Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transfer curve”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A magnetohydrodynamic theory of coronal loop transients

The physical and geometrical characteristics of solar coronal loop transients are described in an MHD model based on Archimedes' MHD buoyancy force. The theory was developed from interpretation of coronagraphic data, particularly from Skylab. The brightness of a loop is taken to indicate the electron density, and successive pictures reveal the electron enhancement in different columns. The forces which lift the loop off the sun surface are analyzed as an MHD buoyancy force affecting every mass element by imparting an inertial force necessary for heliocentrifugal motion. Thermal forces are responsible for transferring the ambient stress to the interior of the loop to begin the process. The kinematic and hydrostatic buoyancy overcome the gravitational force, and a flux rope can then curve upward, spiralling like a corkscrew with varying cross section around the unwinding solar magnetic field lines.

Yeh, T.↗
NASA NTRS1991

A viscous-shock-layer analysis of the Martian aerothermal environment

Surface heating and flow field results for the stagnation region of a planetary exploration vehicle entering the Martian atmosphere are presented. Solutions for the high-energy viscous flow fields with complete radiative heating are derived from a viscous-shock-layer analysis for laminar flow under chemical equilibrium conditions. Results are shown with and without coupled radiation ablation injection utilizing the recently developed curve fits for the transport and thermodynamic properties of Martian atmospheric and ablation species. This analysis includes a strongly absorbing boundary layer and, therefore, gives much lower radiative heat transfer rates than those obtained from inviscid analyses.

Gupta, R. N.↗
NASA NTRS1992

UV spectroscopy of Z Chamaeleontis. I - Time dependent dips in superoutburst

Extensive IUE observations of the dwarf nova Z Cha during the 1987 April superoutburst and IUE-Exosat observations during the 1985 July superoutburst are presented. The UV light curve shows two dips when folded on the orbital period. One dip, at orbital phase 0.8 becomes shallower as the superoutburst progresses and can be associated with decreasing mass transfer rate from the secondary star. The other dip, at orbital phase 0.15, appears after the development of the superhump and some days after the occurrence of the largest dip at phase 0.8. The continuum flux distribution during superoutbursts is fainter and redder than in low-inclination dwarf novae during superoutbursts. This is interpreted in terms of the extended vertical disk structure which occults the hot inner parts of the disk with the development of a 'cool' bulge on the edge of the disk at orbital phase 0.75. Details of the behaviour of the UV emission lines during eclipse and away from eclipse are discussed.

Harlaftis, E. T.↗
NASA NTRS1952

Dynamic response at altitude of a turbojet engine with variable area exhaust nozzle

The dynamic characteristics of turbojet engine with variable exhaust nozzle area were investigated over a range of altitudes and flight Mach numbers. These characteristics generalize to standard static level condition. Data resulting from approximate step disturbances in either manipulated variable suggested functional relationships from which functions can be derived. The constants of the transfer functions are listed for five combinations of engine speed and exhaust nozzle area. The minimum data needed to completely define the transfer functions were: experimentally determined dynamic characteristics, such as engine time constant and initial rise ratio, resulting from either manipulated variable; static characteristics determined from steady-state performance curves.

Delio, Gene J↗
NASA NTRS2006

Spatial Resolution Characterization for QuickBird Image Products 2003-2004 Season

This presentation focuses on spatial resolution characterization for QuickBird panochromatic images in 2003-2004 and presents data measurements and analysis of SSC edge target deployment and edge response extraction and modeling. The results of the characterization are shown as values of the Modulation Transfer Function (MTF) at the Nyquist spatial frequency and as the Relative Edge Response (RER) components. The results show that RER is much less sensitive to accuracy of the curve fitting than the value of MTF at Nyquist frequency. Therefore, the RER/edge response slope is a more robust estimator of the digital image spatial resolution than the MTF. For the QuickBird panochromatic images, the RER is consistently equal to 0.5 for images processed with the Cubic Convolution resampling and to 0.8 for the MTF resampling.

Blonski, Slawomir↗
NASA NTRS2024

Time-dependent Photoionization Modeling of Warm Absorbers: High-resolution Spectra and Response to Flaring Light Curves

Time-dependent photoionization modeling of warm absorber (WA) outflows in active galactic nuclei can play an important role in understanding the interaction between WAs and the central black hole. The WA may be out of the equilibrium state because of the variable nature of the central continuum. In this paper, with the help of time dependent photoionization modeling, we study how the WA gas properties change with time and how it reacts to changing radiation fields. Incorporating a flaring incident light curve, we investigate the behavior of WAs using a photoionization code that simultaneously and consistently solves the time-dependent equations of level population, heating and cooling, and radiative transfer. We simulate the physical processes in the gas clouds, such as ionization, recombination, heating, cooling, and the transfer of ionizing radiation through the cloud and present high-resolution time-resolved absorption spectra. We demonstrate that time-dependent radiative transfer is important and the calculations that omit this effect quantitatively and systematically underestimate the absorption. Time-dependent photoionization models provide crucial insights into the characteristics of WAs and can be used to constrain their density and spatial distribution.

Astrophysicists↗
NASA NTRS2024

Time-Dependent Photoionization Modeling of Warm Absorbers: High-Resolution Spectra and Response to Flaring Light Curves

Time-dependent photoionization modeling of warm absorber (WA) outflows in active galactic nuclei can play an important role in understanding the interaction between WAs and the central black hole. The WA may be out of the equilibrium state because of the variable nature of the central continuum. In this paper, with the help of time dependent photoionization modeling, we study how the WA gas properties change with time and how it reacts to changing radiation fields. Incorporating a flaring incident light curve, we investigate the behavior of WAs using a photoionization code that simultaneously and consistently solves the time-dependent equations of level population, heating and cooling, and radiative transfer. We simulate the physical processes in the gas clouds, such as ionization, recombination, heating, cooling, and the transfer of ionizing radiation through the cloud and present high-resolution time-resolved absorption spectra. We demonstrate that time-dependent radiative transfer is important and the calculations that omit this effect quantitatively and systematically underestimate the absorption. Time-dependent photoionization models provide crucial insights into the characteristics of WAs and can be used to constrain their density and spatial distribution.

Dev R. Sadaula↗
NASA NTRS1993

Vaporization heat transfer of dielectric liquids on enhanced surfaces covered with screen wicks

Experiments were conducted to investigate the vaporization heat transfer characteristics for the dielectric liquid FC-72 on several wicking surfaces which may be used in flat-plate heat pipes. The wicking materials studied included microstructure enhanced surfaces and coarse surfaces covered with screen meshes. Experimental data for q versus deltaT curves and critical heat fluxes were obtained for the two different operating conditions of a heat pipe, evaporation, and shallow pool boiling. When the liquid level was above the heated surface, the height of the liquid level above the surface was varied from 0 to 10 mm. When the liquid level was below the heated surface, the distance from the liquid level to the edge of the surface was adjusted from 0 to 15 mm. Experimental results revealed that for shallow pool boiling when the heated surface was covered with a wire screen mesh, the heat transfer coefficient increased at lower heat fluxes but the critical heat flux (CHF) decreased for all the surfaces tested. In the case of evaporation, both CHF and the heat transfer coefficient increased as the microstructure surfaces were covered with screen meshes.

Gu, C. B.↗
NASA NTRS1999

Simulation of the Universal-Time Diurnal Variation of the Global Electric Circuit Charging Rate

A global lightning model that includes diurnal and annual lightning variation, and total flash density versus latitude for each major land and ocean, has been used as the basis for simulating the global electric circuit charging rate. A particular objective has been to reconcile the difference in amplitude ratios [AR=(max-min)/mean] between global lightning diurnal variation (AR approx. = 0.8) and the diurnal variation of typical atmospheric potential gradient curves (AR approx. = 0.35). A constraint on the simulation is that the annual mean charging current should be about 1000 A. The global lightning model shows that negative ground flashes can contribute, at most, about 10-15% of the required current. For the purpose of the charging rate simulation, it was assumed that each ground flash contributes 5 C to the charging process. It was necessary to assume that all electrified clouds contribute to charging by means other than lightning, that the total flash rate can serve as an indirect indicator of the rate of charge transfer, and that oceanic electrified clouds contribute to charging even though they are relatively inefficient in producing lightning. It was also found necessary to add a diurnally invariant charging current component. By trial and error it was found that charging rate diurnal variation curves in Universal time (UT) could be produced with amplitude ratios and general shapes similar to those of the potential gradient diurnal variation curves measured over ocean and arctic regions during voyages of the Carnegie Institute research vessels.

Mackerras, D.↗
NASA NTRS1999

Simulation of the Universal-Time Diurnal Variation of the Global Electric Circuit Charging Rate

A global lightning model that includes diurnal and annual lightning variation, and total flash density versus latitude for each major land and ocean, has been used as the basis for simulating the global electric circuit charging rate. A particular objective has been to reconcile the difference in amplitude ratios [AR=(max-min)/mean] between global lightning diurnal variation (AR approximately equals 0.8) and the diurnal variation of typical atmospheric potential gradient curves (AR approximately equals 0.35). A constraint on the simulation is that the annual mean charging current should be about 1000 A. The global lightning model shows that negative ground flashes can contribute, at most, about 10-15% of the required current. For the purpose of the charging rate simulation, it was assumed that each ground flash contributes 5 C to the charging process. It was necessary to assume that all electrified clouds contribute to charging by means other than lightning, that the total flash rate can serve as an indirect indicator of the rate of charge transfer, and that oceanic electrified clouds contribute to charging even though they are relatively inefficient in producing lightning. It was also found necessary to add a diurnally invariant charging current component. By trial and error it was found that charging rate diurnal variation curves could be produced with amplitude ratios and general shapes similar to those of the potential gradient diurnal variation curves measured over ocean and arctic regions during voyages of the Carnegie Institute research vessels. The comparisons were made for the northern winter (Nov.-Feb.), the equinox (Mar., Apr., Sept., Oct.), the northern summer (May-Aug.), and the whole year.

Mackerras, David↗
DOE OSTI2026

Integrated Process Model Utilization and Development for Inertial Fusion Energy

This CRADA between LLNS and Longview Fusion Energy Systems utilized a modernized LLNL Integrated Process Model (IPM) to assess technoeconomic viability and power plant configurations for Inertial Fusion Energy (IFE). During the collaboration period, a streamlined IPM model was produced by LLNL, which consolidated a combination of 3 models under one file. Additionally, obsolete parameters were removed and parameters available for trade space analysis were organized in a user-friendly fashion on the front interface. Gain scaling curves were discussed and analyzed in the framework of the IPM. Additional updates were made to account for cost scaling to today's dollars using an average inflation rate. Heat transfer material costing was updated using a ground up approach with public vendor data. Further levelized cost of electricity (LCOE) methods and models were discussed and reviewed for applicability to the IPM. Prior published literature on optical scaling was also discussed. Moreover, as part of this CRADA, the Participant developed a fusion technology development roadmap and point designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Integrated Process Model Utilization and Development for Inertial Fusion Energy

This CRADA between LLNS and Longview Fusion Energy Systems utilized a modernized LLNL Integrated Process Model (IPM) to assess technoeconomic viability and power plant configurations for Inertial Fusion Energy (IFE). During the collaboration period, a streamlined IPM model was produced by LLNL, which consolidated a combination of 3 models under one file. Additionally, obsolete parameters were removed and parameters available for trade space analysis were organized in a user-friendly fashion on the front interface. Gain scaling curves were discussed and analyzed in the framework of the IPM. Additional updates were made to account for cost scaling to today's dollars using an average inflation rate. Heat transfer material costing was updated using a ground up approach with public vendor data. Further levelized cost of electricity (LCOE) methods and models were discussed and reviewed for applicability to the IPM. Prior published literature on optical scaling was also discussed. Moreover, as part of this CRADA, the Participant developed a fusion technology development roadmap and point designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2004

The response of thermally and optically stimulated luminescence from Al2O3:C to high-energy heavy charged particles

The thermoluminescence (TL) and optically stimulated luminescence (OSL) response of Al2O3 dosimeters to high-energy heavy charged particles (HCP) has been studied using the heavy ion medical accelerator at Chiba, Japan. The samples were Al2O3 single-crystal chips, of the type usually known as TLD-500, and Luxel(TM) dosimeters (Al2O3:C powder in plastic) from Landauer Inc. The samples were exposed to 4He (150 MeV/u), 12C (400 MeV/u), 28Si (490 MeV/us) and 56Fe (500 MeV/u) ions, with linear energy transfer values covering the range from 2.26 to 189 keV/micrometers in water and doses from 1 to 100 mGy (to water). A 90Sr/90Y beta source, calibrated against a 60Co secondary standard, was used for calibration purposes. For OSL, we used both continuous-wave OSL measurements (CW-OSL, using green light stimulation at 525 nm) and pulsed OSL measurements (POSL, using 532 nm stimulation from a Nd:YAG Q-switched laser). The efficiencies (eta HCP, gamma) of the different HCPs at producing OSL or TL were observed to depend not only upon the linear energy transfer (LET) of the HCP, but also upon the sample type (single crystal chip or Luxel(TM)) and the luminescence method used to define the signal--i.e. TL, CW-OSL initial intensity, CW-OSL total area, or POSL. Observed changes in shape of the decay curve lead to potential methods for extracting LET information of unknown radiation fields. A discussion of the results is given, including the potential use of OSL from Al2O3 in the areas of space radiation dosimetry and radiation oncology. c2004 Elsevier Ltd. All rights reserved.

Heavy Ions↗
NASA NTRS1972

Boiling from small cylinders.

Heat transfer is observed as a function of temperature on small horizontal wires in water and four organic liquids. When the wire radius is sufficiently small, the hydrodynamic transitions in the boiling curve disappear and the curve becomes monotonic. Three modes of heat removal are identified for the monotonic curve and described analytically: a natural convection mode, a mixed film boiling and natural convection mode, and a pure film boiling mode. Nucleate boiling does not occur on the small wires. The study was motivated by an interest in predicting the behavior of large heaters at low gravity. The application of the present results to such circumstances is therefore discussed. It is proposed that the peak and minimum heat fluxes will vanish at low gravity as well as on small wires.

Bakhru, N.↗
NASA NTRS1989

Acoustic radiation from a shell with internal structures

A method is developed to compute frequency response and acoustic radiation of a complex shell. The axisymmetric geometry of the shell includes cylindrical, conical, and spherical segments stiffened by discrete rings and bulkheads. The shell is coupled to internal masses and elastic frames. Shell segments are treated by transfer matrices. Rings, bulkheads, frames, and concentrated masses are treated by impedances at junctions of segments. The shell is coupled to an external acoustic fluid treated by Green's function and curved surface elements. A major issue facing the method's treatment of the fluid would be lack of existence or uniqueness encountered in the uncoupled, external acoustic problem at characteristic wavenumbers. By using a simple spherical shell, without internal structures, this potential hindrance is shown not to arise. A fuller application of the method awaits subsequent results.

El-Raheb, M.↗
NASA NTRS1991

H-beta photometry of V1010 Ophiuchi

An analysis is presented of previously unpublished intermediate and narrow band H-beta light curves of the short period eclipsing binary V1010 Oph. The temperature of the primary is determined directly by comparing the UV continuum with Kurucz model atmospheres and solve the broadband lightcurve using the Wilson-Devinney program. The present solution has the primary filling its Roche lobe while the secondary is detached from its lobe. An asymmetry in the light curve in which first quadrature (0.25 P) is brighter than the second quadrature (0.75 P) may be the result of local heating of the inner surface of the secondary by mass transfer from the primary. The present semidetached solution indicates that the system is probably evolved.

Corcoran, M. F.↗
NASA NTRS1995

Spectroscopic monitoring of active Galactic nuclei from CTIO. 1: NGC 3227

The results of a five-month monitoring campaign on the Seyfert 1.5 galaxy NGC 3227 are presented. Variability was detected in the continuum and in the broad emission lines. Cross correlations of the 4200 A continuum light curve with the H beta and He II wavelength 4686 emission-line light curves indicate delays of 18 +/- 5 and 16 +/- 2 days, respectively, between the continuum variations and the response of the lines. We apply a maximum entropy method to solve for the transfer function that relates the H beta and He II wavelength 4686 lines and 4200 A continuum variability and the result of this analysis suggests that there is a deficit of emission-line response due to gas along the line of sight to the continuum source for both lines. Using a composite off-nuclear spectrum, we synthesize the bulge stellar population, which is found to be mainly old (77% with age greater than 10 Gyr) with a metallicity twice the solar value. The synthesis also yields an internal color excess E(B - V) approximately equal 0.04. The mean contribution of the stellar population to the inner 5 sec x 10 sec spectra during the campaign was approximately equal 40%.

Winge, Claudia↗