Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Electron beam injection from a hollow cathode plasma into a downstream reactive environment: Characterization of secondary plasma production and Si 3 N 4 and Si etching

A material etching system was developed by combining beam electron injection from a direct current (DC) hollow-cathode (HC) electron source with the downstream reactive environment of a remote CF 4 /O 2 low temperature plasma. The energy of the injected beam electrons is controlled using an acceleration electrode biased positively relative to the HC Argon discharge. For an acceleration voltage greater than the ionization potential of Ar, the extracted primary electrons can produce a secondary plasma in the process chamber. We characterized the properties of the secondary plasma by performing Langmuir probe measurements of the electron energy probability function (EEPF) 2.5 cm below the extraction ring. The data indicate the existence of two major groups of electrons, including electrons with a primary beam electron energy which varies as the acceleration voltage is varied, along with low energy electrons produced by ionization of the Ar gas atoms in the process chamber by the injected beam electrons. When combining the HC Ar beam electron with a remote CF 4 /O 2 electron cyclotron wave resonance (ECWR) plasma, the EEPF of both the low energy plasma electron and beam electron components decreases. Additionally, we studied surface etching of Si3N4 and poly-crystalline Si (poly-Si) thin films as a function of process parameters, including the acceleration voltage (0-70 V), discharge current of the HC discharge (1-2 A), pressure (2- 100 mTorr), source to substrate distance (2.5 to 5 cm), and feed gas composition (with or without CF 4 /O 2 ). The direction of the incident beam electrons was perpendicular to the surface. Si 3 N 4 and poly-crystalline silicon etching are seen and indicate an electronneutral synergy effect. No/little remote plasma spontaneous etching was observed for the conditions used in this study, and the etching is confined to the substrate area irradiated by the injected beam electrons. The electron etched Si 3 N 4 surface etching rate profile distribution is confined within a ~30 mm diameter circle, which is slightly broader than the area for which poly-Si etching is seen, and coincides closely with the spatial profile of beam electrons as determined by the Langmuir probe measurements. The magnitude of poly-Si etching rate is by a factor of two times smaller than the Si 3 N 4 etching rate. In this paper, we discuss possible explanations of the data and the role of surface charging.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Probing Interfacial Reaction Pathways in Atomic Layer Deposition on Sulfide Superionic Conductors

Sulfide superionic conductors (e.g., argyrodite Li 6 PS 5 Cl, LPSCl) are extremely promising for all solid-state batteries, but poor atmospheric stability and high interfacial reactivity limit widespread adoption. Coating LPSCl powders with ultrathin coatings using atomic layer deposition (ALD) mitigates these problems, protecting against atmospheric degradation and reducing reactivity with Li metal, yielding more stable cycling. Despite significant promise, the ALD mechanism is unknown, hampering the development of new coating chemistries. In this study, we elucidate the mechanism for Al 2 O 3 ALD on LPSCl using trimethyl aluminum (TMA) and H 2 O by combining in situ Fourier transform infrared spectroscopy, ex situ solid-state magic angle spinning nuclear magnetic resonance, UV Raman spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. We determine that ALD Al 2 O 3 nucleates promptly via TMA reaction with native —OH, —SH, and PS 3 -OH groups to form transient C–Al–O(S) species that are rapidly hydrolyzed during the subsequent H 2 O exposure. This reversible transformation maintains surface nucleophilicity and prevents sulfide decomposition. The resulting layer-by-layer growth leads to highly conformal Al 2 O 3 coatings on LPSCl that are readily scalable to ≥ 50 g quantities using a rotating drum fixture. This detailed understanding of ALD surface reactions provides critical insights guiding the selection of future ALD chemistries with improved performance.

atomic layer deposition↗
DOE OSTI2021

Nitrogen-doped char as a catalyst for wet oxidation of phenol-contaminated water

Catalytic wet oxidation (CWO) of aqueous effluents rich in organic compounds is a very promising technology for the treatment of liquid wastes from biomass conversion processes. CWO reactions occur through the formation of free radical species, produced in the presence of an oxidant, which act on organic contaminates in the effluent. Although the reaction is well known, there exists a lack of affordable catalysts to conduct this process at the lower temperatures and pressures in novel bioenergy processes. Here, this study assessed the catalytic effect of nitrogen-doped chars as such an option. Phenol in aqueous solution was used as a model waste effluent. Treatment was conducted at moderate temperatures (190 to 260 °C), oxygen partial pressure of 1 MPa, and reaction times of 15, 30, and 45 min in stainless steel and glass-lined tube reactors. High pressure liquid chromatography (HPLC) analyses of the products quantified phenol and by-product concentrations used in the calculation of reaction activation energy. The char catalyst was studied by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) in order to gain insight into its structure and surface composition. The results indicate that nitrogen-doped char catalysts accelerate the oxidation of phenol by decreasing its reaction activation energy from 82.2 kJ/mol (non-catalyzed) to 40.4 kJ/mol (catalyzed). An analysis from first principles using density functional theory (DFT) was conducted to ascertain which N functional group has the most significant impact on free radical formation in the presence of oxygen. Among all the N functional groups studied, the dipyridinic functional groups showed the most promising characteristics to facilitate the formation of hydroxyl free radicals.

Advanced Oxidation Processes for Organic Pollutant↗
DOE OSTI2021

Janus Nanocages of Platinum-Group Metals and Their Use as Effective Dual-Electrocatalysts

Janus nanocages with distinctive platinum-group metals on the outer and inner surfaces can naturally catalyze at least two different reactions. In this work, we report a general method based on successive deposition and then selective etching for the facile synthesis of such nanocages. Herein, we have fabricated 11 different types of Janus nanocages characterized by a uniform size and well-defined {100} facets, together with porous, ultrathin, asymmetric walls up to 1.6 nm thick. When tested as dual-electrocatalysts toward oxygen reduction and evolution reactions, the Janus nanocages based on Pt and Ir exhibited superior activities depending on the thickness and relative position of the metal layer. Density functional theory studies suggest that the alloy composition and surface structure of the nanocages both play important roles in enhancing the electrocatalytic activities by modulating the stability of key reaction intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Explicit entropic proofs of irreversibility theorems for holographic RG flows

We revisit the existence of monotonic quantities along renormalization group flows using only the Null Energy Condition and the Ryu-Takayanagi formula for the entanglement entropy of field theories with anti-de Sitter gravity duals. In particular, we consider flows within the same dimension and holographically reprove the c-, F -, and a-theorems in dimensions two, three, and four. We focus on the family of maximally spherical entangling surfaces, define a quasi-constant of motion corresponding to the breaking of conformal invariance, and use a properly defined distance between minimal surfaces to construct a holographic c-function that is monotonic along the flow. We then apply our method to the case of flows across dimensions: there, we reprove the monotonicity of flows from AdS D+1 to AdS 3 and prove the novel case of flows from AdS 5 to AdS 4 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Altered morphology and diffusivity of water confined in MXenes: Machine learning–accelerated computations combined with experiments

Nanoconfined water exhibits unique properties compared to bulk water due to limited quantities, frustrated hydrogen bonding, and surface interactions, which are fundamental for energy storage and transport applications. We integrate machine learning–accelerated ab initio molecular dynamics with x-ray diffraction (XRD) and inelastic neutron scattering (INS) to systematically analyze the thermodynamic and dynamic behavior of water confined between functionalized (-F, -O, and -OH) two-dimensional (2D) Ti 3 C 2 T x MXene layers. As water intercalates between layers, the interlayer spacing exhibits layer-dependent staging characteristics. The water polarization can be flipped by the count and morphology of intercalated molecules interacting with MXene surface groups, resulting in varying electrostatic potential profiles. On the basis of interfacial electrostatic potential, hydrogen bond lifetime, and molecular orientation, we establish a linear combination of exponential model describing water diffusivity. These computational insights align well with experimental x-ray and neutron measurements, suggesting strategies for tuning water morphology and transport by tailoring MXene surface chemistry and water content for electrochemical energy storage and nanofluidic applications.

Tang, Jiawei [Southeast Univ., Nanjing (China)] (O↗
DOE OSTI2023

Development of a molecularly informed biogeochemical framework for reactive transport modeling of subsurface carbon inventories, transformations and fluxes (Final Report)

The overall objective of the project was to combine new molecular-level characterization strategies with soil carbon flux measurements to develop and evaluate model representations of subsurface carbon cycling. We expanded on existing studies in the East River watershed, Colorado, in collaboration with the Berkeley Lab Watershed Function Scientific Focus Area (SFA), SLAC Groundwater Quality SFA, and Rocky Mountain Biological Laboratory (RMBL) to develop an elevation and vegetation gradient that is now the subject of long-term monitoring by the USGS. To achieve the overall objective, we combined field studies of soil respiration with laboratory analyses, ranging from spectroscopy to incubation studies. This combination of techniques enabled us to develop a new understanding of the drivers of high-elevation soil respiration. In the process, we developed three new modeling approaches that improve our ability to conceptualize and ultimately to represent soil respiration in numerical models. The first approach is a plot-scale transient inverse model that can be used to determine in situ CO 2 production rates from measured concentration profiles and surface fluxes. Application of this method revealed the importance of plant phenology and deep CO 2 production in moderating CO 2 fluxes to the atmosphere. The second modeling approach is a molecular-scale tool that enables spectroscopic and elemental data for carbon speciation to be transformed into functional group abundances, or the ‘SOC-fga model’. This method uniquely enables carbon speciation to be tracked within a reactive transport framework to partition carbon among different pathways and storage zones within the soil. The third modeling tool builds strongly on the previous approaches and captures the microbial processes driving heterotrophic respiration. This ‘dormancy model’ allows the native soil microbial population to respond transiently to the presence or absence of water in order to catalyze carbon respiration. This approach was also compared to the simpler and more widely used first-order model using two experimental datasets with different temporal and spatial resolutions. Our results illustrate that the simpler first order model provides a robust and efficient representation of deep (>1 meter) soil respiration, but that shallow soils, where most respiration occurs, require explicit representation of moisture-dependent activation and dormancy rates. By assessing soil organic carbon turnover at multiple scales, we see a complex array of controls emerge. Atte scale of a hillslope, spatial heterogeneity in soil respiration rates dominates and is uncorrelated with instantaneous soil moisture and plant community. At the profile scale, the balance between plant inputs and water availability is the dominant control. At the microbial to molecular scale, physiological processes associated with carbon use and carbon speciation are important controls. These scale-dependent controls emphasize the need for new modeling approaches that examine their interactions and hierarchies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions

This work highlights the design and synthesis of bifunctional mesoporous silicate – polymer composite dual acid–base supported cascade catalysts. Compartmentalization of the two incompatible active sites is sought by segregating acid sites on the silica surface, and base sites within polymer chains and/or polymer domains. The ability to isolate and segregate active sites via control of the mesoporous silica pore size and polymer molecular weight is probed with silica samples functionalized by a grafting-to process. Supplemental activator and reducing agent (SARA) atom transfer radical polymerization is used to synthesize random copolymers containing protected primary amines. Thiol–ene ‘click’ chemistry facilitates silica functionalization via a convergent approach, with the ene-functionalized polymer end group and silica-grafted thiols forming SBA/MCM-SH-poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione). Polymer deprotection and thiol oxidation produces primary amine/sulfonic acid containing composite catalysts. With the polymer supported Lewis base and silica grafted Brønsted acid, the two-step deacetalization – Knoevenagel condensation cascade is explored to assess the ability of these polymer/silica hybrids to segregate active sites, allowing both acid and base site accessibility. Six composite catalysts are synthesized and tested in individual and cascade reactions with kinetic results demonstrating that lower molecular weight SBA-15-P1 and MCM-41-P1 catalysts outperform (higher turnover frequencies and initial rates) their higher molecular weight analogues, as well as a polymer-free system containing molecular active sites dispersed on the silica surface. Higher molecular weight composite catalysts perform more poorly due to limited chain solubility, mass transfer limitations, and poor catalyst accessibility. In many cases, the polymer chains effectively thread into the mesopores, with higher molecular weight polymers leading to pore blockage and inhibited mass transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Functionalized Silicon Particles for Enhanced Half- and Full-Cell Cycling of Si-Based Li-Ion Batteries

Vinylene carbonate (VC) and polyethylene oxide (PEO) have been investigated as functional agents that mimic the solid electrolyte interphase (SEI) chemistry of silicon (Si). VC and PEO are known to contribute to the stability of Si-based lithium-ion batteries as an electrolyte additive and as a SEI component, respectively. In this work, covalent surface functionalization was achieved via a facile route, which involves ball-milling the Si particles with sacrificial VC and PEO. Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy indicate that the additives are strongly bound to Si. In particular, MAS NMR shows Si–R or Si–O–R groups, which confirm functionalization of the Si after milling in VC or PEO. Particle size analysis by dynamic light scattering reveals that the additives facilitate particle size reduction and that the functionalized particles result in more stable dispersions based on zeta potential measurements. Raman mapping of the electrodes fabricated from the VC and PEO-coated active material with a polyacrylic acid (PAA) binder reveals a more homogenous distribution of Si and the carbon conductive additive compared to the electrodes prepared from the neat Si. Furthermore, the VC-milled Si strikingly exhibited the highest capacity in both half- and full-cell configurations, with more than 200 mAh g –1 measured capacity compared to the neat Si in the half-cell format. This is linked to an improved electrode processing based on the Raman and zeta potential measurements as well as a thinner SEI (with more organic components for the functionalized Si relative to the neat Si) based on XPS analysis of the cycled electrodes. In conclusion, the effect of binder was also investigated by comparing PAA with P84 (polyimide type), where an increased capacity is observed in the latter case.

25 ENERGY STORAGE↗
DOE OSTI2025

Selective Adsorption of Thiol-Containing Molecules on Copper Sulfide Surfaces via Molecule–Surface Disulfide Bridges

Recent results in the fields of nanoenhanced agriculture and expanding interest in prebiotic chemistry have placed increased emphasis on understanding the chemically selective interaction of small molecules with the surfaces of metal sulfides. Here, we present an integrated experimental and computational study of the interaction of thiol-containing molecules with copper sulfide (covellite) surfaces in aqueous media. In situ Fourier-transform infrared (FTIR) measurements and ex situ X-ray photoelectron spectroscopy (XPS) measurements show that molecules bearing free thiol groups, including glutathione and cysteine, bind strongly to CuS (covellite) nanoparticles and to CuS (001) single crystals, while control studies show that similar molecules lacking the free thiol group exhibit much less binding. Additional experiments show that these thiol-containing molecules interact transiently with CuO nanoparticle surfaces but are readily removed by rinsing. The FTIR and XPS experiments demonstrate that adsorption of molecular thiols to CuS surfaces occurs in a chemically selective manner. Further experimental studies and density functional calculations show that the preferred mode of binding is through the surface S atoms, forming a Solid–S–S–Molecule disulfide linkage. While the role of disulfide linkages in controlling structure and function of proteins and other biomolecules is widely known, the formation of surface disulfide linkages as a motif for covalent molecular binding at surfaces has not been established previously.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2020

Barrier film, method of making the barrier film, and articles including the barrier film

A barrier film that includes a substrate, a first polymer layer on a major surface of the substrate, an oxide layer on the first polymer layer, and a second polymer layer on the oxide layer. At least one of the first or second polymer layers includes a siloxane reaction product of a secondary or tertiary amino-functional silane having at least two silane groups. A method of making the barrier film and articles and a barrier assembly including the barrier film are also disclosed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural, Criticality, and Radiation Dose Calculations to support SNF Loading into a DOE Standard Canister

The DOE Standard Canister Demonstration Project includes the development of an internal support structure (ISS) for the 4.6-m long and 45.7-cm diameter canister. This study presents structural evaluations, criticality safety assessments, and dose rate calculations conducted within the scope of the ISS design process to support smooth canister loading operations and to ensure safe storage, transportation, and disposal of Peach Bottom 1 Core II (PB2) and Fort St. Vrain (FSV) SNF, currently stored at the CPP-603 facility of the INL. The ISS includes a 316L stainless steel basket that holds twelve PB2 SNF rods. Further, six individual, 78.7-cm long, 316L stainless steel columns are equally spaced and welded to the inner canister wall at the lower end of the shell. These columns represent the FSV basket and can hold one FSV SNF element. An A92014 T6 aluminum spacer disc is bolted to the bottom plate of the PB2 basket to vertically restrain the FSV SNF element after the PB2 basket is placed inside the canister on top of the FSV basket. The structural evaluations of the ISS followed applicable ASME BPVC.III.3 guidelines and included finite element (FE) analyses of the PB2 basket structure; analyses of welds and bolds; buckling analyses of selected components, and acceptability assessments of the expected basket deformations under loading operations. The criticality safety assessments used the Monte Carlo N-Particle (MCNP) software architecture version 6.2 including ENDF/B-V continuous energy cross-section libraries, considering intact SNF in a single storage overpack or two multi-storage overpack configurations, and intact or failed SNF configured for disposal. The dose rate computations are based on source terms taken from the DOE Spent Fuel Database. The isotopic composition was decay corrected for the year 2022 using the ORIGEN module in the SCALE suite. A 19-group photon spectrum and 27-group neutron-source spectra were generated and used in MCNP to calculate estimated dose-equivalent rates, both on DOE Standard Canister contact and at a radial distance of from the canister surface. The results of this study indicate a structurally sound system that can uphold its criticality safety functions throughout its intended operational phases. Further, they increase confidence that sufficient radiological protection is technically achievable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

The Generality of the GUGA MRCI Approach in COLUMBUS for Treating Complex Quantum Chemistry

The core part of the program system COLUMBUS allows highly efficient calculations using variational multireference (MR) methods in the framework of configuration interaction with single and double excitations (MR-CISD) and averaged quadratic coupled-cluster calculations (MR-AQCC), based on uncontracted sets of configurations and the graphical unitary group approach (GUGA). The availability of analytic MR-CISD and MR-AQCC energy gradients and analytic nonadiabatic couplings for MR-CISD enables exciting applications including, e.g., investigations of π-conjugated biradicaloid compounds, calculations of multitudes of excited states, development of diabatization procedures, and furnishing the electronic structure information for on-the-fly surface nonadiabatic dynamics. With fully variational uncontracted spin-orbit MRCI, COLUMBUS provides a unique possibility of performing high-level calculations on compounds containing heavy atoms up to lanthanides and actinides. Crucial for carrying out all of these calculations effectively is the availability of an efficient parallel code for the CI step. Configuration spaces of several billion in size now can be treated quite routinely on standard parallel computer clusters. Emerging developments in COLUMBUS, including the all configuration mean energy multiconfiguration self-consistent field method and the graphically contracted function method, promise to allow practically unlimited configuration space dimensions. Spin density based on the GUGA approach, analytic spin-orbit energy gradients, possibilities for local electron correlation MR calculations, development of general interfaces for nonadiabatic dynamics, and MRCI linear vibronic coupling models conclude this overview.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Multifunctional Thiol-Containing Additives for Improved Photoluminescence and Photovoltaic Performance of Cs 0.15 FA 0.85 PbI 3 Perovskites

Thiol containing molecules as both interfacial surface ligands and additives are promising modulators for enhancing photoluminescence (PL) properties, stability, and photovoltaic (PV) performance of metal halide perovskites. However, alkanethiols are much more effective for improving photoluminescence (PL) intensity and stability in metal halide perovskite nanocrystals than in their thin film analogues. Herein, we investigate how additional functional groups on a pyrimidine core can alter thiol reactivity and influence the PL, stability, and PV performance of organic metal halide perovskites. Through an investigation of five different pyrimidine derivatives, it is shown that all derivatives containing thiol groups form thiolates in the presence of the perovskite precursors and increase the photoluminescence intensity of the perovskite film. The largest all-around improvement to the PL intensity, stability, and photovoltaic performance of Cs 0.15 FA 0.85 PbI 3 perovskites is realized through the addition of a hydroxyl group combined with a trifluoromethyl group to form 4-hydroxy-6-(trifluoromethyl)pyrimidine-2-thiol. Furthermore, this investigation helps illuminate how combinations of functional groups can be employed to further increase the beneficial effects over monofunctional additives in organic metal halide perovskites.

14 SOLAR ENERGY↗
DOE OSTI2020

Probing Heterogeneous Charge Distributions at the α-Al 2 O 3 (0001)/H 2 O Interface

Unlike metal or semiconductor electrodes, the surface charge resulting from the protonation or deprotonation of insulating mineral oxides is highly localized and heterogeneous in nature. In this work the Stark active C≡N stretch of potassium thiocyanate is used as a molecular probe of the heterogeneity of the interfacial electrostatic potential at the α-Al 2 O 3 (0001)/H 2 O interface. Vibrational sum frequency generation (vSFG) measurements performed in the OH stretching region suggest that thiocyanate species organize interfacial water similarly to halide ions. Changes in the electrostatic potential are then tracked via Stark shifts of the vibrational frequency of the thiocyanate stretch. Our vSFG measurements show that we can simultaneously measure the vSFG response of SCN – ions experiencing charged and neutral surface sites. We assign local potentials of +308 and -154 mV to positively and negatively charged aluminol groups that are present at pH = 4 and pH = 10, respectively. Thiocyanate anions at positively charged surface sites and negatively charged surface sites and those participating in contact ion pairing adopt similar orientations and are oppositely oriented relative to thiocyanate ions near neutral surface sites. All four species followed Langmuir adsorption isotherms. Density functional theory–molecular dynamics (DFT-MD) simulations of SCN – near the neutral α-Al 2 O 3 (0001)/H 2 O interface show that the vSFG response in the C≡N stretch region originates from a SCN–H–O–Al complex, suggesting the surface site specificity of these experiments. To our knowledge this is the first spectroscopic measurement of local potentials associated with a heterogeneously charged surface. The ability to probe the evolution of local charges in situ could provide vital insight into many industrial, electrochemical, and geochemically relevant interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural, Criticality, and Radiation Dose Calculations to Support SNF Loading into a DOE Standard Canister

The DOE Standard Canister Demonstration Project includes the development of an internal support structure (ISS) for the 4.6-m-long and 45.7-cm-diameter canister. This study presents structural evaluations, criticality safety assessments, and dose rate calculations conducted within the scope of the ISS design process to support smooth canister loading operations and to ensure safe storage, transportation, and disposal of Peach Bottom 1 Core II (PB2) and Fort St. Vrain (FSV) SNF, currently stored at INL’s CPP-603 facility. The ISS includes a 316L stainless-steel basket that holds 12 PB2 SNF rods. The PB2 basket rests on top of six individual, 78.7-cm-long, 316L stainless-steel columns that are equally spaced and welded to the inner canister wall at the lower end of the shell. These columns represent the FSV basket and can hold one FSV SNF element. An A92014 T6 aluminum spacer disc is bolted to the bottom plate of the PB2 basket to vertically restrain the FSV SNF element after the PB2 basket is placed inside the canister above the FSV basket. The structural evaluations of the ISS followed applicable ASME BPVC.III.3 guidelines and included finite element (FE) analyses of the PB2 basket structure; analyses of welds and bolds; buckling analyses of selected components, and acceptability assessments of the expected basket deformations under loading operations. The criticality safety assessments used the Monte Carlo N-Particle (MCNP) software architecture Version 6.2, including ENDF/B-V continuous-energy cross-section libraries, considering intact SNF in a single storage overpack or two multistorage overpack configurations and intact or failed SNF configured for disposal. The dose rate computations are based on source terms taken from the DOE Spent Fuel Database. The isotopic composition was decay corrected for the year 2022 using the ORIGEN module in the SCALE suite. A 19-group photon spectrum and a 27-group neutron-source spectrum were generated and used in MCNP to calculate estimated dose-equivalent rates, both on DOE Standard Canister contact and at a radial distance of 1 m from the canister surface. The results of this study indicate a structurally sound system that can uphold its criticality safety functions throughout its intended operational phases. Furthermore, this study provides confidence that sufficient radiological protection is technically achievable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Coupled Experimental–Theoretical Characterization of a Carbon Electrode in Vanadium Redox Flow Batteries using X-ray Absorption Spectroscopy

Vanadium redox flow batteries (VRFBs) have emerged as promising solutions for stationary grid energy storage due to their high efficiency, scalability, safety, near room-temperature operation conditions, and the ability to independently size power and energy capacities. The performance of VRFBs heavily relies on the redox couple reactions of V 2+ /V 3+ and VO 2+ /VO 2 + on carbon electrodes. Therefore, a thorough understanding of the surface functionality of carbon electrodes and their propensity for degradation during electrochemical cycles is crucial for designing VRFBs with extended lifespans. In this study, we present a coupled experimental–theoretical approach based on carbon K edge X-ray absorption spectroscopy (XAS) to characterize carbon electrodes prepared under different conditions and identify relevant functional groups that contribute to unique spectroscopic features. Atomic models were created to represent functional groups, such as hydroxyl, carboxyl, methyl, and aldehyde, bonded to carbon atoms in either sp 2 or sp 3 environments. The interactions between functionalized carbon and various solvated vanadium complexes were modeled using density functional theory. A library of carbon K-edge XAS spectra was generated for distinct carbon atoms in different functional groups, both before and after interacting with solvated vanadium complexes. Here we demonstrate how these simulated spectra can be used to deconvolve ex situ experimental spectra measured from carbon electrodes and to track changes in the electrode composition following immersion in different electrolytes or extended cycling within a functional VRFB. By doing so, we identify the active species present on the carbon electrodes, which play a crucial role in determining their electrochemical performance.

25 ENERGY STORAGE↗