Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced Instrumentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Introduction: Photons and Ground-Based

A Conference on Measurement Techniques for Solar and Space Physics was held on 20-24 April 2015 in Boulder, Colorado, at the National Center for Atmospheric Research Center Green Campus. The present volume collects together the conference papers for photons and ground-based categories. This gathering of over 200 scientists and instrumentalists was born out of the desire to collect in one place the latest experiment and instrument technologies required for advancement of scientific knowledge in the disciplines of solar and space physics. The two goals for this conference and the subsequent publication of its content are (a) to describe measurement techniques and technology development needed to advance high priority science in the fields of solar and space physics; and (b) to provide a survey or reference of techniques for in situ measurement and remote sensing of space plasmas. Towards this end, our goal has always been inspired by the two 1998 Geophysical Monographs (Nos. 102 and 103) entitled, "Measurement Techniques in Space Plasmas" (particles and fields) [Pfaff et al., 1998a, 1998b], which have served as a reference and resource for advanced students, engineers, and scientists who wish to learn the fundamentals of measurement techniques and technology in this field. Those monographs were the product of an American Geophysical Union Chapman Conference that took place in Santa Fe, NM, in 1995: "Measurement Techniques in Space Plasmas-What Works, What Doesn't." Two decades later, we believe that it is appropriate to revisit this subject, in light of recent advances in technology, research platforms, and analysis techniques. Moreover, we now include direct measurements of neutral gases in the upper atmosphere, optical imaging techniques, and remote observations in space and on the ground. Accordingly, the workshop was organized among four areas of measurement techniques: particles, fields, photons, and ground-based. This two-set volume is largely composed of the content of that workshop. Special attention is given to those techniques and technologies that demonstrate promise of significant advancement in measurements that will enable the highest priority science as described in the 2012 National Research Council Decadal Survey [Baker and Zurbuchen et al., 2013]. Additionally, a broad tutorial survey of the current technologies is provided to serve as reference material and as a basis from which advanced and innovative ideas can be discussed and pursued. Included are instrumentation and techniques to observe the solar environment from its interior to its outer atmosphere, the heliosphere out to the interstellar regions, in geospace, and other planetary magnetospheres and atmospheres. To make significant progress in priority science as expressed in the National Research Council solar and space physics decadal survey and recent NASA Heliophysics roadmaps, identification of enabling new measurement techniques and technologies to be developed is required. Also, it is valuable to the community and future scientists and engineers to have a complete survey of the techniques and technologies used by the practitioners of solar and space physics. As with the 1995 conference and subsequent 1998 publication, it is incumbent on the community to identify those measurements that are particularly challenging and still require new techniques to be identified and tested to enable the necessary accuracy and resolution of certain parameters to be achieved. The following is a partial list of the measurement technique categories that are featured in these special publications: Particles; Thermal plasma to MeV energetic particles, neutral gas properties including winds, density, temperature, and composition, and enhanced neutral atom imaging; Fields; DC electric and magnetic fields, plasma waves, and electron drift instruments from which the plasma velocity information provides a measure of the DC electric field; Photons; Instruments sensitive from the near-infrared to X-rays; Contributions of techniques and technology for optical design, optical components, sensors, material selection for cameras, telescopes, and spectrographs; Ground based; Remote sensing methods for solar and geospace activity and space weather. The focus includes solar observatories, all-sky cameras, lidars, and ionosphere thermosphere mesosphere observatory systems such as radars, ionosondes, GPS receivers, magnetometers, conjugate observations, and airborne campaigns. The present volume collects together the papers for photons and ground-based categories. The companion volume collects together the papers for particles and fields categories. It is recognized that there are measurement techniques that overlap among the four categories. For example, use of microchannel plate detectors is used in photon and particle measurement techniques or the observation of visible photons and magnetic fields in space and on the ground share common technologies. Therefore, the reader should consider the entire collection of papers as they seek to understand particular applications. We hope that these volumes will be as valuable as a reference for our community as the earlier 1998 volumes have been.

Spann, James↗

Assessment of the Accuracy and Consistency of Cloud Property Retrievals from Passive Radiometers with Varying Spectral Information

Over the past few decades, space-based passive radiometers have been used to study the spatial distribution of clouds and some of their basic properties. Modern radiometers have significantly higher spatial resolution and collect more spectral information (i.e., have more spectral bands) than early instruments, and these advances have allowed researchers to characterize cloud physical and microphysical properties with greater detail. There is significant interest in utilizing as much of the existing satellite record as possible to study global and regional changes in cloud occurrence and distribution as well as the associated changes in reflected shortwave and outgoing longwave fluxes. Cloud property retrieval algorithms such as the NASA Satellite Cloud Optical and Radiative Property System (SatCORPS) have traditionally utilized as much spectral information as possible in order to maximize the accuracy of the retrievals. However, changes to the retrieval algorithm over time in order to take advantage of progressively more spectral information results in inconsistencies in cloud properties which in turn results in inconsistencies with products derived from these properties. It is not possible to implement modern state-of-the-art algorithms to earlier instruments which lack diverse spectral information, but many instruments since the early 2000s generally have approximately similar spectral bands in the visible (~0.65 microns), longwave infrared (~11 microns), and in many cases, the midwave infrared (~3.8 microns) and water vapor absorption (~6.7 microns), portions of the electromagnetic spectrum. Different versions of SatCORPS have been implemented with either the full set of spectral information collected by imagers such as GOES-16 and MODIS or with a reduced set of spectral bands in order to be more consistent with past imagers that lack such diverse spectral information. This study uses independent cloud property retrievals from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) to assess the accuracy of the retrievals (e.g., cloud fraction, thermodynamic phase, altitude) from the different retrieval methods and to demonstrate the advantages and disadvantages of using a reduced set of common spectral bands in order to achieve temporal and spatial consistency across different instruments.

Christopher R. Yost↗

ATLAS: Airborne Tunable Laser Absorption Spectrometer for stratospheric trace gas measurements

The ATLAS instrument is an advanced technology diode laser based absorption spectrometer designed specifically for stratospheric tracer studies. This technique was used in the acquisition of N2O tracer data sets on the Airborne Antarctic Ozone Experiment and the Airborne Arctic Stratospheric Expedition. These data sets have proved valuable for comparison with atmospheric models, as well as in assisting in the interpretation of the entire ensemble of chemical and meteorological data acquired on these two field studies. The N2O dynamical tracer data set analysis revealed several ramifications concerning the polar atmosphere: the N2O/NO(y) correlation, which is used as a tool to study denitrification in the polar vertex; the N2O Southern Hemisphere morphology, showing subsidence in the winter polar vortex; and the value of the N2O measurements in the interpretation of ClO, O3, and NO(y) measurements and of the derived dynamical tracer, potential vorticity. Field studies also led to improved characterization of the instrument and to improved accuracy.

Loewenstein, Max↗

Considerations for a Next Generation UV/Optical Space Telescope

During the past 25 years, a remarkable scientific revolution, has occurred in astrophysics as a result of convergence on two advancing fronts. First, instruments and telescopes have been developed to make sensitive measurements throughout the entire electromagnetic spectrum. Secondly, access to space has permitted observations above the obscuring and distorting "dirty window" of our atmosphere. Beginning around the middle of the next decade, a third major path - the availability of the permanently manned Space Station Freedom - will join with the earlier two capabilities, to not only continue this revolution, but to accelerate the quest for answers about the universe that have puzzled mankind for centuries. Beyond Earth-orbit, NASA is actively studying the possibility of a return to the Moon, which would provide a valuable platform for astrophysics observations during the next century. The studies discussed in this paper indicate that the technology requirements associated with the transportation to orbit and the assembly of these telescopes in orbit are major driving forces in the selection of generic design concepts. Ultimately, optical advances which are now becoming available through advanced manufacturing must be matched by technology advances in orbital operations, system modularization, and assembly by man and machine.

Nein, M. E.↗

Modifications of the X-ray source and monitor at the X-ray Calibration Facility

In order to test the instruments aboard the Advanced X-ray Astrophysics Facility (AXAF) some modifications will need to be made in the X-ray Calibration Facility at Marshall. Several of these modifications involve the X-ray source and the monitor. The source was redesigned to increase the spectral purity of the beam and decrease its polarization by minimizing the number of bremsstrahlung photons in the beam. This was accomplished by utilizing an annular electron gun which allowed the beam to take off antiparallel to the direction at which electrons are incident on the anode. Two other features of the source are the conical anode which decreases the effective spot size and a rotatable anode and filter wheel which allow the operator to change targets without breaking vacuum. The monitor is an important part of the facility because it is used to determine the X-ray flux at the target. A commercially available solid-state detector, Si(Li), should be used along with appropriate proportional counters for monitoring. This detector will be particularly useful when energy or wavelength dispersive instruments are tested because of its good resolution.

Newbolt, W. Barlow↗

Seismicity as a guide to global tectonics and earthquake prediction.

From seismicity studies, evidence is presented for several aspects of plate-tectonic theory, including ideas of sea-floor spreading, transform faulting and underthrusting of the lithosphere in island arcs. Recent advances in seismic instrumentation, the use of computers in earthquake location, and the installation of local networks of instruments are shown to have vastly increased the data available for seismicity studies. It is pointed out that most of the world's earthquakes are located in very narrow zones along active plate margins and are intimately related to global processes in an extremely coherent manner. Important areas of uncertainty calling for further studies are also pointed out.

Sykes, L. R.↗

A case study of technology transfer: Cardiology

Research advancements in cardiology instrumentation and techniques are summarized. Emphasis is placed upon the following techniques: (1) development of electrodes which show good skin compatibility and wearer comfort; (2) contourography - a real time display system for showing the results of EKGs; (3) detection of arteriosclerosis by digital computer processing of X-ray photos; (4) automated, noninvasive systems for blood pressure measurement; (5) ultrasonoscope - a noninvasive device for use in diagnosis of aortic, mitral, and tricuspid valve disease; and (6) rechargable cardiac pacemakers. The formation of a biomedical applications team which is an interdisciplinary team to bridge the gap between the developers and users of technology is described.

Schafer, G.↗

Study of alternative probe technologies

A number of implied technologies for a deep probe mission was examined; i.e., one that would provide the capability to scientifically examine planetary atmospheres at the 1000 bar level. Conditions imposed by current Jupiter, Saturn, and Uranus atmospheric models were considered. The major thrust of the measurements was to determine lower atmosphere composition, even to trace constituents of one part per billion. Two types of instruments having the necessary accuracy to meet the science objectives were considered and integrated into a deep probe configuration. One deep probe option that resulted was identified as a Minimum Technology Development approach. The significant feature of this option is that only three technology developments are required to enable the mission, i.e., (1) science instrument development, (2) advanced data processing, and (3) external high pressure/thermal insulation. It is concluded that a probe designed for a Jupiter mission could, with minor changes, be used for a Saturn or Uranus mission.

Source record↗

Influence of display and control compatibility on pilot-induced oscillations

The differences in techniques used by seven pilots to acquire information from an advanced display for instrument approaches to and landings on a runway were investigated. A fixed base simulator programmed with dynamics resembling the terminal configured vehicle (TCV) was studied. It is shown that the seven pilots can be divided into two groups which used the display with distinctly different strategies for controlling the airplane. A related pattern of performance differences resulted. It is found that pilots who primarily use raw flight path information experience longitudinal oscillations while pilots using attitude information did not.

Waller, M. C.↗

LANDSAT D to test thematic mapper, inaugurate operational system

NASA will launch the Landsat D spacecraft on July 9, 1982 aboard a new, up-rated Delta 3920 expendable launch vehicle. LANDSAT D will incorporate two highly sophisticated sensors; the flight proven multispectral scanner; and a new instrument expected to advance considerably the remote sensing capabilities of Earth resources satellites. The new sensor, the thematic mapper, provides data in seven spectral (light) bands with greatly improved spectral, spatial and radiometric resolution.

Source record↗

HIRS-AMTS satellite sounding system test - Theoretical and empirical vertical resolving power

The present investigation is concerned with the vertical resolving power of satellite-borne temperature sounding instruments. Information is presented on the capabilities of the High Resolution Infrared Radiation Sounder (HIRS) and a proposed sounding instrument called the Advanced Moisture and Temperature Sounder (AMTS). Two quite different methods for assessing the vertical resolving power of satellite sounders are discussed. The first is the theoretical method of Conrath (1972) which was patterned after the work of Backus and Gilbert (1968) The Backus-Gilbert-Conrath (BGC) approach includes a formalism for deriving a retrieval algorithm for optimizing the vertical resolving power. However, a retrieval algorithm constructed in the BGC optimal fashion is not necessarily optimal as far as actual temperature retrievals are concerned. Thus, an independent criterion for vertical resolving power is discussed. The criterion is based on actual retrievals of signal structure in the temperature field.

Thompson, O. E.↗

HIRS-AMTS satellite sounding system test - Vertical resolving power

The present investigation is concerned with the vertical resolving power of satellite borne temperature sounding instruments. Specifically, information is presented on the capabilities of the High Resolution Infra-red Radiation Sounder (HIRS) and a proposed sounding instrument called the Advanced Meteorological Temperature Sounder (AMTS). Two quite different methods for assessing the vertical resolving power of satellite sounders are discussed, taking into account the theoretical method of Conrath (1972), and an independent criterion for vertical resolving power which is based on actual retrievals of signal structure in the temperature field. Some discrepancies are found between theory and retrieval tests. The results indicate that the theoretical Backus and Gilbert spread function does not represent the shortest resolvable length scale for a retrieval system.

Thompson, O. E.↗

Earth remote sensing - 1970-1995

The past-achievements, current status, and future prospects of the Landsat terrestrial-remote-sensing satellite program are surveyed. Topics examined include the early history of space flight; the development of analysis techniques to interpret the multispectral images obtained by Landsats 1, 2, and 3; the characteristics of the advanced Landsat-4 Thematic Mapper; microwave scanning by Seasat and the Shuttle Imaging Radar; the usefulness of low-resolution AVHRR data from the NOAA satellites; improvements in Landsats 4 and 5 to permit tailoring of information to user needs; expansion and internationalization of the remote-sensing market in the late 1980s; and technological advances in both instrumentation and data-processing predicted by the 1990s.

Thome, P. G.↗

Mid-infrared spectroscopic investigation

Mid-infrared spectroscopic research efforts are discussed. The development of a new instrumentation to permit advanced measurements in the mid-infrared region of the spectrum, the development of a special library of well-characterized mineral and rock specimens for interpretation of remote sensing data, and cooperative measurements of the spectral signatures of analogues of materials that may be present on the surfaces of asteroids, planets or their Moons are discussed.

Salisbury, John W.↗

Passive microwave observations of thunderstorms from high-altitude aircraft

A high-altitude (20 km) aircraft made overflights of severe and nonsevere Midwest thunderstorms in the central and southeast U.S. during 2 separate experiments. Down-looking instruments on the aircraft are the imaging Multi-Channel Cloud Radiometer with channels in the visible, IR, and near IR, and two passive microwave instruments, the imaging Advanced Microwave Moisture Sounder at 92 (atmospheric window) and 183 GHz (centered on a water vapor line) and the 45 deg foward-of-nadir Multi-Channel Precipitation Radiometer at the 18 and 37 GHz window channels. Over land, the 92 GHz frequency distinguishes quite well the precipitating region from the nonprecipitating anvil region. The interpretation of the microwave measurements is complicated by differences in the cloud microphysics between different climatic regions.

Heymsfield, Gerald M.↗

Unsteady blade pressure measurements on a model counterrotation propeller

In an exploratory effort an advanced counterrotation propeller instrumented with blade-mounted pressure transducers was tested in the NASA Lewis 9- by 15-Foot Anechoic Wind Tunnel at a simulated takeoff and landing speed of Mach 0.20. The propeller's aft diameter was reduced to investigate possible noise reductions resulting from reduced blade row interaction with the tip vortex. The propeller was tested at three blade row spacings at fixed blade setting angles, at the maximum blade row spacing at higher blade setting angles and at propeller axis angles attack to the flow up to + or - 16 deg. A limited number of unsteady blade surface pressure measurements were made on both rotors of the model counterrotation propeller. Emphasis was placed on determining the effects of rotor-rotor interactions on the blade surface pressures. A unique method of processing the pressure signals was developed that enables even weak interaction waveforms and spectra to be separated from the total signal. The interaction on the aft rotor was many times stronger than that on the forward rotor. The fundamental rotor interaction tone exhibited complicated behavior but generally increased with rotational speed and blade setting angle and decreased with rotor spacing. With the propeller axis at an angle to the flow, the phase response of the aft rotor appeared to be significantly affected by the presence of the forward rotor.

Heidelberg, Laurence J.↗