Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Understanding the structure–property relationships of the ferroelectric to relaxor transition of the (1-x)BaTiO3–(x)BiInO3 lead-free piezoelectric system

A structural and electromechanical investigation has been performed on (1-x)BaTiO 3 –(x)BiInO 3 in the region 0.03 ≤ x ≤ 0.12. A gradual structural phase transition has been observed where the structure changes from tetragonal (P4mm) and passes through two regions of coexisting phases: (1) P4mm + R3m in the range 0.03 ≤ x ≤ 0.075 and (2) Pm$\bar{3}$m + R3m for 0.10 ≤ x ≤ 0.12. The properties also transition from ferroelectric (x ≤ 0.03) to relaxor ferroelectric (x ≥ 0.05) as the dielectric permittivity maximum becomes temperature and frequency dependent. This transition was also confirmed via polarization-electric field measurements as well as strain-electric field measurements. At the critical composition of x = 0.065, a moderate strain of ~0.104% and an effective piezoelectric coefficient (d$*\atop{33}$) of 260 pm/V were observed. Finally, the original purpose of this study was to demonstrate the polarization extension mechanism as predicted in the literature, but due to the ferroelectric to relaxor transition, this mechanism was not found to be present in this system. However, this demonstrates that BaTiO 3 -based lead-free ceramics could be modified to obtain enhanced electromechanical properties for actuator applications.

36 MATERIALS SCIENCE↗

Study of Surface Roughness Effect on Super–Normal Transition of Ti/Au Transition Edge Sensor Calorimeters

We are developing transition edge sensor (TES) X-ray microcalorimeters for the future Japanese mission DIOS. It adopts microstrip readout wiring for low pixel-to-pixel crosstalk. In past samples, TES films composed of Ti and Au have not shown proper super–normal transition when it is deposited on the wiring. Assuming that surface roughness of the substrate can influence the transition, we reduced the surface roughness of the underneath layer before deposition of the TES film by using chemical mechanical polishing. We then found that the substrate becomes much smoother with a roughness of <1 nm rms and the TES film shows a proper transition.

36 MATERIALS SCIENCE↗

The Superconductor-Superinsulator Transition: S-duality and the QCD on the Desktop

We show that the nature of quantum phases around the superconductor-insulator transition (SIT) is controlled by charge-vortex topological interactions, and does not depend on the details of material parameters and disorder. We find three distinct phases, superconductor, superinsulator, and bosonic topological insulator. The superinsulator is a state of matter with infinite resistance in a finite temperature range, which is the S-dual of the superconductor and in which charge transport is prevented by electric strings binding charges of opposite sign. The electric strings ensuring linear confinement of charges are generated by instantons and are dual to superconducting Abrikosov vortices. Material parameters and disorder enter the London penetration depth of the superconductor, the string tension of the superinsulator and the quantum fluctuation parameter driving the transition between them. They are entirely encoded in four phenomenological parameters of a topological gauge theory of the SIT. Finally, we point out that, in the context of strong coupling gauge theories, the many-body localization phenomenon that is often referred to as an underlying mechanism for superinsulation is a mere transcription of the well-known phenomenon of confinement into solid-state physics language and is entirely driven by endogenous disorder embodied by instantons with no need of exogenous disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relativistic distorted-wave collision strengths and oscillator strengths for the 185Δn=0 transitions with n=2 in the 67 C-like ions with 26≤Z≤92

Relativistic distorted-wave collision strengths have been calculated for the 185 Δn=0 transitions with n=2 in the 67 C-like ions with nuclear charge number Z in the range 26≤Z≤92. The calculations were made for the six final, or scattered, electron energies E{sup ′}=0.03,0.08,0.20,0.42,0.80, and 1.40, where E{sup ′} is in units of Z{sub eff}{sup 2} Ry with Z{sub eff}=Z−4.17. In addition, electric dipole oscillator strengths are provided. In the present collision-strength calculations, an improved “top-up” method, which employs relativistic plane waves, was used to obtain the high partial-wave contribution for each transition, in contrast to the partial-relativistic Coulomb–Bethe approximation used in previous work by Zhang and Sampson [H.L. Zhang, D.H. Sampson, At. Data Nucl. Data Tables 63 (1996) 275]. In that earlier work, collision strengths were also provided for the same 185 Δn=0 transitions in C-like ions, but for the more limited list of 46 ions with Z in the range 9≤Z≤54. The collision strengths covered in the present work, particularly those for optically allowed transitions, should be more accurate than the corresponding data given by Zhang and Sampson [H.L. Zhang, D.H. Sampson, At. Data Nucl. Data Tables 63 (1996) 275] and are presented here to replace those earlier results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transition metal carbide catalysts for biomass conversion: A review

The increasing demand for sustainable energy resources has initiated the investigation of biomass conversion over a wide range of catalysts. Among those, transition metal carbides have been extensively studied which demonstrated distinct reactivity and/or selectivity from transition or noble metals in a variety of chemical reactions. In this review, we summarize recent advances in the synthesis of transition metal carbides and their applications in biomass conversion, particularly focusing on the catalytic conversions of (hemi)cellulose, lignin and some typical platform chemicals to fuels or fine chemicals involving C-C, C-O-C and C-O-H bonds cleavages. Perspectives regarding the future research directions on the improvement of transition metal carbide catalysts and detailed reaction mechanism studies are also presented.

Pang, Jifeng↗

Kinetics of the lamellar gel-fluid transition in phosphatidylcholine membranes in the presence of sugars

Phase diagrams are presented for dipalmitoylphosphatidylcholine (DPPC) in the presence of sugars (sucrose) over a wide range of relative humidities (RHs). The phase information presented here, determined by small angle X-ray scattering (SAXS), is shown to be consistent with previous results achieved by differential scanning calorimetry (DSC). Both techniques show a significant effect of sucrose concentration on the phase behaviour of this phospholipid bilayer. An experimental investigation into the effect of sugars on the kinetic behaviour of the gel to fluid transition is also presented showing that increasing the sugar content appears to slightly increase the rate at which the transition occurs.

Lenné, Thomas↗

Scaling of Transition State Vibrational Frequencies and Application of d -Band Theory to the Brønsted–Evans–Polanyi Relationship on Surfaces

Semiempirical energy relations provide a means of estimating thermodynamic properties. Specifically, linear scaling relationships (LSRs) and Brønsted–Evans–Polanyi (BEP) relationships correlate adsorption energies between adsorbates across surfaces and reaction energies with activation barriers, respectively. Although vibrational scaling relations (VSRs) exist between adsorbates at identical sites, scaling between vibrational frequencies of adsorbed local minima and transition states is lacking. Here, we present density functional theory calculations for AH X (A = C, N, O) diffusions on transition metal surfaces and reveal linear scaling between frequencies of local minima and the transition state between those minima. Using d-band theory and linear muffin tin orbital theory (LMTO), we derive the slopes of these transition state vibrational scaling relations (TSVSRs) and, in so doing, provide a rigorous theory extending the original BEP relations developed for solution chemistry to surface chemistry. Furthermore, with a single reference DFT calculation, we predict the slopes and quantify uncertainty in the predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-controlled Intercalation to Conversion Transition in Lithiation of Transition-Metal Chalcogenides – NbSe3

Transition metal chalcogenides (TMCs) can either be used as intercalation cathodes or as conversion type anodes for lithium ion batteries, for which two distinctively different lithiation reaction mechanisms govern the electrochemical performance of TMCs. However, it remains elusive that what controls the transition of lithiation mechanisms. Herein, we investigated the lithiation process of NbSe3 ribbons using in situ transmission electron microscopy (TEM) and observed a size dependent transition from intercalation to conversion reaction. The large NbSe3 ribbons can accommodate high concentration of Li+ through intercalation by relaxing its internal spacing, while lithiation of small NbSe3 ribbons proceeds readily to full conversion reaction. We find that the size dependent variation of lithiation mechanism is attributed to the Li+ diffusion in NbSe3 and the accommodation of newly formed phases, i.e., insufficient Li+ diffusion and limited space for accommodating the volume expansion induced by forming new phases in large size ribbons both impede the intercalation-to-conversion transition. These results demonstrate the inherent structural instability of NbSe3 as an intercalation cathode and fast lithiation rate as a promising conversion type anode.

Environmental Molecular Sciences Laboratory↗

All-optical materials design of chiral edge modes in transition-metal dichalcogenides

Monolayer transition-metal dichalcogenides are novel materials which at low energies constitute a condensed-matter realization of massive relativistic fermions in two dimensions. Here, we show that this picture breaks for optical pumping—instead, the added complexity of a realistic materials description leads to a new mechanism to optically induce topologically protected chiral edge modes, facilitating optically switchable conduction channels that are insensitive to disorder. In contrast to graphene and previously discussed toy models, the underlying mechanism relies on the intrinsic three-band nature of transition-metal dichalcogenide monolayers near the band edges. Photo-induced band inversions scale linearly in applied pump field and exhibit transitions from one to two chiral edge modes on sweeping from red to blue detuning. As a result, we develop an ab initio strategy to understand non-equilibrium Floquet–Bloch bands and topological transitions, and illustrate for WS 2 that control of chiral edge modes can be dictated solely from symmetry principles and is not qualitatively sensitive to microscopic materials details.

36 MATERIALS SCIENCE↗

Spin-orbit-controlled metal–insulator transition in Sr 2 IrO 4

In the context of correlated insulators, where electron–electron interactions (U) drive the localization of charge carriers, the metal–insulator transition is described as either bandwidth- or filling-controlled. Motivated by the challenge of the insulating phase in Sr 2 IrO 4 , a new class of correlated insulators has been proposed, in which spin–orbit coupling (SOC) is believed to renormalize the bandwidth of the half-filled j eff = 1/2 doublet, allowing a modest U to induce a charge-localized phase. Although this framework has been tacitly assumed, a thorough characterization of the ground state has been elusive. Furthermore, direct evidence for the role of SOC in stabilizing the insulating state has not been established, because previous attempts at revealing the role of SOC have been hindered by concurrently occurring changes to the filling. Here, we overcome this challenge by employing multiple substituents that introduce well-defined changes to the signatures of SOC and carrier concentration in the electronic structure, as well as a new methodology that allows us to monitor SOC directly. Specifically, we study Sr 2 Ir 1-x T x O 4 (T = Ru, Rh) by angle-resolved photoemission spectroscopy, combined with ab initio and supercell tight-binding calculations. This allows us to distinguish relativistic and filling effects, thereby establishing conclusively the central role of SOC in stabilizing the insulating state of Sr 2 IrO 4 . Most importantly, we estimate the critical value for SOC in this system to be λ c = 0.42 ± 0.01 eV, and provide the first demonstration of a spin–orbit-controlled metal–insulator transition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase transition induced strain in ZnO under high pressure

Under high pressure, the phase transition mechanism and mechanical property of material are supposed to be largely associated with the transformation induced elastic strain. However, the experimental evidences for such strain are scanty. The elastic and plastic properties of ZnO, a leading material for applications in chemical sensor, catalyst, and optical thin coatings, were determined using in situ high pressure synchrotron axial and radial x-ray diffraction. The abnormal elastic behaviors of selected lattice planes of ZnO during phase transition revealed the existence of internal elastic strain, which arise from the lattice misfit between wurtzite and rocksalt phase. Furthermore, the strength decrease of ZnO during phase transition under non-hydrostatic pressure was observed and could be attributed to such internal elastic strain, unveiling the relationship between pressure induced internal strain and mechanical property of material. Ultimately, these findings are of fundamental importance to understanding the mechanism of phase transition and the properties of materials under pressure.

36 MATERIALS SCIENCE↗

Analysis of turbulent transport and mixing in transitional Rayleigh–Taylor unstable flow using direct numerical simulation data

Data from a 1152X760X1280 direct numerical simulation (DNS) of a transitional Rayleigh-Taylor mixing layer modeled after a small Atwood number water channel experiment is used to comprehensively investigate the structure of mean and turbulent transport and mixing. The simulation had physical parameters and initial conditions approximating those in the experiment. The budgets of the mean vertical momentum, heavy-fluid mass fraction, turbulent kinetic energy, turbulent kinetic energy dissipation rate, heavy-fluid mass fraction variance, and heavy-fluid mass fraction variance dissipation rate equations are constructed using Reynolds averaging applied to the DNS data. The relative importance of mean and turbulent production, turbulent dissipation and destruction, and turbulent transport are investigated as a function of Reynolds number and across the mixing layer to provide insight into the flow dynamics not presently available from experiments. The analysis of the budgets supports the assumption for small Atwood number, Rayleigh/Taylor driven flows that the principal transport mechanisms are buoyancy production, turbulent production, turbulent dissipation, and turbulent diffusion (shear and mean field production are negligible). As the Reynolds number increases, the turbulent production in the turbulent kinetic energy dissipation rate equation becomes the dominant production term, while the buoyancy production plateaus. Distinctions between momentum and scalar transport are also noted, where the turbulent kinetic energy and its dissipation rate both grow in time and are peaked near the center plane of the mixing layer, while the heavy-fluid mass fraction variance and its dissipation rate initially grow and then begin to decrease as mixing progresses and reduces density fluctuations. All terms in the transport equations generally grow or decay, with no qualitative change in their profile, except for the pressure flux contribution to the total turbulent kinetic energy flux, which changes sign early in time (a countergradient effect). The production-to-dissipation ratios corresponding to the turbulent kinetic energy and heavy-fluid mass fraction variance are large and vary strongly at small evolution times, decrease with time, and nearly asymptote as the flow enters a self-similar regime. The late-time turbulent kinetic energy production-to-dissipation ratio is larger than observed in shear-driven turbulent flows. The order of magnitude estimates of the terms in the transport equations are shown to be consistent with the DNS at late-time, and also confirms both the dominant terms and their evolutionary behavior. Thus, these results are useful for identifying the dynamically important terms requiring closure, and assessing the accuracy of the predictions of Reynolds-averaged Navier-Stokes and large-eddy simulation models of turbulent transport and mixing in transitional Rayleigh-Taylor instability-generated flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revisiting dynamics near a liquid-liquid phase transition in Si and Ga: The fragile-to-strong transition

Using molecular dynamics simulations we analyze the dynamics of two atomic liquids that display a liquid-liquid phase transition (LLPT): Si described by the Stillinger-Weber potential and Ga as modeled by the modified embedded-atom model. In particular, our objective is to investigate the extent to which the presence of a dip in the self-intermediate scattering function is a manifestation of an excess of vibrational states at low frequencies and may be associated with a fragile-to-strong transition (FTST) across the LLPT, as suggested recently. Our results suggest a somewhat different picture. First, in the case of Ga we observe the appearance of an excess of vibrational states at low frequencies, even in the absence of the appearance of a dip in the self-intermediate scattering function across the LLPT. Second, studying the behavior of the shear viscosities traversing the LLPTs we find that both substances are fragile in character above and below their respective LLPT temperatures. Instead of a FTST in an absolute sense these findings are more in line with a view in which the LLPTs are accompanied by a transition from a more fragile to a less fragile liquid. Furthermore, we do not find this transition to correlate with the presence of a dip in the intermediate scattering function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled transitions between cupolets of chaotic systems

We present an efficient control scheme that stabilizes the unstable periodic orbits of a chaotic system. The resulting orbits are known as cupolets and collectively provide an important skeleton for the dynamical system. Cupolets exhibit the interesting property that a given sequence of controls will uniquely identify a cupolet, regardless of the system's initial state. This makes it possible to transition between cupolets, and thus unstable periodic orbits, simply by switching control sequences. We demonstrate that although these transitions require minimal controls, they may also involve significant chaotic transients unless carefully controlled. As a result, we present an effective technique that relies on Dijkstra's shortest path algorithm from algebraic graph theory to minimize the transients and also to induce certainty into the control of nonlinear systems, effectively providing an efficient algorithm for the steering and targeting of chaotic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-induced phase transitions in rubidium azide: Studied by in-situ x-ray diffraction

We present the in-situ X-ray diffraction studies of RbN{sub 3} up to 42.0 GPa at room temperature to supplement the high pressure exploration of alkali azides. Two pressure-induced phase transitions of α-RbN{sub 3} → γ-RbN{sub 3} → δ-RbN{sub 3} were revealed at 6.5 and 16.0 GPa, respectively. During the phase transition of α-RbN{sub 3} → γ-RbN{sub 3}, lattice symmetry decreases from a fourfold to a twofold axis accompanied by a rearrangement of azide anions. The γ-RbN{sub 3} was identified to be a monoclinic structure with C2/m space group. Upon further compression, an orthogonal arrangement of azide anions becomes energetically favorable for δ-RbN{sub 3}. The compressibility of α-RbN{sub 3} is anisotropic due to the orientation of azide anions. The bulk modulus of α-RbN{sub 3} is 18.4 GPa, quite close to those of KN{sub 3} and CsN{sub 3}. By comparing the phase transition pressures of alkali azides, their ionic character is found to play a key role in pressure-induced phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure phase transition of alkali metal–transition metal deuteride Li 2 PdD 2

A combined theoretical and experimental study of lithium palladium deuteride (Li 2 PdD 2 ) subjected to pressures up to 50 GPa reveals one structural phase transition near 10 GPa, detected by synchrotron powder x-ray diffraction, and metadynamics simulations. We report the ambient-pressure tetragonal phase of Li 2 PdD 2 transforms into a monoclinic $C2/m$ phase that is distinct from all known structures of alkali metal–transition metal hydrides/deuterides. The structure of the high-pressure phase was characterized using ab initio computational techniques and from refinement of the powder x-ray diffraction data. In the high-pressure phase, the PdD 2 complexes lose molecular integrity and are fused to extended [PdD 2 ] ∞ chains. The discovered phase transition and new structure are relevant to the possible hydrogen storage application of Li 2 PdD 2 and alkali metal–transition metal hydrides in general.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of non-hydrostaticity and grain size on the pressure-induced phase transition of the CoCrFeMnNi high-entropy alloy

Recently, an irreversible polymorphic transition from face-centered cubic to hexagonal close-packing was surprisingly observed under high pressure in the prototype CoCrFeMnNi high-entropy alloys (HEAs) by various research groups. This unexpected phase transition brings new insights into the stability of HEAs, and its irreversibility stimulates exploration for new HEAs via high-pressure compression synthesis. However, the onset pressure for the phase transition was reported to fluctuate over a vast range from ~7 to above 49 GPa in the reported experiments. The reason for this inconsistency remains unclear and puzzles the HEA community. To address this problem, this work systematically investigates the effects of non-hydrostaticity and grain size. Our results demonstrate that larger deviatoric stress induced by the non-hydrostaticity of the pressure medium and larger grain size of the initial sample can both promote a phase transition and, therefore, considerably depress the onset pressure.

36 MATERIALS SCIENCE↗