Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Structure of the Photo-catalytically Active Surface of SrTiO 3

A major goal of energy research is to use visible light to cleave water directly, without an applied voltage, into hydrogen and oxygen. Although SrTiO 3 requires ultraviolet light, after four decades, it is still the "gold standard" for the photo-catalytic splitting of water. It is chemically robust and can carry out both hydrogen and oxygen evolution reactions without an applied bias. While ultrahigh vacuum surface science techniques have provided useful insights, we still know relatively little about the structure of these electrodes in contact with electrolytes under operating conditions. Here, we report the surface structure evolution of a n-SrTiO 3 electrode during water splitting, before and after "training" with an applied positive bias. Operando high-energy X-ray reflectivity measurements demonstrate that training the electrode irreversibly reorders the surface. Scanning electrochemical microscopy at open circuit correlates this training with a 3-fold increase of the activity toward the photo-induced water splitting. A novel first-principles joint density functional theory simulation, constrained to the X-ray data via a generalized penalty function, identifies an anatase-like structure as the more active, trained surface.

36 MATERIALS SCIENCE↗

Multifunctional Silicon Surfaces: Reaction of Dichlorocarbene Generated from Seyferth Reagent with Hydrogen-Terminated Silicon (111) Surfaces

Insertion of dichlorocarbene (:CCl2), generated by decomposition of the Seyferth reagent PhHgCCl2Br, into the Si-H bond of a tertiary silane to form a Si-CCl2H group is an efficient homogeneous, molecular transformation. A heterogeneous version of this reaction, between PhHgCCl2Br and a silicon (111) surface terminated by tertiary Si-H bonds, was studied using a combination of surface-sensitive infrared and X-ray photoelectron spectroscopies. The insertion of dichlorocarbene into surface Si-H bonds parallels the corresponding reaction of silanes in solution, to produce surface-bound dichloromethyl groups (Si-CCl2H) covering ∼25% of the silicon surface sites. A significant fraction of the remaining Si-H bonds on the surface was converted to Si-Cl/Br groups during the same reaction, with PhHgCCl2Br serving as a halogen atom source. The presence of two distinct environments for the chlorine atoms (Si-CCl2H and Si-Cl) and one type of bromine atom (Si-Br) was confirmed by Cl 2p, Br 3d, and C 1s X-ray photoelectron spectroscopy. The formation of reactive, halogen-terminated atop silicon sites was also verified by reaction with sodium azide or the Grignard reagent (CH3MgBr), to produce Si-N3 or Si-Me functionalities, respectively. Thus, reaction of a hydrogen-terminated silicon (111) surface with PhHgCCl2Br provides a facile route to multifunctional surfaces possessing both stable silicon-carbon and labile silicon-halogen sites, in a single pot synthesis. The reactive silicon-halogen groups can be utilized for subsequent transformations and, potentially, the construction of more complex organic-silicon hybrid systems.

Liu, Wenjun↗

Effects of groundwater pumping on ground surface temperature: A regional modeling study in the North China Plain

Over-exploitation of groundwater (GW) in the North China Plain (NCP) since the 1960s has many environmental consequences. However, understanding of the dominant mechanisms remains limited, particularly at regional scale. In this study, the coupled ParFlow.CLM model representing subsurface and land-surface processes and their interactions was applied in the NCP at high spatio-temporal resolutions. The model was validated using the water and energy fluxes reported in previous studies and from the JRA-55 reanalysis. Numerical experiments were designed to examine the relative impacts of GW pumping and irrigation on the ground surface temperature (GST). Results show significant effects of GW pumping on GST in the NCP. Generally, the subsurface acts as a buffer to temporal variations in heat fluxes at the land-surface, but long-term pumping can gradually weaken this buffer, resulting in increases in the spatio-temporal variability of GST, as exemplified by hotter summers and colder winters. Considering that changes of water table depth (WTD) can significantly affect land surface heat fluxes when WTD ranges roughly between 0.01–10 m, the 0.5 m/year increase of WTD simulated by the model due to pumping can continue to increase the average WTD and hence, disturb GST, for about 20 years from the pre-pumping WTD in the NCP, before the WTD exceeds 10 m. The variations of GST are expected to be faster initially and gradually slow down due to the nonlinear behaviors of GST with WTD. The findings from this study in the NCP may also have implications for other regions with GW depletion.

Yang, Chen↗

Effect of the surface on the secondary structure of soft landed peptide ions

Ion soft landing (SL) enables highly selective modification of substrates for applications in materials science, nanotechnology and biology. Our previous study showed that SL can be used for preparation of conformation-selected peptide arrays. Here we present a first study of the effect of the surface on the secondary structures of peptides soft-landed onto self-assembled monolayer surfaces (SAMs). Conformations of soft-landed peptide ions were examined using the newly constructed instrument that enables in situ infrared reflection absorption spectroscopy (IRRAS) characterization of surfaces during and after ion deposition. Polyalanine peptides, Ac-AnK and Ac-KAn (n=7, 15), that have been extensively studied both in solution and in the gas phase were used as model systems in this study. We demonstrate that physical and chemical properties of SAM surfaces have a strong effect on the conformations of soft-landed peptides ions. For example, deposition of the α-helical [Ac-A15K+H]+ ion on the CH3-terminated (HSAM) surface results in immobilization of both the α- and 310-helical conformations. In contrast, a significant fraction of Ac-A15K molecules are present in the β-sheet conformation on the CF3- (FSAM) and COOH-terminated (COOH-SAM) surfaces. We show that the kinetic energy of the polyalanine ion, the charge, and the initial conformation have only a minor effect on the conformation of deposited species suggesting that the interaction between the molecule and the surface plays a major role in determining the secondary structures of immobilized polyalanines. This study demonstrates that SL of mass-selected ions can be utilized for obtaining fundamental understanding of the intrinsic properties of biomolecules and surfaces responsible for conformational changes upon adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational screening of dopants for photocatalytic two-electron reduction of CO 2 on anatase (101) surfaces

We have carried out first-principles calculations to explore reaction mechanisms of the 2e reduction of CO 2 to HCOOH or CO in photochemical reactions catalyzed by anatase (101) surface. Two energetically competitive reaction pathways to HCOOH were identified, which involve initial 1e (via bidentate) and 2e (via monodentate) reduction steps, respectively. The pathways of producing CO were also explored. From the electronic structure analysis, we have shown the role of the anatase surface in facilitating electron and proton transfer in CO 2 reduction. Based on the determined rate-limiting step, we have carried out screening of substitutional surface cation doping and found metallic elements that could substantially lower the reaction barriers. Finally, a simple model describing the relationship between the activation barriers and the binding energies of CO 2 - to the dopant surface site is proposed.

Environmental Molecular Sciences Laboratory↗

Surface influenced magnetostructural transition in FeRh films

Surface structural effects accompanying the antiferromagnetic-ferromagnetic magnetostructral transition of epitaxial FeRh thin films were investigated by grazing incidence x-ray scattering. Measurement of the film lattice parameters and variation of x-ray incident angles allow observation of the transition character on scales ranging from a few nm to the total through-thickness of the film. Out-of-plane lattice measurements confirm that the ferromagnetic phase nucleates from the surface during the heating process and is retained at the surface below the transition temperature during the cooling process. These results suggest that surface strain relief fosters nucleation of the ferromagnetic phase.

36 MATERIALS SCIENCE↗

The effect of polarity and surface states on the Fermi level at III-nitride surfaces

Surface states and their influence on the Fermi level at the surface of GaN and AlN are studied using x-ray photoelectron spectroscopy (XPS). The effect of polarity on surface electronic properties was studied. Accurate modeling of the valence band edge and comparison with XPS data revealed the presence of donor surface states at 1.4 eV and acceptor states at energies > 2.7 eV from the valence band in GaN. Al polar AlN showed acceptor states at energies > 3.3 eV. Density of acceptor surface states was estimated to be between 10(13) and 10(14) eV(-1) cm(-2) in both GaN and AlN. The shift in charge neutrality levels and barrier heights due to polarity and the density of surface states on AlN and GaN were estimated from XPS measurements. Theoretical modeling and comparison with XPS data implied full compensation of spontaneous polarization charge by charged surface states. Barrier height measurements also reveal a dependence on polarity with phi(metal-polar)>phi(non-polar)>phi(nitrogen-polar) suggesting that the N-polar surface is the most suitable for Ohmic contacts. (C) 2014 AIP Publishing LLC.

Reddy, P↗

Atomic scale study of surface orientations and energies of Ti 2 O 3 crystals

For nanostructured particles, the faceting planes and their terminating chemical species are two critical factors that govern their chemical behavior. In this paper, the surface atomistic structure and termination of Ti 2 O 3 crystals were analyzed using atomic-scale aberration-corrected scanning transmission electron microscopy (STEM) combined with density functional theory (DFT) calculations. STEM imaging reveals that the Ti 2 O 3 crystals are most often faceted along (001), (012), (-114), and (1–20) planes. The DFT calculation indicates that the (012) surface with TiO-termination has the lowest cleavage energy and correspondingly the lowest surface energy, indicating that (012) will be the most stable and prevalent surfaces in Ti 2 O 3 nanocrystals. Finally, these observations provide insights for exploring the interfacial process involving Ti 2 O 3 nanoparticles.

36 MATERIALS SCIENCE↗

Strong surface magnetic field generation in relativistic short pulse laser–plasma interaction with an applied seed magnetic field

Abstract While plasma often behaves diamagnetically, we demonstrate that the laser irradiation of a thin opaque target with an embedded target-transverse seed magnetic field B seed can trigger the generation of an order-of-magnitude stronger magnetic field with opposite sign at the target surface. Strong surface field generation occurs when the laser pulse is relativistically intense and results from the currents associated with the cyclotron rotation of laser-heated electrons transiting through the target and the compensating current of cold electrons. We derive a predictive scaling for this surface field generation, B gen ∼ −2 πB seed Δ x / λ 0 (in the large spot size limit), where Δ x is the target thickness and λ 0 is the laser wavelength, and conduct 1D and 2D particle-in-cell simulations to confirm its applicability over a wide range of conditions. We additionally demonstrate that both the seed and surface-generated magnetic fields can have a strong impact on application-relevant plasma dynamics, for example substantially altering the overall expansion and ion acceleration from a μ m-thick laser-irradiated target with a kilotesla-level seed magnetic field.

Weichman, K. (ORCID:0000000234877922)↗

Electronic structure and surface properties of MgB 2 (0001) upon oxygen adsorption [Electronic structure and surface properties of MgB2: oxygen adsorption on MgB2(0001)]

Here, we use density-functional theory to investigate the bulk and surface properties of MgB 2 . The unique bonding structure of MgB 2 is investigated by Bader's atoms-in-molecules, charge density difference, and occupancy projected band structure analyses. Oxygen adsorption on the charge-depleted surfaces of MgB 2 is studied by a surface potential energy mapping method, reporting a complete map including low-symmetry binding sites. The B-terminated MgB 2 (0001) demonstrates reconstruction of the graphenelike B layer, and the reconstructed geometry exposes a threefold site of the subsurface Mg, making it accessible from the surface. Detailed reconstruction mechanisms are studied by simulated annealing method based on ab initio molecular dynamics and nudged elastic band calculations. The surface clustering of B atoms significantly modifies the B 2p states to occupy low energy valence states. The present paper emphasizes that a thorough understanding of the surface phase may explain an apparent inconsistency in the experimental surface characterization of MgB 2 . Furthermore, these results suggest that the surface passivation can be an important technical challenge when it comes to development of a superconducting device using MgB 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modification of the surface of GaAs and observation of surface enhanced Raman scattering after the diffusion of indium

The results of studies of the surface of GaAs in the presence of indium and phosphorus surfactants are reported. It is shown that, as a result of their diffusion (annealing) at a temperature of 650–670°C, clusters enriched with indium are formed in the GaAs surface region. The clusters can be seen as bright spots in an image obtained by a scanning electron microscope with the use of an in-lens detector. At the same time, studies of the morphology of this surface with an atomic-force microscope show a decrease in the root-meansquare roughness of the surface after annealing (diffusion), which is indicative of the incorporation of In atoms into the GaAs crystal lattice. The clusters are responsible for changes in the Raman spectra. Specifically, an increase in the signal intensity due to surface-enhanced Raman scattering and a shift of the vibration frequency in the surface region are observed. It is found that cluster formation is defined by the crystallographic orientation of the surface and by the technological conditions of surface preparation.

36 MATERIALS SCIENCE↗

Cloud Influence on ERA5 and AMPS Surface Downwelling Longwave Radiation Biases in West Antarctica

The surface downwelling longwave radiation component (LW?) is crucial for the determination of the surface energy budget and has significant implications for the resilience of ice surfaces in the polar regions. Accurate model evaluation of this radiation component requires knowledge about the phase, vertical distribution, and associated temperature of water in the atmosphere, all of which control the LW? signal measured at the surface. In this study, we examine the LW? model errors found in the Antarctic Mesoscale Prediction System (AMPS) operational forecast model and the ERA5 reanalysis model relative to observations from the AWARE campaign at McMurdo Station and the West Antarctic Ice Sheet (WAIS) Divide. The errors are calculated separately for observed clear sky conditions, ice cloud occurrences, and liquid-bearing cloud layer (LBCL) occurrences. The analysis results show a tendency (in both models at each site) to underestimate the LW? during clear sky conditions, high error variability (standard deviations > 20 W/m2) during any type of cloud occurrence, and negative LW? biases when LBCLs are observed (bias magnitudes > 15 W/m2 in tenuous LBCL cases; > 43 W/m2 in optically thick/opaque LBCLs instances). We suggest that a generally dry and liquid water-deficient atmosphere responsible for the identified LW? biases in both models is the result of excessive ice formation and growth, which could stem from model initial and lateral boundary conditions, microphysics scheme, aerosol representation, and/or limited vertical resolution.

Silber, Israel↗

Modeling Helium Segregation to the Surfaces of Plasma-Exposed Tungsten as a Function of Temperature and Surface Orientation

We provide a description of the dependence on surface crystallographic orientation and temperature of the segregation of helium implanted with energies consistent with low-energy plasma exposure to tungsten surfaces. Here, we describe multiscale modeling results based on a hierarchical approach to scale bridging that incorporates atomistic studies based on a reliable interatomic potential to parameterize a spatially dependent drift-diffusion-reaction cluster-dynamics code. An extensive set of molecular dynamics (MD) simulations has been performed at 933 K and/or 1200 K to determine the probabilities of desorption and modified trap mutation that occurs as small, mobile Hen (1 ≤ n ≤ 7) clusters diffuse from the near-surface region toward surfaces of varying crystallographic orientation due to an elastic interaction force that provides the thermodynamic driving force for surface segregation. These near-surface cluster dynamics have significant effects on the surface morphology, the near-surface defect structures, and the amount of helium retained in the material upon plasma exposure, for which we have developed an extensive MD database of cumulative evolution during high-flux helium implantation at 933 K, which we compare to our properly parameterized cluster-dynamics model. This validated model is then used to evaluate the effects of temperature on helium retention and subsurface helium clustering.

Blondel, Sophie↗

Roughness and surface material effects on nucleate boiling heat transfer from cylindrical surfaces to refrigerants R-134a and R-123

This paper presents results of an experimental investigation carried out to determine the effects of the surface roughness of different materials on nucleate boiling heat transfer of refrigerants R-134a and R-123. Experiments have been performed over cylindrical surfaces of copper, brass and stainless steel. Surfaces have been treated by different methods in order to obtain an average roughness, Ra, varying from 0.03 {mu}m to 10.5 {mu}m. Boiling curves at different reduced pressures have been raised as part of the investigation. The obtained results have shown significant effects of the surface material, with brass being the best performing and stainless steel the worst. Polished surfaces seem to present slightly better performance than the sand paper roughened. Boiling on very rough surfaces presents a peculiar behavior characterized by good thermal performance at low heat fluxes, the performance deteriorating at high heat fluxes with respect to smoother surfaces. (author)

42 ENGINEERING↗

Explainable AI (XAI)-driven vibration sensing scheme for surface quality monitoring in a smart surface grinding process

Local Interpretable and Model-agnostic Explanation (LIME), an explainable artificial intelligence (XAI) approach is adapted to identify the globally important time-frequency bands for predicting average surface roughness (Ra) in a smart grinding process. The smart grinding setup consisted of a Supertech CNC precision surface grinding machine, instrumented with a Dytran piezoelectric accelerometer attached to the tailstock quill along the tangential direction (Y-axis). For every grinding pass, vibration signatures were captured, and the ground truth surface roughness values were recorded using a Mahr Marsurf M300C portable surface roughness profilometer. The roughness values ranged from 0.06 to 0.14 microns over the complete set of experiments. Time-frequency domain spectrogram frames were extracted for each of the vibration signals collected during the grinding process. Convolutional Neural Networks (CNNs) were modeled to predict the surface roughness based on these spectrogram frames and their image augmentations. The best CNN model was able to predict the roughness values with an overall R2-score of 0.95, training R2-score of 0.99, and testing R2-score of 0.81 with only 80 sets of vibration signals corresponding to 4 experiments with 20 trials each. Although the data size is not large enough to guarantee such performance metrics in real-world scenarios, one can extract statistically consistent explanations underlying the relationships these complex deep learning models capture. Further, the LIME methodology was implemented on the developed surface roughness CNN model to identify the important time-frequency bands (i.e., the superpixels of a spectrogram) influencing the predictions. Based on the identified important regions on the spectrogram frames, the corresponding frequency characteristics were determined that influence the surface roughness predictions. The important frequency range based on LIME results was approximately 11.7 to 19.1 kHz. The power of XAI was demonstrated by cutting down the sampling rate from 160 kHz to 30, 20, 10, and 5 kHz based on the important frequency range and considering Nyquist criteria. Separate CNN models were developed for these ranges by only extracting time-frequency contents below their corresponding Nyquist cut-offs. A proper data acquisition strategy is proposed by comparing the model performances to argue the selection of a sufficient sampling rate to capture the grinding process successfully and robustly.

42 ENGINEERING↗

Reprint of: Explainable AI (XAI)-driven vibration sensing scheme for surface quality monitoring in a smart surface grinding process

Local Interpretable and Model-agnostic Explanation (LIME), an explainable artificial intelligence (XAI) approach is adapted to identify the globally important time-frequency bands for predicting average surface roughness (Ra) in a smart grinding process. The smart grinding setup consisted of a Supertech CNC precision surface grinding machine, instrumented with a Dytran piezoelectric accelerometer attached to the tailstock quill along the tangential direction (Y-axis). For every grinding pass, vibration signatures were captured, and the ground truth surface roughness values were recorded using a Mahr Marsurf M300C portable surface roughness profilometer. The roughness values ranged from 0.06 to 0.14 microns over the complete set of experiments. Time-frequency domain spectrogram frames were extracted for each of the vibration signals collected during the grinding process. Convolutional Neural Networks (CNNs) were modeled to predict the surface roughness based on these spectrogram frames and their image augmentations. The best CNN model was able to predict the roughness values with an overall R2-score of 0.95, training R2-score of 0.99, and testing R2-score of 0.81 with only 80 sets of vibration signals corresponding to 4 experiments with 20 trials each. Although the data size is not large enough to guarantee such performance metrics in real-world scenarios, one can extract statistically consistent explanations underlying the relationships these complex deep learning models capture. Further, the LIME methodology was implemented on the developed surface roughness CNN model to identify the important time-frequency bands (i.e., the superpixels of a spectrogram) influencing the predictions. Based on the identified important regions on the spectrogram frames, the corresponding frequency characteristics were determined that influence the surface roughness predictions. The important frequency range based on LIME results was approximately 11.7 to 19.1 kHz. The power of XAI was demonstrated by cutting down the sampling rate from 160 kHz to 30, 20, 10, and 5 kHz based on the important frequency range and considering Nyquist criteria. Separate CNN models were developed for these ranges by only extracting time-frequency contents below their corresponding Nyquist cut-offs. A proper data acquisition strategy is proposed by comparing the model performances to argue the selection of a sufficient sampling rate to capture the grinding process successfully and robustly.

47 OTHER INSTRUMENTATION↗

Processing aluminum alloy with hybrid wire arc additive manufacturing and ultrasonic nanocrystalline surface modification to improve porosity, surface finish, and hardness

Here, in this paper, a novel hybrid wire arc additive manufacturing (WAAM) and ultrasonic nanocrystal surface modification (UNSM) on porosity manipulation and surface properties of aluminum 5356 alloys was studied. The goal is to improve the quality of the WAAM-built part by eliminating bigger pores and reducing its size, reducing surface roughness, and increasing surface hardness. The as-built WAAM and WAAM-UNSM-treated samples were quantitatively studied for porosity using an X-ray micro-computed tomography (μ-CT). The surface roughness was measured on the surface profile of the same samples before and after UNSM treatment. Followed by the Vickers micro-hardness tests to evaluate the hardness modified by the influence of the UNSM treatment. It was found that the bigger pores in the as-built WAAM samples were eliminated and the medium-sized pores were shrunk to almost half the size after the UNSM treatment. Further, the UNSM treatment showed a significant improvement in both surface roughness and hardness on the WAAM Al5356 samples. This experimental work demonstrates the critical advantages of hybrid WAAM-UNSM in improving the qualities of the WAAM processed parts.

Hardness↗

Interaction of soft x-ray laser pulse radiation with aluminum surface: Nano-meter size surface modification

Interaction of soft x-ray laser radiation with material and caused modification of the exposed surface has both physical and practical interests. We irradiated the focusing soft x-ray laser (SXRL) pulses having a wavelength of 13.9 nm and the duration of 7 ps to aluminum (Al) surface. After the SXRL irradiation process, the irradiated Al surface was observed with a scanning electron microscope. The surface modifications caused by SXRL single pulse exposure were clearly seen. In addition, it was found that the conical structures having around 100 nm in diameters were formed in the shallow features. The nano-meter size modified structures at Al surface induced by SXRL pulse is interesting as the newly surface structure. Hence, the SXRL beam would be a candidate for a tool of micromachining. We also provide a thermomechanical modeling of SXRL interaction with Al briefly to explain the surface modification.

36 MATERIALS SCIENCE↗