Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “writing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Progress Summary: 17-Month Compression Set and Load Retention of Thermally Accelerated Aged Siloxane Specimens (Additively Manufactured by the Direct-Ink-Write (DIW) 3D Printing Technique) was Measured

Accelerated aging of polymeric materials is needed to predict their long-term mechanical functionality. Two key metrics used to evaluate their performance are compression set and load retention. A baseline (time = 0) mechanical assessment was done prior to initiating the accelerated aging process to acquire initial thickness and load values for future calculation of compression set and load retention.

36 MATERIALS SCIENCE↗

Radiation Aging of Siloxane Specimens Additively Manufactured by the Direct-Ink-Write (DIW) 3D Printing Technique

Accelerated aging of polymeric materials is needed to predict their long-term mechanical functionality. Two key metrics used to evaluate their performance are compression set and load retention. Previously, DIW siloxane specimens were subjected to radiation doses between 1 and 10 Mrad while under compression, followed by measurement of thickness (to calculate compression set) and load deflection (to calculate load retention). To support a modeling effort, a range of lower doses is needed.

36 MATERIALS SCIENCE↗

In Situ Monitoring of Direct Ink Write Process Using Electromagnetic Resonant Coupling

Additive manufacturing (AM) of multi-material objects enables the design of complex 3D architectures such as printed electronics and devices. The ability to detect the composition of multi-material printed inks in real time is an emerging need for a wide range of manufacturing applications. This study demonstrates the feasibility of using an in situ sensor to locally measure the composition of inks as they are being printed to facilitate greater control over the resulting properties and functionality of printed materials. Dielectric properties of microscale embedded metal particles in a dielectric matrix are measured and characterized as a function of particle size, shape, volume percentage and frequency. Results show that particle shape has a much greater influence on impedance measurements than the particle size. Measurements are found to agree with calculations based on an anisotropic Maxwell-Garnett dielectric function model. The resulting data can be used to generate a calibration curve correlating metal loading with impedance or capacitance and thus applied as an in situ sensor for compositional measurements during extrusion-based AM.

36 MATERIALS SCIENCE↗

Low-Cost, Efficient and Durable High Temperature Wireless Sensors by Direct Write Additive Manufacturing for Application in Fossil Energy Systems

In-situ monitoring of physical parameters in fossil energy (FE) systems is challenging because of their high operating temperatures and oxidizing environments. This research aims utilize Aerosol Jet (AJ) nanoparticle printing, an advanced additive manufacturing method, to fabricate high temperature sensors for FE applications. Sensor films were fabricated by the AJ printing method with an excellent control over film microstructure and properties, in addition to creating less waste. Printing of six different materials, namely, silver (Ag), nickel (Ni), nickel-chromium (NiCr) alloy, copper (Cu), copper-nickel (CuNi), and carbon nanotubes (CNTs) was carried out for their evaluation of as sensor films. The films were then characterized using impedance spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS). Film microstructure was correlated with the sensor electrical and mechanical behavior at different temperatures (24-500 °C) and frequencies (0.02 - 300 kHz). This knowledge was then used to fabricate, test, and characterize strain and temperature sensors for high temperature applications. The strain sensors were shown to have a very low thermal strain up to 500 °C and a 57% higher gauge factor compared to the commercially available counterparts. This enhance performance was attributed to the inherent porosity in the sensor films that allowed the films to exhibit a metamaterial-like behavior when deformed. The AJ printed temperature sensors were shown to have the highest Seebeck coefficient amongst all the film-based temperature sensors. In addition, fundamental aspects of crystal structure and phase transformations in Ba(Fe0.7Ta0.3)O3-δ (BFTO), a high temperature sensor material, was investigated along with 3D printed antennas that can transmit sensor signals at high temperatures. Two PhD students, one from first generation college-going underrepresented minority community (URM), two postdoctoral fellows, and several masters and undergraduate students were supported by this award. This work opens up the possibility of realizing low-cost high-performance sensor devices using advanced manufacturing techniques for high temperature FE applications.

20 FOSSIL-FUELED POWER PLANTS↗

Demonstration of a Desktop Liquid Direct Metal Write Additive Manufacturing System (CRADA NFE-17-06531 Final Report)

ORNL worked with PrintSpace 3D to demonstrate cost effective electromagnetic induction melting of aluminum alloys on their desktop Altair 3D printer. An electromagnetic coil design and susceptor have been optimized and paired with a high frequency power supply to melt Al-Ce alloys. The manufacturing feasibility of Al-Ce wire was also proven to be successful and precise process control of electro-magnetic heating was demonstrated. The system was found to have inherent safety benefits, requiring no powder handling and with very localized heating. Further research will demonstrate the ability to use DMW technology to print high temperature engine components for the transportation industry.

36 MATERIALS SCIENCE↗

NA-22 Write for Consortium Efforts

We are asked to look into the improvements for the measurement of Pu of a variety of material types (MT): MT41 (Pu-242, 20 – 60% enriched), MT42 (Pu-242 > 60% enrichment), and MT-82 (Np-237). Many of these are legacy items that were packaged years ago (Fig 1&2), and when the items are re-packaged for long-term storage, they must be re-measured using either NDA (nondestructive analysis methods or radiochemical methods. It is of interest to improve the NDA and radiochemistry to reduce the un-certainty in the measurements, as in the case of larger items (250 g to 2 kg items) the uncertainty in measurements makes it difficult to certify the mass of the material down to the 0.5 g accountability requirement per DOE orders by only doing NDA measurement. It would be of interest to look into methods to improve the detection of these materials, which would not only benefit the weapon manufacturing community, but also has the ability to significantly improve the non-proliferation community.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

TSQP Writing Qualification Standards [Slides]

The purpose of this course is to help you develop the skills necessary to create qualification standards, using the approved LANL template following guidelines and requirements established in appropriate drivers.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗