Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Rapid Load Transition for Integrated Solid Oxide Fuel Cell - Gas Turbine (SOFC-GT) Energy Systems: A Demonstration of the Potential for Grid Response

Rapid load transition is an essential requirement for integrated energy systems to maintain grid resilience as more renewable resources are added to the grid. Integrated solid oxide fuel cell - gas turbine (SOFC-GT) systems can provide high efficiency and low carbon emissions over a broad range of turndown. These hybrids also have the potential to enable rapid grid response. The challenge has been to demonstrate effective control strategies to manage load transitions. In the present study, a load transition of ~50% was achieved in 10 s using a novel but simple strategy. Power demand on the SOFC and the GT were ramped down concurrently. During this transition, the SOFC anode fuel was manipulated to maintain SOFC fuel utilization while the cathode inlet air flow and temperature were also manipulated to thermally protect the SOFC. This study was conducted using the Hybrid Performance (Hyper) facility at the National Energy Technology Laboratory (NETL) in a co-simulation environment with the Idaho National Laboratory (INL)'s grid-simulation. The load ramping strategy was tested using a hardware-based cyber-physical simulation methodology. The results demonstrate a high-fidelity representation of SOFC-GT hybrid dynamics and validation of the control strategy. Thermal and electrochemical transients indicated that the SOFC was well protected during rapid load turndown without violating operability constraints. This demonstration revealed the non-linear nature of tightly coupled SOFC-GT system components, especially the non-linear response of SOFC cathode air flow and inlet temperature controls. These results highlight the needs and challenges in developing adaptive automatic controls for autonomous rapid load transitions. This work demonstrates that SOFC-GT hybrids are a viable option to provide the fast-ramping characteristics essential to accommodate high levels of variable renewable power while maintaining grid resilience, reliability, and environmental performance. The results also demonstrate the utility of co-simulation in advancing the tightly-coupled integrated energy systems needed to meet goals for zero-carbon power generation.

DIRECT ENERGY CONVERSION,POWER TRANSMISSION AND DI↗
DOE OSTI2020

A simple and effective five-equation two-phase numerical model for liquid-vapor phase transition in cavitating flows

Numerical difficulties, notably the non-monotonic behavior of the Wood speed of sound and the volume fraction positivity, associated with the reduced five-equation two-phase flow model of Kapila et al. (2001) [A.K. Kapila, R. Menikoff, J.B. Bdzil, S.F. Son, D.S. Stewart, 2001. Two-phase modeling of deflagration-to-detonation transition in granular materials: reduced equations, Physics of Fluids 13(10), 3002–3024] have been resolved in the past through the introduction of a frozen speed of sound and an algebraic approach for mechanical relaxation afforded by a pressure non-equilibrium six-equation model proposed by [R. Saurel, F. Petitpas, R.A. Berry, 2009. Simple and efficient relaxation methods for interfaces separating compressible fluids, cavitating flows and shocks in multiphase mixture, J. Comput. Phys. 228, 1678–1712]. By contrast, it is explored and demonstrated in this work that these difficulties can in fact still be resolved within the numerical scheme for solving the reduced five-equation model by numerically replacing the Wood speed of sound for the estimates of wave speeds in the approximate Riemann solver HLLC with the monotonic mixture speed of sound for a transport five-equation model. For shock interface (artificial mixture separating pure or nearly pure fluids) interaction problems, with the apparent advantage of monotonic behavior of the speed of sound in the interface, the effect of the numerical replacement is also confined to the interface. Differences other than the behavior of the speed of sound within the interface in the solutions due to the replacement diminish with increasing resolution when reasonable solution can be obtained with Wood speed of sound. For cavitating/expansion problems in physical fluid mixture, it is pointed out and explained why acoustics in the numerical solutions still propagate at the Wood speed of sound (therefore consistent with the reduced five-equation model) even though in some cases a much higher speed of sound like the numerical replacement above for solving the reduced five-equation model or the frozen speed of sound for solving a six-equation model is used for the estimates of wave speeds in the HLLC scheme. A variant of the five-equation two-phase flow model by Saurel et al. (2008) [R. Saurel, F. Petitpas, R. Abgrall, 2008. Modelling phase transition in metastable liquids: application to cavitating and flashing flows, J. Fluid Mech. 607, 313–350] is then constructed for liquid-vapor phase transition in cavitating flows. The relaxation toward thermo-chemical equilibrium during phase transition is achieved by solving a simple system of algebraic equations for the equilibrium state variables for better efficiency, following Pelanti and Shyue (2014) [M. Pelanti, K.-M. Shyue, 2014. A mixture-energy-consistent six-equation two-phase numerical model for fluid with interfaces, cavitation and evaporation waves. J. Comput. Phys. 259, 331–357]. Therefore, the current model retains both the simplicity afforded by the five-equation model and the efficiency of the algebraic relaxation solver. An alternative algebraic approach for handling the non-conservative term (the so-called K∇ · u term) in the reduced five-equation model for mechanical equilibrium of a liquid-vapor mixture is also explored by enforcing the thermal equilibrium at the same time. Finally, numerical results of sample tests in both one and two dimensions in the literature as well as that in three dimensions demonstrate the effectiveness and ability of the proposed model to simulate cavitating flows. An interesting mechanism of shock generation by acoustics in water due to phase transition is then found by the numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Unraveling transition-metal-mediated stability of spinel oxide via in situ neutron scattering

The energy materials performance is intrinsically determined by structures from the average lattice structure to the atom arrangement, valence, and distribution of the containing transition metal (TM) elements. Understanding the mechanism of the structure transition and atom rearrangement via synthesis or processing is key to expediting the exploration of excellent energy materials. In this work, in situ neutron scattering is employed to reveal the real-time structure evolution, including the TM-O bonds, lattice, TM valence and the migration of the high-voltage spinel cathode LiNi 0.5 Mn 1.5 O 4 . The transition-metal-mediated spinel destabilization under the annealing at the oxygen-deficient atmosphere is pinpointed. Additionally, the formation of Mn 3+ is correlated to the TM migration activation, TM disordered rearrangement in the spinel, and the transition to a layered-rocksalt phase. The further TM interdiffusion and Mn 2+ reduction are also revealed with multi-stage thermodynamics and kinetics. The mechanisms of phase transition and atom migrations as functions of temperature, time and atmosphere present important guidance on the synthesis in various-valence element containing oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Evidence of a glassy magnetic transition driven by structural disorder in BiFeO 3 nanoparticles

Important effects appear in low and high temperature magnetometry of multiferroic BiFeO 3 (BFO) nanoparticles as sizes are reduced from 105 nm to 18 nm. In these particles, a magnetic transition appears close to 200 K probably associated with a spin reorientation which is absent in bigger particles. At higher temperatures and up to the bulk ferroelectric Curie temperature (1000 K), two additional magnetic transitions can be identified. Around T N 600 K, a size-dependent magnetic transition appears, associated with an antiferromagnetic transition. A model based on atomic vibration instability can describe the variation of T N with nanoparticle size. Furthermore, for certain sizes, the properties are dominated by the glassy state arising from the disorder produced by the formation of a core-shell structure. This implies that the magnetic behavior of nanoparticles is strongly affected by their crystal structure close to the transition temperature. Finally, the structural disorder which couples to the magnetic properties add control to the magnetic and ferroelectric properties of BFO nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Photoinduced reversible phase transition in a phenothiazine-based metal-organic framework

Photoinduced phase transitions in metal-organic frameworks are provoked by structural changes of photoresponsive linkers within the framework under light irradiation. These transitions are rare but fundamentally important as they can bring about light-switchability on a variety of properties of the materials. In this work, phenothiazine as a photoresponsive unit with distinctive photochemical properties is incorporated into a Zn-based metal-organic framework, PCN-401. The structural characterization of PCN-401 revealed a reversible structural transition upon light irradiation. The mechanisms behind the photoinduced phase transition are studied systematically by spectrometric methods and structural stability characterization. Our mechanistic studies successfully showcased how the phenothiazine unit in the framework undergoes structural transformation under light irradiation and how the reversible phase transition leads to the property changes. The findings have emphasized the significance of phenothiazine in photoresponsive materials and can serve as inspiration for the design and understandings of next-generation photoresponsive metal-organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structural Phase Transitions in the van der Waals Ferromagnets Fe x Pd y Te 2

Two-dimensional van der Waals (vdW) magnets are attracting significant attention, both as platforms for studying fundamental magnetic interactions and for the exciting possibility of utilizing them as building blocks in devices and heterostructures, which may lead to new physical phenomena and functionalities. Here, we provide a detailed study of the crystal structure and physical properties of the recently discovered vdW ferromagnet FePd 2 Te 2 . We find this compound has a relatively wide width of formation, and grow single crystals with compositions Fe x Pd y Te 2 where x ranges from 0.9 to 1.1 and y from 1.8 to 2.5, respectively. Temperature-dependent X-ray diffraction and transport measurements reveal that a first-order structural transition occurs in the range of T = 360–420 K, where the critical temperature, modulation wave vector, and corresponding room-temperature crystal structures all depend on chemical composition. Above the transition, the compounds with Pd fraction y > 2 adopt a disordered derivative of the tetragonal FeTe structure, with the Fe layer showing mixed Fe/Pd occupancy and the extra Pd atoms partially occupying interstitial sites. Below 370 K, the structure is incommensurately modulated, likely associated with the complex ordering of Pd/Fe atoms in the metal layers or the interstitial Pd in the vdW gaps. For y < 2, the composition Fe 1.1 Pd 1.8 Te 2 has monoclinic symmetry at room temperature that is consistent with the reported structure of FePd 2 Te 2 . This phase undergoes a structural transition at 420 K for which the high temperature structure is yet to be determined; however, based on the similarities with the y > 2 compounds, we speculate that its T > 420 K structure is also tetragonal. Importantly, the high temperature, symmetry-breaking structural transition observed here provides a likely explanation for the origin of the structural domains previously observed in FePd 2 Te 2 . All compounds investigated in the Fe x Pd y Te 2 series show metallic behavior, with magnetic characterization indicating that they are easy-plane, hard, ferromagnets with T C spanning 98–180 K. Both the critical temperature for the structural transition and the Curie temperature are moderately suppressed with increasing Pd fraction y and corresponding decreasing Fe fraction x, indicating that synthetic control over x and y paves way for the further exploration of these compounds.

crystal structure↗
DOE OSTI2022

Controlling the Phase Transition in CsPbI 3 Nanowires

Cesium lead iodide (CsPbI 3 ) is a promising semiconductor with a suitable band gap for optoelectronic devices. CsPbI 3 has a metastable perovskite phase that undergoes a phase transition into an unfavorable nonperovskite phase in an ambient environment. This phase transition changes the optoelectronic properties of CsPbI 3 and hinders its potential for device applications. Therefore, it is of central importance to understand the kinetics of such instability and develop strategies to control and stabilize the perovskite phase. Here, we use ultralong CsPbI 3 nanowires as a model platform to investigate the phase transition kinetics. Our results depict the role of environmental stressors (moisture and temperature) in controlling the phase transition dynamics of CsPbI 3 , which can serve as guiding principles for future phase transition studies and the design of related photovoltaics. Furthermore, we demonstrate the controllability of phase propagation on individual nanowires by varying the moisture level and temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanoscale Tracking of the High-Temperature Spin-State Transition in LaCoO 3

The high-temperature spin and electronic transitions in LaCoO 3 have recently been leveraged to create neuromorphic (brain-inspired) devices. While these devices have shown the potential for impactful functionality in next-generation computing systems, the nanoscale dynamics of the spin and electronic transitions that underlie their operation are not well understood. Inhomogeneities related to interfaces, electrode contacts, strain, and crystal defects can all affect device performance, making nanoscale characterization of the transitions essential for producing consistent and reliable devices. Here, we demonstrate the first nanoscale in situ measurement of the spin transition in LaCoO 3 at device-relevant temperatures (25–325 °C) over length scales of tens of nanometers using STEM-EELS. This measurement is enabled by an Al 2 O 3 coating, which prevents unwanted reduction of the LaCoO 3 specimen at high temperature and vacuum. The detailed understanding of LaCoO 3 transition dynamics enabled by such measurements will be crucial for optimizing LaCoO 3 -based neuromorphic devices and increasing reliability for real-world application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Precursor region with full phonon softening above the charge-density-wave phase transition in 2 H -TaSe 2

Research on charge-density-wave (CDW) ordered transition-metal dichalcogenides continues to unravel new states of quantum matter correlated to the intertwined lattice and electronic degrees of freedom. Here, we report an inelastic x-ray scattering investigation of the lattice dynamics of the canonical CDW compound 2H-TaSe 2 complemented by angle-resolved photoemission spectroscopy and density functional perturbation theory. Our results rule out the formation of a central-peak without full phonon softening for the CDW transition in 2H-TaSe 2 and provide evidence for a novel precursor region above the CDW transition temperature T CDW , which is characterized by an overdamped phonon mode and not detectable in our photoemission experiments. Thus, 2H-TaSe 2 exhibits structural before electronic static order and emphasizes the important lattice contribution to CDW transitions. Our ab-initio calculations explain the interplay of electron-phonon coupling and Fermi surface topology triggering the CDW phase transition and predict that the CDW soft phonon mode promotes emergent superconductivity near the pressure-driven CDW quantum critical point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Temperature-independent giant dielectric response in transitional BaTiO 3 thin films

Ferroelectric materials exhibit the largest dielectric permittivities and piezoelectric responses in nature, making them invaluable in applications from supercapacitors or sensors to actuators or electromechanical transducers. The origin of this behavior is their proximity to phase transitions. However, the largest possible responses are most often not utilized due to the impracticality of using temperature as a control parameter and to operate at phase transitions. This has motivated the design of solid solutions with morphotropic phase boundaries between different polar phases that are tuned by composition and that are weakly dependent on temperature. Thus far, the best piezoelectrics have been achieved in materials with intermediate (bridging or adaptive) phases. But so far, complex chemistry or an intricate microstructure has been required to achieve temperature-independent phase-transition boundaries. Here, we report such a temperature-independent bridging state in thin films of chemically simple BaTiO3. A coexistence among tetragonal, orthorhombic, and their bridging low-symmetry phases are shown to induce continuous vertical polarization rotation, which recreates a smear in-transition state and leads to a giant temperature-independent dielectric response. The current material contains a ferroelectric state that is distinct from those at morphotropic phase boundaries and cannot be considered as ferroelectric crystals. We believe that other materials can be engineered in a similar way to contain a ferroelectric state with gradual change of structure, forming a class of transitional ferroelectrics. Similar mechanisms could be utilized in other materials to design low-power ferroelectrics, piezoelectrics, dielectrics, or shape-memory alloys, as well as efficient electro- and magnetocalorics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pressure-induced phase transition in barium hydride studied with neutron scattering

Barium hydride can undergo a structural phase transition from an orthorhombic phase to a hexagonal phase induced by high temperature or high pressure. This transition causes an immediate increase in the hydrogen diffusion rates by over an order of magnitude, and therefore, understanding the origin and details of such transition is of great interest not only for fundamental reasons but also for improving materials for future applications. In this work, the pressure evolution of the crystal structure was characterized using neutron powder diffraction up to a maximum pressure of 11.3 GPa. The pressure dependence of the unit cell volumes, lattice parameters, atomic sites, and compressibilities were determined for both phases. A structural phase transition occurred over a wide pressure range of P = 1.3 GPa–4.9 GPa. The transition to the higher density hexagonal phase reduced the volume per formula unit of BaD 2 by 13.6%, hence increasing the volumetric storage density. In addition, we investigated the hydrogen diffusion process using high pressure quasi-elastic neutron scattering up to 7.1 GPa. Our results show that the hydrogen mobility increases with pressure in the hexagonal phase. This work sheds light on the structural and dynamical aspects of barium hydride caused by the application of high pressure. Finally, the results may aid in the development of advanced metal hydride systems with increased hydrogen dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Experimental equation of state of 11 lanthanide nitrides (NdN to LuN) and pressure induced phase transitions in NdN, SmN, EuN, and GdN

Through an extensive data analysis of powder X-ray diffraction data obtained at pressures up to at least 78 GPa, we report the experimental equations of state for all lanthanide nitrides between NdN and LuN, excluding the radioactive Pm. By fitting the obtained unit cell volumes as a function of pressure with the third order Birch–Murnaghan equation of state, we find that the bulk modulus increases with an increasing lanthanide number from K 0 = 146(12) GPa for NdN to 182(7) GPa in EuN. Hereafter, the bulk modulus reaches a plateau for the rest of the series except for TmN which has a lower bulk modulus. We find that the first derivative of the bulk modulus is around 4 for all compounds except TbN, which displays a significantly different compression behavior. In addition, we find a B1 to B10 pressure-induced phase transition in NdN, SmN, EuN, and GdN at increasingly higher pressures. In fact, we observe that the onset pressure of the phase transition increases linearly with Ln atomic number. From TbN and onwards, we do not observe any sign of a B1 to B10 transition indicating that the transition pressure exceeds the studied pressure range. Therefore, we believe that, for the heavier lanthanides, the linear relationship between the onset pressure and the lanthanide number does not hold and even higher pressures are needed to observe the transition. This coherent study of the series of lanthanide nitrides offers a unique opportunity for benchmark studies of computational methods applied to compounds with 4f electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Magnetic imaging and statistical analysis of the metamagnetic phase transition of FeRh with electron spins in diamond

Magnetic imaging based on nitrogen-vacancy (NV) centers in diamond has emerged as a powerful tool for probing magnetic phenomena in fields ranging from biology to physics. A key strength of NV sensing is its local-probe nature, enabling high-resolution spatial images of magnetic stray fields emanating from a sample. However, this local character can also form a drawback for analyzing the global properties of a system, such as a phase transition temperature. Here, we address this challenge by using statistical analyses of magnetic-field maps to characterize the first-order temperature-driven metamagnetic phase transition from the antiferromagnetic to the ferromagnetic state in FeRh. After imaging the phase transition and identifying the regimes of nucleation, growth, and coalescence of ferromagnetic domains, we statistically characterize the spatial magnetic-field maps to extract the transition temperature and thermal hysteresis width. By analyzing the spatial correlations of the maps in relation to the magnetocrystalline anisotropy and external magnetic field, we detect a reorientation of domain walls across the phase transition. The employed statistical approach can be extended to the study of other magnetic phenomena with NV magnetometry or other sensing techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Real-space visualization of a defect-mediated charge density wave transition

Here, we study the coupled charge density wave (CDW) and insulator-to-metal transitions in the 2D quantum material 1T-TaS 2 . By applying in situ cryogenic 4D scanning transmission electron microscopy with in situ electrical resistance measurements, we directly visualize the CDW transition and establish that the transition is mediated by basal dislocations (stacking solitons). We find that dislocations can both nucleate and pin the transition and locally alter the transition temperature T c by nearly ~75 K. This finding was enabled by the application of unsupervised machine learning to cluster five-dimensional, terabyte scale datasets, which demonstrate a one-to-one correlation between resistance—a global property—and local CDW domain-dislocation dynamics, thereby linking the material microstructure to device properties. This work represents a major step toward defect-engineering of quantum materials, which will become increasingly important as we aim to utilize such materials in real devices.

4D-STEM↗
DOE OSTI2026

Predicting Atomistic Transitions with Transformers

Accurate knowledge of the atomistic transition pathways in materials and material surfaces is crucial for many material science problems. However, conventional simulation techniques used to find these transitions are extremely computationally intensive. Even with large-scale, accelerated material simulations, the computational cost constrains the applicable domain in practice. Machine learning models, with the potential to learn the complex emergent behaviors governing atomistic transitions as a fast surrogate model, have great promise to predict transitions with a vastly reduced computational cost. Here, we demonstrate how transformers can be trained to predict atomistic transitions in nano-clusters. We show how we evaluate physical validity of the predictions and how a multitude of additional, different microstates can be generated by slightly varying the data provided to the model.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Accurate CI-MBPT calculation of radiative lifetimes and transition probabilities of neutral lanthanum (La I) odd states with J = 3/2

In this work, an accurate calculation of radiative lifetimes and transition probabilities of the first 21 odd states with a total angular momentum J = 3/2 was performed for La I using configuration-interaction many-body perturbation theory (CI-MBPT). A technique to obtain correct transition amplitudes was devised for pairs of states with substantial mixing that improved the theoretical accuracy. The results were compared to known experimental and theoretical data for the considered transitions. It has been shown that the transition data calculated with CI-MBPT and with corrections for pairs of mixed states are in good agreement with the latest experimental data of Den Hartog et al, 2015 J. Phys. B: At. Mol. Phys. 48, 155 001, better than other theoretical results. The transition data can find many applications in astrophysics, and the CI-MBPT formalism with mixing correction is applicable to other atoms similar to or more complex than La I.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controllable superconducting to semiconducting phase transition in topological superconductor 2M-WS 2

The investigation of exotic properties in two-dimensional (2D) topological superconductors has garnered increasing attention in condensed matter physics, particularly for applications in topological qubits. Despite this interest, a reliable way of fabricating topological Josephson junctions (JJs) utilizing topological superconductors has yet to be demonstrated. Controllable structural phase transition presents a unique approach to achieving topological JJs in atomically thin 2D topological superconductors. In this work, we report the pioneering demonstration of a structural phase transition from the superconducting to the semiconducting phase in the 2D topological superconductor 2M-WS 2 . We reveal that the metastable 2M phase of WS 2 remains stable in ambient conditions but transitions to the 2H phase when subjected to temperatures above 150°C. We further locally induced the 2H phase within 2M-WS 2 nanolayers using laser irradiation. Notably, the 2H phase region exhibits a hexagonal shape, and scanning tunneling microscopy (STM) uncovers an atomically sharp crystal structural transition between the 2H and 2M phase regions. Moreover, the 2M to 2H phase transition can be induced at the nanometer scale by a 200 keV electron beam. The electrical transport measurements further confirmed the superconductivity of the pristine 2M-WS 2 and the semiconducting behavior of the laser-irradiated 2M-WS 2 . Furthermore, our results establish a novel approach for controllable topological phase change in 2D topological superconductors, significantly impacting the development of atomically scaled planar topological JJs.

2D materials↗
DOE OSTI2023

Turbulence and E × B flow correlations across the L-H transition in DIII-D deuterium and hydrogen plasmas

The isotope dependence of the low- to high confinement-mode (L- to H-mode) transition power threshold P LH presents significant challenges for the initial (non-nuclear) hydrogen operations phase of the international thermonuclear experimental reactor (ITER). Here, we examine the isotope dependence of turbulence and E × B flow correlation properties in the L-mode edge plasma, leading up to the L-H transition. At marginal auxiliary power (near P LH ), turbulence is initially suppressed periodically during limit cycle oscillations (LCO) that precede the transition to sustained H-mode confinement. Here, we present evidence that the long-range (toroidal) correlation of the E × B edge plasma flow across the LCO phase is much weaker in hydrogen than in deuterium in the DIII-D tokamak, congruent with the higher threshold power P LH required to access LCO and H-mode in hydrogen. Concomitantly, the time required to initially quench edge turbulence via localized edge E × B flow shear is significantly longer in hydrogen (1–1.5 ms) than in deuterium (approx. 100 µs). No toroidal long-range correlation of the turbulence amplitude is observed, in agreement with expectations based on the relatively short poloidal turbulence correlation length. Radial edge turbulence and flow correlation lengths are longer in deuterium than in hydrogen plasmas as one would expect from ‘naïve’ gyro-Bohm isotope transport scaling, despite the substantially higher thermal flux across the last closed flux surface in hydrogen before the L-H transition. This article is part of a discussion meeting issue 'H-mode transition and pedestal studies in fusion plasmas'.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗