Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “utility selection process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Advancement of Commercial Intumescent Expanding Foams for Deactivation and Decommissioning in the Nuclear Sector - 20198

Florida International University (FIU), in collaboration with The Department of Energy's Office of Environmental Management (DOE-EM), Savannah River National Laboratory (SRNL), and sites across the Savannah River complex, have identified an operational requirement for a fixative technology that is intended to immobilize and/or isolate residual contamination within a 3-dimensional space. Fixation of radiological contamination can reduce worker risk and mitigate potentially hazardous conditions, however nearly every marketed contamination fixative has been found to be flammable; a significant concern in radiological facilities. Coupled with this, industry fixatives are normally used as a thin coating which can present problems when attempting to stabilize irregular geometry or areas that are difficult to access whilst ensuring full coverage. The technical evaluation and advancement of commercial-off-the-shelf (COTS) polyurethane foams has yielded a down-selected candidate that shows potential in meeting the requirements to support deactivation and decommissioning activities. Several performance criteria have been established and tested to progress the technology readiness level towards an active field demonstration (TRL-7). Such criteria include: mechanical failure limits, adhesive and cohesive properties, thermal/fire resilience, determining thermal behavior, ability to immobilize contamination, and a means of non-destructive evaluation of applications. The test scenario examined was targeted towards an application for decommissioning nuclear pipework, in which the down-selected polyurethane foam would act as a barrier to segregate pipework and mitigate the potential for release during cutting, packaging, and storage operations. Testing carried out at SRNL included: mechanical evaluation of tensile, compressive, and adhesion strength by dynamic mechanical analysis (DMA), as well as thermogravimetric analysis (TGA). FIU examined the foam's fixative properties by utilizing phosphorescent europium-dysprosium doped strontium aluminate powder to investigating the extent to which contamination can be immobilized. FIU has also exploited previous successes in the field of intumescent technologies to assess the down-selected foam's tolerance to an extreme fire scenario, while maintaining the ability to effectively mitigate a contamination release. Parallel to this, extensive thermal investigations were carried out to determine the upper boundary of anticipated heat generation during the curing process as heat generation has the potential to compromise rubber parts of contaminated enclosures. These investigations subsequently yielded a promising method for a non-destructive application evaluation by means of infrared thermography. Utilizing the high sensitivity of modern IR cameras, coupled with the heat generated during the curing process of the polyurethane foam, FIU has been exploring the concept of monitoring the external pipe surface for indications of an irregular or abnormal application, thus informing operational decision making. The testing carried out utilized several current 'best fit' ASTM standards, which serve as helpful guidelines for testing, however, a precise definition of the operational parameters and requirements is still necessary. With continued collaboration with SRNL, FIU aims refine said definitions and develop new standards by which this, and other decommissioning technologies, can be accredited by relevant standards based testing. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Chemical Understanding of Actinide Separations

This work provides a broad overview of the separation processes used to isolate actinides and the experimentally and computationally determined chemical characteristics that define those separations. The redox chemistry of the actinides plays a pivotal role in both aqueous and pyrochemical processing separations. The near-overlapping energies of the 6d and 5f orbitals in the light actinides allow for facile adjustment of actinide oxidation states, which is used in many established separation methods. In contrast, the stable, generally 3+ oxidation states of the mid- and heavy actinides can make it difficult to separate them from the similarly lanthanides(III). In aqueous separations, the tendency of the actinides to form anionic and neutral aqueous complexes with a variety of complexants (especially soft donors) is used to achieve high separation factors between chemically similar elements in both solid–liquid separations and liquid–liquid extraction. This selectivity can be further tuned through the use of specialized organic or solid-phase ligands. Pyroprocessing separations utilize the unique redox behavior of the actinides to adjust their distribution between a molten salt electrolyte and either a solid electrode or molten metal phase. Atomic-level insights into the mechanisms underlying actinide separation processes, with the ultimate goal of predicting separation behavior, can be provided by electronic structure and statistical mechanical-based calculation methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2019

Bringing Analysis Closer to Data: Developing a Visualization Tool for L2 Earth Science Satellite Data

Earth Science satellite missions provide a unique opportunity for scientists to visualize complex and multifaceted observations projected geospatially across maps of the Earth. While visualization tools can help scientists comprehend, analyze, and share data, visualizing Level-2 Earth Sciences data poses its own specific set of challenges. Since the geospatial information in Level-2 data files is stored as independent variables, the plotting process involves matching dimensional information from latitude and longitude with a desired variable. Variables are stored in different ways across various Earth Science data file formats, which complicates the process of extracting data and plotting variables from a given file without requiring extensive user input and prerequisite familiarity with the file type variable structure. In coordination with NASA’s Goddard Earth Sciences Data Information Services Center (GES DISC), the team developed a Level-2 Earth Science data visualization tool that aims to address some of the complexities associated with plotting Level-2 data. This tool offers command-line and user interface support for file and variable selection to accommodate varying use cases and degrees of user familiarity with the structure of a given file. The visualization tool is written in Python 3 and utilizes a modular approach to facilitate continued expansion and reuse. In addressing some common complications involved in plotting Level-2 Earth Sciences data, the tool aims to help to link the process of analysis more directly with data acquisition and visualization, bringing analysis closer to data across levels of processing.

Li, Angela W.↗
DOE OSTI2020

Recent advances in polymeric facilitated transport membranes for carbon dioxide separation and hydrogen purification

Membrane and membrane process have been widely considered as one of the best candidates for mitigating CO 2 emissions from the combustion or utilization of fossil fuels. Various amine-containing polymers constitute an important class of membranes, where the highly selective CO 2 transport is achieved by the facilitated transport mechanism. In this review, the amine–CO 2 chemistry is discussed in conjunction with the mechanism of the reaction-mediated CO 2 transport. A wide variety of amine-containing polymers are discussed based on two synthesis motifs: (a) polyamines with amino groups covalently bound to the polymer backbone and (b) small molecule amines embedded in a polymer matrix. This review concludes with the remarks on the facilitated transport membranes for post-combustion carbon capture (CO 2 /N 2 ) and hydrogen purification (CO 2 /H 2 ).

42 ENGINEERING↗
DOE OSTI2020

Application and Certification of Comparative Vacuum Monitoring Sensors for Structural Health Monitoring of 737 Wing Box Fittings

Multi-site fatigue damage, hidden cracks in hard-to-reach locations, disbonded joints, erosion, impact, and corrosion are among the major flaws encountered in today's extensive fleet of aging aircraft and space vehicles. The use of in-situ sensors for real-time health monitoring of aircraft structures are a viable option to overcome inspection impediments stemming from accessibility limitations, complex geometries, and the location and depth of hidden damage. Reliable, structural health monitoring systems can automatically process data, assess structural condition, and signal the need for human intervention. Prevention of unexpected flaw growth and structural failure can be improved if on-board health monitoring systems are used to continuously assess structural integrity. Such systems are able to detect incipient damage before catastrophic failures occurs. Condition-based maintenance practices could be substituted for the current time-based maintenance approach. Other advantages of on-board distributed sensor systems are that they can eliminate costly, and potentially damaging, disassembly, improve sensitivity by producing optimum placement of sensors and decrease maintenance costs by eliminating more time- consuming manual inspections. This report presents a Sandia Labs-aviation industry effort to move SHM into routine use for aircraft maintenance. This program addressed formal SHM technology validation and certification issues so that the full spectrum of concerns, including design, deployment, performance and certification were appropriately considered. The Airworthiness Assurance NDI Validation Center (AANC) at Sandia Labs, in conjunction with Boeing, Delta Air Lines, Structural Monitoring Systems Ltd., Anodyne Electronics Manufacturing Corp. and the Federal Aviation Administration (FAA) carried out a certification program to formally introduce Comparative Vacuum Monitoring (CVM) as a structural health monitoring solution to a specific aircraft wing box application. Validation tasks were designed to address the SHM equipment, the health monitoring task, the resolution required, the sensor interrogation procedures, the conditions under which the monitoring will occur, the potential inspector population, adoption of CVM into an airline maintenance program and the document revisions necessary to allow for routine use of CVM as an alternate means of performing periodic structural inspects. To carry out the validation process, knowledge of aircraft maintenance practices was coupled with an unbiased, independent evaluation. Sandia Labs designed, implemented, and analyzed the results from a focused and statistically-relevant experimental effort to quantify the reliability of the CVM system applied to the Boeing 737 Wing Box fitting application. All factors that affect SHM sensitivity were included in this program: flaw size, shape, orientation and location relative to the sensors, as well as operational and environmental variables. Statistical methods were applied to performance data to derive Probability of Detection (POD) values for CVM sensors in a manner that agrees with current nondestructive inspection (NDI) validation requirements and also is acceptable to both the aviation industry and regulatory bodies. This report presents the use of several different statistical methods, some of them adapted from NDI performance assessments and some proposed to address the unique nature of damage detection via SHM systems, and discusses how they can converge to produce a confident quantification of SHM performance An important element in developing SHM validation processes is a clear understanding of the regulatory measures needed to adopt SHM solutions along with the knowledge of the structural and maintenance characteristics that may impact the operational performance of an SHM system. This report describes the major elements of an SHM validation approach and differentiates the SHM elements from those found in NDI validation. The activities conducted in this program demonstrated the feasibility of routine SHM usage in general and CVM in particular for the application selected. They also helped establish an optimum OEM-airline-regulator process and determined how to safely adopt SHM solutions. This formal SHM validation will allow aircraft manufacturers and airlines to confidently make informed decisions about the proper utilization of CVM technology. It will also streamline the regulatory actions and formal certification measures needed to assure the safe application of SHM solutions.

42 ENGINEERING↗
DOE OSTI2022

Application of Multi-Criteria Decision Analysis Techniques for Informing Select Agent Designation and Decision Making

The Centers for Disease Control and Prevention (CDC) Select Agent Program establishes a list of biological agents and toxins that potentially threaten public health and safety, the procedures governing the possession, utilization, and transfer of those agents, and training requirements for entities working with them. Every 2 years the Program reviews the select agent list, utilizing subject matter expert (SME) assessments to rank the agents. In this study, we explore the applicability of multi-criteria decision analysis (MCDA) techniques and logic tree analysis to support the CDC Select Agent Program biennial review process, applying the approach broadly to include non-select agents to evaluate its generality. We conducted a literature search for over 70 pathogens against 15 criteria for assessing public health and bioterrorism risk and documented the findings for archiving. The most prominent data gaps were found for aerosol stability and human infectious dose by inhalation and ingestion routes. Technical review of published data and associated scoring recommendations by pathogen-specific SMEs was found to be critical for accuracy, particularly for pathogens with very few known cases, or where proxy data (e.g., from animal models or similar organisms) were used to address data gaps. Analysis of results obtained from a two-dimensional plot of weighted scores for difficulty of attack (i.e., exposure and production criteria) vs. consequences of an attack (i.e., consequence and mitigation criteria) provided greater fidelity for understanding agent placement compared to a 1-to-n ranking and was used to define a region in the upper right-hand quadrant for identifying pathogens for consideration as select agents. A sensitivity analysis varied the numerical weights attributed to various properties of the pathogens to identify potential quantitative (x and y) thresholds for classifying select agents. The results indicate while there is some clustering of agent scores to suggest thresholds, there are still pathogens that score close to any threshold, suggesting that thresholding “by eye” may not be sufficient. The sensitivity analysis indicates quantitative thresholds are plausible, and there is good agreement of the analytical results with select agent designations. A second analytical approach that applied the data using a logic tree format to rule out pathogens for consideration as select agents arrived at similar conclusions.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1983

Simultaneous elastic and photoelastic calibration of birefringent orthotropic model materials

Transmission photoelastic analysis of composite models has been shown in recent years to be a viable stress analysis method for composite structures. However, difficulties in the fabrication of the model materials require the development of efficient mechanical and optical calibration procedures. In this paper, the methods for measuring elastic and photoelastic constants of composites are briefly reviewed. Then a new method, utilizing a relatively small calibration specimen, is described. In this method, electrical resistance strain gauges are mounted at selected points of a half-plane model and photoelastic measurements and strain readings are simultaneously taken. The data are processed by a least-squares procedure to yield the elastic and photoelastic constants. Comparison of results obtained by the proposed method with the results from conventional tests shows good agreement.

Prabhakaran, R.↗
NASA NTRS1992

Method of forming variable cross-sectional shaped three-dimensional fabrics

Method of weaving a variable cross-sectional shaped three-dimensional fabric which utilizes different weft yarn insertion from at least one side of the warp layers for selectively inserting weft yarns into different portions of the fabric cross-sectional profile defined by the warp yarn layers during the weaving process. If inserted from both sides of the warp yarn layers, the weft yarns may be inserted simultaneously or alternately from each side of the warp yarn layers. The vertical yarn is then inserted into the fabric by reciprocation of a plurality of harnesses which separate the vertical yarn into a plurality of vertical yarn systems as required by the shape of the three-dimensional fabric being formed.

Mohamed, Mansour H.↗
NASA NTRS2019

State Predictor of Classification Cognitive Engine Applied to Channel Fading

This study presents the application of machine learning (ML) to a space-to-ground communication link, showing how ML can be used to detect the presence of detrimental channel fading. Using this channel state information, the communication link can be used more efficiently by reducing the amount of lost data during fading. The motivation for this work is based on channel fading observed during on-orbit operations with NASA's Space Communication and Navigation (SCaN) testbed on the International Space Station (ISS). This paper presents the process to extract a target concept (fading and not-fading) from the raw data. The pre-processing and data exploration effort is explained in detail, with a list of assumptions made for parsing and labelling the dataset. The model selection process is explained, specifically emphasizing the benefits of using an ensemble of algorithms with majority voting for binary classification of the channel state. Experimental results are shown, highlighting how an end-to-end communication system can utilize knowledge of the channel fading status to identity fading and take appropriate action. With a laboratory testbed to emulate channel fading, the overall performance is compared to standard adaptive methods without fading knowledge, such as adaptive coding and modulation.

Fading↗
DOE OSTI2024

Mechanistically Informed Strategies for Site-Selective Atomic Layer Deposition

While atomic layer deposition (ALD) processes from across the periodic table have been designed to deposit conformal thin films, an atomistic view of disparate substrate sites reveals the possibility of even greater synthetic control and precision. An understanding of the mechanism by which a particular ALD precursor reacts (or does not react) at myriad surface sites remains in its infancy. Here, in this Perspective, we summarize site-specific chemical reaction strategies that utilize ALD precursors and tailored surface chemistry to discriminate among potential deposition sites as well as describe techniques and tools that can be used to investigate site-selective ALD (SS-ALD). The Perspective is focused on the science of site-selective vapor-phase surface reactions but inevitably reveals the potential utility of such surface synthetic precision.

36 MATERIALS SCIENCE↗
NASA NTRS1991

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 7:Summary report to phase 2 respondents including frequency distributions

Phase 2 of the four phase NASA/DoD Aerospace Knowledge Diffusion Research Project was undertaken to study the transfer of scientific and technical information (STI) from government to the aerospace industry and the role of librarians and technical information specialists in the transfer process. Data was collected through a self-administered mailback questionnaire. Libraries identified as holding substantial aerospace or aeronautical technical report collections were selected to receive the questionnaires. Within each library, the person responsible for the technical report was requested to answer the questionnaire. Questionnaires were returned from approx. 68 pct. of the libraries. The respondents indicated that scientists and engineer are not aware of the services available from libraries/technical information centers and that scientists and engineers also under-utilized their services. The respondents also indicated they should be more involved in the process.

Pinelli, Thomas E.↗
NASA NTRS2011

Thermal Energy for Lunar In Situ Resource Utilization: Technical Challenges and Technology Opportunities

Oxygen production from lunar raw materials is critical for sustaining a manned lunar base but is very power intensive. Solar concentrators are a well-developed technology for harnessing the Sun s energy to heat regolith to high temperatures (over 1375 K). The high temperature and potential material incompatibilities present numerous technical challenges. This study compares and contrasts different solar concentrator designs that have been developed, such as Cassegrains, offset parabolas, compound parabolic concentrators, and secondary concentrators. Differences between concentrators made from lenses and mirrors, and between rigid and flexible concentrators are also discussed. Possible substrate elements for a rigid mirror concentrator are selected and then compared, using the following (target) criteria: (low) coefficient of thermal expansion, (high) modulus of elasticity, and (low) density. Several potential lunar locations for solar concentrators are compared; environmental and processing-related challenges related to dust and optical surfaces are addressed. This brief technology survey examines various sources of thermal energy that can be utilized for materials processing on the lunar surface. These include heat from nuclear or electric sources and solar concentrators. Options for collecting and transporting thermal energy to processing reactors for each source are examined. Overall system requirements for each thermal source are compared and system limitations, such as maximum achievable temperature are discussed.

Gordon, Pierce E. C.↗
DOE OSTI2022

Catalyst and reactor design considerations for selective production of acids by oxidative cleavage of alkenes and unsaturated fatty acids with H 2 O 2

Oxidative cleavage of alkenes and unsaturated fatty acids with hydrogen peroxide gives an efficient and sustainable process to obtain mono- and di-acids for polymers and lubricants with fewer safety risks and less environmental impact than processes that utilize ozone or other inorganic oxidizers (e.g., permanganate, dichromate, etc.). Guided by insight into the mechanisms for competing reaction pathways (i.e., epoxidation of alkene on W–(η 2 -O 2 ) complexes vs. H 2 O 2 decomposition) and the apparent kinetics derived from kinetic experiments, here, we postulate that W-based heterogeneous catalysts can provide high performance and stable operations at low H 2 O 2 concentrations. Semi-batch reactors with continuous introduction of H 2 O 2 solutions offer the means to maintain low H 2 O 2 concentrations while providing sufficient quantities of H 2 O 2 to satisfy the reaction stoichiometry. We derived simple kinetic model equations for the epoxidation, ring-opening, oxidative cleavage, and oxidation steps and fit theses equations to batch experimental data to obtain kinetic parameters. Furthermore, this kinetic model describes the concentration profiles of reactant, oxidant, and products well as shown by agreement with experimental data. Further predictions of the optimal H 2 O 2 feed rate for semi-batch operation utilized by the proposed rate expressions and the reactor design equations suggest that low H 2 O 2 feed rate increases selectivity towards oxidative cleavage products and selective use of H 2 O 2 for oxidative cleavage pathway. Comparisons of oxidative cleavage of 4-octene in batch and semi-batch reactors show that semibatch reactors with optimized molar feed rates of H 2 O 2 increased oxidative cleavage product selectivities (76% to 99%; with an increase in butyric acid selectivity from 1% to 55%) and H 2 O 2 selectivity (3% to 30%). In addition, semibatch reaction conditions used avoid H 2 O 2 -mediated dissolution of W-atoms from the catalyst. Analysis of these findings suggest that solid oxide catalysts will be effective for continuous oxidative cleavage reactions if deployed within fixed-bed reactors that allow for distributed introduction of reactants and therefore low in situ concentrations of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Substrate Utilization and Competitive Interactions Among Soil Bacteria Vary With Life-History Strategies

Microorganisms have evolved various life-history strategies to survive fluctuating resource conditions in soils. However, it remains elusive how the life-history strategies of microorganisms influence their processing of organic carbon, which may affect microbial interactions and carbon cycling in soils. Here, we characterized the genomic traits, exometabolite profiles, and interactions of soil bacteria representing copiotrophic and oligotrophic strategists. Isolates were selected based on differences in ribosomal RNA operon ( rrn ) copy number, as a proxy for life-history strategies, with pairs of “high” and “low” rrn copy number isolates represented within the Micrococcales, Corynebacteriales, and Bacillales. We found that high rrn isolates consumed a greater diversity and amount of substrates than low rrn isolates in a defined growth medium containing common soil metabolites. We estimated overlap in substrate utilization profiles to predict the potential for resource competition and found that high rrn isolates tended to have a greater potential for competitive interactions. The predicted interactions positively correlated with the measured interactions that were dominated by negative interactions as determined through sequential growth experiments. This suggests that resource competition was a major force governing interactions among isolates, while cross-feeding of metabolic secretion likely contributed to the relatively rare positive interactions observed. By connecting bacterial life-history strategies, genomic features, and metabolism, our study advances the understanding of the links between bacterial community composition and the transformation of carbon in soils.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1989

PMR Graphite Engine Duct Development

The objective was to demonstrate the cost and weight advantages that could be obtained by utilizing the graphite/PMR15 material system to replace titanium in selected turbofan engine applications. The first component to be selected as a basis for evaluation was the outer bypass duct of the General Electric F404 engine. The operating environment of this duct was defined and then an extensive mechanical and physical property test program was conducted using material made by processing techniques which were also established by this program. Based on these properties, design concepts to fabricate a composite version of the duct were established and two complete ducts fabricated. One of these ducts was proof pressure tested and then run successfully on a factory test engine for over 1900 hours. The second duct was static tested to 210 percent design limit load without failure. An improved design was then developed which utilized integral composite end flanges. A complete duct was fabricated and successfully proof pressure tested. The net results of this effort showed that a composite version of the outer duct would be 14 percent lighter and 30 percent less expensive that the titanium duct. The other type of structure chosen for investigation was the F404 fan stator assembly, including the fan stator vanes. It was concluded that it was feasible to utilize composite materials for this type structure but that the requirements imposed by replacing an existing metal design resulted in an inefficient composite design. It was concluded that if composites were to be effectively used in this type structure, the design must be tailored for composite application from the outset.

Stotler, C. L.↗
DOE OSTI2021

Time-Resolved Observation of Hole Tunneling in van der Waals Multilayer Heterostructures

We reported a time-resolved study of quantum-mechanical tunneling of holes between two MoSe 2 monolayers that are separated by a monolayer WS 2 energy barrier. Four-layer heterostructures of MoSe 2 /WS 2 /MoSe 2 /graphene, as well as control samples, were fabricated by mechanical exfoliation and dry transfer techniques. To time-resolve the hole tunneling process, an ultrashort laser pulse was used to excite electrons and holes in both MoSe 2 layers. Here, by utilization of the graphene layer to eliminate carriers in the third MoSe 2 layer, the first MoSe 2 layer is selectively populated with the holes, which then tunnel to the third MoSe 2 layer. By monitoring decay of the hole population with an ultrashort probe pulse, we measure a hole tunneling time of about 20 ps, which is found to slightly increase with the injected carrier density. Besides the fundamental interests of real-time observation of the quantum-mechanical tunneling effect across a nanometer barrier, these results provide quantitative understanding on tunneling mechanisms of charge transfer in van der Waals heterostructures, which is useful for designing sophisticated van der Waals multilayer heterostructures.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Commercialization of materials processing in space

The primary motivation of the Materials Processing in Space program is the scientific and commercial utilization of the effects of the unique environments of space on material processes. The reduction or elimination of the pervasive influences of gravity on Earth-based process mechanisms affords opportunities for understanding and improving ground-based processing or producing select materials in space which, typically, would be of low volume, high value commercial interest. Additionally, the unlimited, if not 'hard' vacuum of space affords equally interesting influences on material processes. To evolve the commercialization of Materials Processing in Space, the program seeks to establish and demonstrate the scientific/technological precepts for analyzing and using the space environment and, in parallel, to establish the legal and management mechanisms to implement commercial ventures.

Zoller, L. K.↗