Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turbulence methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Analysis of the interaction of a weak normal shock wave with a turbulent boundary layer

The method of matched asymptotic expansions is used to analyze the interaction of a normal shock wave with an unseparated turbulent boundary layer on a flat surface at transonic speeds. The theory leads to a three-layer description of the interaction in the double limit of Reynolds number approaching infinity and Mach number approaching unity. The interaction involves an outer, inviscid rotational layer, a constant shear-stress wall layer, and a blending region between them. The pressure distribution is obtained from a numerical solution of the outer-layer equations by a mixed-flow relaxation procedure. An analytic solution for the skin friction is determined from the inner-layer equations. The significance of the mathematical model is discussed with reference to existing experimental data.

Melnik, R. E.↗
NASA NTRS2006

Stirling Analysis Comparison of Commercial VS. High-Order Methods

The conclusions are: Low Reynold s number, wall bounded flow allows economical use of large eddy simulation for turbulent transition modeling. UHF and Compact comparable at conjugate heat transfer. UHF much better for turbulence modeling Modern methods much more efficient than those currently available commercially.

Dyson, Rodger W.↗
NASA NTRS1977

Improved methods for large-eddy simulations of turbulence

By using Fourier transforms for evaluating spatial derivatives, the accuracy of the large-eddy simulation of homogeneous isotropic turbulence is improved. Especially, the treatment of certain terms that arise in filtering the equations is considerably improved in both speed and accuracy. Use of vorticity as the principal variable is shown to be a viable and potentially useful alternative to the primitive variables. A method of deriving conservation properties of numerical schemes is given which is much simpler than previous methods and is widely applicable. The methods are applied to the computation of homogeneous isotropic turbulence, and it is found that the subgrid scale model is improved by using finite differences in place of 'exact' derivatives.

Mansour, N. N.↗
NASA NTRS1978

Comparison of wing-span averaging effects on lift, rolling moment, and bending moment for two span load distributions and for two turbulence representations

An analytical method of computing the averaging effect of wing-span size on the loading of a wing induced by random turbulence was adapted for use on a digital electronic computer. The turbulence input was assumed to have a Dryden power spectral density. The computations were made for lift, rolling moment, and bending moment for two span load distributions, rectangular and elliptic. Data are presented to show the wing-span averaging effect for wing-span ratios encompassing current airplane sizes. The rectangular wing-span loading showed a slightly greater averaging effect than did the elliptic loading. In the frequency range most bothersome to airplane passengers, the wing-span averaging effect can reduce the normal lift load, and thus the acceleration, by about 7 percent for a typical medium-sized transport. Some calculations were made to evaluate the effect of using a Von Karman turbulence representation. These results showed that using the Von Karman representation generally resulted in a span averaging effect about 3 percent larger.

Lichtenstein, J. H.↗
NASA NTRS1989

Group-kinetic theory and modeling of atmospheric turbulence

A group kinetic method is developed for analyzing eddy transport properties and relaxation to equilibrium. The purpose is to derive the spectral structure of turbulence in incompressible and compressible media. Of particular interest are: direct and inverse cascade, boundary layer turbulence, Rossby wave turbulence, two phase turbulence; compressible turbulence, and soliton turbulence. Soliton turbulence can be found in large scale turbulence, turbulence connected with surface gravity waves and nonlinear propagation of acoustical and optical waves. By letting the pressure gradient represent the elementary interaction among fluid elements and by raising the Navier-Stokes equation to higher dimensionality, the master equation was obtained for the description of the microdynamical state of turbulence.

Tchen, C. M.↗
NASA NTRS1955

The Theories of Turbulence

The theory of turbulence reached its full growth at the end of the 19th century as a result of the work by Boussinesq and Reynolds. It then underwent a long period of stagnation which ended under the impulse given to it by the development of wind tunnels caused by the needs of aviation. Numerous researchers, attempted to put Reynolds' elementary statistical theory into a more precise form. During the war, some isolated scientists - von Weizsacker and Heisenberg in Germany, Kolmogoroff in Russia, Onsager in the U.S.A. - started a program of research. By a system of assumptions which make it possible to approach the structure of turbulence in well-defined limiting conditions quantitatively, they obtained a certain number of laws on the correlations and the spectrum. Since the late reports have improved the mathematical language of turbulence, it was deemed advisable to start with a detailed account of the mathematical methods applicable to turbulence, inspired at first by the work of the French school, above all for the basic principles, then the work of the foreigners, above all for the theory of the spectrum.

MECHANICS, STATISTICAL↗
NASA NTRS1991

Investigations of turbulent scalar fields using probability density function approach

Scalar fields undergoing random advection have attracted much attention from researchers in both the theoretical and practical sectors. Research interest spans from the study of the small scale structures of turbulent scalar fields to the modeling and simulations of turbulent reacting flows. The probability density function (PDF) method is an effective tool in the study of turbulent scalar fields, especially for those which involve chemical reactions. It has been argued that a one-point, joint PDF approach is the one to choose from among many simulation and closure methods for turbulent combustion and chemically reacting flows based on its practical feasibility in the foreseeable future for multiple reactants. Instead of the multi-point PDF, the joint PDF of a scalar and its gradient which represents the roles of both scalar and scalar diffusion is introduced. A proper closure model for the molecular diffusion term in the PDF equation is investigated. Another direction in this research is to study the mapping closure method that has been recently proposed to deal with the PDF's in turbulent fields. This method seems to have captured the physics correctly when applied to diffusion problems. However, if the turbulent stretching is included, the amplitude mapping has to be supplemented by either adjusting the parameters representing turbulent stretching at each time step or by introducing the coordinate mapping. This technique is still under development and seems to be quite promising. The final objective of this project is to understand some fundamental properties of the turbulent scalar fields and to develop practical numerical schemes that are capable of handling turbulent reacting flows.

Gao, Feng↗
NASA NTRS2018

Tetrahedral-Mesh Simulations of Shock-Turbulence Interaction

Despite decades of development of unstructured mesh methods, direct numerical simulations (DNS) of turbulent flows are still predominantly performed on structured or unstructured hexahedral meshes with high-order finite-difference methods, weighted essentially nonoscillatory (WENO) schemes, or hybrid schemes formed by their combinations. Tetrahedral meshes offer easy mesh generation and adaptation around complex geometries and the potential of an orientation-free grid that would benefit the isotropic nature of small-scale dissipation, as well as the solution accuracy of intermediate scales. To advance the state of the art of unstructured-mesh simulation capabilities for shock/turbulence interaction, DNS using pure tetrahedral meshes are carried out with the space-time conservation element, solution element (CESE) method in this research. By its design, the CESE method is constructed based on a non-dissipative scheme and is a genuinely multidimensional numerical framework that is free from the use of an approximate Riemann-solver. The numerical framework also provides the ability to add numerical dissipation (the nondissipative scheme acts as the reference state like that of the reversible state in thermodynamics) when needed (with justification from mathematics/physics). The above-mentioned features along with the CESE method's consistent shock-capturing approach and strong enforcement of flux conservation in spacetime offers a novel method to accurately simulate turbulent flows and their interaction with shocks using tetrahedral meshes. Two canonical problems, namely, isotropic turbulence interaction with a normal shock and a Mach 2.9 turbulent boundary layer flow over a 24deg compression corner are investigated in this study. Computational results show reasonably good agreement with experimental data and results from structured-mesh, high-order simulations available in the literature. Successful validation of these canonical problems demonstrated here paves the way for future high-fidelity supersonic flow simulations involving complex-geometries.

Venkatachari, Balaji Shankar↗
NASA NTRS1989

A comparison of radar measurements of atmospheric turbulence intensities by both C sub n sup 2 and spectral width methods

There are two main techniques by which turbulence intensities in the atmosphere can be measured by radars. One is to utilize the absolute backscattered power received by the radar, and use this to deduce C sub n sup 2 (refractivity turbulence structure constant). With appropriate assumptions, this parameter can then be converted to an energy dissipation rate. The second method utilizes the width of the spectrum of the signal received by the radar. Neither of these techniques have been used a great deal, and they have never been properly compared. Thus it was not possible to determine the validity of the assumptions made in applying each technique, nor was it possible to determine the limitations of each method. The first comparisons of the two techniques are presented. Measurements were made with the Adelaide VHF ST radar, and the results of the comparison are discussed.

Hocking, W. K.↗
NASA NTRS1975

Experimental and Theoretical Studies of Pulsating Turbulent Flow

The objective of this investigation was to study the effects of small amplitude sinusoidal pulsations on fully developed turbulent flow in a tube from both experimental and theoretical viewpoints. Theoretical models for the macroscopic behavior of pulsating turbulent tube flow were developed for the two cases of very low and very high pulsation frequencies. The models are based on assumptions of quasi-steady and frozen eddy viscosity flow behavior, respectively. The models successfully predict unsteady velocity profiles, thereby supporting the currently proposed definitions of frequency regimes in pulsating turbulent flow. Experimental measurements were made of the time-dependent pressure drop and velocity profiles over the range of frequency-to-Reynolds number ratios from 0.0095 to 0.24. The two macroscopic models developed in this study predict unsteady velocity profiles which are in moderately good agreement with the experiments in their respective frequency regimes, and a previously developed quasi-steady model is found to predict experimental velocity profiles well in both the quasisteady and the frozen eddy viscosity frequency regimes. The effect of flow pulsations on the dissipation of turbulence energy in the vicinity of the wall was measured in the lower transition frequency regime. The long-time averaged dissipation was observed to be unchanged from the steady flow dissipation, within the accuracy of the experiment. A theoretical model of the periodic viscous sublayer was also developed and applied to pulsating flow in a tube, in order to investigate the effects of flow pulsations on the rate of production of turbulence in the region of the wall. The periodic viscous sublayer model predicts sublayer growth periods in steady flow which agree with the published experimental data. When the model is applied to pulsating flow, the response of the sublayer growth period falls into three frequency regimes, the parameters of which are in approximate agreement with the frequency regimes which are defined on the basis of macroscopic flow behavior. The sublayer renewal cycle exhibits quasi-steady flow behavior when the sublayer growth period is much less than the pulsation period, transition behavior when these two periods are approximately equal, and frozen eddy viscosity behavior when the sublayer period is much longer than the pulsation period. The effect of the sublayer growth and renewal cycle on the level of turbulence was investigated by two methods. The velocity fluctuations seen by a point velocity probe located close to the wall were predicted from the model in one method and the rate of turbulence production was estimated from the frequency of sublayer renewal events in the other.

Kingston, G. C.↗
NASA NTRS1981

Performance of wind turbines in a turbulent atmosphere

The effect of atmospheric turbulence on the power fluctuations of large wind turbines was studied. The significance of spatial non-uniformities of the wind is emphasized. The turbulent wind with correlation in time and space is simulated on the computer by Shinozukas method. The wind turbulence is modelled according to the Davenport spectrum with an exponential spatial correlation function. The rotor aerodynamics is modelled by simple blade element theory. Comparison of the spectrum of power output signal between 1-D and 3-D turbulence, shows the significant power fluctuations centered around the blade passage frequency.

Sundar, R. M.↗
NASA NTRS1994

Computation of turbulent boundary layers employing the defect wall-function method

In order to decrease overall computational time requirements of spatially-marching parabolized Navier-Stokes finite-difference computer code when applied to turbulent fluid flow, a wall-function methodology, originally proposed by R. Barnwell, was implemented. This numerical effort increases computational speed and calculates reasonably accurate wall shear stress spatial distributions and boundary-layer profiles. Since the wall shear stress is analytically determined from the wall-function model, the computational grid near the wall is not required to spatially resolve the laminar-viscous sublayer. Consequently, a substantially increased computational integration step size is achieved resulting in a considerable decrease in net computational time. This wall-function technique is demonstrated for adiabatic flat plate test cases from Mach 2 to Mach 8. These test cases are analytically verified employing: (1) Eckert reference method solutions, (2) experimental turbulent boundary-layer data of Mabey, and (3) finite-difference computational code solutions with fully resolved laminar-viscous sublayers. Additionally, results have been obtained for two pressure-gradient cases: (1) an adiabatic expansion corner and (2) an adiabatic compression corner.

Brown, Douglas L.↗
NASA NTRS1977

Calculation of laminar and turbulent boundary layers for two-dimensional time-dependent flows

A general method for computing laminar and turbulent boundary layers for two-dimensional time-dependent flows is presented. The method uses an eddy-viscosity formulation to model the Reynolds shear-stress term and a very efficient numerical method to solve the governing equations. The model was applied to steady two-dimensional and three-dimensional flows and was shown to give good results. A discussion of the numerical method and the results obtained by the present method for both laminar and turbulent flows are discussed. Based on these results, the method is efficient and suitable for solving time-dependent laminar and turbulent boundary layers.

Cebeci, T.↗
NASA NTRS1976

Inverse transonic airfoil design including viscous interaction

A numerical technique was developed for the analysis of specified transonic airfoils or for the design of airfoils having a prescribed pressure distribution, including the effect of weak viscous interaction. The method uses the full potential equation, a stretched Cartesian coordinate system, and the Nash-MacDonald turbulent boundary layer method. Comparisons with experimental data for typical transonic airfoils show excellent agreement. An example shows the application of the method to design a thick aft-cambered airfoil, and the effects of viscous interaction on its performance are discussed.

Carlson, L. A.↗
NASA NTRS1990

Viscous drag reduction in boundary layers

The present volume discusses the development status of stability theory for laminar flow control design, applied aspects of laminar-flow technology, transition delays using compliant walls, the application of CFD to skin friction drag-reduction, active-wave control of boundary-layer transitions, and such passive turbulent-drag reduction methods as outer-layer manipulators and complex-curvature concepts. Also treated are such active turbulent drag-reduction technique applications as those pertinent to MHD flow drag reduction, as well as drag reduction in liquid boundary layers by gas injection, drag reduction by means of polymers and surfactants, drag reduction by particle addition, viscous drag reduction via surface mass injection, and interactive wall-turbulence control.

Bushnell, Dennis M.↗
NASA NTRS2017

Development of an Axisymmetric Afterbody Test Case for Turbulent Flow Separation Validation

As identified in the CFD Vision 2030 Study commissioned by NASA, validation of advanced RANS models and scale-resolving methods for computing turbulent flows must be supported by improvements in high-quality experiments designed specifically for CFD implementation. A new test platform referred to as the Axisymmetric Afterbody allows for a range of flow behaviors to be studied on interchangeable afterbodies while facilitating access to higher Reynolds number facilities. A priori RANS computations are reported for a risk-reduction configuration to demonstrate critical variation among turbulence model results for a given afterbody, ranging from barely-attached to mild separated flow. The effects of body nose geometry and tunnel-wall boundary condition on the computed afterbody flow are explored to inform the design of an experimental test program.

Disotell, Kevin J.↗
NASA NTRS2013

Verification and Validation Studies for the LAVA CFD Solver

The verification and validation of the Launch Ascent and Vehicle Aerodynamics (LAVA) computational fluid dynamics (CFD) solver is presented. A modern strategy for verification and validation is described incorporating verification tests, validation benchmarks, continuous integration and version control methods for automated testing in a collaborative development environment. The purpose of the approach is to integrate the verification and validation process into the development of the solver and improve productivity. This paper uses the Method of Manufactured Solutions (MMS) for the verification of 2D Euler equations, 3D Navier-Stokes equations as well as turbulence models. A method for systematic refinement of unstructured grids is also presented. Verification using inviscid vortex propagation and flow over a flat plate is highlighted. Simulation results using laminar and turbulent flow past a NACA 0012 airfoil and ONERA M6 wing are validated against experimental and numerical data.

Validation↗