Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIC IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Improved Oxygen-Beam Texturing of Glucose-Monitoring Optics

An improved method has been devised for using directed, hyperthermal beams of oxygen atoms and ions to impart desired textures to the tips of polymethylmethacrylate [PMMA] optical fibers to be used in monitoring the glucose content of blood. The improved method incorporates, but goes beyond, the method described in Texturing Blood-Glucose- Monitoring Optics Using Oxygen Beams (LEW-17642-1), NASA Tech Briefs, Vol. 29, No. 4 (April 2005), page 11a. The basic principle of operation of such a glucose-monitoring sensor is as follows: The textured surface of the optical fiber is coated with chemicals that interact with glucose in such a manner as to change the reflectance of the surface. Light is sent down the optical fiber and is reflected from, the textured surface. The resulting change in reflectance of the light is measured as an indication of the concentration of glucose. The required texture on the ends of the optical fibers is a landscape of microscopic cones or pillars having high aspect ratios (microscopic structures being taller than they are wide). The average distance between hills must be no more than about 5 mso that blood cells (which are wider) cannot enter the valleys between the hills, where they would interfere with optical sensing of glucose in the blood plasma. On the other hand, the plasma is required to enter the valleys, and high aspect ratio structures are needed to maximize the surface area in contact with the plasma, thereby making it possible to obtain a given level of optical glucose-measurement sensitivity with a relatively small volume of blood. There is an additional requirement that the hills be wide enough that a sufficient amount of light can propagate into them and, after reflection, can propagate out of them. The method described in the cited prior article produces a texture comprising cones and pillars that conform to the average-distance and aspect-ratio requirements. However, a significant fraction of the cones and pillars are so narrow that not enough light can propagate along them. The improved method makes it possible to form wider cones and pillars while still satisfying the average-distance and aspect-ratio requirements. In the improved method, as in the previously reported method, multiple optical fibers are first bundled together for simultaneous texturing of their distal tips. However, prior to texturing by exposure to an oxygen beam, the tips are first coated by vapor deposition of a thin, sparse layer of aluminum: The exposure to the aluminum vapor must be short enough (typically of the order of seconds) so that the aluminum nucleates into islands separated by uncoated areas. The coated tips are textured by exposure to a directed beam of hyperthermal (kinetic energy >1 eV) oxygen atoms and/or ions in a vacuum chamber, as in the previously reported method. The aluminum islands partially shield the underlying PMMA from oxidation and erosion by the beam, so that the cones or pillars remaining after texturing are wider than they would otherwise be. To some extent, the dimensions of the hills and the distances between them can be tailored through choice of the thickness of the aluminum coat and/or the oxygen-beam fluence. The figure illustrates an example of texturing of the tip of a PMMA optical fiber without and with prior aluminum coating.

Banks, Bruce A.↗
DOE OSTI2021

Effect of seawater as mixing water on the hydration behaviour of tricalcium aluminate

This study explored the mechanism of the effect of seawater on tricalcium aluminate (C{sub 3}A) hydration. The results showed that seawater retarded C{sub 3}A hydration and reduced the reaction degree of C{sub 3}A. The co-existence or ion pairing of Ca{sup 2+} and SO{sub 4}{sup 2−} onto the surface of C{sub 3}A poisoning the reactive sites is the main reason for this retardation. Besides, the precipitation of Mg(OH){sub 2} on the surface of C{sub 3}A would prolong the induction period for another 30 min and then consequently decrease the dissolution rate of C{sub 3}A hydration. Trace amounts of MgSO{sub 4}{sup 0} and Mg{sup 2+} present in the alkaline solution had little retardation effect. It was also found that Cl{sup −} would preferentially react with C{sub 3}A to form Friedel's salt, rather than forming hydroxy-AFm as that in the C{sub 3}A-deionized water paste. The direct formation of Friedel's salt resulted in an accumulation of Al{sup 3+} in solution, which would also hinder the subsequent dissolution of C{sub 3}A.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Measurements and calculations of 2 s – 2 p transitions in neonlike germanium: Achieving agreement at the 10 – 4 level

Calculations that achieve spectroscopic accuracy, i.e., at the level of 10 –4 or better, are rare and typically restricted to few-electron systems. Here we present high-resolution grating spectrometer measurements of 11 2s 1/2 – 2p 3/2 transitions in neonlike Ge 22+ that distinguish between two different implementations of the many-body perturbation theory (MBPT) method, including our own. The measurements show that our implementation of the MBPT method consistently achieves spectroscopic accuracy at the 10 –4 level for all of the measured lines. Moreover, our calculations improve the 10 –3 accuracy of prior MBPT calculations by an order of magnitude and allow us to make greatly improved predictions of the location of potential photopumped lines in Ge 22+ . Here, the measurements also improve on previous measurements of 2s 1/2 – 2p 3/2 transitions in fluorinelike Ge 23+ and oxygenlike Ge 24+ . Measurements of n = 2 to n = 3 transitions in Al 7+ , Al 8+ , and Al 9+ are used to support our measurement accuracy at the 10 –5 level.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Relativistic and correlation effects in the photoionization dynamics of oganesson ( Z = 118): Spin-orbit-interaction-activated interchannel coupling effects

High-Z atoms are excellent laboratories to study the combination of relativistic and many-electron correlation effects in electronic structure and dynamics. In the present work, the relativistic-random-phase approximation at different levels of truncation is employed to explore the final-state correlation effects in the photoelectron dynamics of the heaviest known element in the Periodic Table: oganesson (Og) with Z = 118. Here, the focus of this work is to illustrate the relativistic effects resulting from coupling different photoionization channels arising from spin-orbit split subshells, termed the spin-orbit-interaction-activated interchannel coupling effect. Comparison with the photoelectron dynamics of Rn on a qualitative level is also carried out, since Og is a homologue of Rn. The photoelectron dynamics of 7p, 7s, and 6d subshells are investigated and differences between Og and Rn, due to enhanced relativistic effects, are investigated.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Optical telecommunications-band clock based on neutral titanium atoms

Here, we propose an optical clock based on ultranarrow transitions in neutral titanium, which exhibit small blackbody radiation and quadratic Zeeman shifts and have wavelengths in the S-, C-, and L-telecommunications fiber bands, allowing for integration with robust laser technology. We calculate relevant properties using a high-precision relativistic hybrid method that combines configuration interaction and coupled-cluster approaches. To identify magic wavelengths, we have completed the largest-to-date direct dynamical polarizability calculations. Finally, we identify challenges that arise from magnetic dipole-dipole interactions and describe an approach to overcome them. A telecommunications-band atomic frequency standard will aid the deployment of optical clock networks and clock comparisons over long distances.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Using isotope shift for testing nuclear theory: The case of nobelium isotopes

We calculate field isotope shifts for nobelium atoms using nuclear charge distributions which come from different nuclear models.We demonstrate that comparing calculated isotope shifts with experiment can serve as a testing ground for nuclear theories. It also provides a way of extracting parameters of nuclear charge distribution beyond nuclear root mean square (rms) radius, e.g., parameter of quadrupole deformation β. The measurements of at least two atomic transitions is needed to disentangle the contributions of the changes in deformation and nuclear rms radius into field isotopic shift. We argue that a previous interpretation of the isotope measurements in terms of δ < r 2 > between 252,254 No isotopes should be amended when nuclear deformation is taken into account. As a result, we calculate isotope shifts for other known isotopes and for hypothetically metastable isotope 286 No for which the predictions of nuclear models differ substantially.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Kohn-Sham Density Functional Theory with Complex, Spin-Restricted Orbitals: Accessing a New Class of Densities without the Symmetry Dilemma

Here, we show that using complex, spin-restricted orbitals in Kohn-Sham (KS) density functional theory allows one to access a new class of densities that is not accessible by either spin-restricted (RKS) or spin-unrestricted (UKS) orbitals. We further show that the real part of a complex RKS (CRKS) density matrix can be nonidempotent when the imaginary part of the density matrix is not zero. Using CRKS orbitals shows significant improvements in the triplet-singlet gaps of a benchmark set, called TS12, for well-established, widely used density functionals. Moreover, it was shown that RKS and UKS yield qualitatively wrong charge densities and spin densities, respectively, leading to worse energetics. We demonstrate that representative modern density functionals show surprisingly no improvement even with a qualitatively more accurate density from CRKS orbitals. To this end, our work not only provides a way to escape the symmetry dilemma whenever there exists a CRKS solution, but also suggests a new route to design better approximate density functionals.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1984

Broadening of the Interplanetary Helium Cone Structure Due to Elastic Collisions of LISM Helium Atoms with Solar Wind Ions

Neutral interstellar particles penetrating into the heliosphere, besides being subject there to specific loss processes, suffer elastic collisions with KeV-solar wind ions. The momentum transfer to the neutrals connected with these collisions leads to a loss of angular momentum with respect to the Sun and to a fractional compensation of the effective solar gravity. The dynamical particle trajectories hence are changed into non-Keplerians leading to density and temperature distributions differing from those calculated in the past. This is found from a solution of the Boltzmann equation that linearizes the effect of this additional force. It is shown that the HeI-584A resonance glow of the heliospheric helium cone lead to substantially lower interstellar helium temperatures if re-interpreted on the basis of this revised theory. These temperatures now seem to be in accordance with the derived temperatures for interstellar hydrogen.

Fahr, H. J.↗
DOE OSTI2025

Deep potential molecular dynamics simulations of ion-enhanced etching of silicon by atomic chlorine

The continued development of plasma-assisted processing techniques requires a fundamental understanding of plasma-surface interactions. Molecular dynamics (MD) simulations have been employed to complement experimental studies and better understand the properties of such systems. Recently, machine learning (ML) methods have enabled the development of ab initio-based interatomic potentials, which can be generalized to complex combinations of multiple atom types. In this work, we use ML potentials developed using the Deep Potential Molecular Dynamics (DeepMD) framework to provide a model of ion-enhanced etching of Si by Cl atoms. We demonstrate the importance of proper selection of the training data set to the accuracy of the DeepMD model and compare our results to MD results using empirical potentials, as well as to experimental measurements. Exposure of undoped Si at 300 K to thermal Cl atoms yields a steady-state Cl coverage of 1.25 monolayers, which is slightly lower than the value obtained in previous experimental studies. Predictions of Si etch yields by simultaneous Cl atom and Ar + ion impacts as a function of ion energy, neutral to ion flux ratio, and angle of incidence of the ions are in reasonably good agreement with classical MD results and experimental measurements. Finally, etch yields and SiCl x mixed layer thicknesses during simultaneous bombardment of the Si(100) surface by Cl atoms and Cl + ions are in good agreement with experimental data. In conclusion, the present work is a necessary condition for the extension of the DeepMD procedure to more complex systems of interest in plasma-surface interactions.

Artificial neural networks↗
NASA NTRS2002

Laboratory Measurements of Charge Transfer on Atomic Hydrogen at Thermal Energies

We describe our ongoing program to measure velocity dependent charge transfer (CT) cross sections for selected ions on atomic hydrogen using the ion-aloin merged-beams apparatus at Oak Ridge Natioiial Laboralory. Our focus is on those ions for which CT plays an important role in determining the ionization structure, line emis sion, and thermal structure of observed cosmic photoionized plasmas.

Havener, C. C.↗
NASA NTRS1985

Empirical model of the composition of the Venus ionosphere Repeatable characteristics and key features not modeled

In-situ measurements of positive ion composition of the ionosphere of Venus are combined in an empirical model which is a key element for the Venus International Reference Atmosphere (VIRA) model. The ion data are obtained from the Pioneer Venus Orbiter Ion Mass Spectrometer (OIMS) which obtained daily measurements beginning in December 1978 and extending to July 1980 when the uncontrolled rise of satellite periapsis height precluded further measurements in the main body of the ionosphere. For this period, measurements of 12 ion species are sorted into altitude and local time bins with altitude extending from 150 to 1000 km. The model results exhibit the appreciable nightside ionosphere found at Venus, the dominance of atomic oxygen ions in the dayside upper ionosphere and the increase in prominence of atomic oxygen and deuterium ions on the nightside. Short term variations, such as the abrupt changes observed in the ionopause, cannot be represented in the model.

Taylor, H. A., Jr.↗
DOE OSTI2025

Half-life determination of heavy ions in a storage ring considering feeding and depleting background processes

Heavy-ion storage rings have relatively large momentum acceptance which allows for multiple ion species to circulate at the same time. This needs to be considered in radioactive decay measurements of highly charged ions, where atomic charge exchange reactions can significantly alter the intensities of parent and daughter ions. In this study, we investigate this effect using the decay curves of ion numbers in the recent 205 Tl 81+ bound-state beta decay experiment conducted using the Experimental Storage Ring at GSI Darmstadt. To understand the intricate dynamics of ion numbers, we present a set of differential equations that account for various atomic and nuclear reaction processes—bound state beta decay, atomic electron recombination and capture, and electron ionization. By incorporating appropriate boundary conditions, we develop a set of differential equations that accurately simulate the decay curves of various simultaneously stored ions in the storage ring: 205 Tl 81+ , 205 Pb 81+ , 205 Pb 82+ , 200 Hg 79+ , and 200 Hg 80+ . Through a quantitative comparison between simulations and experimental data, we provide insights into the detailed reaction mechanisms governing stored heavy ions within the storage ring. Our approach effectively models charge-changing processes, reduces the complexity of the experimental setup, and provides a simpler method for measuring the decay half-lives of highly charged ions in storage rings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Cluster Expansion Analysis of Atomic Order in Li-Ion Battery Cathode Material LiCo y Ni 1-y O 2

A modified cluster-expansion treatment was developed recently to analyze atomic order in LiCo y Ni 1-y O 2 , a model cathode material for Li-ion batteries. In this treatment, referred to as a “spin-atom” cluster expansion, the occupant of a lattice site is identified by its spin state as well as its atomic species. Further, Effective Cluster Interaction (ECI) coefficients are derived from a large training data set (i.e., the set of atomic arrangements for which DFT calculations are performed) which is filtered by an anomaly detection algorithm to eliminate poorly converged DFT calculations. The cluster expansion incorporates Li-Ni (LN) exchange as well as intralayer Co-Ni (CN) exchange. Monte Carlo simulations based on the cluster expansion were applied to the Ni-rich part of the phase diagram. The simulations predict a miscibility gap between y = 0.05 and y = 0.65.

25 ENERGY STORAGE↗
NASA NTRS1980

Heavy ions in Jupiter's environment

The extended atmosphere of the Jupiter system consists of atoms and ions of heavy elements. This material originates on the satellite Io. Energy is lost from the thermal plasma in collisionally excited optical and ultraviolet emission. The juxtaposition of Earth and spacecraft measurements provide insight concerning the underlying processes of particle transport and energy supply.

Brown, R. A.↗