Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Is there a limit on solar flare proton fluxes

The possibility that solar flare proton fluxes are limited in magnitude by saturation effects inherent to the acceleration mechanism is explored. If cyclotron damping of Alfven waves acts to accelerate protons, the criterion that the damping time is comparable to the acceleration time provides a fast particle number density at which protons load the wave spectrum. The limiting flux at 1 AU is obtained by a volume integration over the acceleration region and redistribution into an interplanetary emission cone. A simplified explosion model permits a delineation between volume and surface acceleration mechanisms in terms of a temporal parameter, the effective duration of acceleration. It is concluded that the limiting flux may be a realistic concept, but that further investigation is warranted to sharpen the criterion.

Barbosa, D. D.↗
DOE OSTI2024

Physical vapor deposition of organic glasses (Final Report)

As of 2009, when this project began, it had been established that physical vapor deposition (PVD) could produce high density and high stability (“ultrastable”) glasses of two organic molecules. With this project, we established that ultrastability was a quite general result for PVD glasses of organic molecules and, in particular, for the organic semiconductors used to produce organic light emitting diodes (OLEDs). We established that ultrastable glasses have enhanced photochemical and chemical stability, and increased resistance to crystallization. We developed a temperature-gradient deposition stage to more efficiently screen the properties of PVD glasses. We established that PVD glasses are usually anisotropic and that this anisotropy can be controlled. We characterized the unusual transformation mechanism of PVD glasses, which superficially is more similar to crystals than liquid-cooled glasses. In the most recent grant cycle, we extended these results to co-deposition of two organic semiconductors, showing that mixed PVD glasses of these systems usually showed ultrastability and high density; in two cases, co-deposition results in component segregation, and deposition conditions can be adjusted to control domain size. In our work since 2009, we established that the surface equilibration mechanism can successfully explain almost all of the properties of PVD glasses, and that this mechanism can provide useful predictions regarding stability and anisotropy.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Surface energy fluxes at Central Florida during the convection and precipitation electrification experiment

One of the objectives of CaPE is to better understand the convective process in central and south Florida during the warm season. The energy and moisture exchanges between the surface and the atmosphere are closely related to this process. Some recent studies have shown that the surface energy balance plays an important role in the climatic fields (Shukla and Mintz, 1982; Sud and Smith, 1985; Sato et. al, 1989). Surface energy fluxes and related surface processes such as evapotranspiration and sensible heat transfer directly effect the temperature, humidity, cloud formation and precipitation. For example, mesoscale circulation around a discontinuity in vegetation type were shown to be stronger with wet soil than with dry soil using an evapotranspiration model (Pinty et. al, 1989). In order to better describe the processes in the atmosphere at various scales and improve our ability of modeling and predicting weather related events, it is crucial to understand the mechanism of surface energy transfer in relation to atmospheric events. Surface energy flux measurements are required to fully understand the interactions between the atmosphere and the surface.

Nie, D.↗
DOE OSTI2023

Accelerated Materials Design for Molten Salt Technologies Using Innovative High-Throughput Methods

The focus of the project is on building an innovative accelerated materials design platform for molten salt technologies using novel high-throughput methods coupled to data analytics. The main objectives is to predict a FeCrMnNi alloy compositional space with better corrosion resistance than stainless steel 316 and identify new molten salt corrosion mechanisms. The project demonstrates the feasibility to use high-throughput methods coupled to data analytics to accelerate alloy design for extreme environments applications. Using a trained and tested machine learning (ML) model, 2000 FeCrMnNi alloy corrosion rate in molten chloride salts were predicted and a compositional field with corrosion rate lower than 316 stainless steel was identified. The ML model interpretability unveiled multiple features of importance in the model prediction. Some features were expected to be of relative significance, such as work function, surface energy and alloy electronegativity, and the ML model interpretability analysis confirmed those. On the other hand, the most important feature is the diffusion coefficient of Ni in the bulk alloy which indicates that a surface diffusion mechanism plays an important role in the overall corrosion mechanism in molten salts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hydroxylation and Cation Segregation in (La 0.5 Sr 0.5 )FeO 3-$δ$ Electrodes

Simultaneously achieving high activity and stability is the primary challenge when engineering (electro)catalysts. Transition metal perovskite oxides are employed as air electrodes for solid-oxide fuel cells and electrolyzers. However, degradation of oxygen exchange kinetics at the solid–gas interface, often linked to alkaline-earth cation segregation and precipitation, limits widespread commercialization. Here, we systematically investigated the surface degradation mechanism induced by gas-phase impurities in La 0.5 Sr 0.5 )FeO 3-$δ$ (LSF55) thin-film electrodes by varying the concentration of H 2 O, SO 2 , and CO 2 . Degradation of the area-specific resistance in ambient and humidified synthetic air is significantly greater than in dry ambient and dry synthetic air, pointing to the importance of water vapor. Time-resolved, in situ ambient pressure X-ray photoelectron spectroscopy performed in O 2 showed that nonbulk Sr is present on the surface before the exposure to water vapor. Upon introduction of water vapor, neither additional Sr segregation nor precipitation driven by water vapor is a necessary condition for degradation. Rather, hydroxylation of the surface induces irreversible and significant degradation. At the same time, we show that Sr migration driven by water vapor is partially reversible. These fundamental insights can be used for the rational design of electrodes with improved catalytic stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1981

Combustion of solid carbon rods in zero and normal gravity

In order to investigate the mechanism of carbon combustion and to assess the importance of gravitational induced convection on the process, zero and normal gravity experiments were conducted in which spectroscopic carbon rods were resistance ignitied and burned in dry oxygen environments. In the zero-gravity drop tower tests, a blue flame surrounded the rod, showing that a gas phase reaction in which carbon monoxide was oxidized to carbon dioxide was taking place. The ratio of flame diameter to rod diameter was obtained as a function of time. It was found that this ratio was inversely proportional to both the oxygen pressure and the rod diameter. In the normal gravity tests, direct mass spectrometric sampling was used to measure gas phase concentrations. The gas sampling probe was positioned near the circumference of a horizontally mounted 0.615 cm diameter carbon rod, either at the top or at angles of 45 deg to 90 deg from the top, and yielded concentration profiles of CO2, CO, and O2 as a function of distance from the surface. The mechanism controlling the combustion process was found to change from chemical process control at the 90 deg and 45 deg probe positions to mass transfer control at the 0 deg probe position at the top of the rod. Under the experimental conditions used, carbon combustion was characterized by two surface reactions, 2C + O2 yields 2CO and CO2 + C yields 2CO, and a gas phase reaction, 2CO + O2 yields 2CO2.

Spuckler, C. M.↗
DOE OSTI2025

Carbonation of MgO Single Crystals: Implications for Direct Air Capture of CO 2

Direct air capture (DAC) may be feasible to remove carbon dioxide (CO 2 ) from the atmosphere at the gigaton scale, holding promise to become a major contributor to climate change mitigation. Mineral looping using magnesium oxide (MgO) is potentially an economical, efficient, and sustainable pathway to gigaton-scale DAC. The hydroxylation and carbonation of MgO determine the efficiency of the looping process, but their rates and mechanisms remain uncertain. Here, in this work, MgO single crystals were reacted in air or CO 2 at varying humidities and characterized by X-ray scattering, microscopy, and vibrational spectroscopy. Results show that the hydroxylation formed a brucite (Mg(OH) 2 )-like layer immediately after crystal cleaving. Concurrently, the carbonation formed hydrated magnesium carbonate phases, including barringtonite (MgCO 3 ·2H 2 O) and nesquehonite (MgCO 3 ·2H 2 O), in the layer. Rapid initial growth of the layer is also manifested in short-range bending/warping of nanocrystallites, resulting in multiple orientations of the same phases on the surface. The layer growth slowed down over time, indicating surface passivation. The formation of barringtonite and nesquehonite with 1:1 CO 3 /Mg ratio indicates an efficient carbonation when compared to other magnesium carbonate phases of lower ratio. Our results are essential for understanding surface passivation mechanisms and tackling the passivation issue of mineral looping DAC technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The Polarity of Co-solvents Regulates the Charge Storage Mechanisms in Supercapacitors with Concentrated Electrolytes

Developing better energy storage devices depends on comprehending the underlying mechanisms involved in charge storage. With the continuous conception of new electrolytes, this task becomes progressively more urgent and complex. An example is the utilization of co-solvated concentrated solutions. While these show promising electrochemical responses, their dynamic properties (especially under confinement) and their relationships with performance are not fully understood. Here, we combined modified step potential electrochemical spectroscopy and quasielastic neutron scattering to investigate systems composed of activated mesoporous carbon (AMC) and concentrated solutions of lithium bis(trifluoromethanesulfonyl)imide in acetonitrile co-solvated with either toluene or acetone. Further, we report that acetone does not impair surface-controlled mechanisms, contrary to the case with toluene, which competes with charged species to populate the AMC’s pores without contributing to charge storage. In turn, toluene promotes a greater overall capacitance owing to Faradaic processes, which may be related to changes in the solvation structures under confinement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dial It Down: The Effect of Strongly Interacting Adsorbates on the BiAg 2 Rashba Surface State

Organic semiconductors interfaced with spin–orbit coupled materials offer a rich playground for fundamental studies of controlling spin dynamics in spintronic devices. The adsorbate–surface interactions at such interfaces play a key role in determining the valence electronic and spin structure and consequently, the device physics as well. Here we show that strong adsorbate–surface alloy interaction leads to weakening of the electronic coupling between the surface alloy atoms and quenches the spin–orbit coupled surface state, demonstrated for the case of the strong organic electron acceptor 2,7-dinitropyrene-4,5,9,10-tetrone (NO 2 –PyT, C 16 H 4 N 2 O 8 ) on the Rashba spin–orbit coupled surface alloy BiAg 2 /Ag(111). Furthermore, our findings demonstrate an important challenge associated with using molecular adsorbates to tailor the spin texture in BiAg 2 /Ag(111), and our work provides guidelines to consider while designing interfacial systems to engineer the spin texture in Rashba surface alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Machine-learning accelerated geometry optimization in molecular simulation

Geometry optimization is an important part of both computational materials and surface science because it is the path to finding ground state atomic structures and reaction pathways. These properties are used in the estimation of thermodynamic and kinetic properties of molecular and crystal structures. This process is slow at the quantum level of theory because it involves an iterative calculation of forces using quantum chemical codes such as density functional theory (DFT), which are computationally expensive and which limit the speed of the optimization algorithms. It would be highly advantageous to accelerate this process because then one could do either the same amount of work in less time or more work in the same time. Here, we provide a neural network (NN) ensemble based active learning method to accelerate the local geometry optimization for multiple configurations simultaneously. We illustrate the acceleration on several case studies including bare metal surfaces, surfaces with adsorbates, and nudged elastic band for two reactions. In all cases, the accelerated method requires fewer DFT calculations than the standard method. In addition, we provide an Atomic Simulation Environment (ASE)-optimizer Python package to make the usage of the NN ensemble active learning for geometry optimization easier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Constrained nuclear–electronic orbital method for periodic density functional theory: Application to H 2 chemisorption on Si(001) surfaces

The nuclear–electronic orbital (NEO) method provides a powerful computational framework for incorporating nuclear quantum effects (NQE) in electronic structure calculations beyond the Born–Oppenheimer approximation. By incorporating additional constraints to the position operator on quantum particles like protons, the NEO method enables calculation of effective potential that accounts for NQE. Here, in this work, we present a new constrained NEO (cNEO) formulation for density functional theory (cNEO-DFT) calculations in the context of extended periodic systems. Using the nudged elastic band method, we discuss an application of the cNEO-DFT approach to studying the adsorption of a hydrogen molecule on the Si(001) surfaces. The calculation shows how NQE impacts the reaction energetics. The proton density changes are computed along the reaction pathways. This work demonstrates the capability of the new cNEO-DFT method to study a wide range of chemical processes, such as surface reactions where the quantum nature of light atoms like protons is non-negligible.

Chemical processes↗
DOE OSTI2025

The mechanics of nucleation and growth and the surface tensions of active matter

Homogeneous nucleation, a textbook transition path for phase transitions, is typically understood on thermodynamic grounds through the prism of classical nucleation theory. However, recent studies have suggested the applicability of classical nucleation theory to systems far from equilibrium. Here, in this article, we formulate a purely mechanical perspective of homogeneous nucleation and growth, elucidating the criteria for the properties of a critical nucleus without appealing to equilibrium notions. Applying this theory to active fluids undergoing motility-induced phase separation, we find that nucleation proceeds in a qualitatively similar fashion to equilibrium systems, with concepts such as the Gibbs–Thomson effect and nucleation barriers remaining valid. We further demonstrate that the recovery of such concepts allows us to extend classical theories of nucleation rates and coarsening dynamics to active systems upon using the mechanically derived definitions of the nucleation barrier and surface tensions. Three distinct surface tensions—the mechanical, capillary, and Ostwald tensions—play a central role in our theory. While these three surface tensions are identical in equilibrium, our work highlights the distinctive role of each tension in the stability of active interfaces and the nucleation and growth of motility-induced phases.

Capillary waves↗
DOE OSTI2024

Thermodynamic driving forces in contact electrification between polymeric materials

Abstract Contact electrification, or contact charging, refers to the process of static charge accumulation after rubbing, or even simple touching, of two materials. Despite its relevance in static electricity, various natural phenomena, and numerous technologies, contact charging remains poorly understood. For insulating materials, even the species of charge carrier may be unknown, and the direction of charge-transfer lacks firm molecular-level explanation. Here, we use all-atom molecular dynamics simulations to investigate whether thermodynamics can explain contact charging between insulating polymers. Based on prior work suggesting that water-ions, such as hydronium and hydroxide ions, are potential charge carriers, we predict preferred directions of charge-transfer between polymer surfaces according to the free energy of water-ions within water droplets on such surfaces. Broad agreement between our predictions and experimental triboelectric series indicate that thermodynamically driven ion-transfer likely influences contact charging of polymers. Furthermore, simulation analyses reveal how specific interactions of water and water-ions proximate to the polymer-water interface explain observed trends. This study establishes relevance of thermodynamic driving forces in contact charging of insulators with new evidence informed by molecular-level interactions. These insights have direct implications for future mechanistic studies and applications of contact charging involving polymeric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Competing ferro- and antiferromagnetic exchange drives shape-selective $\mathrm{Co_3O_4}$ nanomagnetism

We have synthesized three different shapes of Co 3 O 4 nanoparticles to investigate the relationships between the surface Co 2+ and Co 3+ bonding quantified by exploiting the known exposed surface planes, terminations, and coordiations of Co 3 O 4 nanoparticle spheres, cubes and plates. Subsequently this information is related to the unusual behaviour observed in the magnetism. The competition of exchange interactions at the surface provides the mechanism for different behaviours in the shapes. The cubes display weakened antiferromagnetic interactions in the form of a spin-flop that occurs at the surface, while the plates show distinct ferromagnetic behaviour due to the strong competition between the interactions. We elucidate the spin properties which are highly sensitive to bonding and crystal field environments. This work provides a new window into the mechanisms behind surface magnetism.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Force field for calcium sulfate minerals to predict structural, hydration, and interfacial properties

Calcium sulfates such as anhydrite, hemihydrate, and gypsum find widespread use in building materials, implants, and tissue healing. We introduce a simple and compatible atomistic force field for all calcium sulfate phases that reproduces a wide range of experimental data including lattice parameters, surface, hydration, mechanical, and thermal properties in 1% to 5% accuracy relative to experiments. The performance is several times better than prior force fields and DFT methods, which lead to errors in structures and energies up to 100%. We explain (hkl) cleavage energies, the dynamics of (hkl) water interfaces, and new insights into molecular origins of crystal-facet specific hydration and solubility. Impressive agreement of computed and experimentally measured hydration energies is shown. The models add to the Interface force field (IFF) and are compatible with multiple force fields (CHARMM, AMBER, GROMOS, CVFF, PCFF, OPLS-AA) for property predictions of sulfate-containing materials from atoms to the large nanometer scale.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of Surface Treatment on the Interfacial and Mechanical Performance of Metal-Insert Overmolded Composites

Structural composites with metal inserts are gaining increasing interest enabling light weight design for energy efficiency, provide insulation, corrosion protection without compromising mechanical integrity. Such over molded metal-polymer composites show strong potential in many automotive and aerospace component parts, e.g. car bumper, chassis, door, brackets, fasteners, etc. Despite several advantages, metal-polymer dissimilar interface remains a weak spot in structural design, requiring further investigation to improve interfacial interlocking. The current work focuses on enhancing the metal-polymer adhesion between stainless steel inserts and polymer matrices (e.g. acrylonitrile butadiene styrene resin (ABS), and polyamide 66 (PA66) through surface treatment via chemical etching and mechanical roughening. In the chemical etching process, metal substrates were treated with aqua regia solution for different time intervals to evaluate surface roughness measured by water contact angle and morphology analysis. For mechanical roughening approach, metal inserts were subjected to blasting for surface abrasion. Treated samples were also functionalized with aminosilane coupling agent which showed successful grafting on the surface measured by water contact angle. Metal inserts with micro level surface roughness through etching exhibited significant 21% improvement in adhesion strength compared to untreated inserts; however, the effect of silane treatment on the interfacial strength was found to be highly matrix dependent.

Saha, Subhabrata [ORNL] (ORCID:000000033966064X)↗
DOE OSTI2024

Modeling scale-up of particle coating by atomic layer deposition

Atomic layer deposition (ALD) is a promising technique to functionalize particle surfaces for energy applications including energy storage, catalysis, and decarbonization. In this work, we present a set of models of ALD particle coating to explore the transition from lab scale to manufacturing. Our models encompass the main particle coating manufacturing approaches including rotary bed, fluidized bed, and continuously vibrating reactors. These models provide key metrics, such as throughput and precursor utilization, required to evaluate the scalability of ALD manufacturing approaches and their feasibility in the context of energy applications. Our results show that designs that force the precursor to flow through fluidized particles transition faster to a transport-limited regime where throughput is maximized. They also exhibit higher precursor utilization. In the context of continuous processes, our models indicate that it is possible to achieve self-extinguishing processes with almost 100% precursor utilization. A comparison with past experimental results of ALD in fluidized bed reactors shows excellent qualitative and quantitative agreement.

25 ENERGY STORAGE↗
DOE OSTI2021

Boosting CO 2 Electrochemical Reduction with Atomically Precise Surface Modification on Gold Nanoclusters

Thiolate-protected gold nanoclusters (NCs) are promising catalytic materials for the electrochemical CO 2 reduction reaction (CO 2 RR). In this work an atomic level modification of a Au 23 NC is made by substituting two surface Au atoms with two Cd atoms, and it enhances the CO 2 RR selectivity to 90–95 % at the applied potential between -0.5 to -0.9 V, which is doubled compared to that of the undoped Au 23 . Additionally, the Cd-doped Au 19 Cd 2 exhibits the highest CO 2 RR activity (2200 mA mg -1 at -1.0 V vs. RHE) among the reported NCs. This synergetic effect between Au and Cd is remarkable. Density-functional theory calculations reveal that the exposure of a sulfur active site upon partial ligand removal provides an energetically feasible CO 2 RR pathway. The thermodynamic energy barrier for CO formation is 0.74 eV lower on Au 19 Cd 2 than on Au 23 . Here these results reveal that Cd doping can boost the CO 2 RR performance of Au NCs by modifying the surface geometry and electronic structure, which further changes the intermediate binding energy. This work offers insights into the surface doping mechanism of the CO 2 RR and bimetallic synergism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗