Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced Nuclear Reactor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Nuclear Security Risks for HALEU Fuels

There is growing interest in high-assay low-enriched uranium (HALEU) for use in advanced nuclear reactors as a high-energy fuel source. The primary objectives of this report are to identify the security risks that directly result from HALEU and to identify the gaps and challenges it presents from a theft and sabotage perspective. This study focuses on HALEU security risks for the front end of the fuel cycle and includes a review of the supply chain, fuel fabrication, and transport for terrestrial reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Evaluation of AI-Enabled Digital Documented Safety Analysis: A Case Study

Safety basis documentation development and review under U.S. Department of Energy (DOE) authorization have emerged as critical constraint throttling deployment of advanced nuclear reactors, with traditional processes demanding extraordinary resource investment that delays the delivery of these technologies. Traditional Documented Safety Analysis (DSA) processes rely on static documents with limited traceability [U.S. DOE]. The regulatory review and engagement processes are similarly constrained, often requiring significant effort and extensive manual verification. The scale of this challenge is exemplified by the U.S. Nuclear Regulatory Commission (NRC) review of the NuScale application, which required over 250,000 staff hours and the evaluation of approximately two million pages of documentation [Bergman 2021]. The volume and complexity of information within nuclear licensing applications or authorization reviews demands innovative approaches to document generation and data management.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Advancing Diffusion Bonded Compact Heat Exchangers for High Temperature Applications

Enhancement of the diffusion bonding process for the development of compact heat exchangers (CHXs) provides an energy efficient solution for high-temperature applications in advanced nuclear reactors and other technologies. However, available information is limited concerning the diffusion bonding (and manufacturing) of CHXs in high temperature applications and associated selection of bonded materials, bonding conditions, mechanical performance, and thermo-fluid characteristics. Here this article reviews the available knowledge and the ongoing research being conducted to address gaps in information and application.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessing the Impact of Molten Halide Salts on Creep of Structural Alloys at 650°-750°C

There is a critical lack of data on the mechanical behavior of candidate structural materials for advanced nuclear reactors under molten halide salt environments. Limited legacy data from the molten salt reactor experiment (MSRE) program showed a significant reduction in creep rupture strength of a Ni-base alloy in molten fluoride salt. With ongoing efforts to commercialize different molten salt reactor concepts, the industry can considerably benefit from quantitative information on the impact of molten halide salts on the engineering properties such as creep and fatigue strength of materials of interest. The present work aims to assess the role of molten salt corrosion on the creep behavior of three alloys 316H, 617 and 282 at 650-816 °C. Creep tests were conducted in fluoride (FLiNaK) and chloride (NaCl-MgCl2) salts. Initial results from the ongoing testing will be presented which suggest that the molten salt environment caused a 25-50% reduction in creep rupture lifetime compared to air exposures. Physics-based corrosion and creep models were employed to gain some insights into the potential degradation mechanisms.

Pillai, Rishi↗
DOE OSTI2024

High-temperature thermal imaging to inform the arc-melt synthesis of nuclear materials

The advancement of nuclear energy technology necessitates the development of novel materials and synthesis methods to produce materials which enable new fuel cycles. Alongside the maturation of R&D scale technologies to produce these materials, there is an ongoing effort to develop in situ monitoring capabilities to reduce the time to the discovery and development of these fuels. Monitoring data can be leveraged in artificial intelligence platforms to detect phenomena which lead to varied macro- and microstructural features which impact the application and performance of samples synthesized. The present study presents early-stage findings of the implementation of high-temperature, high-frame-rate infrared thermal imaging to monitor the arc-melt synthesis of novel fuels and compounds relevant to advanced nuclear reactors. The study illustrates both the challenges and opportunities of this methodology, highlighting the importance of internal standards while determining emissivity and transmission values as well as visualizing volatilization during melt synthesis.

Stone, Jordan↗
DOE OSTI2023

Corrosion of Silica-Based Optical Fibers in Various Environments

This research article explores the potential of optical fibers as sensors, highlighting their ability to measure various parameters such as temperature, pressure, stress, and radiation dose. The study focuses on investigating the material compatibility of optical fibers in challenging sensing environments like Gen II/II+ and advance nuclear reactors, as well as concentrated solar power (CSP) plants. Material compatibility tests were conducted to determine the feasibility of using fluorine and germanium optical fiber sensors in these environments. The study found that raw fibers were corrosion-resistant to lead bismuth eutectic at 600 °C, regardless of the coating. In molten salt environments, raw fibers were incompatible with FLiNaK but showed corrosion resistance to MgCl₂-NaCl-KCl. However, the survivability of raw fiber optics improved with a gold coating in FLiNaK. Raw fiber optics were found to be incompatible in high-temperature steam at 1200 °C and in a pressurized water reactor (PWR) at 300 °C.

Leong, Amanda (ORCID:0000000307134493)↗
DOE OSTI2023

A Modified Embedded-Atom Method Potential for a Quaternary Fe-Cr-Si-Mo Solid Solution Alloy

Ferritic-martensitic steels, such as T91, are candidate materials for high-temperature applications, including superheaters, heat exchangers, and advanced nuclear reactors. Considering these alloys’ wide applications, an atomistic understanding of the underlying mechanisms responsible for their excellent mechano-chemical properties is crucial. Here, we developed a modified embedded-atom method (MEAM) potential for the Fe-Cr-Si-Mo quaternary alloy system—i.e., four major elements of T91—using a multi-objective optimization approach to fit thermomechanical properties reported using density functional theory (DFT) calculations and experimental measurements. Elastic constants calculated using the proposed potential for binary interactions agreed well with ab initio calculations. Furthermore, the computed thermal expansion and self-diffusion coefficients employing this potential are in good agreement with other studies. This potential will offer insightful atomistic knowledge to design alloys for use in harsh environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High Performance Pd/4H-SiC Epitaxial Schottky Barrier Radiation Detectors for Harsh Environment Applications

Although many refractory metals have been investigated as the choice of contact metal in 4H-SiC devices, palladium (Pd) as a Schottky barrier contact for 4H-SiC radiation detectors for harsh environment applications has not been investigated adequately. Pd is a refractory metal with high material weight-to-thickness ratio and a work function as high as nickel, one of the conventional metal contacts for high performing 4H-SiC Schottky barrier detectors (SBDs). In this article, Pd/4H-SiC epitaxial SBDs have been demonstrated for the first time as a superior self-biased (0 V applied bias) radiation detector when compared to benchmark Ni/4H-SiC SBDs. The Pd/4H-SiC SBD radiation detectors showed a very high energy resolution of 1.9% and 0.49% under self- and optimized bias, respectively, for 5486 keV alpha particles. The SBDs demonstrated a built-in voltage (V bi ) of 2.03 V and a hole diffusion length (L d ) of 30.8 µm. Such high V bi and L d led to an excellent charge collection efficiency of 76% in the self-biased mode. Capacitance mode deep level transient spectroscopy (DLTS) results revealed that the “lifetime-killer” Z 1/2 trap centers were present in the 4H-SiC epilayer. Another deep level trap was located at 1.09 eV below the conduction band minimum and resembles the EH5 trap with a concentration of 1.98 × 10 11 cm –3 and capture cross-section 1.7 × 10 –17 cm –2 ; however, the detector performance was found to be limited by charge trapping in the Z 1/2 center. The results presented in this article revealed the unexplored potential of a wide bandgap semiconductor, SiC, as high-efficiency self-biased radiation detectors. Such high performance self-biased radiation detectors are poised to address the longstanding problem of designing self-powered sensor devices for harsh environment applications e.g., advanced nuclear reactors and deep space missions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

NRIC Strategy for Advancing Nuclear Integrated Energy Systems

Integrated energy systems (IES) combine low-carbon energy sources to meet demand for clean energy in multiple forms across multiple sectors of economy. IES create opportunities to cost-effectively dispatch generation resources to balance electricity supply and demand. In addition to producing electricity, IES increase the value of non-emitting energy sources by integrating generation technologies with industrial processes to efficiently produce commodities that benefit the manufacturing, industrial processing, and transportation industries. Nuclear energy technology is key to enabling these benefits. Advanced nuclear reactors capable of producing high-quality heat, electricity, and radiation, will play a foundational role in IES of the future.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Impact of Irradiation-induced Lattice Defects and Dopants on Thermal Transport in Oxide Nuclear Fuels

Advanced nuclear reactor concepts aim to use fuels that must withstand unprecedented temperature and radiation extremes. In these fuels, thermal energy transport under irradiation is directly related to fuel longevity, reactor safety, and is arguably one of the most important performance metrics. Here we provide a comprehensive, first-principles-informed treatment of phonon mediated thermal transport in a defect-bearing actinide oxide with direct comparison to experimental measurements. Pristine and proton irradiated thorium dioxide was chosen as a model system to treat the complexity of thermal transport in the presence of lattice defects. A thermal transport model is implemented using the linearized Boltzmann transport equation (LBTE) with input from first principles calculations and defect evolution models. The output of the LBTE is compared directly to mesoscopic measurements of thermal conductivity on length scales commensurate with defect accumulation. Parametric measurements of conductivity with irradiation dose and temperature reveal a monotonic decrease in conductivity with irradiation dose, in the range of 0.001 dpa to 0.1 dpa. Besides radiation-induced defects, doping the thorium dioxide crystal with small quantities of uranium atoms also results in a drastic reduction in thermal conductivity. Temperature-dependent measurements of thermal conductivity in uranium-doped thorium dioxide single crystals suggests a resonant scattering mechanism is responsible for the observed reduction. This comprehensive, atomistic- to meso-scale treatment provides the necessary basis to investigate thermal transport under irradiation in more complex systems that exhibit strong electron correlation. This is a poster presentation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Nuclear Criticality Safety Pipeline Course with Hands-On Experimental Training at Lawrence Livermore's Inherently Safe Subcritical Assembly Training Center

The Nuclear Criticality Safety Divisions at Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL) have partnered with Prof. Massimiliano Fratoni of the University of California Berkeley to offer a semester long course on nuclear criticality safety. This course is part of a larger pipeline project among many of the Department of Energy (DOE) laboratories designed to stimulate student interest in the field of criticality safety. The course focuses on teaching the fundamentals of criticality safety, familiarity with national and consensus standards, and preparing criticality safety evaluations. Students also receive hands-on experience with special nuclear material by performing experiments with the Inherently Safe Subcritical Assembly (ISSA) at LLNL. Guest lectures are taught remotely and in-person by criticality safety engineers at LLNL and LANL, giving students an opportunity to interact with professionals in the field. The students complete a semester long project involving developing and writing a criticality safety evaluation. As universities tend to focus heavily on nuclear power and advanced nuclear reactor design, this course gives students a better understanding and perspective of what criticality safety entails. The goal of this pipeline course is to introduce students to criticality safety as another available field for nuclear engineers. It is also a way for criticality safety programs to identify talented students who have the interest and aptitude to work in criticality safety for hire upon graduation. LLNL and LANL have both hosted past students as summer students, participated in student's graduate projects, and hired students as criticality safety engineers. This has provided a unique opportunity for criticality safety programs to spot young talent with better retention outcomes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

A Summary of the Microstructural Characterization Results for the A709 Commercial Heats

To improve high temperature strength for advanced nuclear reactors, it is necessary to qualify additional structural materials for introduction into the American Society of Mechanical Engineers (AMSE) Boiler and Pressure Vessel Code (BPVC). Specifically, Alloy 709 was identified as a material for Sodium-cooled Fast Reactors to enhance time-dependent mechanical properties compared to 316H stainless steel, a code qualified high temperature alloy. Idaho National Laboratory (INL) and Oak Ridge National Laboratory (ORNL) performed initial microstructure and mechanical property testing on a third, commercial heat of Alloy 709 stainless steel. The Alloy 709 plate was produced by Allegheny Technology Inc. (ATI) and in the solution annealed condition. The chemical composition was within the limits for an American Society of Testing and Materials (ASTM) A213 specification for seamless tube for material UNS S31025. Grain size was measured as an average ASTM size of 6.5, which was larger than the ASTM 7 required according to ASTM A213 for seamless tube. The chemical composition was within the limits for an ASTM A213, and the room temperature tensile tests and hardness data met ASTM A213 specifications. Creep-fatigue results showed similar behavior to previous heats of Alloy 709.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Fluid Properties for MOOSE

The Multiphysics Object-Oriented Simulation Environment (MOOSE) enables a wide range of advanced nuclear reactor simulations. Under the guidance of MOOSE's Finite Volume Team, we worked on the fluid properties module. Significant contributions include enabling Tabulated Fluid Properties (TFP) for systems thermal hydraulics analysis, Temperature and Pressure functionalized Fluid Properties, and Lead & Lead-Bismuth properties. Along with improving the capabilities of the fluid properties module, we also improved the documentation to allow for future users and developers to understand how the module works.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

User-Oriented Improvements in the MOOSE framework in support of Multiphysics Simulation

The MOOSE Framework is a foundational capability used by NEAMS to create over 15 different simulation tools for advanced nuclear reactors. Due to this ubiquity, improvements to the framework in support of modeling and simulation goals are critical to the program. These improvements can take many forms including optimization, improved user experience, streamlined APIs, parallelism, and new capability. The work transcribed in the report was in direct support of the simulation tools and is already deployed or will be deployed in the coming months. The capabilities implemented were, in the same order as this report, chainable execution objects or executors, support for transfers between applications at the same level in a coupling scheme, support for boundary/subdomain restricted transfers, support for transfers between applications with different coordinate or unit systems, support for MOOSE applications in the NEAMS workbench, deployment of MOOSE application of the INL HPC OnDemand platform, addition of a triangular meshing library in libMesh and increased support of face variables.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Tabulated Fluid Properties Research Report

The Multiphysics Object-Oriented Simulation Environment (MOOSE) enables a wide range of advanced nuclear reactor simulations.[6] Under the guidance of MOOSE’s Thermal Hydraulics Team,I worked to expand the capabilities of Tabulated Fluid Properties (TFP) in the fluid properties module. The fluid properties module allows the user to determine a variety of fluid properties by interpolating points between tabulated data. I implemented the ability to use bilinear interpolation instead of bicubic interpolation for interpolating tabulated data. I also changed the method of variable set inversions to use a 2-dimensional Newton’s Method utility that I created. Variable set inversions are often done from (v,e) to (p,T), where v is specific volume, e is specific internal energy, p is pressure and T is temperature. New routines have also been added into TFP such that it can be used with more applications, such as the Navier Stokes and Thermal Hydraulics modules in MOOSE for Pronghorn[5] and RELAP-7[1] respectively. This work was spurred by interest from NASA in testing a Nuclear Thermal Propulsion (NTP) engine system. NTP engines have drastically different fluid properties throughout the engine and Tabulated Fluid Properties provides the flexibility needed to properly simulate and test these engines.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Investigation of the Impact of TSL Data Libraries and Geometry Variations on the MSRE Benchmark

The increasing demand for green, low-carbon energy solutions has amplified the focus on advanced nuclear reactor technologies. Among these, Molten Salt Reactors (MSRs) have been spotlighted because of their special features. Historically, Oak Ridge National Laboratory (ORNL) started the Molten Salt Reactor Experiment (MSRE) in 1956. Later, ORNL and the University of California, Berkeley (UCB) jointly developed the MSRE benchmark. This was then reviewed by the International Reactor Physics Experiment Evaluation Project (IRPhEP) committee and added to their 2019 handbook. In the current study, the benchmark model was recreated via the Serpent code. The calculated effective multiplication factor was 1.02087 ± 0.00019, which gives a deviation of about 2000 pcm compared to the benchmark/experimental result. At North Carolina State University (NCSU), recent evaluations were conducted on thermal scattering cross sections for molten salt FLiBe and 20% porous nuclear graphite, anticipated for incorporation in the ENDF/B-VIII.1 library. The influences of these thermal scattering law (TSL) data and geometry changes on the multiplication factor were examined using the ENDF/B-VII.1 and ENDF/B-VIII.0 libraries. Introducing the TSL data for FLiBe and 20% porous graphite resulted in an effective multiplication factor of +270 pcm compared to the reference value obtained with ENDF/B-VII.1 in this study. The adjustment of the reactor vessel dimensions resulted in decrease of -448 pcm in the calculated effective multiplication factor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

DESIGN AND PROTOYPING OF A FISSILE-BEARING CHLORIDE SALT IRRADIATION EXPERIMENT

Limited data exists on the properties of irradiated fueled chloride-based salts for use in advanced nuclear reactors. The design and prototyping of a salt irradiation experiment is underway. Mechanical design will integrate the experiment into existing assemblies in TRIGA type cores. Neutronics modeling demonstrated how targeted power densities can be reached and provide insight on radionuclide source term generation within the experiment. Thermal-hydraulic and computational fluid dynamics (CFD) analysis indicated that temperature ranges in the salt can satisfy both safety and programmatic requirements. Initial prototyping tests provided confidence in the ability to extract the salt post-irradiation, and in the heater performance. Future planned prototyping will provide an integral assessment of the proposed design prior to insertion in the reactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗