Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Artificial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

The Dept. of Energy Artificial Retina Project

LLNL has assisted in the development of the first long-term retinal prosthesis - called an artificial retina - that can function for years inside the harsh biological environment of the eye. This work has been done in collaboration with four national laboratories (Argonne, Los Alamos, Oak Ridge and Sandia), four universities (the California Institute of Technology, the Doheny Eye Institute at USC, North Carolina State University and the University of California, Santa Cruz), an industrial partner (Second Sight® Medical Products Inc. of Sylmar, Calif.) and the U.S. Department of Energy. With this device, application-specific integrated circuits transform digital images from a camera into electric signals in the eye that the brain uses to create a visual image. In clinical trials, patients with vision loss were able to successfully identify objects, increase mobility and detect movement using the artificial retina.

60 APPLIED LIFE SCIENCES↗

NASA Framework for the Ethical Use of Artificial Intelligence (AI)

The NASA Framework for the Ethical Use of Artificial Intelligence (AI) provides six key principles to guide NASA's use of AI. The principles are NASA's AI must be 1. Fair, 2., Explainable and transparent, 3. Accountable, 4. Secure and safe, 5. Human-centric and societally beneficial, and 6. Scientifically and technically robust. The framework describes each ethical AI principle, and then applies that principle to NASA work. The framework also includes a list of questions practitioners should use to guide their AI work. Finally, the framework focuses on concrete, practical considerations for the next five - ten years, while also beginning to lay the foundation for longer-term disruptive change as human-level (or beyond) AI is created.

Artificial Intelligence↗

Quantum Magnetic Properties in Perovskite with Anderson Localized Artificial Spin‐1/2

Abstract Quantum magnetic properties in a geometrically frustrated lattice of spin‐1/2 magnet, such as quantum spin liquid or solid and the associated spin fractionalization, are considered key in developing a new phase of matter. The feasibility of observing the quantum magnetic properties, usually found in geometrically frustrated lattice of spin‐1/2 magnet, in a perovskite material with controlled disorder is demonstrated. It is found that the controlled chemical disorder, due to the chemical substitution of Ru ions by Co‐ions, in a simple perovskite CaRuO 3 creates a random prototype configuration of artificial spin‐1/2 that forms dimer pairs between the nearest and further away ions. The localization of the Co impurity in the Ru matrix is analyzed using the Anderson localization formulation. The dimers of artificial spin‐1/2, due to the localization of Co impurities, exhibit singlet‐to‐triplet excitation at low temperature without any ordered spin correlation. The localized gapped excitation evolves into a gapless quasi‐continuum as dimer pairs break and create freely fluctuating fractionalized spins at high temperature. Together, these properties hint at a new quantum magnetic state with strong resemblance to the resonance valence bond system.

74 ATOMIC AND MOLECULAR PHYSICS↗

Large Polarization and Susceptibilities in Artificial Morphotropic Phase Boundary PbZr 1– x Ti x O 3 Superlattices

The ability to produce atomically precise, artificial oxide heterostructures allows for the possibility of producing exotic phases and enhanced susceptibilities not found in parent materials. Typical ferroelectric materials either exhibit large saturation polarization away from a phase boundary or large dielectric susceptibility near a phase boundary. Both large ferroelectric polarization and dielectric permittivity are attained wherein fully epitaxial (PbZr 0.8 Ti 0.2 O 3 ) n /(PbZr 0.4 Ti 0.6 O 3 ) 2 n ( n = 2, 4, 6, 8, 16 unit cells) superlattices are produced such that the overall film chemistry is at the morphotropic phase boundary, but constitutive layers are not. Here, long- ( n ≥ 6) and short-period ( n = 2) superlattices reveal large ferroelectric saturation polarization ( P s = 64 µC cm –2 ) and small dielectric permittivity (ε r ≈ 400 at 10 kHz). Intermediate-period ( n = 4) superlattices, however, exhibit both large ferroelectric saturation polarization ( P s = 64 µC cm –2 ) and dielectric permittivity (ε r = 776 at 10 kHz). First-order reversal curve analysis reveals the presence of switching distributions for each parent layer and a third, interfacial layer wherein superlattice periodicity modulates the volume fraction of each switching distribution and thus the overall material response. This reveals that deterministic creation of artificial superlattices is an effective pathway for designing materials with enhanced responses to applied bias.

36 MATERIALS SCIENCE↗

Local Spin Ice Order Induced Planar Hall Effect in Nd–Sn Artificial Honeycomb Lattice

Geometrically frustrated materials, such as spin ice or kagome lattice, are known to exhibit exotic Hall effect phenomena due to spin chirality. For the first time, Hall effect mechanism is explored in an artificial honeycomb spin ice of Nd–Sn element using Hall probe and polarized neutron reflectivity measurements. In an interesting observation, a strong enhancement in Hall signal at relatively higher temperature of T ~20 K is detected. The effect is attributed to the planar Hall effect due to magnetic moment configuration in spin ice state in low field application. In the antiferromagnetic state of neodymium at low temperature, applied field induced coupling between atomic Nd moments and conduction electrons in underlying lattice causes distinct increment in Hall resistivity at very modest field of H ~ 0.015 T. The experimental findings suggest the development of a new research vista to study the planar and the field induced Hall effects in artificial spin ice.

36 MATERIALS SCIENCE↗

Topological monopole's gauge field‐induced anomalous Hall effect in artificial honeycomb lattice

Abstract Vortex magnetic structure in artificial honeycomb lattice provides a unique platform to explore emergent properties due to the additional Berry phase curvature imparted by chiral magnetization to circulating electrons via direct interaction. We argue that while the perpendicularly aligned magnetic component leads to the quantized flux of monopole at the center of the Berry sphere, the in‐plane vortex circulation of magnetization gives rise to unexpected nontrivial topological Berry phase due to the gauge field transformation. The unprecedented effect signifies the importance of vector potential in multiply connected geometrical systems. Experimental confirmations to proposed hypotheses are obtained from Hall resistance measurements on permalloy honeycomb lattice. Investigation of the topological gauge transformation due to the in‐plane chirality reveals anomalous quasi‐oscillatory behavior in Hall resistance as a function of perpendicular field. The oscillatory nature of is owed to the fluctuation in equilibrium current as a function of Fermi wave‐vector , envisaged under the proposed new formulation in this article. Our synergistic approach suggests that artificially tunable nanostructured material provides new vista to the exploration of topological phenomena of strong fundamental importance. Key Points Demonstration of gauge field flux due to vortex magnetism. Anomalous Hall effect in magnetic honeycomb lattice. Topological monopole‐induced magnetic flux.

Guo, Jiasen↗

Artificial neural network in cosmic landscape

In this study we propose that artificial neural network, the basis of machine learning, is useful to generate the inflationary landscape from a cosmological point of view. Traditional numerical simulations of a global cosmic landscape typically need an exponential complexity when the number of fields is large. However, a basic application of artificial neural network could solve the problem based on the universal approximation theorem of the multilayer perceptron. A toy model in inflation with multiple light fields is investigated numerically as an example of such an application.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Influence of Artificial Photodegradation on Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV)/Graphite Nanosheets (GNS) Nanocomposites

The potential use of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/graphite nanosheets (GNS) as a biodegradable nanocomposite has been explored. PHBV/GNS nanocomposites films were prepared by solution casting at various concentrations of GNS—0.25, 0.50 and 1.00 wt% GNS. The films were exposed to artificial ultraviolet radiation (UV) during 52 h. The effect of GNS on PHBV photodegradation was investigated and compared to neat PHBV film. The artificial photodegradation induced changes in physical (weight loss), chemical carbonyl index by Fourier transform infrared spectroscopy, thermal degree of crystallinity and melting temperature by differential scanning calorimetry and morphological scanning electron microscopy characteristics. Based on the results obtained from aforementioned analyzes it was verified that GNS inhibits the oxidative degradation of PHBV matrix.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.

36 MATERIALS SCIENCE↗

Study on Tribological Properties of CoCrMo Alloys against Metals and Ceramics as Bearing Materials for Artificial Cervical Disc

CoCrMo alloys are believed to be a kind of potential material for artificial cervical disc. However, the tribological properties of CoCrMo alloys against different metals and ceramics are not systematically studied. In this study, the tribological behaviors of CoCrMo alloys against metals (316L, Ti6Al4V) and ceramics (Si{sub 3}N{sub 4}, ZrO{sub 2}) were focused under dry friction and 25 wt.% newborn calf serum (NCS)-lubricated conditions using a ball-on-disc apparatus under reciprocating motion. The microstructure, composition and hardness of CoCrMo alloys were characterized using x-ray diffraction, scanning electron microscopy (SEM) and hardness testers, respectively. The contact angles of the CoCrMo alloys with deionized water and 25 wt.% NCS were measured by the OCA contact angle measuring instrument. The maximum wear width, wear depth and wear volume were measured by three-dimensional white light interference. The morphology and the EDX analysis of the wear marks on CoCrMo alloys were examined by SEM to determine the basic mechanism of friction and wear. The dominant wear mechanism in dry friction for CoCrMo alloys against all pairings was severe abrasive wear, accompanied with a lot of material transfer. Under 25 wt.% NCS-lubricated condition, the wear mechanism for CoCrMo alloys against ceramics (Si{sub 3}N{sub 4}, ZrO{sub 2}) was also mainly severe abrasive wear. However, severe abrasive wear and electrochemical corrosion occurred for the CoCrMo-316L pairing under lubrication. Severe abrasive wear, adhesive wear and electrochemical corrosion occurred for the CoCrMo-Ti6Al4V pairing under lubrication. According to the results, the tribological properties of CoCrMo alloys against ceramics were better than those against metals. The CoCrMo-ZrO{sub 2} pairing displayed the best tribological behaviors and could be taken as a potential candidate bearing material for artificial cervical disc.

36 MATERIALS SCIENCE↗

Tribocorrosion Behavior of SAF 2205 Duplex Stainless Steel in Artificial Seawater

Tribocorrosion behaviors of SAF 2205 duplex stainless steel sliding against an Al{sub 2}O{sub 3} counterpart were investigated in artificial seawater. The tribocorrosion mechanisms and synergistic actions between corrosion and wear were analyzed in this work. The results indicated that a higher load was beneficial for the formation of the σ intermetallic phase and strain hardening; thus, the hardness increased first, and then the pure mechanical wear resistance of SAF 2205 was improved by the hardening effect. The wear mechanisms of SAF 2205 were dominated by abrasive wear under lower loads and by abrasive wear and plastic deformation under higher loads. Furthermore, galvanic corrosion was established between the σ intermetallic phase/ferritic/austenitic and passive film (cathode)/fresh surface, which caused corrosion-accelerated wear. Thus, the total damage to SAF 2205 during tribocorrosion in artificial seawater was determined by the mechanical wear and synergetic effects between corrosion and wear. Therefore, improving hardness was an effective way to increase the tribocorrosion properties of metal materials, such as SAF 2205 and 316L.

36 MATERIALS SCIENCE↗

Electrochemical Characterization of Certain Mg-Based Alloys in Artificial Perspiration Biofluid for Consumer and Industrial Applications

The weight reduction of numerous consumer electronic devices is of increasing importance. In this respect, ultra-light magnesium alloys have attracted more attention to be used as frame materials. Nevertheless, Mg alloys are of intrinsically poor corrosion resistance, especially in chloride ion-containing environments. Human perspiration fluid with a relatively high chloride ions content (~ 0.14 M) comes in contact with a number of consumer products resulting in a variety of undesirable effects such as malfunction and corrosion. Based on that, the present work addresses the corrosion behavior of five AZ-Mg alloys including AZ91D, AZ80E, AZ31, AM60 and AXJ530 in artificial perspiration biofluid at human body temperature of 37 °C. The study is performed using electrochemical impedance spectroscopy and potentiodynamic polarization techniques supported by surface morphological and EDX spectra examinations. The surface layer total resistance value (R{sub T}) estimated from the analysis of obtained impedance data after 12-h exposure period reveals that durability of our tested samples increases in the following sequence: AZ80 > AZ91 > AZ31 > AM60 > AXJ530 > Mg (control). AZ80E alloy at top of this sequence points to its significantly high anti-corrosion performance in artificial perspiration biofluid and thus can be the best Mg materials of choice for many housing consumer electronic products. This outcome is in consistence with the corrosion rate (P{sub i} in mm y{sup −1}) trend as derived from the potentiodynamic polarization data that decreases in the following order: AZ80 (0.25) < AZ91 (0.49) < AZ31 (1.03) < AM60 (1.23) < AXJ530 (5.36) < Mg (5.98). Both FE-SEM images and EDX analyses further confirm these experimentally electrochemical findings.

36 MATERIALS SCIENCE↗

Utilizing computer vision and artificial intelligence algorithms to predict and design the mechanical compression response of direct ink write 3D printed foam replacement structures

Additive Manufacturing (AM) of porous polymeric materials, such as foams, recently became a topic of intensive research due their unique combination of low density, impressive mechanical properties, and stress dissipation capabilities. Conventional methods for fabricating foams rely on complex and stochastic processes, making it challenging to achieve precise architectural control of structured porosity. In contrast, AM provides access to a wide range of printable materials, where precise spatial control over structured porosity can be modulated during the fabrication process enabling the production of foam replacement structures (FRS). Current approaches for designing FRS are based on intuitive understanding of their properties or an extensive number of finite element method (FEM) simulations. These approaches, however, are computationally expensive and time consuming. As such, in this work, we present a novel methodology for determining the mechanical compression response of direct ink write (DIW) 3D printed FRS using a simple cross-sectional image. By obtaining measurement data for a relatively small number of samples, an artificial neural network (ANN) was trained, and a computer vision algorithm was used to make inferences about foam compression characteristics from a single cross-sectional image. Finally, a genetic algorithm (GA) was used to solve the inverse design problem, generating the AM printing parameters that an engineer should use to achieve a desired compression response from a DIW printed FRS. The methods developed herein present an avenue for entirely autonomous design and analysis of additively manufactured structures using artificial intelligence.

36 MATERIALS SCIENCE↗

Band-gap structure and chiral discrete solitons in optical lattices with artificial gauge fields

We study three-leg-ladder optical lattices loaded with repulsive atomic Bose–Einstein condensates and subjected to artificial gauge fields. By employing the plane-wave analysis and variational approach, we analyze the band-gap structure of the energy spectrum and reveal the exotic swallow-tail loop structures in the energy-level anti-crossing regions due to an interplay between the atom–atom interaction and artificial gauge field. In further, we discover stable discrete solitons residing in the forbidden zone above the maxima of the highest band, and we find that these discrete solitons are associated with chiral edge currents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A novel system of artificial antigen-presenting cells efficiently stimulates Flu peptide-specific cytotoxic T cells in vitro

Highlights: {yields} Adoptive immunotherapy depends on relevant numbers of cytolytic T lymphocytes. {yields} An ideal artificial APCs system was successfully prepared in vivo. {yields} Controlled release of IL-2 leads to much more T-cell expansion. {yields} This system is better than general cellular APCs on T-cell expansion. -- Abstract: Therapeutic numbers of antigen-specific cytotoxic T lymphocytes (CTLs) are key effectors in successful adoptive immunotherapy. However, efficient and reproducible methods to meet the qualification remain poor. To address this issue, we designed the artificial antigen-presenting cell (aAPC) system based on poly(lactic-co-glycolic acid) (PLGA). A modified emulsion method was used for the preparation of PLGA particles encapsulating interleukin-2 (IL-2). Biotinylated molecular ligands for recognition and co-stimulation of T cells were attached to the particle surface through the binding of avidin-biotin. These formed the aAPC system. The function of aAPCs in the proliferation of specific CTLs against human Flu antigen was detected by enzyme-linked immunospot assay (ELISPOT) and MTT staining methods. Finally, we successfully prepared this suitable aAPC system. The results show that IL-2 is released from aAPCs in a sustained manner over 30 days. This dramatically improves the stimulatory capacity of this system as compared to the effect of exogenous addition of cytokine. In addition, our aAPCs promote the proliferation of Flu antigen-specific CTLs more effectively than the autologous cellular APCs. Here, this aAPC platform is proved to be suitable for expansion of human antigen-specific T cells.

60 APPLIED LIFE SCIENCES↗

Phenylene-linked tetrapyrrole arrays containing free base and diverse metal chelate forms – Versatile synthetic architectures for catalysis and artificial photosynthesis

Tetrapyrrole macrocycles are central to photosynthesis yet a single macrocycle does not carry out photosynthesis; rather, assemblies of tetrapyrrole macrocycles work in concert in antenna complexes, reaction centers, and electron-transport chains to harvest sunlight, funnel excited-state energy and separate charge for biological use. A longstanding theme in artificial photosynthesis has been to construct covalently linked “arrays” of metalated and free base tetrapyrrole macrocycles for fundamental studies of such processes, which entail excited-state and ground-state interactions. Among linkers in arrays chemistry, the 1,2-, 1,3-, or 1,4-disubstituted phenylene unit has proved very attractive owing to the resulting short distance, defined architecture, and appropriate extent of electronic coupling of adjacent macrocycles to give rapid electron and/or energy transfer while largely retaining desired spectral features. Eight distinct strategies to construct phenylene-linked tetrapyrrole arrays are identified in a review with comprehensive coverage since inception in the early 1970s through mid-year 2021. The arrays predominantly incorporate porphyrins with very few chlorins and bacteriochlorins, reflecting historic availability of synthetic methods for macrocycle formation. Of the eight strategies, only two appear applicable to (bacterio)chlorins. While studies in artificial photosynthesis have largely fueled this field, applications in catalysis have also been examined. Altogether >400 arrays are covered. The review delves into synthesis and molecular design, sketches photophysical properties, and suggests unrealized opportunities in arrays chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PANNA: Properties from Artificial Neural Network Architectures

We report prediction of material properties from first principles is often a computationally expensive task. Recently, artificial neural networks and other machine learning approaches have been successfully employed to obtain accurate models at a low computational cost by leveraging existing example data. Here, we present a software package “Properties from Artificial Neural Network Architectures” (PANNA) that provides a comprehensive toolkit for creating neural network models for atomistic systems following the Behler–Parrinello topology. Besides the core routines for neural network training, it includes data parser, descriptor builder for Behler–Parrinello class of symmetry functions and force-field generator suitable for integration within molecular dynamics packages. PANNA offers a variety of activation and cost functions, regularization methods, as well as the possibility of using fully-connected networks with custom size for each atomic species. PANNA benefits from the optimization and hardware-flexibility of the underlying TensorFlow engine which allows it to be used on multiple CPU/GPU/TPU systems, making it possible to develop and optimize neural network models based on large datasets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of classical statistical methods and artificial neural network in traffic noise prediction

Traffic is the main source of noise in urban environments and significantly affects human mental and physical health and labor productivity. Therefore it is very important to model the noise produced by various vehicles. Techniques for traffic noise prediction are mainly based on regression analysis, which generally is not good enough to describe the trends of noise. In this paper the application of artificial neural networks (ANNs) for the prediction of traffic noise is presented. As input variables of the neural network, the proposed structure of the traffic flow and the average speed of the traffic flow are chosen. The output variable of the network is the equivalent noise level in the given time period L{sub eq}. Based on these parameters, the network is modeled, trained and tested through a comparative analysis of the calculated values and measured levels of traffic noise using the originally developed user friendly software package. It is shown that the artificial neural networks can be a useful tool for the prediction of noise with sufficient accuracy. In addition, the measured values were also used to calculate equivalent noise level by means of classical methods, and comparative analysis is given. The results clearly show that ANN approach is superior in traffic noise level prediction to any other statistical method. - Highlights: • We proposed an ANN model for prediction of traffic noise. • We developed originally designed user friendly software package. • The results are compared with classical statistical methods. • The results are much better predictive capabilities of ANN model.

54 ENVIRONMENTAL SCIENCES↗