Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Photocatalytic degradation of gaseous toluene over hollow “spindle-like” α-Fe{sub 2}O{sub 3} loaded with Ag

Highlights: ► Hollow α-Fe{sub 2}O{sub 3} spindle-shaped microparticles were prepared for Ag support. ► The hollow α-Fe{sub 2}O{sub 3} and Ag/α-Fe{sub 2}O{sub 3} materials were used to degrade gaseous toluene. ► Complete degradation of toluene occurred on the Ag/α-Fe{sub 2}O{sub 3} surface. -- Abstract: In this work, hollow “spindle-like” α-Fe{sub 2}O{sub 3} nanoparticles were synthesized by a hydrothermal route. The Ag/α-Fe{sub 2}O{sub 3} catalyst was prepared based on the spindle-shaped α-Fe{sub 2}O{sub 3} with CTAB as the surfactant, which showed excellent photoelectric property and photocatalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction, scanning electronic microscopy, transmission electronic microscopy, energy-dispersive X-ray spectra, and UV–Vis diffuse reflectance spectroscopy techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage measurement. The photocatalytic performances of the Ag/α-Fe{sub 2}O{sub 3} and α-Fe{sub 2}O{sub 3} samples were comparatively studied in the degradation of toluene under xenon lamp irradiation by in situ FTIR spectroscopy. Benzaldehyde and benzoic acid species could be observed on the α-Fe{sub 2}O{sub 3} surface rather than Ag/α-Fe{sub 2}O{sub 3} surface. The results indicate that the Ag/α-Fe{sub 2}O{sub 3} sample exhibited higher photocatalytic efficiency.

36 MATERIALS SCIENCE↗

Preparation of graphene–Ag composites and their application for electrochemical detection of chloride

Highlights: ► Graphene–Ag composites were prepared in situ using ascorbic acid as green reducing agent. ► The morphology of Ag particles was irregular sheet and Ag particles homogeneously distributed on the graphene matrix. ► The surface-enhanced Raman scattering enhancement factor of D band is 5.85 for composites. ► The composites exhibited good sensitivity for the detection of chloride ions. -- Abstract: Graphene–Ag composites were prepared in situ using ascorbic acid as green reducing agent. The composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electronic diffraction (SAED), and Raman spectrometer. It was showed that Ag particles homogeneously distributed on the graphene matrix. The morphology of Ag particles was irregular sheet with (1 1 1) basal plane. The surface-enhanced Raman scattering (SERS) enhancement factor of D band is 5.85 for composites. The application of the composites for electrochemical detection of chloride was studied by cyclic voltammetry. The composites exhibited good sensitivity for the detection of chloride ions. The maximum peak current of cyclic voltammetry curve in 5 mM KCl was 0.80 mA. In the range of 500 μM to 50 mM for Cl{sup −}, the current response was proportional and linear to the Cl{sup −} concentration. The sensitivity to the detection for Cl{sup −} was 0.059 (mA/mM) and the detection limit was 61 μM for Cl{sup −}. It indicates graphene–Ag composites would be a competitive material for detection of halide.

36 MATERIALS SCIENCE↗

Remarkable modulation effects of Ag{sup +} ion on fluorescence of Eu{sup 3+} ion doped yttrium phosphate nanophosphors

Highlights: ► Ag{sup +} sensitized YPO{sub 4}:Eu{sup 3+} was synthesized. ► Emission band centered at 612 nm was broadened to 14 nm. ► Ag{sup +} plays a main role for the broadening of emission band of Eu{sup 3+}. ► Emission mechanisms were discussed. - Abstract: Ag{sup +} sensitized YPO{sub 4}:Eu{sup 3+} nanomaterials were successfully synthesized by hydrothermal reaction. The fluorescent spectra indicate that Ag{sup +} ion has remarkable modulation effects on the shape of the emission bands of YPO{sub 4}:Eu{sup 3+}, so that full width at half maximum (FWHM) of the {sup 5}D{sub 0} → {sup 7}F{sub 2} emission of YPO{sub 4}:Eu{sup 3+} is extended to be 14 nm, broader than that (<9 nm) of ever reported Eu{sup 3+}-doped materials. Meanwhile, it is observed that the doping of Ag+ ion leads to the lowering of the intensity ratio of {sup 5}D{sub 0} → {sup 7}F{sub 2} to {sup 5}D{sub 0} → {sup 7}F{sub 1} transition. The analysis demonstrates that doping of Ag{sup +} ion will generate the local lattice aberration and the crystal field variation of Eu{sup 3+} ion and Y{sup 3+} ions due to a fact that the ionic radius (1.31 Å) of Ag{sup +} is obviously larger than that (0.938 Å) of Eu{sup 3+} and that (0.90 Å) of Y{sup 3+}. As a result, the excitation and emission bands of Eu{sup 3+} ion are correspondingly tuned.

36 MATERIALS SCIENCE↗

Graphene oxide wrapped Ag{sub 3}PO{sub 4} sub-microparticles with highly enhanced photocatalytic activity and stability under visible light irradiation

Highlights: • Graphene oxide wrapped Ag{sub 3}PO{sub 4} sub-microparticles were prepared. • The photocatalytic activity of Ag{sub 3}PO{sub 4} is increased by 6 times by GO wrapping. • The hybrid photocatalysts exhibited excellent stability. - Abstract: Graphene oxide (GO) wrapped Ag{sub 3}PO{sub 4} sub-microparticles were prepared by in situ deposition–precipitation method. By hybridization of Ag{sub 3}PO{sub 4} with GO nanosheets, a 6-fold enhancement in the photodegradation rate toward orange methyl (MO) under visible light irradiation (λ ≥ 420 nm) was observed compared with the pure Ag{sub 3}PO{sub 4} sub-microsparticles. The hybrid photocatalysts also exhibited excellent stability in the successive MO degradation experiments. The highly enhanced photocatalytic activity and stability were mainly attributed to the quick transfer of the photogenerated electrons from Ag{sub 3}PO{sub 4} to GO nanosheets, which could effectively suppress the electron–hole pairs recombination and thus inhibit the photocorrosion of Ag{sub 3}PO{sub 4}. These high-efficient and stable hybrid photocatalysts were expected to show considerable potential applications in wastewater treatment and water splitting.

36 MATERIALS SCIENCE↗

Facile synthesis of Ag–Cu{sub 2}O composites with enhanced photocatalytic activity

Highlights: • Ag–Cu{sub 2}O nanocomposites were synthesized via awet-chemical precipitation route. • The growth temperature does not exceed 50 °C in any step of the synthesis. • Enhanced photocurrent of Ag–Cu{sub 2}O composites, compared to pure Cu{sub 2}O particles. • The photocatalytic property was studied upon simulated sunlight. • Enhanced photocatalytic property of Ag–Cu{sub 2}O composites, compared to pure Cu{sub 2}O particles. - Abstract: Silver–cuprous oxide (Ag–Cu{sub 2}O) microcomposites are successfully prepared by a facile low-cost solution method. The obtained materials were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), ultraviolet–visible (UV–vis) spectroscopy, X-ray photoelectron spectroscopy (XPS). Experiments demonstrated that the formation of Ag–Cu{sub 2}O microcomposites was significantly influenced by the concentration of AgNO{sub 3}, and with increasing the concentration of AgNO{sub 3}, the optical absorption of the composites becomes strong. The photocatalytic activity of the prepared Ag–Cu{sub 2}O composites was determined by measuring the degradation of methyl orange solution under visible light, to find out its potential application in waste water treatment. The results reveal that the photocurrent of the composite is about 4 times higher than that of pure Cu{sub 2}O and the visible light photocatalytic activity of the composite is enhanced greatly on degradation of methyl orange. The reason for improvement in photocatalytic activity of the Ag–Cu{sub 2}O composites was also discussed.

36 MATERIALS SCIENCE↗

Light-dependent controlled synthesis and photocatalytic properties of stable Ag{sub 3} nanocrystals

The silver phosphate (Ag{sub 3}PO{sub 4}) is applied in organic matter photodegradation as a novel catalyst materials, however, its instability reduces the photocatalytic life and limits its further applications. In this work, a series of Ag{sub 3}PO{sub 4} crystalline nanoparticle clusters have been synthesized by a photocontrol method. By comparing their sunlight photocatalytic properties, the Ag{sub 3}PO{sub 4} nanoparticles with dominant (2 2 0) facets have a lower surface energy (1.05 J m{sup −2}) than existing Ag{sub 3}PO{sub 4} crystals which can offer a longer catalyst service life. The photodegradation rate of the Ag{sub 3}PO{sub 4} nanoparticles is about 3 times that of common Ag{sub 3}PO{sub 4} bulk materials and the sunlight is used as the power source instead of high cost artificial visible light sources in this catalytic system. An effective continuous photodegradation reactor using Ag{sub 3}PO{sub 4} nanoparticles is successfully fabricated to degrade rhodamine B solution. At the same time, this work provides an example for how oxidation photocatalyst works without extra adding sacrificial reagent.

36 MATERIALS SCIENCE↗

Facile formation of Ag{sub 2}WO{sub 4}/AgX (X = Cl, Br, I) hybrid nanorods with enhanced visible-light-driven photoelectrochemical properties

Highlights: • Ag{sub 2}WO{sub 4}/AgX hybrid nanorods were prepared by a facile in-situ anion exchange reaction. • Ag{sub 2}WO{sub 4} nanorods and different X{sup −} ions were reacted in water at room temperature. • The hybrids possess significantly enhanced photoelectrochemical properties. • Ag{sub 2}WO{sub 4}/AgBr hybrids exhibit the highest photocatalytic activity among three samples. • The active species tests were also investigated to confirm photocatalytic mechanism. - Abstract: In this work, we demonstrated a general strategy for the preparation of a series of uniform Ag{sub 2}WO{sub 4}/AgX (X = Cl, Br, I) hybrid nanorods by a facile in-situ anion exchange reaction occurring at room temperature between pregrown Ag{sub 2}WO{sub 4} nanorods and different X{sup −} ions in water. Compared with Ag{sub 2}WO{sub 4} nanorods, further investigation has revealed that the as-prepared hybrid nanorods possess significantly enhanced photocurrent response and photocatalytic activity in degrading methyl orange (MO) under visible-light irradiation. In particular, the Ag{sub 2}WO{sub 4}/AgBr hybrid nanorods exhibit the highest photocatalytic activity among the three kinds of samples. The active species tests indicate that superoxide anion radicals and photogenerated holes are responsible for the enhanced photocatalytic performance.

36 MATERIALS SCIENCE↗

One-pot synthesis of silica-hybridized Ag{sub 2}S–CuS nanocomposites with tunable nonlinear optical properties

Highlights: • Silica modified QDs of CuS and Ag{sub 2}S is developed at room temperature. • Formation of Ag{sub 2}S/CuS nanocomposites is confirmed from XRD and FFT of HRTEM images. • The concentration dependent growth of silica modified QDs is discussed. • Nonlinear absorption observed in ns excitations is dominated by SA and ESA. • Tuning of optical limiting efficiency is achieved with relative Ag{sub 2}S content. - Abstract: In the present work we report a simple, facile route developed for preparing silica hybridized copper sulfide and silver sulfide quantum dots at room temperature. By adjusting the concentration of the precursors, Ag{sub 2}S can form Ag{sub 2}S–CuS nanocomposites which are self regulated in one pot. Their crystalline, structural and optical properties have been investigated in detail, and the optical limiting nature is studied from fluence-dependent transmittance measurements employing short (5 ns) laser pulses at 532 nm. Ag{sub 2}S nanoparticles are found to have large third order nonlinear optical coefficients with a relatively lower optical limiting threshold of 1.7 J cm{sup −2}, while the nonlinearity of the nanocomposites is found to lie in between that of Ag{sub 2}S and CuS nanoparticles. These results suggest pathways for designing good quality optical limiters with tunable optical limiting efficiencies by varying the constituent nanocrystal compositions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile sonochemical synthesis of Ag modified Bi{sub 4}Ti{sub 3}O{sub 12} nanoparticles with enhanced photocatalytic activity under visible light

Highlights: • Ag doped/dispersed Bi{sub 4}Ti{sub 3}O{sub 12} nanoparticles synthesized sonochemically. • Undoped Bi{sub 4}Ti{sub 3}O{sub 12} exhibited 100% RhB degradation in 45 min under UV light. • Under visible light 100% RhB degradation occured with Bi{sub 4}Ti{sub 3}O{sub 12} in 150 min. • Improved photodegradation of RhB by Ag doped Bi{sub 4}Ti{sub 3}O{sub 12} in visible light. • The Bi{sub 4}Ti{sub 3}O{sub 12}:Ag(5%) sample photodegrades RhB from wastewater under sunlight. - Abstract: Unmodified and Ag modified Bi{sub 4}Ti{sub 3}O{sub 12}:Ag(x%) (x = 2 and 5) nanoparticles have been synthesized sonochemically and characterized using X-ray diffraction, X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersion X-ray spectrum (EDS) analysis, transmission electron microscopy (TEM) and UV–vis diffuse reflectance spectroscopy. In the presence of unmodified Bi{sub 4}Ti{sub 3}O{sub 12} nanoparticles, complete photocatalytic degradation of Rhodamine B (RhB) was observed under UV light within 45 min. However, the response of this material for photodegradation of RhB under visible light was poor and could be greatly enhanced with Ag modification. A possible mechanism for this observation has been discussed in detail. The reusability of the material has also been tested and it has been found to have favorable recycling capability. Moreover, the Ag- modified Bi{sub 4}Ti{sub 3}O{sub 12} has been tested for RhB degradation from a wastewater sample under sunlight and promising results have been obtained.

36 MATERIALS SCIENCE↗

Nanocoral Ag for nonenzymatic glucose detection at extremely low operational potential

Silver (Ag) metal has excellent antibacterial properties, which makes it an ideal candidate for nonenzymatic glucose sensing devices. However, Ag nonenzymatic glucose sensors function at significantly high operating potential and suffer from poor selectivity. Here, we report that nanocoral reduced Ag (R-Ag) based nonenzymatic glucose sensors can be operated at potential as low as 0.1 V vs. Ag/AgCl and exhibits more than one order magnitude higher sensitivity in comparison to the Ag film. The R-Ag sensors can detect glucose in a wide range of concentrations varying from 100 u M to 2.5 mM linearly. Finally, the R-Ag sensors are also very robust, as performance remains unchanged even if sensors are stored under ambient conditions for 45 days.

36 MATERIALS SCIENCE↗

Investigating the Effects of Ag, Cu, and Pd Functionalized Chabazite on the Adsorption Affinities of Noble Gases Xe, Kr, and Ar

Separation of the noble gases from air is typically done through a cryogenic distillation process that is both energy intensive and expensive. Notably, Ag-functionalized zeolites and MOFs have a well-documented affinity for Xe and, to a lesser extent, Kr that could serve as an economical alternative to this process on a commercial scale. The mechanism driving the Ag–Xe interaction, however, is still a matter of debate, and the use of other metals in place of Ag is not as thoroughly documented. In this study, Ag, Cu, and Pd functionalized chabazite specimens were prepared, and their affinities for the noble gases Xe, Kr, and Ar were investigated and compared to each other and an unexchanged Na-chabazite. From these analyses, Ag-functionalized chabazite displayed the highest affinity for Xe among these samples, but there was not a similar affinity for Kr or Ar. From the results, a mechanism is proposed such that the strong Ag–Xe interaction contains both an underlying physical and electronic aspect related to the formation of Ag nanoclusters within the chabazite pore geometry that alters the chabazite surface state such that Xe is preferentially adsorbed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous Shape Evolution of Ag 2 O 2 Nanocrystals Modulated by Surface Adsorbates during Electron Beam Etching

An understanding of nanocrystal shape evolution is significant for the design, synthesis, and applications of nanocrystals with surface-enhanced properties such as catalysis or plasmonics. Surface adsorbates that are selectively attached to certain facets may strongly affect the atomic pathways of nanocrystal shape development. However, it is a great challenge to directly observe such dynamic processes in situ with a high spatial resolution. In this work, we report the anomalous shape evolution of Ag 2 O 2 nanocrystals modulated by the surface adsorbates of Ag clusters during electron beam etching, which is revealed through in situ transmission electron microscopy (TEM). In contrast to the Ag 2 O 2 nanocrystals without adsorbates, which display the near-equilibrium shape throughout the etching process, Ag 2 O 2 nanocrystals with Ag surface adsorbates show distinct facet development during etching by electron beam irradiation. Three stages of shape changes are observed: a sphere-to-a cube transformation, side etching of a cuboid, and bottom etching underneath the surface adsorbates. We find that the Ag adsorbates modify the Ag 2 O 2 nanocrystal surface configuration by selectively capping the junction between two neighboring facets. They prevent the edge atoms from being etched away and block the diffusion path of surface atoms. Finally, our findings provide critical insights into the modulatory function of surface adsorbates on the shape control of nanocrystals.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High Thermoelectric Performance in Chalcopyrite Cu 1-x Ag x GaTe 2 –ZnTe: Nontrivial Band Structure and Dynamic Doping Effect

The understanding of thermoelectric properties of ternary I–III–VI 2 type (I = Cu, Ag; III = Ga, In; and VI = Te) chalcopyrites is less well developed. Although their thermal transport properties are relatively well studied, the relationship between the electronic band structure and charge transport properties of chalcopyrites has been rarely discussed. In this study, we reveal the unusual electronic band structure and the dynamic doping effect that could underpin the promising thermoelectric properties of Cu 1–x Ag x GaTe 2 compounds. Density functional theory (DFT) calculations and electronic transport measurements suggest that the Cu 1–x Ag x GaTe 2 compounds possess an unusual non-parabolic band structure, which is important for obtaining a high Seebeck coefficient. Moreover, a mid-gap impurity level was also observed in Cu 1–x Ag x GaTe 2 , which leads to a strong temperature-dependent carrier concentration and is able to regulate the carrier density at the optimized value for a wide temperature region and thus is beneficial to obtaining the high power factor and high average ZT of Cu 1–x Ag x GaTe 2 compounds. We also demonstrate a great improvement in the thermoelectric performance of Cu 1–x Ag x GaTe 2 by introducing Cu vacancies and ZnTe alloying. The Cu vacancies are effective in increasing the hole density and the electrical conductivity, while ZnTe alloying reduces the thermal conductivity. As a result, a maximum ZT of 1.43 at 850 K and a record-high average ZT of 0.81 for the Cu 0.68 Ag 0.3 GaTe 2 –0.5%ZnTe compound are achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Achieving Ultra-High Selectivity to Hydrogen Production from Formic Acid on Pd–Ag Alloys

Palladium-silver based alloy catalysts have a great potential for CO-free hydrogen production from formic acid for fuel cell applications. However, the structural factors affecting the selectivity of formic acid decomposition is still debated. Herein, the decomposition pathways of formic acid on Pd-Ag alloys with different atomic configurations have been investigated to identify the alloy structures yielding high H 2 selectively. Several Pd x Ag 1-x surface alloys with various compositions were generated on a Pd(111) single crystal; their atomic distribution and electronic structure were determined by a combination of infrared reflection absorption spectroscopy (IRAS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). It was established that the Ag atoms with Pd neighbors are electronically altered, and the degree of alteration correlates with the number of nearest Pd. Temperature programmed reaction spectroscopy (TPRS) and DFT demonstrated that the electronically altered Ag domains create a new reaction pathway that selectively dehydrogenates formic acid. In contrast, Pd monomers surrounded by Ag are demonstrated to have a similar reactivity compared to pristine Pd(111), yielding CO and H 2 O in addition to the dehydrogenation products. Furthermore, they bind to the produced CO weaker than pristine Pd, demonstrating an enhancement in resistance to CO poisoning. This work therefore shows that surface Ag domains modified by interaction with subsurface Pd are the key active sites for selective decomposition of formic acid, while surface Pd atoms are detrimental for selectivity. Hence the decomposition pathways can be tailored for CO-free H 2 production on Pd-Ag alloy systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent heteroepitaxial growth of I-III-VI 2 Ag(In,Ga)S 2 colloidal nanocrystals with near-unity quantum yield for use in luminescent solar concentrators

Colloidal Ag(In,Ga)S 2 nanocrystals (AIGS NCs) with the band gap tunability by their size and composition within visible range have garnered surging interest. High absorption cross-section and narrow emission linewidth of AIGS NCs make them ideally suited to address the challenges of Cd-free NCs in wide-ranging photonic applications. However, AIGS NCs have shown relatively underwhelming photoluminescence quantum yield (PL QY) to date, primarily because coherent heteroepitaxy has not been realized. Here, we report the heteroepitaxy for AIGS-AgGaS 2 (AIGS-AGS) core-shell NCs bearing near-unity PL QYs in almost full visible range (460 to 620 nm) and enhanced photochemical stability. Key to the successful growth of AIGS-AGS NCs is the use of the Ag-S-Ga(OA) 2 complex, which complements the reactivities among cations for both homogeneous AIGS cores in various compositions and uniform AGS shell growth. The heteroepitaxy between AIGS and AGS results in the Type I heterojunction that effectively confines charge carriers within the emissive core without optically active interfacial defects. AIGS-AGS NCs show higher extinction coefficient and narrower spectral linewidth compared to state-of-the-art heavy metal-free NCs, prompting their immediate use in practicable applications including displays and luminescent solar concentrators (LSCs).

42 ENGINEERING↗

Ag-Au nanoclusters: Structure and phase segregation

We present a systematic survey of unprotected Ag-Au nanoclusters prepared by inert gas aggregation. The clusters are initially fully and homogeneously alloyed, exhibiting icosahedral and decahedral structural motifs. Imaging using scanning transmission electron microscopy indicates that over a period of up to 2 yr, the nanoclusters undergo structural transitions into phase-segregated core-shell and Janus particles with Ag-Au cores and Ag{sub x}O shells. Larger Janus particles undergo a ripening process which results in division into separate Ag-Au-rich and Ag{sub 2}O-rich particles. We propose that oxidation of the Ag component and subsequent diffusion of Ag{sub x}O are responsible for the observed phenomena.

36 MATERIALS SCIENCE↗

Effect of Ti seed layers on structure of self-organized epitaxial face-centered-cubic-Ag(001) oriented nanodots

The influence of Ti seed layers on the structure of self-organized Ag nanodots, obtained with a Ti seed-layer-assisted thermal agglomeration method, has been investigated. The samples were grown on MgO(001) single crystal substrates by RF magnetron sputter deposition. The samples were deposited at room temperature and post-annealed at 350 °C for 4 h while maintaining the chamber vacuum conditions. The results of atomic force microscopy (AFM) observations indicated that the insertion of the Ti seed layer (0.6–5.0 nm) between the MgO substrate and Ag layer promotes the agglomeration process, forming the nanodot array. Comparisons between the AFM images revealed that the size of the Ag nanodots was increased with an increase in the Ti seed layer thickness. The atomic concentration of the film surface was confirmed by X-ray photoelectron spectroscopy (XPS). The XPS result suggested that the nanodot surface mainly consisted of Ag. Moreover, X-ray diffraction results proved that the initial deposition of the Ti seed layer (0.6–5.0 nm) onto MgO(001) prior to the Ag deposition yielded high-quality fcc-Ag(001) oriented epitaxial nanodots. The optical absorbance spectra of the fabricated Ag nanodots with various Ti seed layer thicknesses were obtained in the visible light range.

36 MATERIALS SCIENCE↗

Local atomic structure inheritance in Ag{sub 50}Sn{sub 50} melt

Local structure inheritance signatures were observed during the alloying process of the Ag{sub 50}Sn{sub 50} melt, using high-temperature X-ray diffraction and ab initio molecular dynamics simulations. The coordination number N{sub m} around Ag atom is similar in the alloy and in pure Ag melts (N{sub m} ∼ 10), while, during the alloying process, the local structure around Sn atoms rearranges. Sn-Sn covalent bonds were substituted by Ag-Sn chemical bonds, and the total coordination number around Sn increases by about 70% as compared with those in the pure Sn melt. Changes in the electronic structure of the alloy have been studied by Ag and Sn K-edge X-ray absorption spectroscopy, as well as by calculations of the partial density of states. We propose that a leading mechanism for local structure inheritance in Ag{sub 50}Sn{sub 50} is due to s-p dehybridization of Sn and to the interplay between Sn-s and Ag-d electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗