Detecting Trace Boron Doped in Tungsten Plates Using ToF-SIMS, Raman, and SEM
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
ABSTRACT We present the analysis of deep X-ray observations of 10 massive galaxy clusters at redshifts 1.05 < z < 1.71, with the primary goal of measuring the metallicity of the intracluster medium (ICM) at intermediate radii, to better constrain models of the metal enrichment of the intergalactic medium. The targets were selected from X-ray and Sunyaev–Zel’dovich effect surveys, and observed with both the XMM–Newton and Chandra satellites. For each cluster, a precise gas mass profile was extracted, from which the value of r500 could be estimated. This allows us to define consistent radial ranges over which the metallicity measurements can be compared. In general, the data are of sufficient quality to extract meaningful metallicity measurements in two radial bins, r < 0.3r500 and 0.3 < r/r500 < 1.0. For the outer bin, the combined measurement for all 10 clusters, Z/Z⊙ = 0.21 ± 0.09, represents a substantial improvement in precision over previous results. This measurement is consistent with, but slightly lower than, the average metallicity of 0.315 solar measured at intermediate-to-large radii in low-redshift clusters. Combining our new high-redshift data with the previous low-redshift results allows us to place the tightest constraints to date on models of the evolution of cluster metallicity at intermediate radii. Adopting a power-law model of the form Z ∝ (1 + z)γ, we measure a slope $\gamma = -0.5^{+0.4}_{-0.3}$, consistent with the majority of the enrichment of the ICM having occurred at very early times and before massive clusters formed, but leaving open the possibility that some additional enrichment in these regions may have occurred since a redshift of 2.
ABSTRACT The green valley represents the population of galaxies that are transitioning from the actively star-forming blue cloud to the passively evolving red sequence. Studying the properties of the green valley galaxies is crucial for our understanding of the exact mechanisms and processes that drive this transition. The green valley does not have a universally accepted definition. The boundaries of the green valley are often determined by empirical lines that are subjective and vary across studies. We present an unambiguous definition of the green valley in the colour–stellar mass plane using the entropic thresholding. We first divide the galaxy population into the blue cloud and the red sequence based on a colour threshold that minimizes the intraclass variance and maximizes the interclass variance. Our method splits the region between the mean colours of the blue cloud and the red sequence into three parts by maximizing the total entropy of that region. We repeat our analysis in a number of independent stellar mass bins to define the boundaries of the green valley in the colour–mass diagram. Our method provides a robust and natural definition of the green valley.
ABSTRACT We investigate possible factors that drive fast quasar outflows using a sample of 39 249 quasars at median redshift 〈z〉 ≈ 2.17. Unique to this study, the quasar redshifts are re-measured based on the Mg ii emission line, and explore unprecedented outflow velocities (>6000 km s−1), while maintaining statistical significance. We measure reliable C iv blueshifts for 1178 quasars with velocities >2500 km s−1. From those, 255(13) quasars have blueshifts above 4000(6000) km s−1, with the highest C iv velocity ≈7000 km s−1. Several correlations are observed, where higher C iv blueshifts in general are in quasars with broader, weaker C iv emission profiles, weak He ii emission, larger Eddington ratios, and bluer ultraviolet (UV) continuum slope across the rest-frame UV to near-infrared. Analysis reveals two primary factors contributing to faster outflows: higher Eddington ratios, and softer far-UV continuum (hν >24.6 eV). We find supporting evidence that radiative line driving may generate extreme outflow velocities, influenced by multiple factors as suggested by the aforementioned correlations. This evidence highlights the importance of considering a multidimensional parameter space in future studies when analyzing large C iv blueshifts to determine the fundamental causes of outflows.
The environmental dependence of Type Ia supernova (SN Ia) luminosities is well established, and efforts are being made to find its origin. Previous studies typically use the currently observed status of the host galaxy. However, given the delay time between the birth of the progenitor star and the SN Ia explosion, the currently observed status may differ from the birth environment of the SN Ia progenitor star. In this paper, employing the chemical evolution and accurately determined stellar population properties of 44 early-type host galaxies, we, for the first time, estimate the SN Ia progenitor star birth environment, specifically [Fe/H] Birth and [α/Fe] Birth . We show that [α/Fe] Birth has a $30.4^{\text{+10.6}}_{-10.1}{{\ \rm per\ cent}}$ wider range than the currently observed [α/Fe] Current , while the range of [Fe/H] Birth is not statistically different ($17.9^{\text{+26.0}}_{-27.1}{{\ \rm per\ cent}}$) to that of [Fe/H] Current . The birth and current environments of [Fe/H] and [α/Fe] are sampled from different populations (p-values of the Kolmogorov–Smirnov test <0.01). We find that light-curve fit parameters are insensitive to [Fe/H] Birth (<0.9σ for the non-zero slope), while a linear trend is observed with Hubble residuals (HRs) at the 2.4σ significance level. With [α/Fe] Birth , no linear trends (<1.1σ) are observed. Interestingly, we find that [α/Fe] Birth clearly splits the SN Ia sample into two groups: SN Ia exploded in [α/Fe] Birth -rich or [α/Fe ]Birth -poor environments. SNe Ia exploded in different [α/Fe] Birth groups have different weighted-means of light-curve shape parameters: 0.81 ± 0.33 (2.5σ). They are thought to be drawn from different populations (p-value = 0.01). Regarding SN Ia colour and HRs, there is no difference (<1.0σ) in the weighted-means and distribution (p-value > 0.27) of each [α/Fe] Birth group.
Abstract Iron is accumulated symplastically in kelp in a non-ferritin core that seems to be a general feature of brown algae. Microprobe studies show that Fe binding depends on tissue type. The sea is generally an iron-poor environment and brown algae were recognized in recent years for having a unique, ferritin-free iron storage system. Kelp (Laminaria digitata) and the filamentous brown alga Ectocarpus siliculosus were investigated using X-ray microprobe imaging and nanoprobe X-ray fluorescence tomography to explore the localization of iron, arsenic, strontium, and zinc, and micro-X-ray absorption near-edge structure (μXANES) to study Fe binding. Fe distribution in frozen hydrated environmental samples of both algae shows higher accumulation in the cortex with symplastic subcellular localization. This should be seen in the context of recent ultrastructural insight by cryofixation–freeze substitution that found a new type of cisternae that may have a storage function but differs from the apoplastic Fe accumulation found by conventional chemical fixation. Zn distribution co-localizes with Fe in E. siliculosus, whereas it is chiefly located in the L. digitata medulla, which is similar to As and Sr. Both As and Sr are mostly found at the cell wall of both algae. XANES spectra indicate that Fe in L. digitata is stored in a mineral non-ferritin core, due to the lack of ferritin-encoding genes. We show that the L. digitata cortex contains mostly a ferritin-like mineral, while the meristoderm may include an additional component.
Explore the source record for details and available documents.
Here we apply the density-matrix renormalization group (DMRG) method to a one-dimensional Hubbard model that lacks Umklapp scattering and thus provides an ideal case to study the Mott-Hubbard transition analytically and numerically. The model has a linear dispersion and displays a metal-to-insulator transition when the Hubbard interaction U equals the bandwidth U c = W, where the single-particle gap opens linearly, Δ(U ≥ W) = U - W. The simple nature of the elementary excitations permits us to determine numerically with high accuracy the critical interaction strength and the gap function in the thermodynamic limit. The jump discontinuity of the momentum distribution $n_k$ at the Fermi wave number $k_F$ = 0 cannot be used to locate accurately U c from finite-size systems. However, the slope of $n_k$ at the band edges $k_B$ = ±π, reveals the formation of a single-particle bound state which can be used to determine U c reliably from $n_k$ using accurate finite-size data.
Not provided.
Heavy quarks produced in relativistic heavy-ion collisions are known to be sensitive probes of the hot and dense QCD matter they traverse. In this paper we study how their dynamics is affected by the nature of the bulk evolution of the QCD matter, the initial condition of the system, and the treatment of elementary interactions between heavy quarks and the surrounding medium. For the same initial condition and the same quark-gluon plasma (QGP) expansion scenario we discuss the consequences of the assumption of a local equilibrium by comparing the consequences for the nuclear modification factor $R_{AA}$ and the elliptic flows of charm quarks, scrutinizing the different components of the final distribution of charm quarks. For this purpose we employ the parton-hadron-string dynamics (PHSD) model, which is an off-shell microscopic transport approach, as well as the linearized-Boltzmann (LB) scheme obtained by coarse graining the PHSD bulk and assuming local equilibrium for the interactions of the charm quarks with the bulk. The $R_{AA}$ of charm quarks stemming from the later LB approach is also compared to a genuine fluid dynamics evolution initiated by the coarse grained PHSD, which allows us to further assess the consequences of reducing the full $\textit{n}$-body dynamics. We then proceed to a systematic comparison of PHSD (in its LB approximation) with MC@HQ, another transport model for heavy flavors which also relies on the LB approach. In particular, we investigate the consequences for the nuclear modification factor of charm quarks if we vary separately the initial heavy quark distribution function in matter, the expansion dynamics of the QGP, and the elementary interactions of heavy quarks of these models. We find that the results for both models vary significantly depending on the details of the calculation. However, both models achieve very similar predictions for key heavy quark observables for certain combinations of initial condition, bulk evolution, and interactions. In this work, we conclude that this ambiguity limits our ability to determine the different properties of the system based on the current set of observables.
Not Available
Not Available
In this work, we leverage cosmic microwave background (CMB) data from the Atacama Cosmology Telescope (ACT) and LSS data from the imaging survey conducted by the Dark Energy Spectroscopic Instrument (DESI) to study the distribution of gas around galaxy groups at low redshift, z ≈ 0.3, via the kinematic Sunyaev-Zel'dovich (kSZ) effect. In particular, we perform velocity-weighted stacking on the photometric galaxies from the Bright Galaxy Survey (BGS) to isolate the monopole and quadrupole of the kSZ signal, orienting the stacked images along 2D filaments identified using the Hessian of the projected gravitational potential. We find a 7.2σ detection in the monopole of the signal (i.e., the gas density profile) and a 4σ detection in the quadrupole (m = 2), constituting the first measurement of the alignment between gas distribution and the cosmic web through the kSZ effect. As it is a linear probe of the local gas density, the kSZ has heightened sensitivity to the warm-hot intergalactic medium (WHIM), which is believed to house the majority of the "missing baryons."Mapping out the gas density at low redshifts, as enabled by our measurements, is crucial for weak lensing surveys, for which the impact of baryons on small scales is a major impediment. We compare the anisotropic signal against two hydrodynamical simulations, TNG300-1 and Illustris, which have very different baryonic feedback prescriptions. We find that the anisotropic signal measured in the data is comparable but slightly larger and more extended compared with the simulations. Further, this suggests that there is excess accretion and feedback taking place through the filaments, hinting at the possible presence of spin-filament alignment of the BGS objects.
Sapphire has mechanical and electrical properties that are advantageous for the construction of internal components of radiation detectors such as time projection chambers and bolometers. However, it has proved difficult to assess its 232 Th and 238 U content down to the picogram per gram level. Here, this work reports an experimental verification of a computational study that demonstrates 𝛾𝛾 coincidence counting, coupled with neutron activation analysis (NAA), can reach ppt sensitivities. Combining results from 𝛾𝛾 coincidence counting with those of earlier single-𝛾 counting based NAA shows that a sample of Saint Gobain sapphire has 232 Th and 238 U concentrations of <0.26 ppt and <2.3 ppt, respectively; the best constraints on the radiopurity of sapphire.
Explore the source record for details and available documents.
Through the USAID-NREL partnership, the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has evaluated the potential for transit bus electrification in Mexico City and two locations in León, Mexico to inform future vehicle and infrastructure purchases. NREL collected IHz GPS data between September to October of 2017 from the existing transit buses as inputs to the Future Automotive Systems Technology Simulator (FASTSim) tool. NREL used the data and FASTSim models to provide detailed operational performance requirements of electric buses operated within the context of the three locations and highlighted bus operations that are candidates for electrification.
Not provided.