Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “2D limit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thermal hysteresis controlled reconfigurable MoS 2 nanomechanical resonators

Two-dimensional (2D) structures from layered materials have enabled a number of novel devices including resonant nanoelectromechanical systems (NEMS). 2D NEMS resonators are highly responsive to strain, allowing their resonance frequencies to be efficiently tuned over broad ranges, which is a feature difficult to attain in conventional micromachined resonators. In electrically configured and tuned devices, high external voltages are typically required to set and maintain different frequencies, limiting their applications. Here we experimentally demonstrate molybdenum disulfide (MoS 2 ) nanomechanical resonators that can be reconfigured between different frequency bands with zero maintaining voltage in a non-volatile fashion. By leveraging the thermal hysteresis in these 2D resonators, we use heating and cooling pulses to reconfigure the device frequency, with no external voltage required to maintain each frequency. Here, we further show that the frequency spacing between the bands can be tuned by the thermal pulse strength, offering full control over the programmable operation. Such reconfigurable MoS 2 resonators may provide an alternative pathway toward small-form-factor and low-power tunable devices in future reconfigurable radio-frequency circuits with multi-band capability.

42 ENGINEERING↗
DOE OSTI2020

Magnetic structure and exchange interactions in the layered semiconductor CrPS 4

Compounds with two-dimensional (2D) layers of magnetic ions weakly connected by van der Waals bonding offer routes to enhance quantum behavior, stimulating both fundamental and applied interest. CrPS 4 is one such magnetic van der Waals material, however, it has undergone only limited investigation. Here we present a comprehensive series of neutron scattering measurements to determine the magnetic structure and exchange interactions. The observed magnetic excitations allow a high degree of constraint on the model parameters not normally associated with measurements on a powder sample. The results demonstrate the 2D nature of the magnetic interactions, while also revealing the importance of interactions along 1D chains within the layers. The subtle role of competing interactions is observed, which manifest in a nontrivial magnetic transition and a tunable magnetic structure in a small applied magnetic field through a spin-flop transition. Our results on the bulk compound provide insights that can be applied to an understanding of the behavior of reduced layer CrPS 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

From large to small $$ \mathcal{N} $$ = (4, 4) superconformal surface defects in holographic 6d SCFTs

Abstract Two-dimensional (2d)$$ \mathcal{N} $$ N = (4, 4) Lie superalgebras can be either “small” or “large”, meaning their R-symmetry is either$$ \mathfrak{so} $$ so (4) or$$ \mathfrak{so} $$ so (4) ⊕$$ \mathfrak{so} $$ so (4), respectively. Both cases admit a superconformal extension and fit into the one-parameter family$$ \mathfrak{d} $$ d (2,1;γ) ⊕$$ \mathfrak{d} $$ d (2,1;γ), with parameterγ∈ (−∞,∞). The large algebra corresponds to generic values ofγ, while the small case corresponds to a degeneration limit withγ→ −∞. In 11d supergravity, we study known solutions with superisometry algebra$$ \mathfrak{d} $$ d (2,1;γ) ⊕$$ \mathfrak{d} $$ d (2,1;γ) that are asymptotically locally AdS 7 ×𝕊 4 . These solutions are holographically dual to the 6d maximally superconformal field theory with 2d superconformal defects invariant under$$ \mathfrak{d} $$ d (2,1;γ) ⊕$$ \mathfrak{d} $$ d (2,1;γ). We show that a limit of these solutions, in whichγ→ −∞, reproduces another known class of solutions, holographically dual tosmall$$ \mathcal{N} $$ N = (4, 4) superconformal defects. We then use this limit to generate new small$$ \mathcal{N} $$ N = (4, 4) solutions with finite Ricci scalar, in contrast to the known small$$ \mathcal{N} $$ N = (4, 4) solutions. We then use holography to compute the entanglement entropy of a spherical region centered on these small$$ \mathcal{N} $$ N = (4, 4) defects, which provides a linear combination of defect Weyl anomaly coefficients that characterizes the number of defect-localized degrees of freedom. We also comment on the generalization of our results to include$$ \mathcal{N} $$ N = (0,4) surface defects through orbifolding.

Physics↗
DOE OSTI2020

Electrical and Elastic Properties of Individual Single-Layer Nb 4 C 3 T x MXene Flakes

2D carbides and nitrides (MXenes) are widely recognized for their exceptional promise for numerous applications. However, physical property measurements of their individual monolayers remain very limited despite their importance for revealing the intrinsic physical properties of MXenes. The first mechanical and electrical measurements of individual single-layer flakes of Nb 4 C 3 T x MXene, which are prepared via an improved synthetic method are reported. Characterization of field-effect transistor devices based on individual single-layer Nb 4 C 3 T x flakes shows an electrical conductivity of 1024 ± 165 S cm -1 , which is two orders of magnitude higher than the previously reported values for bulk Nb 4 C 3 T x assemblies, and an electron mobility of 0.41 ± 0.27 cm 2 V -1 s -1 . Atomic force microscopy nanoindentation measurements of monolayer Nb 4 C 3 T x membranes yield an effective Young's modulus of 386 ± 13 GPa, assuming a membrane thickness of 1.26 nm. This is the highest value reported for nanoindentation measurements of solution-processable 2D materials, revealing the potential of Nb 4 C 3 T x as a primary component for various mechanical applications. In conclusion, the agreement between the mechanical properties of 2D Nb 4 C 3 T x MXene and cubic NbC suggests that the extensive experimental data on bulk carbides could be useful for identifying new MXenes with improved functional characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

NMDQi Thermal-hydraulic Optimization, Analysis, and Scoping Tool (TOAST)

The Thermal-hydraulic Optimization, Analysis, and Scoping Tool (TOAST) is developed to support the thermal-hydraulic aspects for the design of optimal irradiation vehicles for the Nuclear Materials Discovery and Qualification initiative (NMDQi). TOAST is currently a MATLAB-based tool that utilizes a simplified steady-state analytical model where a radial thermal resistance circuit is utilized to account for conduction through up to 2 capsules, a gas gap, a thermal bond, a sample cladding, and a sample, as well as the convection from a water coolant outside the capsules. The geometry is discretized axially along the user-defined height of a basket with a user-defined number of points/nodes, essentially turning TOAST into a semi-2D heat transfer analysis utility for cylindrical irradiation vehicles with practically any configuration, solving for temperatures radially at multiple axial locations. TOAST utilizes a Graphical User Interface (GUI) in-which a user can define the geometrical layout, the materials utilized for each component, the coolant characteristics, and the required solution. The user can define the geometry by inputting the diameters, thicknesses, and heights for each component, whereas the materials are defined via the user-provided constant or variable thermal conductivities. The user can select the coolant's inlet temperature, pressure, and the pressure drop across the height of the problem (which is used to calculate the velocity of the flow). Finally, the user can choose to solve for a sample heat generation rate limit by inputting temperature limits for the sample and capsules or can choose to purely solve for the axial temperature distributions of each component by inputting a pre-selected heat generation rate. Either way, TOAST provides the user with axial temperature distributions of all the components including the coolant, and the heat generation rate limit as well as the maximum outlet coolant temperature. The user can also choose to do one of 6 sensitivity analyses in TOAST. The sensitivity analyses yield plots of the sensitivity of the heat generation rate limit, the maximum coolant temperature, and the pressure limit for the annular components due to perturbations in 1-2 unknown variables based on the selected sensitivity analysis. Benchmarks between computations in TOAST and equivalent 2D axis symmetric ABAQUS models are presented, showing that TOAST results are within less than 3% of ABAQUS results in most cases, and a maximum of 8% difference in some cases. The benchmarks also revealed that this uncertainty is tied to the selection of an appropriate Nusselt number correlation and appropriate thermal conductivities, which the user can do from the GUI. Regardless, TOAST is demonstrated as a computationally efficient, highly accessible, and accurate utility for optimization and scoping s of studies different irradiation vehicles.

42 ENGINEERING↗
DOE OSTI2024

A Review of Nanocarbon-Based Anode Materials for Lithium-Ion Batteries

Renewable and non-renewable energy harvesting and its storage are important components of our everyday economic processes. Lithium-ion batteries (LIBs), with their rechargeable features, high open-circuit voltage, and potential large energy capacities, are one of the ideal alternatives for addressing that endeavor. Despite their widespread use, improving LIBs’ performance, such as increasing energy density demand, stability, and safety, remains a significant problem. The anode is an important component in LIBs and determines battery performance. To achieve high-performance batteries, anode subsystems must have a high capacity for ion intercalation/adsorption, high efficiency during charging and discharging operations, minimal reactivity to the electrolyte, excellent cyclability, and non-toxic operation. Group IV elements (Si, Ge, and Sn), transition-metal oxides, nitrides, sulfides, and transition-metal carbonates have all been tested as LIB anode materials. However, these materials have low rate capability due to weak conductivity, dismal cyclability, and fast capacity fading owing to large volume expansion and severe electrode collapse during the cycle operations. Contrarily, carbon nanostructures (1D, 2D, and 3D) have the potential to be employed as anode materials for LIBs due to their large buffer space and Li-ion conductivity. However, their capacity is limited. Blending these two material types to create a conductive and flexible carbon supporting nanocomposite framework as an anode material for LIBs is regarded as one of the most beneficial techniques for improving stability, conductivity, and capacity. This review begins with a quick overview of LIB operations and performance measurement indexes. It then examines the recently reported synthesis methods of carbon-based nanostructured materials and the effects of their properties on high-performance anode materials for LIBs. These include composites made of 1D, 2D, and 3D nanocarbon structures and much higher Li storage-capacity nanostructured compounds (metals, transitional metal oxides, transition-metal sulfides, and other inorganic materials). The strategies employed to improve anode performance by leveraging the intrinsic features of individual constituents and their structural designs are examined. The review concludes with a summary and an outlook for future advancements in this research field.

25 ENERGY STORAGE↗
DOE OSTI2025

Signature of magnetoelectric coupling driven finite momentum pairing in 3D ising superconductor

The finite momentum superconducting paring states (FMPs) represent a forefront of condensed matter physics. Here we report experimental evidence of FMP in a locally noncentrosymmetric bulk superconductor 4H b -TaS 2 . Using hard X-ray diffraction and angle-resolved photoemission spectroscopy, we reveal unusual 2D ferro-rotational charge density wave (CDW) and weak interlayer hopping in 4H b -TaS 2 . The superconducting upper critical field, H c2 , linearly increases via decreasing temperature, and well exceeds the Pauli limit, suggesting the dominant orbital pair-breaking mechanism. Remarkably, we observed evidence of field-induced superconductivity-to-superconductivity transition that breaks continuous rotational symmetry of the s-wave uniform pairing in the Bardeen-Cooper-Schrieffer theory down to the six-fold rotation symmetry. Ginzburg-Landau free energy analysis shows that magnetoelectric coupling, induced by 2D ferro-rotational CDW, stabilizes FMP that provides an explanation of the lowering rotation symmetry. Our results provide a new understanding of unconventional superconducting behaviors of the bulk quantum heterostructure 4H b -TaS 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

CsO x Nanostructures on Au(111): Morphology- and Size-dependent Activity for the Water–Gas Shift Reaction

Alkali oxides are typically used as promoters of heterogeneous catalysts for the water–gas shift (WGS; H 2 O + CO → H 2 + CO 2 ) reaction. On Au(111), CsO x exhibits diverse nanostructures at varying coverages, as revealed by scanning tunneling microscopy. Clusters of cesium oxide (Cs 2 O 2 ) nucleate at elbow sites of the Au(111) herringbone when θ Cs is less than 0.1 ML. Subsequently, these clusters transform into two-dimensional (2D) islands (Cs 2 O, Cs 2 O 2 , CsO 2 ) as the cesium coverage increases (θ Cs > 0.1 ML). Both types of CsO x nanostructures enable the WGS process on Au(111). The highest activity was seen for the cesium oxide clusters which facilitated the partial dissociation of water and binding of CO. The CO ads and OH ads groups were not strongly bound and probably reacted to yield a short-lived HOCO intermediate that led to gaseous H 2 and CO 2 . The 2D islands of CsO x also enabled the WGS but their efficiency was reduced due to the formation of cesium hydroxide compounds (limiting mobility of OH groups) and the generation of CO 3 and C species (blocking of active centers). The fact that the performance of the CsO x /Au(111) catalysts changed dramatically with variations in the chemical properties of the CsO x nanostructures indicates that the alkali oxide was an integral part of the active phase, playing a central role in the activation and conversion of the reactants. To attach the label of “promoter” to CsO x is a simplification that does not help in the design and optimization of catalysts for C1 chemistry. In conclusion, to achieve a rational design, one must consider the structural and chemical properties of the alkali oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Latent space mapping: Revolutionizing predictive models for divertor plasma detachment control

The inherent complexity of boundary plasma, characterized by multi-scale and multi-physics challenges, has historically restricted high-fidelity simulations to scientific research due to their intensive computational demands. Consequently, routine applications such as discharge control and scenario development have relied on faster but less accurate empirical methods. This work introduces DivControlNN, a novel machine-learning-based surrogate model designed to address these limitations by enabling quasi-real-time predictions (i.e., ~ 0.2 ms) of boundary and divertor plasma behavior. Trained on over 70,000 2D UEDGE simulations from KSTAR tokamak equilibria, DivControlNN employs latent space mapping to efficiently represent complex divertor plasma states, achieving a computational speed-up of over 10 8 compared to traditional simulations while maintaining a relative error below 20% for key plasma property predictions. During the 2024 KSTAR experimental campaign, a prototype detachment control system powered by DivControlNN successfully demonstrated detachment control on its first attempt, even for a new tungsten divertor configuration and without any fine-tuning. These results highlight the transformative potential of DivControlNN in overcoming diagnostic challenges in future fusion reactors by providing fast, robust, and reliable predictions for advanced integrated control systems.

Artificial neural networks↗
DOE OSTI2021

Effects of emitting surfaces and trapped ions on the sheath physics and current flow in multidimensional plasma systems

Recent one-dimensional simulations of planar sheaths with strong electron emission have shown that trapping of charge-exchange ions causes transitions from space-charge limited (SCL) to inverse sheaths. However, multidimensional emitting sheath phenomena with collisions remained unexplored, due in part to high computational cost. As such, we developed a novel continuum kinetic code to study the sheath physics, current flow and potential distributions in two-dimensional unmagnetized configurations with emitting surfaces. For small negatively biased thermionic cathodes in a plasma, the cathode sheath can exist in an equilibrium SCL state. The SCL sheath carries an immense density of trapped ions, neutralized by thermoelectrons, within the potential well of the virtual cathode. For further increases of emitted flux, the trapped ion cloud expands in space. The trapped ion space charge causes an increase of thermionic current far beyond the saturation limit predicted by conventional collisionless SCL sheath models without ion trapping. For sufficiently strong emission, the trapped ion cloud consumes the entire 2D plasma domain, forming a mode with globally confined ions and an inverse sheath at the cathode. In situations where the emitted flux is fixed and the bias is swept (e.g. emissive probe), the trapped ions cause a large thermionic current to escape for all biases below the plasma potential. Strong suppression of the thermionic emission, required for the probe to float, only occurs when the probe is above the plasma potential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Intermolecular vibrations mediate ultrafast singlet fission

Singlet fission is a spin-allowed exciton multiplication process in organic semiconductors that converts one spin-singlet exciton to two triplet excitons. It offers the potential to enhance solar energy conversion by circumventing the Shockley-Queisser limit on efficiency. We study the primary steps of singlet fission in a pentacene film by using a combination of TG and 2D electronic spectroscopy complemented by quantum chemical and nonadiabatic dynamics calculations. We show that the coherent vibrational dynamics induces the ultrafast transition from the singlet excited electronic state to the triplet-pair state via a degeneracy of potential energy surfaces, i.e., a multidimensional conical intersection. Significant vibronic coupling of the electronic wave packet to a few key intermolecular rocking modes in the low-frequency region connect the excited singlet and triplet-pair states. Along with high-frequency local vibrations acting as tuning modes, they open a new channel for the ultrafast exciton transfer through the resulting conical intersection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Detection of defects in atomic-resolution images of materials using cycle analysis

The automated detection of defects in high-angle annular dark-field Z-contrast (HAADF) scanning-transmission-electron microscopy (STEM) images has been a major challenge. Here, we report an approach for the automated detection and categorization of structural defects based on changes in the material’s local atomic geometry. The approach applies geometric graph theory to the already-found positions of atomic-column centers and is capable of detecting and categorizing any defect in thin diperiodic structures (i.e., “2D materials”) and a large subset of defects in thick diperiodic structures (i.e., 3D or bulk-like materials). Despite the somewhat limited applicability of the approach in detecting and categorizing defects in thicker bulk-like materials, it provides potentially informative insights into the presence of defects. The categorization of defects can be used to screen large quantities of data and to provide statistical data about the distribution of defects within a material. This methodology is applicable to atomic column locations extracted from any type of high-resolution image, but here we demonstrate it for HAADF STEM images.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Transient Nanoscopy of Exciton Dynamics in 2D Transition Metal Dichalcogenides

Abstract The electronic and optical properties of 2D transition metal dichalcogenides are dominated by strong excitonic resonances. Exciton dynamics plays a critical role in the functionality and performance of many miniaturized 2D optoelectronic devices; however, the measurement of nanoscale excitonic behaviors remains challenging. Here, a near‐field transient nanoscopy is reported to probe exciton dynamics beyond the diffraction limit. Exciton recombination and exciton–exciton annihilation processes in monolayer and bilayer MoS 2 are studied as the proof‐of‐concept demonstration. Moreover, with the capability to access local sites, intriguing exciton dynamics near the monolayer‐bilayer interface and at the MoS 2 nano‐wrinkles are resolved. Such nanoscale resolution highlights the potential of this transient nanoscopy for fundamental investigation of exciton physics and further optimization of functional devices.

2D materials↗
DOE OSTI2021

Highly Efficient Uniaxial In-Plane Stretching of a 2D Material via Ion Insertion

On-chip dynamic strain engineering requires efficient micro-actuators that can generate large in-plane strains. Inorganic electrochemical actuators are unique in that they are driven by low voltages (≈1 V) and produce considerable strains (≈1%). However, actuation speed and efficiency are limited by mass transport of ions. Minimizing the number of ions required to actuate is thus key to enabling useful “straintronic” devices. Here, it is shown that the electrochemical intercalation of exceptionally few lithium ions into WTe 2 causes large anisotropic in-plane strain: 5% in one in-plane direction and 0.1% in the other. This efficient stretching of the 2D WTe 2 layers contrasts to intercalation-induced strains in related materials which are predominantly in the out-of-plane direction. The unusual actuation of Li x WTe 2 is linked to the formation of a newly discovered crystallographic phase, referred to as Td', with an exotic atomic arrangement. On-chip low-voltage (<0.2 V) control is demonstrated over the transition to the novel phase and its composition. Within the Td'-Li 0.5-δ WTe 2 phase, a uniaxial in-plane strain of 1.4% is achieved with a change of δ of only 0.075. This makes the in-plane chemical expansion coefficient of Td'-Li 0.5-δ WTe 2 far greater than of any other single-phase material, enabling fast and efficient planar electrochemical actuation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultra‐Steep Slope Impact Ionization Transistors Based on Graphene/InAs Heterostructures

With the continued scaling of transistors, there is a growing trend for developing steep slope transistors with subthreshold swing (SS) below Boltzmann limitation ( k T/ q ). To this end, impact ionization metal oxide semiconductor (I‐MOS) transistors are attractive for a unique combination of high ON‐state current density, small hysteresis, and ultra‐steep SS slope. However, the performance of I‐MOS is generally limited by the relatively thick depletion region and large operation voltage required for the activation of impact ionization (typically >5 V). Herein, a high‐performance I‐MOS is constructed by van der Waals integrating single‐crystal InAs film with graphene. Due to the low bandgap of InAs as well as the semi‐metallic nature of graphene, the InAs/graphene I‐MOS demonstrates a low operation voltage of 1.5 V, high ON‐state current of 230 μA μm −1 , steep SS <0.6 mV dec −1 , and large ON–OFF ratio >10 6 at temperature below 200 K. Furthermore, a negative transconductance and steep current oscillation is observed in the subthreshold regime, and a device working mechanism is proposed for this novel phenomenon. This study not only pushes the performance limit of I‐MOS but also defines a general pathway to van der Waals heterostructures between conventional III–V compound semiconductors and novel 2D materials for unconventional device functions.

Liu, Yuan↗
DOE OSTI2025

Copper-Based Two-Dimensional Conductive Metal–Organic Framework Thin Films for Ultrasensitive Detection of Perfluoroalkyls in Drinking Water

Perfluoroalkyls (PFAS) continue to emerge as a global health threat making their effective detection and capture extremely important. Though metal–organic frameworks (MOFs) have stood out as a promising class of porous materials for sensing PFAS, detection limits remain insufficient and a fundamental understanding of detection mechanisms warrants further investigation. Here, in this study, we show the use of a 2D conductive MOF film based on copper hexahydroxy triphenylene (Cu-HHTP) to fabricate chemiresistive sensing devices for detecting PFAS in drinking water. We further show ultrasensitive detection using electrochemical impedance spectroscopy. Owing to excellent electrostatic attractions and electrochemical interactions between the copper-based MOF and PFAS, confirmed by high-resolution spectroscopy and theoretical simulations, the MOF-based sensor reported herein exhibits excellent affinity and sensitivity toward perfluorinated acids at concentrations as low as 0.002 ng/L.

2D metal−organic frameworks↗
DOE OSTI2022

Resonant three-wave interactions with linear source/sink terms: Exploring the parameter space

Here, it is shown that the resonance three wave interactions in the presence of linear source/sink terms exhibit a wide variety of time-evolution dynamics, such as exponential growth, limit cycles, and strange attractors. The particular features of the dynamics are determined primarily by the values of linear growth rates, forming a 2D parameter space. An exploration of this parameter space is the main focus of this present work.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Emulating 2D Materials with Magnons

Spin waves (magnons) in two-dimensional (2D) materials have received increasing interest due to their unique states and potential for tunability. However, many interesting features of these systems, including Dirac points and topological states, occur at high frequencies, where experimental probes are limited. Here, we study a crystal formed by patterning a hexagonal array of holes in a perpendicularly magnetized thin film. Through simulation, we find that the magnonic band structure imitates that of graphene, but additionally has some kagomelike character and includes a few flat bands. Surprisingly, its nature can be understood using a nine-band tight-binding Hamiltonian. This clear analogy to 2D materials enables band-gap engineering in 2D, topological magnons along 1D phase boundaries, and spectrally isolated modes at 0D point defects. Interestingly, the 1D phase boundaries allow access to the valley degree of freedom through a magnonic analog of the quantum valley Hall insulator. These approaches can be extended to other magnonic systems, but are potentially more general due to the simplicity of the model, which resembles existing results from electron, phonon, photon, and cold-atom systems. This finding brings the physics of spin waves in 2D materials to more experimentally accessible scales, augments it, and outlines a few principles for controlling magnonic states.

Ferrimagnets↗