fission source (nuCARIBU).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of Laser-Driven Proton and Electron Sources Using APRI 100-TW Ti:Sapphire Laser System

At the Advanced Photonics Research Institute (APRI) in Korea, we have a Ti:sapphire laser system which delivers laser pulses of 100-TW peak power and 32-fs pulse duration at the repetition rate of 10 Hz. This laser facility is being used to develop compact laser-driven proton and electron sources. Energetic protons are produced by irradiating the laser pulse on a thin foil target made of copper and polyimide via the target normal sheath acceleration. Proton beam with maximum energy of up to 4 MeV was generated from a polyimide target, and showed high energy conversion efficiency from laser to proton energy. Generation of high-energy electron beams by the laser wakefield acceleration was performed by focusing the laser pulses onto a 4 mm-long He-gas jet. Quasi-monoenergetic electron beam with peak energy of 45 MeV and maximum energy of 130 MeV was produced. The quality and characteristics of electron beams are strongly dependent on the laser-plasma interaction length which depends on focal length of the focusing optics.

43 PARTICLE ACCELERATORS↗

In-flight production of an isomeric beam of 16 N

In this work, an in-flight beam of 16 N was produced via the single-neutron adding ($\textit{d,p}$) reaction in inverse kinematics at the recently upgraded Argonne Tandem Linear Accelerator System (ATLAS) in-flight system. The amount of the 16 N beam which resided in its excited 0.120 MeV $J^\pi$ = 0 – isomeric state (T 1/2 ≈ 5 μs) was determined to be 40(5)% at a reaction energy of 7.9(3) MeV/$\textit{u}$, and 24(2)% at a reaction energy of 13.2(2) MeV/$\textit{u}$. The isomer measurements took place at an experimental station ≈ 30 m downstream of the production target and utilized an Al beam-stopping foil and a HPGe Clover detector. Composite 16 N beam rate determinations were made at the experimental station and the focal plane of the Argonne in-flight radioactive ion-beam separator (RAISOR) with Si ΔE-E telescopes. A Distorted Wave Born Approximation (DWBA) approach was coupled with the known spectroscopic information on 16 N in order to estimate the relative 16 N isomer yields and composite 16 N beam rates. In addition to the observed reaction-energy dependence of the isomer fraction, a large sensitivity to the angular acceptance of the recoils was also observed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗