Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATOMIC DISPLACEMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Phase stability and microstructure of neutron-irradiated substoichiometric yttrium dihydrides

The impact of the neutron-displacement damage on phase stability and microstructure of substoichiometric yttrium dihydrides (YH x , x <2) were investigated to assess their use as solid moderator in high-temperature nuclear reactors. YH x specimens were, thus, subjected to neutron irradiations in the range of 0.1–2 displacements per yttrium atom (dpa-Y) in the temperature range of 536–878°C at the Oak Ridge National Laboratory's (ORNL's) High Flux Isotope Reactor (HFIR). YH x specimens were initially prepared at stoichiometry (H/Y) ratios of 1.69 and 1.83. HFIR-irradiated specimens were characterized by variety of techniques to investigate H retention characteristics including dimensional analysis, optical microscopy, scanning electron microscopy electron back scatter diffraction (EBSD), transmission electron microscopy, thermal desorption spectroscopy (TDS), and high-energy x-ray diffraction (HE-XRD) characterizations. Overall, YH x exhibited notable structural and phase stability under short-term neutron-irradiation, except for the samples with significant silicon carbide (SiC) interaction at high doses and temperatures. Basic dimensional and mass measurements were misleading for accurate assessment of H retention, as confirmed by EBSD phase maps, XRD line profiles, and TDS signals. Thus, it was discussed that a robust H retention metric is needed to assess irradiated hydrides. Further, nanoscale cavities were observed as a result of the neutron irradiation in all samples. Although no clear impact of dose and irradiation temperature was determined, the initial H/Y ratio had an impact on the cavity number density where low H/Y specimens had high-resistance to cavity formation. The Y-vacancy cluster formation at the collision stage of the displacement cascade and their stabilization by H were considered to be the likely underlying mechanisms for the observed cavity microstructure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Strain‐Driven Stabilization of a Room‐Temperature Chiral Multiferroic with Coupled Ferroaxial and Ferroelectric Order

Noncollinear ferroic materials are sought after as testbeds to explore the intimate connections between topology and symmetry, which result in electronic, optical, and magnetic functionalities not observed in collinear ferroic materials. For example, ferroaxial materials have rotational structural distortions that break mirror symmetry and induce chirality. When ferroaxial order is coupled with ferroelectricity arising from a broken inversion symmetry, it offers the prospect of electric-field-control of the ferroaxial distortions and opens up new tunable functionalities. However, chiral multiferroics, especially ones stable at room temperature, are rare. A strain-stabilized, room-temperature chiral multiferroic phase in single crystals of BaTiS 3 is reported here. Using first-principles calculations, the stabilization of this multiferroic phase having P6 3 space group for biaxial tensile strains exceeding 1.5% applied on the basal ab-plane of the room temperature P6 3 cm phase of BaTiS 3 is predicted. The chiral multiferroic phase is characterized by rotational distortions of TiS 6 octahedra around the long c-axis and polar displacement of Ti atoms along the c-axis. Furthermore, the ferroaxial and ferroelectric distortions and their domains in P6 3 -BaTiS 3 are directly resolved using atomic resolution scanning transmission electron microscopy. Landau-based phenomenological modeling predicts a strong coupling between the ferroelectric and the ferroaxial order making P6 3 -BaTiS 3 an attractive test bed for achieving electric-field-control of chirality.

Chalcogenide↗
DOE OSTI2022

Hidden Local Symmetry Breaking in Silver Diamondoid Compounds is Root Cause of Ultralow Thermal Conductivity

Typically, conventional structure transitions occur from a low symmetry state to a higher symmetry state upon warming. In this work, an unexpected local symmetry breaking in the tetragonal diamondoid compound AgGaTe 2 is reported, which, upon warming, evolves continuously from an undistorted ground state to a locally distorted state while retaining average crystallographic symmetry. This is a rare phenomenon previously referred to as emphanisis. This distorted state, caused by the weak sd 3 orbital hybridization of tetrahedral Ag atoms, causes their displacement off the tetrahedron center and promotes a global distortion of the crystal structure resulting in strong acoustic–optical phonon scattering and an ultralow lattice thermal conductivity of 0.26 W m –1 K –1 at 850 K in AgGaTe 2 . Here, the findings explain the underlying reason for the unexpectedly low thermal conductivities of silver-based compounds compared to copper-based analogs and provide a guideline to suppressing heat transport in diamondoid and other materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Observation of Antiferroelectric Domain Walls in a Uniaxial Hyperferroelectric

Abstract Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies show that the configuration of ferroelectric walls can go well beyond the conventional Ising‐type structure. Néel‐, Bloch‐, and vortex‐like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, the discovery of antiferroelectric domain walls in the uniaxial ferroelectric Pb 5 Ge 3 O 11 is reported. Highly mobile domain walls with an alternating displacement of Pb atoms are resolved, resulting in a cyclic 180° flip of dipole direction within the wall. Density functional theory calculations show that Pb 5 Ge 3 O 11 is hyperferroelectric, allowing the system to overcome the depolarization fields that usually suppress the antiparallel ordering of dipoles along the longitudinal direction. Interestingly, the antiferroelectric walls observed under the electron beam are energetically more costly than basic head‐to‐head or tail‐to‐tail walls. The results suggest a new type of excited domain‐wall state, expanding previous studies on ferroelectric domain walls into the realm of antiferroic phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Iron surface corrosion in supercritical CO2 at atomic scale investigated by molecular dynamics simulations

Understanding the corrosion behavior of steels in supercritical carbon dioxide (S-CO2) is essential for ensuring the safe application of S-CO2 as a heat-transfer fluid in high-temperature energy systems, including advanced nuclear reactors. In this work, molecular dynamics (MD) simulations using ReaxFF potential are performed to explore the atomic-scale corrosion mechanisms of body-centered cubic iron (BCC-Fe) in S-CO2. The results show that CO2 molecules in S-CO2 decompose at the Fe surface, generating free C and O atoms that form Fe-C and Fe-O bonds and subsequently produce oxides and carbides. Concurrently, Fe atoms dissolve from the surface and diffuse into the S-CO2 region, resulting in interdiffusion of Fe, C and O atoms at the interface. The corrosion-layer thickness calculations show that high pressure and temperature induced by S-CO2 have stronger effects than surface orientation on the corrosion process. In addition, surface Fe atoms undergo substantial displacement under S-CO2 exposure, further accelerating corrosion. When a radiation-induced void is introduced near the Fe surface, the corrosion is enhanced. The void-matrix interface expands the reaction surface area and simultaneously induces corrosion reactions inside the bulk, resulting in a deeper penetration of C and O and thicker corrosion layers. All these results indicate that high-temperature, high-pressure and radiation-induced voids can seriously affect the corrosion of Fe in S-CO2, and must be considered to better use S-CO2 in nuclear facilities.

Li, Wenhua↗
DOE OSTI2023

Atomistic Simulations of Polydisperse Lignin Melts Using Simple Polydisperse Residue Input Generator

Understanding the physics of lignin will help rationalize its function in plant cell walls as well as aiding practical applications such as deriving biofuels and bioproducts. Here, in this work, we present SPRIG (Simple Polydisperse Residue Input Generator), a program for generating atomic-detail models of random polydisperse lignin copolymer melts i.e., the state most commonly found in nature. Using these models, we use all-atom molecular dynamics (MD) simulations to investigate the conformational and dynamic properties of polydisperse melts representative of switchgrass (Panicum virgatum L.) lignin. Polydispersity, branching and monolignol sequence are found to not affect the calculated glass transition temperature, T g . The Flory–Huggins scaling parameter for the segmental radius of gyration is 0.42 ± 0.02, indicating that the chains exhibit statistics that lie between a globular chain and an ideal Gaussian chain. Below T g the atomic mean squared displacements are independent of molecular weight. In contrast, above T g , they decrease with increasing molecular weight. Therefore, a monodisperse lignin melt is a good approximation to this polydisperse lignin when only static properties are probed, whereas the molecular weight distribution needs to be considered while analyzing lignin dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

An Unexpected Role of H During SiC Corrosion in Water

During aqueous corrosion, atoms in the solid react chemically with oxygen, leading either to the formation of an oxide film or to the dissolution of the host material. Commonly, the first step in corrosion involves an oxygen atom from the dissociated water that reacts with the surface atoms and breaks near-surface bonds. In contrast, hydrogen on the surface often functions as a passivating species. Here, we discovered that the roles of O and H are reversed in the early corrosion stages on a Si-terminated SiC surface. O forms stable species on the surface, and chemical attack occurs by H that breaks the Si–C bonds. Here, this so-called hydrogen scission reaction is enabled by a newly discovered metastable bridging hydroxyl group that can form during water dissociation. The Si atom that is displaced from the surface during water attack subsequently forms H 2 SiO 3 , which is a known precursor to the formation of silica and silicic acid. This study suggests that the roles of H and O in oxidation need to be reconsidered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing atom dynamics of excited Co-Mo-S nanocrystals in 3D

Advances in electron microscopy have enabled visualizations of the three-dimensional (3D) atom arrangements in nano-scale objects. The observations are, however, prone to electron-beam-induced object alterations, so tracking of single atoms in space and time becomes key to unravel inherent structures and properties. Here, we introduce an analytical approach to quantitatively account for atom dynamics in 3D atomic-resolution imaging. The approach is showcased for a Co-Mo-S nanocrystal by analysis of time-resolved in-line holograms achieving ~1.5 Å resolution in 3D. The analysis reveals a decay of phase image contrast towards the nanocrystal edges and meta-stable edge motifs with crystallographic dependence. These findings are explained by beam-stimulated vibrations that exceed Debye-Waller factors and cause chemical transformations at catalytically relevant edges. This ability to simultaneously probe atom vibrations and displacements enables a recovery of the pristine Co-Mo-S structure and establishes, in turn, a foundation to understand heterogeneous chemical functionality of nanostructures, surfaces and molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanical properties of freestanding few-layer graphene/boron nitride/polymer heterostacks investigated with local and non-local techniques

van der Waals two-dimensional materials and heterostructures combined with polymer films continue to attract research attention to elucidate their functionality and potential applications. This study presents the fabrication and mechanical testing of 2D material heterostacks, consisting of few-layer boron nitride and graphene heterostructures synthesized via chemical vapor deposition, capped with a polymethyl methacrylate layer and suspended across ∼200 μm wide trenches using a combined wet–dry transfer method. The mechanical characterization of the heterostacks was performed using two independent approaches: (a) non-local testing with a custom-built tensile testing platform and (b) local load–displacement testing employing atomic force microscopy probes, complemented by finite element simulations. Both approaches provided new results, which are in good agreement with each other. Overall, our findings offer new insights into a combined load capacity in complex multi-material two-dimensional systems, and can contribute to advancing micro and nano-scale device designs and implementations.

Lespasio, Marcus↗
DOE OSTI2026

Adsorption of CO on gold: effect of coverage and surface deformations

Recent insights into the nature of catalysts under reactive conditions have motivated investigating heterogeneously catalyzed reactions with non-rigid surfaces. As an example system to revisit, CO interactions with gold have been a longstanding system of interest due to its structure sensitivity. In this work, we investigate coverage-dependent CO adsorption trends on terraces, steps, and kinks. Calculating differential binding energy and mean absolute displacement of the atomic structures as a function of CO coverage, we propose a deformation quenching mechanism that partially determines CO saturation coverage. Extending this analysis to consider CO partial pressure, we show a phase change in CO step occupation, which we highlight as a possible explanation for previously reported temperature-programmed desorption and Fourier-transform infrared reflection-absorption spectroscopy measurements. Furthermore, this work shows how adopting a non-rigid surface model can lead to additional insights which may be applied to other heterogeneously catalyzed systems.

Kavalsky, Lance [University of Wisconsin-Madison, ↗
DOE OSTI2023

DEHP− extractant binding to trivalent lanthanide Er3+: Fast binding accompanied by concerted angular motions of hydration water

Solvent extraction of trivalent rare earth metal ions by organophosphorus extractants proceeds via binding of phosphoric acid headgroups to the metal ion. Water molecules in the tightly bound first hydration shell of the metal ions must be displaced by oxygen atoms from phosphoric acid headgroups. Here, we use classical molecular dynamics simulations to explore the event in which a fully hydrated Er3+ binds to its first phosphoric acid headgroup. Approach of the headgroup into the region between the first and second hydration shells leads to a fast ejection of a water molecule that is accompanied by reordering of the hydration water molecules, including discretization of their angular positions and collective rotation about the metal ion. The water molecule ejected from the first shell is located diametrically opposite from the binding oxygen. Headgroup binding places a headgroup oxygen closer to Er3+ than its first hydration shell and creates a loosely bound water that subsequently exchanges between the first shell and its environment. This second exchange of water also occurs at discrete angular positions. This geometrical aspect of binding may be of relevance to understanding the binding and transport of ion–extractant complexes that are expected to occur at the organic–aqueous liquid–liquid interface used in solvent extraction processes.

Chemistry↗
DOE OSTI2020

Characterization of Radiation Effects and Ion Tracks with Spallation Neutron Probes

Swift heavy ions are typically defined as high-mass charged particles of kinetic energy above ~1 MeV per nucleon (MeV/u). In this regime, the energy deposition of the ions is dominated by electronic stopping, and each individual ion may induce a linear trail of damage with a width of a few nanometers and a length of several tens of micrometers or more. During the last decade, ion tracks and other radiation effects induced by swift heavy ions have been studied in a wide range of materials for basic research, as well as for a wide variety of applications. The interactions of swift heavy ions with matter are significantly different from those induced by lower energy ions (keV-MeV), where atoms are directly displaced from their lattice sites via elastic collisions. In contrast, swift ions (MeV-GeV) transfer their kinetic energy to the electrons of the target, inducing ionization and initiating a cascade of secondary electrons that quickly spreads radially. The extremely high energy densities (up to tens of eV/atom) along the ion path lead to a confined plasma-like state that is dissipated through electron–phonon coupling to the lattice. Further, subsequent rapid transitions through equilibrium and non-equilibrium states trigger complex structural modifications within a highly localized nanoscale damage zone, forming ion tracks in materials ion tracks.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Low-frequency Raman active modes of twisted bilayer MoS 2

Abstract We study the low-frequency Raman active modes of twisted bilayer MoS 2 for several twist angles using a force-field approach and a parametrized bond polarizability model. We show that twist angles near high-symmetry stacking configurations exhibit stacking frustration that leads to significant buckling of the moiré superlattice. We find that atomic relaxation due to the twist is of prime importance. The periodic displacement of the Mo atoms shows the realization of a soliton network, and in turn, leads to the emergence of a number of frequency modes not seen in the high-symmetry stacking systems. Some of the modes are only seen in the XZ Raman polarization setup while others are seen in the XY setup. The symmetry of the normal modes, and how this affects the Raman tensors is examined in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Revealing Defect-Seeded and Interfacial Generation Mechanisms of Photoinduced Coherent Phonons with 4D Ultrafast Electron Microscopy

Ultrafast photoexcitation of coherent phonons is driven by an impulsive, collective displacement of constituent atoms from their average equilibrium lattice positions [1]. Models describing the generation of coherent acoustic modes typically invoke the creation of an anisotropic strain profile arising from the relatively instantaneous absorption of an ultrafast laser pulse [2]. If the skin depth is shallow relative to the specimen thickness, a steep tensile strain gradient perpendicular to the surface ($\frac{∂ε}{∂z}$) results. Initial relaxation occurs via rapid contraction of the surface layers followed by subsequent coherent oscillations of the lattice and launch of a train of coherent elastic strain waves [i.e., coherent acoustic phonons (CAPs)]. Macroscopically, responses are generally well-described by constitutive relations as gleaned from data gathered using ultrasonic methods or ultrafast spectroscopies. Furthermore, at the atomic to nanoscale level, individual lattice discontinuities and their impact on CAP behaviors can be modeled using multiscale methods [3,4]. Further, average unit-cell level responses on ultrafast timescales can be probed using femtosecond electron and X-ray scattering [5,6].

Flannigan, David J. [University of Minnesota, Minn↗
DOE OSTI2022

Ab initio self-consistent many-body theory of polarons at all couplings

We present a theoretical framework to describe polarons from first principles within a many-body Green’s function formalism. Starting from a general electron-phonon Hamiltonian, we derive a self-consistent Dyson equation in which the phonon-mediated self-energy is composed by two distinct terms. One term is the Fan-Migdal self-energy and describes dynamic electron-phonon processes, the other term is a contribution to the self-energy originating from the static displacements of the atomic nuclei in the polaronic ground state. The lowest-order approximation to the present theory yields the standard many-body perturbation theory approach to electron-phonon interactions in the limit of large polarons, and the ab initio polaron equations introduced in the limit of small polarons. Here, a practical recipe to implement the present unifying formalism in first-principles calculations is outlined. We apply our method to the Fröhlich model, and obtain remarkably accurate polaron energies at all couplings, in line with Feynman’s polaron theory and diagrammatic Monte Carlo calculations. We also recover the well-known results of Fröhlich and Pekar at weak and strong coupling, respectively. The present approach enables predictive many-body calculations of polarons in real materials at all couplings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Symmetry-mode analysis for local structure investigations using pair distribution function data

Symmetry-adapted distortion modes provide a natural way of describing distorted structures derived from higher-symmetry parent phases. Structural refinements using symmetry-mode amplitudes as fit variables have been used for at least ten years in Rietveld refinements of the average crystal structure from diffraction data; more recently, this approach has also been used for investigations of the local structure using real-space pair distribution function (PDF) data. Here, the value of performing symmetry-mode fits to PDF data is further demonstrated through the successful application of this method to two topical materials: TiSe2, where a subtle but long-range structural distortion driven by the formation of a charge-density wave is detected, and MnTe, where a large but highly localized structural distortion is characterized in terms of symmetry-lowering displacements of the Te atoms. Here, the analysis is performed using fully open-source code within the DiffPy framework via two packages developed for this work: isopydistort, which provides a scriptable interface to the ISODISTORT web application for group theoretical calculations, and isopytools, which converts the ISODISTORT output into a DiffPy-compatible format for subsequent fitting and analysis. These developments expand the potential impact of symmetry-adapted PDF analysis by enabling high-throughput analysis and removing the need for any commercial software.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Critical Role of Sc Substitution in Modulating Ferroelectricity in Multiferroic LuFeO 3

Understanding how individual dopants or substitutional atoms interact with host lattices enables us to manipulate, control, and improve the functionality of materials. However, because of the intimate coupling among various degrees of freedom in multiferroics, the atomic-scale influence of individual foreign atoms has remained elusive. Here, we unravel the critical roles of individual Sc substitutional atoms in modulating ferroelectricity at the atomic scale of typical multiferroics, Lu 1–x Sc x FeO 3 , by combining advanced microscopy and theoretical studies. Atomic variations in polar displacement of intriguing topological vortex domains stabilized by Sc substitution are directly correlated with Sc atom-mediated local chemical and electronic fluctuations. The local FeO 5 trimerization magnitude and Lu/Sc–O hybridization strength are found to be significantly reinforced by Sc, clarifying the origin of the strong dependence of improper ferroelectricity on Sc content. We find that this study could pave the way for correlating dopant-regulated atomic-scale local structures with global properties to engineer emergent functionalities of numerous chemically doped functional materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗