SEARCH · Engineering Papers

Results for “spatial heterogeneity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS2012

High Precision, Absolute Total Column Ozone Measurements from the Pandora Spectrometer System: Comparisons with Data from a Brewer Double Monochromator and Aura OMI

We present new, high precision, high temporal resolution measurements of total column ozone (TCO) amounts derived from ground-based direct-sun irradiance measurements using our recently deployed Pandora single-grating spectrometers. Pandora's small size and portability allow deployment at multiple sites within an urban air-shed and development of a ground-based monitoring network for studying small-scale atmospheric dynamics, spatial heterogeneities in trace gas distribution, local pollution conditions, photochemical processes and interdependencies of ozone and its major precursors. Results are shown for four mid- to high-latitude sites where different Pandora instruments were used. Comparisons with a well calibrated double-grating Brewer spectrometer over a period of more than a year in Greenbelt MD showed excellent agreement and a small bias of approximately 2 DU (or, 0.6%). This was constant with slant column ozone amount over the full range of observed solar zenith angles (15-80), indicating adequate Pandora stray light correction. A small (1-2%) seasonal difference was found, consistent with sensitivity studies showing that the Pandora spectral fitting TCO retrieval has a temperature dependence of 1% per 3K, with an underestimation in temperature (e.g., during summer) resulting in an underestimation of TCO. Pandora agreed well with Aura-OMI (Ozone Measuring Instrument) satellite data, with average residuals of <1% at the different sites when the OMI view was within 50 km from the Pandora location and OMI-measured cloud fraction was <0.2. The frequent and continuous measurements by Pandora revealed significant short-term (hourly) temporal changes in TCO, not possible to capture by sun-synchronous satellites, such as OMI, alone.

Ozone↗

NASA NTRS2014

Global Warming and 21st Century Drying

Global warming is expected to increase the frequency and intensity of droughts in the twenty-first century, but the relative contributions from changes in moisture supply (precipitation) versus evaporative demand (potential evapotranspiration; PET) have not been comprehensively assessed. Using output from a suite of general circulation model (GCM) simulations from phase 5 of the Coupled Model Intercomparison Project, projected twentyfirst century drying and wetting trends are investigated using two offline indices of surface moisture balance: the Palmer Drought Severity Index (PDSI) and the Standardized Precipitation Evapotranspiration Index (SPEI). PDSI and SPEI projections using precipitation and Penman- Monteith based PET changes from the GCMs generally agree, showing robust cross-model drying in western North America, Central America, the Mediterranean, southern Africa, and the Amazon and robust wetting occurring in the Northern Hemisphere high latitudes and east Africa (PDSI only). The SPEI is more sensitive to PET changes than the PDSI, especially in arid regions such as the Sahara and Middle East. Regional drying and wetting patterns largely mirror the spatially heterogeneous response of precipitation in the models, although drying in the PDSI and SPEI calculations extends beyond the regions of reduced precipitation. This expansion of drying areas is attributed to globally widespread increases in PET, caused by increases in surface net radiation and the vapor pressure deficit. Increased PET not only intensifies drying in areas where precipitation is already reduced, it also drives areas into drought that would otherwise experience little drying or even wetting from precipitation trends alone. This PET amplification effect is largest in the Northern Hemisphere mid-latitudes, and is especially pronounced in western North America, Europe, and southeast China. Compared to PDSI projections using precipitation changes only, the projections incorporating both precipitation and PET changes increase the percentage of global land area projected to experience at least moderate drying (PDSI standard deviation of < or = -1) by the end of the twenty-first century from 12 to 30 %. PET induced moderate drying is even more severe in the SPEI projections (SPEI standard deviation of > or = -1; 11 to 44 %), although this is likely less meaningful because much of the PET induced drying in the SPEI occurs in the aforementioned arid regions. Integrated accounting of both the supply and demand sides of the surface moisture balance is therefore critical for characterizing the full range of projected drought risks tied to increasing greenhouse gases and associated warming of the climate system.

moisture↗

NASA NTRS2014

Adjoint Methods for Adjusting Three-Dimensional Atmosphere and Surface Properties to Fit Multi-Angle/Multi-Pixel Polarimetric Measurements

This paper derives an efficient procedure for using the three-dimensional (3D) vector radiative transfer equation (VRTE) to adjust atmosphere and surface properties and improve their fit with multi-angle/multi-pixel radiometric and polarimetric measurements of scattered sunlight. The proposed adjoint method uses the 3D VRTE to compute the measurement misfit function and the adjoint 3D VRTE to compute its gradient with respect to all unknown parameters. In the remote sensing problems of interest, the scalar-valued misfit function quantifies agreement with data as a function of atmosphere and surface properties, and its gradient guides the search through this parameter space. Remote sensing of the atmosphere and surface in a three-dimensional region may require thousands of unknown parameters and millions of data points. Many approaches would require calls to the 3D VRTE solver in proportion to the number of unknown parameters or measurements. To avoid this issue of scale, we focus on computing the gradient of the misfit function as an alternative to the Jacobian of the measurement operator. The resulting adjoint method provides a way to adjust 3D atmosphere and surface properties with only two calls to the 3D VRTE solver for each spectral channel, regardless of the number of retrieval parameters, measurement view angles or pixels. This gives a procedure for adjusting atmosphere and surface parameters that will scale to the large problems of 3D remote sensing. For certain types of multi-angle/multi-pixel polarimetric measurements, this encourages the development of a new class of three-dimensional retrieval algorithms with more flexible parametrizations of spatial heterogeneity, less reliance on data screening procedures, and improved coverage in terms of the resolved physical processes in the Earth's atmosphere.

linearization↗

NASA NTRS2014

Adjoint Methods for Adjusting Three-Dimensional Atmosphere and Surface Properties to Fit Multi-Angle Multi-Pixel Polarimetric Measurements

adjoint methods↗

NASA NTRS2014

Validation of Land Surface Temperature Products Derived from the Visible Infrared Imaging Radiometer Suite (VIIRS) Using Ground-based and Heritage Satellite Measurements

Thermal infrared satellite observations of the Earth's surface are widely used to retrieve Land Surface Temperature (LST) and monitor LST changes around the world. Since January 2012, the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-Orbiting Partnership (S-NPP) has provided daily observations of LST with a spatial resolution of 750 m at nadir. Comparison of the standard VIIRS LST product with the equivalent daily standard product from the Moderate Resolution Imaging Spectroradiometer (MODIS) collection-5 and with ground-based measurements over vegetated and inland water surfaces showed good agreement. Analysis indicated the accuracy and precision of the VIIRS product over these cover types was 0.2 K and 2.0 K respectively provided the analyses included appropriate compensation for any spatial heterogeneity in LST within the validation site. However, comparisons between in situ LST and the VIIRS and MODIS LST.

Land surface temperature↗

NASA NTRS2015

Deriving Scaling Factors Using a Global Hydrological Model to Restore GRACE Total Water Storage Changes for China's Yangtze River Basin

This study used a global hydrological model (GHM), PCR-GLOBWB, which simulates surface water storage changes, natural and human induced groundwater storage changes, and the interactions between surface water and subsurface water, to generate scaling factors by mimicking low-pass filtering of GRACE signals. Signal losses in GRACE data were subsequently restored by the scaling factors from PCR-GLOBWB. Results indicate greater spatial heterogeneity in scaling factor from PCR-GLOBWB and CLM4.0 than that from GLDAS-1 Noah due to comprehensive simulation of surface and subsurface water storage changes for PCR-GLOBWB and CLM4.0. Filtered GRACE total water storage (TWS) changes applied with PCR-GLOBWB scaling factors show closer agreement with water budget estimates of TWS changes than those with scaling factors from other land surface models (LSMs) in China's Yangtze River basin. Results of this study develop a further understanding of the behavior of scaling factors from different LSMs or GHMs over hydrologically complex basins, and could be valuable in providing more accurate TWS changes for hydrological applications (e.g., monitoring drought and groundwater storage depletion) over regions where human-induced interactions between surface water and subsurface water are intensive.

water↗

NASA NTRS2016

Early Spring Post-Fire Snow Albedo Dynamics in High Latitude Boreal Forests Using Landsat-8 OLI Data

Taking advantage of the improved radiometric resolution of Landsat-8 OLI which, unlike previous Landsat sensors, does not saturate over snow, the progress of fire recovery progress at the landscape scale (less than 100 m) is examined. High quality Landsat-8 albedo retrievals can now capture the true reflective and layered character of snow cover over a full range of land surface conditions and vegetation densities. This new capability particularly improves the assessment of post-fire vegetation dynamics across low- to high-burn severity gradients in Arctic and boreal regions in the early spring, when the albedos during recovery show the greatest variation. We use 30 m resolution Landsat-8 surface reflectances with concurrent coarser resolution (500 m) MODIS high quality full inversion surface Bidirectional Reflectance Distribution Functions (BRDF) products to produce higher resolution values of surface albedo. The high resolution full expression shortwave blue sky albedo product performs well with an overall RMSE of 0.0267 between tower and satellite measures under both snow-free and snow-covered conditions. While the importance of post-fire albedo recovery can be discerned from the MODIS albedo product at regional and global scales, our study addresses the particular importance of early spring post-fire albedo recovery at the landscape scale by considering the significant spatial heterogeneity of burn severity, and the impact of snow on the early spring albedo of various vegetation recovery types. We found that variations in early spring albedo within a single MODIS gridded pixel can be larger than 0.6. Since the frequency and severity of wildfires in Arctic and boreal systems is expected to increase in the coming decades, the dynamics of albedo in response to these rapid surface changes will increasingly impact the energy balance and contribute to other climate processes and physical feedback mechanisms. Surface radiation products derived from Landsat-8 data will thus play an important role in characterizing the carbon cycle and ecosystem processes of high latitude systems.

Landsat-8 snow albedo↗

NASA NTRS2016

Airborne Measurements of Ozone and Other Trace Gases Captured by the Alpha Jet Atmospheric eXperiment (AJAX) During the 2016 California Baseline Ozone Transport Study (CABOTS)

In October 2015, the Environmental Protection Agency lowered the National Ambient Air Quality Standard for ozone (O3) from 75 ppbv to 70 ppbv. However, meeting the stricter air standards is a challenge for certain areas of California, like the San Joaquin Valley (SJV), where O3 levels are typically high due to topography, meteorology, and local emissions. Another factor potentially contributing to increased surface O3 is the trans-Pacific transport of O3 from Asia. The extent of which O3stems from local emissions or is transported across the Pacific, however, is unclear. The California Ozone Transport Study (CABOTS), a joint effort between the California Air Resource Board, the National Oceanic and Atmospheric Administration, and San Jose State University, was conducted during the spring and summer of 2016 in an attempt to answer this question.Nearly 10 science flights were carried out by the Alpha Jet Atmospheric eXperiment (AJAX) between June and August 2016, based out of the NASA Ames Research Center. A summary of airborne O3, CO2, CH4, H2O, formaldehyde (HCHO), and 3D wind measurements will be presented. AJAX flights connect the fixed-location measurements at Visalia (TOPAZ ozone lidar) and Bodega Bay (ozonesondes), while exploring the spatial heterogeneity of O3 concentrations across California and at various offshore locations. Preliminary analyses of these flights will investigate connections between offshore O3 and Central Valley O3. Vertical profiles, time series, and tracer-tracer correlations will be employed to identify the sources of O3 during these flights.

Iraci, Laura T.↗

NASA NTRS2018

Microwave Remote Sensing of Snow: Advances over Ice Sheet, Land, and Sea Ice

Satellite microwave radiometers have enabled us to observe the cryosphere and its changes. A variety of algorithms have been developed since the late 1970s. These convert observed microwave radiation into geophysical, glaciological properties relevant to study ice sheets’ snow accumulation and melt, terrestrial snow water equivalent and freeze/thaw state, and various sea ice cover characteristics like extent, concentration, and thickness. In spite of the continuous availability of satellite microwave radiometers for the past 40 years, potential for advancing our understanding of the relationship between microwave radiation and snow/ice properties still exists. Original empirical algorithms have matured and are becoming more physically based. This presentation offers insights into some advances made during the past 10 years in monitoring ice sheet, terrestrial snow, and sea ice. These advances made it possible to provide new, more reliable climate-related variables to the community for the satellite era using the typical 18-37 GHz frequency range (e.g., retrievals of grain size profiles in Antarctica, snow cover stratification, and therefore accumulation with applications to climate studies). Recent NASA instruments have recorded low microwave frequencies (at 1.4 GHz). These observations have a large penetration depth, they emanate from deep into the ice, where properties including temperature are very stable. Nonetheless, it has been found at both Dome C, Antarctica and Summit, Greenland that changes in surface snow properties significantly influence these observations. Compared to ice sheets, terrestrial snow and sea ice present higher spatial heterogeneities. Over land, presence of canopy and lakes, though with known locations, add ambiguities in the retrievals of snow properties. Over sea ice, ridges, leads, changes in salinity, and sea ice drift augment further the level of difficulty in obtaining robust geophysical properties. Assessing the quality of satellite retrievals, often requiring field activities, is a necessary step in designing the next generation of microwave algorithms to monitor changes in the cryosphere.

Brucker, Ludovic↗

NASA NTRS2020

Windows of Opportunity for Skillful Forecasts Subseasonal to Seasonal and Beyond

There is high demand and a growing expectation for predictions of environmental conditions that go beyond 0–14-day weather forecasts with outlooks extending to one or more seasons and beyond. This is driven by the needs of the energy, water management, and agriculture sectors, to name a few. There is an increasing realization that, unlike weather forecasts, prediction skill on longer time scales can leverage specific climate phenomena or conditions for a predictable signal above the weather noise. Currently, it is understood that these conditions are intermittent in time and have spatially heterogeneous impacts on skill, hence providing strategic windows of opportunity for skillful forecasts. Research points to such windows of opportunity, including El Niño or La Niña events, active periods of the Madden–Julian oscillation, disruptions of the stratospheric polar vortex, when certain large-scale atmospheric regimes are in place, or when persistent anomalies occur in the ocean or land surface. Gains could be obtained by increasingly developing prediction tools and metrics that strategically target these specific windows of opportunity. Across the globe, reevaluating forecasts in this manner could find value in forecasts previously discarded as not skillful. Users’ expectations for prediction skill could be more adequately met, as they are better aware of when and where to expect skill and if the prediction is actionable. Given that there is still untapped potential, in terms of process understanding and prediction methodologies, it is safe to expect that in the future forecast opportunities will expand. Process research and the development of innovative methodologies will aid such progress.

Annarita Mariotti↗

NASA NTRS2021

Tracking the Rates and Mechanisms of Canopy Damage and Recovery Following Hurricane Maria Using Multitemporal Lidar Data

Hurricane Maria, a Category 4 storm, snapped and uprooted canopy trees, removed large branches, and defoliated vegetation across Puerto Rico. The magnitude of forest damages and the rates and mechanisms of forest recovery following Maria provide important benchmarks for understanding the ecology of extreme events. We used airborne Lidar data acquired before (2017) and after Maria (2018, 2020) to quantify landscape-scale changes in forest structure along a 439-ha elevational gradient (100–800 m) in the Luquillo Experimental Forest. Damages from Maria were widespread, with 73% of the study area losing ≥ 1 m in canopy height (mean = −7.1 m). Taller forests at lower elevations suffered more damage than shorter forests above 600 m. Yet only 13.5% of the study area had canopy heights ≤ 2 m in 2018, a typical threshold for forest gaps, highlighting the importance of damaged trees and advanced regeneration on post-storm forest structure. Heterogeneous patterns of regrowth and recruitment yielded shorter and more open forests by 2020. Nearly 45% of forests experienced initial height loss > 1 m (2017–2018) followed by rapid height gain > 1 m (2018–2020), whereas 21.6% of forests with initial height losses showed little or no height gain, and 17.8% of forests exhibited no height changes larger than ± 1 m in either period. Canopy layers < 10 m tall accounted for most increases in canopy height and fractional cover between 2018 and 2020, with gains split evenly between height growth and lateral crown expansion by surviving individuals. These findings benchmark rates of gap formation, crown expansion, and canopy closure following hurricane damage and highlight the diversity of ecosystem impacts from heterogeneous spatial patterns and vertical stratification of forest regrowth following a major disturbance event.

forest structure↗

NASA NTRS2021

Tracking the Rates and Mechanisms of Canopy Damage and Recovery Following Hurricane Maria Using Multitemporal Lidar Data

forest structure↗

NASA NTRS2022

A review of Carbon Monitoring in Wet Carbon Systems using Remote Sensing

Carbon monitoring is critical for the reporting and verification of carbon stocks and change. Remote sensing is a tool increasingly used to estimate the spatial heterogeneity, extent and change of carbon stocks within and across various systems. We designate the use of the term wet carbon system to the interconnected wetlands, ocean, river and streams, lakes and ponds, and permafrost, which are carbon-dense and vital conduits for carbon throughout the terrestrial and aquatic sections of the carbon cycle. We reviewed wet carbon monitoring studies that utilize earth observation to improve our knowledge of data gaps, methods, and future research recommendations. To achieve this, we conducted a systematic review collecting 1,622 references and screening them with a combination of text matching and a panel of three experts. The search found 496 references, with an additional 78 references added by experts. Our study found considerable variability of the utilization of remote sensing and global wet carbon monitoring progress across the nine systems analyzed. The review highlighted that remote sensing is routinely used to globally map carbon in mangroves and oceans, whereas seagrass, terrestrial wetlands, tidal marshes, rivers, and permafrost would benefit from more accurate and comprehensive global maps of extent. We identified three critical gaps and twelve recommendations to continue progressing wet carbon systems and increase cross system scientific inquiry.

Anthony D. Campbell↗

NASA NTRS2022

What Does Global Land Climate Look Like at 2°C Warming?

Constraining an increase in global mean temperature below 2°C compared to pre-industrial levels is critical to limiting dangerous and cascading impacts of anthropogenic climate change. Understanding future climatic changes and their spatial heterogeneity at 2°C warming is thus important for policy makers to prepare actionable adaptation and mitigation plans by identifying where and to what extent lives and livelihoods will be impacted. This study uses the recently released NASA Earth eXchange Global Daily Downscaled Projections (NEX-GDDP) CMIP6 data to provide a broad overview of projected changes in six key climate variables and two climate impact indicators at a time when warming exceeds 2°C. Analysis of global mean temperature changes indicates the 2040s as the decade when most CMIP6 models reach 2°C warming with respect to a pre-industrial period (1850–1900). During the 2040s, we find that global mean temperature, precipitation, relative humidity, downwelling shortwave and longwave radiation, and wind speed over land under the high emission scenario are projected to change by +2.8°C, +22.4 mm/year, −0.73%, −2.23 , +15.9 W/m 2 , and −0.04 m/s, respectively. Many of the future changes are expected to exacerbate climate impacts including heat stress and fire danger. Our analysis shows geographic patterns of policy-relevant climatic changes, as parts of the globe will experience significant climate impacts even if the goal to keep warming below 2°C goal is achieved. Our results highlight the urgent need for further studies focused on identifying key hotspots and advancing region-specific actionable adaptation and mitigation plans.

GDDP↗

NASA NTRS2023

A GeoNEX-Based High-Spatiotemporal-Resolution Product of Land Surface Downward Shortwave Radiation and Photosynthetically Active Radiation

Surface downward shortwave radiation (DSR) and photosynthetically active radiation (PAR) play critical roles in the Earth’s surface processes. As the main inputs of various ecological, hydrological, carbon, and solar photovoltaic models, increasing requirements for high-spatiotemporal-resolution DSR and PAR es- timation with high accuracy have been observed in recent years. However, few existing products satisfy all of these requirements. This study employed a well-established physical-based lookup table (LUT) approach to the GeoNEX gridded top-of-atmosphere bidirectional reflectance factor data acquired by the Advanced Hi- mawari Imager (AHI) and Advanced Baseline Imager (ABI) sensors. It produced a data product of DSR and PAR over both AHI and ABI coverage at an hourly temporal step with a 1 km spatial resolution. GeoNEX DSR data were validated over 63 stations, and GeoNEX PAR data were validated over 27 stations. The vali- dation showed that the new GeoNEX DSR and PAR products have accuracy higher than other existing prod- ucts, with root mean square error (RMSE) of hourly GeoNEX DSR achieving 74.3Wm−2 (18.0%), daily DSR estimation achieving 18.0 W m−2 (9.2 %), hourly GeoNEX PAR achieving 34.9 W m−2 (19.6 %), and daily PAR achieving 9.5 W m−2 (10.5 %). The study also demonstrated the application of the high-spatiotemporal- resolution GeoNEX DSR product in investigating the spatial heterogeneity and temporal variability of surface solar radiation. The data product can be freely accessed through the NASA Advanced Supercomputing Division GeoNEX data portal: https://data.nas.nasa.gov/geonex/geonexdata/GOES16/GEONEX-L2/DSR-PAR/ (last ac- cess: 12 March 2023) and https://data.nas.nasa.gov/geonex/geonexdata/HIMAWARI8/GEONEX-L2/DSR-PAR/ (last access: 12 March 2023) (https://doi.org/10.5281/zenodo.7023863; Wang and Li, 2022).

Surface downward shortwave radiation (DSR)↗

NASA NTRSDate not supplied

AMMPER: a user-friendly agent-based model that recapitulates simple metabolic responses of yeast to deep-space radiation

For humans venturing to deep space, radiation exposure poses a major health risk. Fundamental research into the biological effects of space radiation are essential for enabling exploration, and the first experimental organisms we send to deep space will be microbial. Yet there are many ways in which microorganisms are likely to experience the effects of high-energy particle radiation (such as Galactic Cosmic Rays) differently from multicellular animals, partly due to the simple fact that microbes are small and unicellular-- less likely to get hit in the first place, and less likely to communicate damage between cells. Computational modeling can aid in designing experiments and predicting the biological effects of radiation, but thus far particle radiation models have not focused on microbes. Here we present the latest developments in AMMPER, the Agent-based Model for Microbial Populations Exposed to Radiation. Originally written in 2021, AMMPER is a Python-based model that incorporates radiation track data from NASA's RITRACKS software and simulates the growth, damage, and death of yeast cells in 3D. It is now freely available as an open-source package on NASA's GitHub repository. Recent improvements include the ability to simulate the dynamics of alamarBlue, a color-changing redox dye commonly used to track metabolic activity in microbial spaceflight experiments. We demonstrate that a simple blue-pink-clear transition model is able to recapitulate key features observed in empirical data from ground studies. AMMPER also includes a new graphical user interface and introductory tutorial to facilitate ease of use by a wider audience. AMMPER can help us to understand how spatially heterogeneous particle radiation damage at the single-cell level can translate to growth differences at the population level, ultimately allowing us to better interpret experiments using microbes as model organisms and how well their results apply to humans.

yeast↗

NASA NTRSDate not supplied

Geochemical Insights Into Volcanic and Lithospheric Evolution of Mars

Introduction: The Martian lithosphere plays a pivotal role in volcanic processes, altering surface features, climate shifts, and the planet's early habitability. Crucially, the rigid lithosphere significantly influences Mars' long-term thermal conditions. Studying various geological eons’ volcanic compositions unveils how the lithosphere has evolved, even though understanding the early Noachian volcanic chemistry remains challenging due to weathering and resurfacing. In this study, newly discovered Noachian volcanic terranes[1-2] along with Hesperian and Amazonian volcanic terranes[3] are considered(Figure 1), to infer the evolution of the Martian lithosphere. Figure 1:Mars topographic map derived from MOLA-HRSC data [4] highlights the study regions including the Noachian volcanic terranes, Arabia Terra (AT), Thaumasia Minor (TM), and the Southwest Margin of Icaria Planum (SWIP)[5].Additionally, the Hesperian volcanic terranes such as Syrtis Major (SM), Hesperia Planum (HP), and, the Amazonian volcanic terranes encompass Elysium Mons (EM), Alba Patera (AP), and Olympus Mons (OM) are marked. Methods and Datasets: We use the most recent elemental mass fraction maps derived from gamma spectroscopy data from the Mars Odyssey 2001mission [6]to ascertain the bulk composition of the Martian landscape. Utilizing the updated geochemical provinces dataset of Mars[7], we consider bulk chemistry variations within our study regions. The maps, at a resolution of 50×50, encompass elements like Al, Ca, Fe, Si, K, Th, H2O, Cl, and S, detected through Gamma-Ray Spectroscopy (GRS) with decimeter scale depth sensitivity[6].Additional major and minor elements like Mg, Na, Ti, P, and Mn, using mass balance methods [8]serve as inputs for melting and crystallization simulations. We employ the pMELTS model with FMQ-3to FMQ oxygen fugacity to estimate the Pressure(P)and melting degree(F)in various eons of volcanic terranes. We have also used conventional thermobarometric calculations to determine their formation P-T conditions, using silica activity and olivine-melt Mg-exchange thermometry[9-10]. Results: Chemical Composition of Studied Volcanic Terranes: To assess formation conditions, we have investigated if GRS-measured compositions signify primary igneous processes by evaluating weathering through the Chemical Index of Alteration (CIA), K/Th ratios, and ternary plots for aqueous alteration. Consistent K/Th ratios and low CIA (<50) across volcanic regions suggest minimal large-scale weathering, affirming well-preserved igneous material extending at decimeter depths. In addition, the calculated bulk compositions align with Martian mantle equilibrium, confirming studied volcanic terranes-Arabia Terra, Thaumasia Minor, and SWIP -as primary or less altered compositions, reinforcing their representativeness at a regional GRS scale on Mars. We have also estimated the bulk compositions of Hesperian and Amazonian volcanic terranes shown in Figure 1. All volcanic terranes represent the primary or minimally altered composition. Temporal Evolution of Martian Volcanic Terranes: Our results show P-T conditions ranging from 1.3-1.6 GPa and 1350-1390°C for Noachian terranes, while Hesperian volcanic terranes vary from 1.6-1.7 GPa and 1370-1395°C, and Amazonian volcanic terranes range between 1.9-2.8 GPa and 1380-1415°C. Our analyses correspond to lithospheric thicknesses/ depth of melting for Noachian which ranges from110-135 km, 120-235 km for Hesperian terranes, and 160-235 km for Amazonian terranes. Partial melting percentages (F) range from 8-12% for Noachian, 10-11% for Hesperian, and 10-12% for Amazonian. We have also calculated mantle potential temperatures (Tp) to show variations across epochs(Figure 2). Heat flux estimation shows variations from 51-65 mW/m2 for Noachian, 38-45 mW/m2for Hesperian, and 27-39 mW/m2for Amazonian terranes, implying temporal changes in lithospheric thickness and heat flow. Comparison of Noachian volcanic terranes with Hesperian and Amazonian reveals variations in lithospheric thickness and heat flux, indicating potential implications for Martian surface conditions, including volcanic activity, climate evolution, and early habitability. Figure 2: P-T diagram displays formation conditions of studied Martian volcanic regions using GRS data, alongside Noachian-age surface basalt samples from Gusev, Gale, and Jezero. Dashed lines represent Martian mantle potential temperatures, calculated by adding the latent heat of fusion to the equilibrium temperature at which melt and solid mantle coexist and subtracting the Martian adiabatic gradient corresponding to the depth of melt. The solid line shows the Martian mantle solidus [11].Discussion& Implication: The study explores Martian volcanic activity across eons. Uniform lithospheric thickness from the Noachian to Hesperian eons suggests persistent weak plumes until Hesperian, influencing heat flow variations. Noachian's high heat flux, likely due to concentrated radioactive elements, shows spatial heterogeneity, indicating early Mars' differentiated mantle. Volcanic outgassing plays avital role in the formation of the Martian climate, likely sustained water on the surface, influencing warm-wet or cold-dry conditions. Hesperian's favorable lithospheric heat flow (45 mW/m2) supports extended water existence, resembling Earth's conditions. Whereas, Amazonian's diminished heat flux (25 mW/m2) corresponds to water loss and arid climate. Hesperian's similar lithospheric thickness to mid-Noachian implies prolonged water retention, influencing climate and potential for astrobiological research, expanding perspectives for future Martian missions. Future work: As volcanism was active throughout its history. The emergence of Mars' extensive volcanic regions, known as large igneous provinces, which are linked to intermittent volcanic activity driven by mantle plumes, poses challenges to understanding the scale and persistence of these phenomena in Martian convection models. Therefore, understanding the regional-scale changes in eruptive processes within Martian volcanic provinces over time remains unclear and crucial for deciphering the evolution of the Martian interior without Earth-like plate tectonics. We will continue this work with petrological and thermoelastic analyses to study the compositional and spatiotemporal evolution of the Elysium Volcanic Province.

A Rani↗

NASA NTRSDate not supplied

Improving Ocean Reanalyses and ENSO Forecasts By Assimilation of Rain Corrected Satellite Sea Surface Salinity Using the GMAO S2S Forecast System

During the past years, we have seen that the La Nina to El Nino transition has had a significant global socio-economic impact and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of satellite altimetry and subsurface temperature and salinity from (mostly) Argo help to improve the initialization of the thermocline, while satellite Sea Surface Temperature (SST) aids in constraining surface heat-fluxes, leading to improved subseasonal to seasonal forecasts of the coupled system. However, few studies have focused on improving the fresh-water flux and near-surface density and mixing through assimilation of satellite sea surface salinity (SSS). For expediency, the few ocean models that do assimilate SSS bias-correct the satellite SSS data to normalize towards the near-surface Argo data. However, in rainy regions, where buoyant water sits as a fresh lens at the surface, this assumption is likely inadequate. In previous work, we have shown that adjusting SSS data to bulk salinity (Sb) using the Rain Impact Model (RIM) of Santos-Garcia et al., 2014 has improved the near-surface density and mixed layer depth, leading to deeper thermocline and improved the NINO3.4 SST forecasts. Now we utilize the Soil Moisture/Ocean Salinity, Rain Corrected (SMOS_RC) SSS product provided by the Centre Aval de Traitement des données SMOS (CATDS CPDC) to represent the Sb more accurately at first model layer (in our case 5 m). Rather than using a diffusivity model as with RIM, SMOS_RC relies on an observed relationship between the spatial heterogeneity of SMOS SSS and instantaneous rain rate (RR) (Supply et al., 2020). In order to test the impact of SMOS_RC versus SMOS, we compare two reanalyses over the period 2014 to 2021. For both reanalysis experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF scheme (Penny et al., 2013). One reanalysis additionally assimilates SMOS SSS data as is (i.e., with the fresh bias), and a separate reanalysis is performed assimilating the SMOS_RC data. We assess the impact for near-surface and subsurface dynamics within ocean reanalyses by validating against observations and explore how SSS assimilation (SMOS versus SMOS_RC) impacts dynamical ENSO forecasts using the NASA GMAO Sub-seasonal to Seasonal coupled forecast system (GEOS S2S-3, Molod et al., 2020, Hackert et al., 2023). We will show that improved SSS estimates and near-surface density and mixing led to more accurate coupled air/sea interaction and better ENSO forecasts.

Eric Hackert↗