Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural collapse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Three-dimensional compressible convection at low Prandtl numbers

Numerical simulations are used to study fully compressible thermal convection at large Rayleigh numbers. Results are presented from a sequence of three-dimensional simulations that reveal a transition from gradually-evolving laminar convection to nearly turbulent convection as the Prandtl number is reduced from a value of unity to one-tenth. The convective flows form irregular cellular patterns near the upper surface, possesing a network of fast downflow at cell peripheries and gentler upflow at cell centers. At greater depths the curving sheets of downflow collapse into plumes which may twist and possess substantial vertical vorticity. For the lowest Prandtl number, the convection near the bottom of the layer appears to be turbulent, yet the rapidly varying small-scale flow structure there is accompanied by more ordered sites of wavering upflow, with the latter able to penetrate all the way to the upper boundary. Thus a significant component of the flow is able to extend over multiple density scale heights, in contrast to what is argued in formulating mixing-length models for stellar convection. Results are also shown from two-dimensional simulations carried out with very high spatial resolution, which reveal that supersonic convection with fluttering shock systems can be realized.

Toomre, Juri↗

Intrepid: A Mission to Pluto

A proposal for an exploratory spacecraft mission to Pluto/Charon system was written in response to the request for proposal for an unmannned probe to pluto (RFP). The design requirements of the RFP are presented and under the guidance of these requirements, the spacecraft Intrepid was designed. The RPF requirement that was of primary importance is the minimization of cost. Also, the reduction of flight time was of extreme importance because the atmosphere of Pluto is expected to collapse close to the Year 2020. If intrepid should arrive after the collapse, the mission would be a failure; for Pluto would be only a solid rock of ice. The topics presented include: (1) scientific instrumentation; (2) mission management, planning, and costing; (3) power and propulsion subsystem; (4) structural subsystem; (5) command, control, and communications; and (6) attitude and articulation control.

Behling, Michael↗

Stiffened Carbon/Carbon Compression Panels

Panels with integral stiffeners made with woven fabric in two-dimensional, cross-ply layups. Local skin buckling does not cause collapse of panels, and ultimate failure occurs at loads 10 to 20 percent above buckling loads. For panels subjected to in-plane loading, separation of stiffeners from panel skins was not problem. High-temperature structural applications on advanced aircraft and spacecraft include leading edges, fairings, and control surfaces.

Sawyer, James W.↗

Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration

We have fabricated porous, biodegradable tubular conduits for guided tissue regeneration using a combined solvent casting and extrusion technique. The biodegradable polymers used in this study were poly(DL-lactic-co-glycolic acid) (PLGA) and poly(L-lactic acid) (PLLA). A polymer/salt composite was first prepared by a solvent casting process. After drying, the composite was extruded to form a tubular construct. The salt particles in the construct were then leached out leaving a conduit with an open-pore structure. PLGA was studied as a model polymer to analyze the effects of salt weight fraction, salt particle size, and processing temperature on porosity and pore size of the extruded conduits. The porosity and pore size were found to increase with increasing salt weight fraction. Increasing the salt particle size increased the pore diameter but did not affect the porosity. High extrusion temperatures decreased the pore diameter without altering the porosity. Greater decrease in molecular weight was observed for conduits manufactured at higher temperatures. The mechanical properties of both PLGA and PLLA conduits were tested after degradation in vitro for up to 8 weeks. The modulus and failure strength of PLLA conduits were approximately 10 times higher than those of PLGA conduits. Failure strain was similar for both conduits. After degradation for 8 weeks, the molecular weights of the PLGA and PLLA conduits decreased to 38% and 43% of the initial values, respectively. However, both conduits maintained their shape and did not collapse. The PLGA also remained amorphous throughout the time course, while the crystallinity of PLLA increased from 5.2% to 11.5%. The potential of seeding the conduits with cells for transplantation or with biodegradable polymer microparticles for drug delivery was also tested with dyed microspheres. These porous tubular structures hold great promise for the regeneration of tissues which require tubular scaffolds such as peripheral nerve, long bone, intestine, or blood vessel.

NASA Discipline Cell Biology↗

Food Quality and Phytoplankton Community Composition in San Francisco Bay using Imaging Spectroscopy Data from the California HyspIRI Airborne Campaign

The San Francisco Bay (SFB) is the largest estuary on the west coast of the United States. It is an important transition zone between marine, freshwater, and inland terrestrial watersheds. The SFB is an important region for the cycling of nutrients and pollutants and it supports nurseries of ecologically and commercially important fisheries, including some threatened species. Phytoplankton community structure influences food web dynamics, and the taxonomy of the phytoplankton may be more important in determining primary food quality than environmental factors. As such, estimating food quality from phytoplankton community composition can be a robust tool to understand trophic transfer of energy. Recent work explores phytoplankton food quality in SFB through the use of microscopy and phytoplankton chemotaxonomy to evaluate how changes in phytoplankton composition may have influenced the recent trophic collapse of pelagic fishes in the northern part of the SFB. The objective of this study is to determine if the approach can also be applied to imaging spectroscopy data in order to quantify phytoplankton food quality from space. Imaging spectroscopy data of SFB from the Airborne VisibleInfrared Imaging Spectrometer (AVIRIS) was collected during the Hyperspectral Infrared (HyspIRI) Airborne Campaign in California (2013 2015) and used in this study. Estimates of ocean chlorophyll and phytoplankton community structure were determined using standard ocean chlorophyll algorithms and the PHYtoplankton Detection with Optics (PHYDOTax) algorithms. These were validated using in situ observations of phytoplankton composition using microscopic cell counts and phytoplankton chemotaxonomy from the US Geological Surveys ship surveys of the SFB. The findings from this study may inform the use of future high spectral resolution satellite sensors with the spatial resolution appropriate for coastal systems (e.g., HyspIRI) to assess food quality from space.

HyspIRI↗

Lunar crater chains of non-impact origin

Apollo 15, 16, and 17 photographs were scanned for lunar crater chains consisting of three or more aligned craters with similar states of degradation, and the origin of these chains is considered. The mode of origin for mare crater chains appears to be associated with either collapsed lava tubes or cinder cones, while the origin of highland crater chains generally seems to involve highland volcanoes. Crater chains from mare regions range from 20 to 40 km long and appear to have no preferred structural control of their orientation. Highland crater chains range from 1 to 113 km long and may be structurally controlled by the lunar grid system.

Eppler, D.↗

The Next Generation Airborne Observatory: SOFIA

NASA, DARA, and the astronomical community have planned SOFIA (Stratospheric Observatory for Infrared Astronomy) to extend and expand the capabilities of airborne astronomy. Just as the Kuiper Airborne Observatory telescope has three times the aperture of its Learjet predecessor, SOFIA's aperture (2.5 m) will be three times that of the KAO. Thus SOFIA will surpass the angular resolution of the KAO by a factor of three and its per-pixel sensitivity by a factor approximately 10 at wavelengths beyond 10 micrometers. Following the tradition of the KAO and Learjet programs, the user community will provide most of the SOFIA focal plane instruments. Scientists will fly their new instruments as soon as they become operational, assuring immediate application of state-of-the-art technology throughout the anticipated 20 year observatory lifetime. Annual peer review of submitted proposals guarantees a vigorous observing program. Armed by 15-20 different instrument teams, reinforced by an additional approximately 50 guest investigator groups, and flying 160 8-hour sorties per year, SOFIA will be used to attack a very broad range of astronomical problems. To name just a few, observations made from SOFIA will: greatly extend our understanding of the star-formation process, including collapse, accretion, and outflow phenomena; penetrate the obscuring dust of the Milky way to reveal gas motions, the luminosity distribution, and possibly the powerful excitation mechanism at the center of our Galaxy; and probe km-scale structure of planetary atmospheres and ring systems. The Astronomy and Astrophysics Survey (Bahcall) committee ranked SOFIA as the highest priority moderate cost new mission for NASA in the 1990s. SOFIA has been thoroughly studied and is ready to start development. If funding is available in 1996 as currently planned by NASA and DARA Astrophysics Offices, SOFIA could be flying by the end of the decade.

Erickson, E. F.↗

Recession Curve Generation for the Space Shuttle Solid Rocket Booster Thermal Protection System Coatings

Ablatable Thermal Protection System (TPS) coatings are used on the Space Shuttle Vehicle Solid Rocket Boosters in order to protect the aluminum structure from experiencing excessive temperatures. The methodology used to characterize the recession of such materials is outlined. Details of the tests, including the facility, test articles and test article processing are also presented. The recession rates are collapsed into an empirical power-law relation. A design curve is defined using a 95-percentile student-t distribution. based on the nominal results. Actual test results are presented for the current acreage TPS material used.

Kanner, Howard S.↗

What can we learn about cosmic structure from gravitational waves?

Observations of low frequency gravitational waves by the space-based LISA mission will open a new observational window on the early universe and the emergence of structure. LISA will observe the dynamical coalescence of massive black hole binaries at high redshifts, giving an unprecedented look at the merger history of galaxies and the reionization epoch. LISA will also observe gravitational waves from the collapse of supermassive stars to form black holes, and will map the spacetime in the central regions of galaxy cusps at high precision.

Centrella, Joan M.↗

SRB attrition rate study of the aft skirt due to water impact cavity collapse loading

A methodology was presented so that realistic attrition prediction could aid in selecting an optimum design option for minimizing the effects of updated loads on the Space Shuttle Solid Rocket Booster (SRB) aft skirt. The updated loads resulted in water impact attrition rates greater than 10 percent for the aft skirt structure. Adding weight to reinforce the aft skirt was undesirable. The refined method treats the occurrences of the load distribution probabilistically, radially and longitudinally, with respect to the critical structural response.

Crockett, C. D.↗

Structure, Motion, and Evolution of Star-Forming Dense Cores

Under this grant in the past year we have pursued spectral-line observations of star-forming regions over size scales from 0.01 pc to 0.5 pc. Our main goal has been to measure the systematic and turbulent motions of condensing and collapsing gas. The following summary is excerpted from our recent application for a new three-year grant, submitted in June, 2002.

Myers, Philip C.↗

Exact hierarchical clustering in one dimension

The present adhesion model-based one-dimensional simulations of gravitational clustering have yielded bound-object catalogs applicable in tests of analytical approaches to cosmological structure formation. Attention is given to Press-Schechter (1974) type functions, as well as to their density peak-theory modifications and the two-point correlation function estimated from peak theory. The extent to which individual collapsed-object locations can be predicted by linear theory is significant only for objects of near-characteristic nonlinear mass.

Williams, B. G.↗

The formation of protostellar disks. I - 1 M(solar)

Hydrodynamical calculations of the collapse of an axisymmetric, rotating one solar mass protostellar cloud, including the effects of radiative transfer and radiative acceleration but without magnetic fields, are presented. The results include calculations of infrared protostellar spectra as a function of time and viewing angle. A numerical algorithm involving explicit nested grids is used to resolve the region of initial disk formation and at the same time to include the outer regions in the calculation. The central part of the protostar is modeled approximately. Initial conditions are systematically varied to investigate their influence on the evolution and final configuration of central star plus circumstellar disk. The initial state for the standard case is a centrally condensed molecular cloud core of one solar mass with a mean density of 8 x 10 exp -18 g/cu cm and a specific angular momentum at the outer edge of 7 x 10 exp 20 sq cm/s. The collapse is followed for 8 x 10 exp 4 yr, at which point 0.45 solar mass is contained in a rapidly rotating central object and most of the remainder in a surrounding equilibrium disk. The stability of this final structure is qualitatively analyzed.

Yorke, Harold W.↗

The Effect of Strain Rate on the Evolution of Plane Wakes Subjected to Irrotational Strains

Direct numerical simulations of time-evolving turbulent plane wakes developing in the presence of irrotational plane strain applied at three different strain rates have been generated. The strain geometry is such that the flow is compressed in the streamwise direction and expanded in the cross-stream direction with the spanwise direction being unstrained. This geometry is the temporally evolving analogue of a spatially evolving wake in an adverse pressure gradient. A pseudospectral numerical method with up to 16 million modes is used to solve the equations in a reference frame moving with the irrotational strain. The initial condition for each simulation is taken from a previous turbulent self-similar plane wake direct numerical simulation at a velocity deficit Reynolds number, Re, of about 2,000. Although the evolutions of many statistics are nearly collapsed when plotted against total strain, there are some differences owing to the different strain rate histories. The impact of strain-rate on the wake spreading rate, the peak velocity deficit, the Reynolds stress profiles, and the flow structure is examined.

Rogers, Michael M.↗

Effects of Initial Geometric Imperfections On the Non-Linear Response of the Space Shuttle Superlightweight Liquid-Oxygen Tank

The results of an analytical study of the elastic buckling and nonlinear behavior of the liquid-oxygen tank for the new Space Shuttle superlightweight external fuel tank are presented. Selected results that illustrate three distinctly different types of non-linear response phenomena for thin-walled shells which are subjected to combined mechanical and thermal loads are presented. These response phenomena consist of a bifurcation-type buckling response, a short-wavelength non-linear bending response and a non-linear collapse or "snap-through" response associated with a limit point. The effects of initial geometric imperfections on the response characteristics are emphasized. The results illustrate that the buckling and non-linear response of a geometrically imperfect shell structure subjected to complex loading conditions may not be adequately characterized by an elastic linear bifurcation buckling analysis, and that the traditional industry practice of applying a buckling-load knock-down factor can result in an ultraconservative design. Results are also presented that show that a fluid-filled shell can be highly sensitive to initial geometric imperfections, and that the use a buckling-load knock-down factor is needed for this case.

Nemeth, Michael P.↗

The Galex Time Domain Survey. I. Selection And Classification of Over a Thousand Ultraviolet Variable Sources

We present the selection and classification of over a thousand ultraviolet (UV) variable sources discovered in approximately 40 deg(exp 2) of GALEX Time Domain Survey (TDS) NUV images observed with a cadence of 2 days and a baseline of observations of approximately 3 years. The GALEX TDS fields were designed to be in spatial and temporal coordination with the Pan-STARRS1 Medium Deep Survey, which provides deep optical imaging and simultaneous optical transient detections via image differencing. We characterize the GALEX photometric errors empirically as a function of mean magnitude, and select sources that vary at the 5 sigma level in at least one epoch. We measure the statistical properties of the UV variability, including the structure function on timescales of days and years. We report classifications for the GALEX TDS sample using a combination of optical host colors and morphology, UV light curve characteristics, and matches to archival X-ray, and spectroscopy catalogs. We classify 62% of the sources as active galaxies (358 quasars and 305 active galactic nuclei), and 10% as variable stars (including 37 RR Lyrae, 53 M dwarf flare stars, and 2 cataclysmic variables). We detect a large-amplitude tail in the UV variability distribution for M-dwarf flare stars and RR Lyrae, reaching up to absolute value(Δm) = 4.6 mag and 2.9 mag, respectively. The mean amplitude of the structure function for quasars on year timescales is five times larger than observed at optical wavelengths. The remaining unclassified sources include UV-bright extragalactic transients, two of which have been spectroscopically confirmed to be a young core-collapse supernova and a flare from the tidal disruption of a star by dormant supermassive black hole. We calculate a surface density for variable sources in the UV with NUV less than 23 mag and absolute value(Δm) greater than 0.2 mag of approximately 8.0, 7.7, and 1.8 deg(exp −2) for quasars, active galactic nuclei, and RR Lyrae stars, respectively. We also calculate a surface density rate in the UV for transient sources, using the effective survey time at the cadence appropriate to each class, of approximately 15 and 52 deg(exp −2 yr−1 for M dwarfs and extragalactic transients, respectively.

Gezari, S.↗

Deep Basalt Aquifers in Orcus Patera, Elysium Basin Mars: Perspectives for Exobiology Exploration

Direct indicators of shorelines, spillways, and terraces allowed to determine the extent of the Elysium Paleolake between the contour-lines 1000 and 500 m below the Martian datum. The Elysium Paleolake is bordered north by Orcus Patera (14N/181W), which lies west of the Tartarus Montes and Tartarus Colles. The Orcus Patera displays an ellipse-shaped collapsed caldera of 360-km long and 100-km wide. Viking topographic data show that the bottom of the caldera is located at 2500 below the Martian datum, and surrounded by a steep-walled ram art which crest is located at about 0 m elevation. Considering the localization of Orcus Patera in the Elysium paleolake, its altimetry, and the magmatic origin of this caldera, we propose the existence of a paleolake in Orcus Patera generated (a) by juvenile water from magma during the Noachian period, and (b) by intermittent influx of the Elysium Basin from Hesperian to Amazonian. Results are encouraging to consider this site as a potential high-energy source environment for microbial communities. are circumscribed by a 50-km wide lava field mapped as Noachian material. The structure of Orcus Patera represents the record of material erupted from a magmatic reservoir. The caldera is enclosed by steep inner walls (25% measured from topographic data), values which could be in agreement with the presence of a deep magmatic reservoir, as suggested by the typology of Crumpler et.al. The depth of the caldera might be due to the collapse of the magma reservoir, and the release of gases accompanying the magma thermal evolution. Origins of water for the paleolake(s): The water that generated a paleolake in Orcus Patera may have come from two origins: (1) Juvenile water: Plescia and Crips estimated a magma H20 content by weight between 0.5% and 1.5% using for the first value a comparison with terrestrial basalt, and for the second values from a Martian meteorite. The amount of H20 can be estimated by the volume of erupted lava, and the lava content of the caldera. In this study, we adopt a water content of 1%. The total volume of magma that has been contained in the caldera, and the volume of lava contained in the observed lava field is about 110 x 10(exp 6) cubic km, that gives a total volume of 1.10 x 10(exp 6) cubic km of water. The juvenile water expelled by the overpressure within the magma chamber charged with desolved water-vapor may have moved into the crust. The decrease in overburden pressure led to bubble formation. The ascent of these bubbles generated a pressurization of the magma, which was sufficient to fracture the overlaying magma layer, (2) Water from Elysium paleolake. During the Amazonian, the rise of the Elysium paleolake level generated an overspilling that supplied the caldera with water. The southern portion of the crest shows a deep gap 12-km wide at -1500 m elevation, locating the gap between 500 to 1000 in below the assumed water of Elysium paleolake, thus facilitating the influx of Elysium paleolake water into Orcus Patera. Bathymetric calculations give a floor area of 25,500 sq km at -2000 m elevation, and a water volume of 42,000 cubic km, with a lake-level at -1500 m. A substantial amount of water may have percolated through the fractured lava, and part of the volume may have overspilled the northern crest of Orcus Patera to debouch in the Tartarus Montes region. We envision the formation of a subsurface aqueous environment in basaltic rocks at the contact of the two water-source origins, possibly the percolating surface lake water, and more likely the juvenile water. Similarly to terrestrial calderas, Orcus Patera might be surrounded by ring-fractures caused by the collapse of the magma chamber that followed the release of gases. These ring-fractures may have been covered later by sedimentation in the caldera (lacustrine, aeolian, and volcanic), and by mass wasting. The detumescence of the magma in the caldera, and the vesiculation of the juvenile water may have operated simultaneously. Comparatively to terrestrial melts, Martian iron-rich melts are denser. This greater density implies greater effusion rates (eight-times terrestrial values), and larger fissuration widths (two-times terrestrial ones). With increasing vesiculation of magma, the bubbles interact with one-another because there are of similar pressure. They make a magma froth at the contact with the caldera surface, and on the walls of the fractures. In the saturated magma, froth, where the volume ratio of gases-to-liquid is about 4:1, the bubbles form a huge surface area of interconnected spaces. Bubbles near the caldera surface disrupt the magma, and fragmentation takes place, which moves downward through the magma column. On Earth, the bubbles are likely to grow between 1 and 50 mm in diameter due to the difference between the magma surface tension, and the bubble supersaturation pressure. The Martian low-pressure at surface level is likely to accelerate the expansion of the bubbles, and increase their final diameter and number, creating more voids in the magma. The strong magma froth with enclosed juvenile water bubbles interconnected with exsolved gas bubbles constitute a potential geothermal environment for geochemical energy production from basalt and water that does not require excessive temperatures. This process can start at +20C. Similar types of environments have been shown on Earth as potential energy sources for microbial metabolism, and could have provided deep aqueous basaltic niches for possible Martian microorganisms, even geologically recently. During the Amazonian, combination of volcanism and water activity still existed on Mars. Moreover, this type of potential niches open ways for investigation of possible oases of extinct or extant life, not only on paleolakes, and surface hydrothermalism spring areas, but also all large systems of fossae, which combine hydrologic and volcanic activities, and which provide an energy source, and an underground shelter to prevent surface UV bombardment. Additional information contained in the original.

Grin, E. A.↗

The origin of lunar mascons - Analysis of the Bouguer gravity associated with Grimaldi

Grimaldi is a relatively small multi-ringed basin located on the western limb of the moon. Spacecraft free-air gravity data reveal a mascon associated with the inner ring of this structure, and the topographic correction to the local lunar gravity field indicates a maximum Bouguer anomaly of +90 milligals at an altitude of 70 kilometers. Approximately 20% of this positive Bouguer anomaly can be attributed to the mare material lying within the inner ring of this basin. From a consideration of the Bouguer gravity and structure of large lunar craters comparable in size to the central basin of Grimaldi, it is suggested that the remaining positive Bouguer anomaly is due to a centrally uplifted plug of lunar mantle material. The uplift was caused by inward crustal collapse which also resulted in the formation of the concentric outer scarp of Grimaldi. In addition, an annulus of low density material, probably a combination of ejecta and in situ breccia, is required to fully reproduce the Bouguer gravity signature across this basin. It is proposed that Grimaldi supplies a critical test in the theory of mascon formation: crustal collapse by ring faulting and central uplift to depths of the crust-mantle boundary are requisites

Phillips, R. J.↗