Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sparse”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

A generalized geologic map of Mars.

A geologic map of Mars has been constructed largely on the basis of photographic evidence. Four classes of units are recognized: (1) primitive cratered terrain, (2) sparsely cratered volcanic eolian plains, (3) circular radially symmetric volcanic constructs such as shield volcanoes, domes, and craters, and (4) tectonic erosional units such as chaotic and channel deposits. Grabens are the main structural features; compressional and strike slip features are almost completely absent. Most grabens are part of a set radial to the main volcanic area, Tharsis.

Carr, M. H.↗
NASA NTRS1973

Global detailed gravimetric geoid

A global detailed gravimetric geoid has been computed by combining the Goddard Space Flight Center GEM-4 gravity model derived from satellite and surface gravity data and surface 1 deg-by-1 deg mean free air gravity anomaly data. The accuracy of the geoid is + or - 2 meters on continents, 5 to 7 meters in areas where surface gravity data are sparse, and 10 to 15 meters in areas where no surface gravity data are available. Comparisons have been made with the astrogeodetic data provided by Rice (United States), Bomford (Europe), and Mather (Australia). Comparisons have also been carried out with geoid heights derived from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe, and Australia.

Vincent, S.↗
NASA NTRS1973

Surface roughness effects on the supersonic aerodynamics of the Rockwell International 089B-139 orbiter

An experimental test program was conducted to determine the effects of vehicle surface roughness on the supersonic aerodynamic characteristics of a 0.01875 scale model of a space shuttle configuration. Surface roughness was simulated by applying a sparse coating of carborundum grit to complete model. Various grit sizes were investigated. The tests were conducted in a wind tunnel at Mach numbers from 1.60 to 4.63. The angle of attack was varied from about -2 deg to as much as 42 deg at 0 deg and + or - 3 deg of sideslip. The angle of sideslip was varied from -8 deg to 8 deg at angles of attack from 0 deg to 40 deg.

Ware, G. M.↗
NASA NTRS1974

Global detailed geoid computation and model analysis

Comparisons and analyses were carried out through the use of detailed gravimetric geoids which we have computed by combining models with a set of 26,000 1 deg x 1 deg mean free air gravity anomalies. The accuracy of the detailed gravimetric geoid computed using the most recent Goddard earth model (GEM-6) in conjunction with the set of 1 deg x 1 deg mean free air gravity anomalies is assessed at + or - 2 meters on the continents of North America, Europe, and Australia, 2 to 5 meters in the Northeast Pacific and North Atlantic areas, and 5 to 10 meters in other areas where surface gravity data are sparse. The R.M.S. differences between this detailed geoid and the detailed geoids computed using the other satellite gravity fields in conjuction with same set of surface data range from 3 to 7 meters.

Marsh, J. G.↗
NASA NTRS1973

Determination of stratospheric temperature and height gradients from Nimbus 3 radiation data

To improve the specification of stratospheric, horizontal, temperature and geopotential height fields needed for high-flying aircraft, we derived a technique to estimate data between satellite tracks using interpolated infrared interferometer spectrometer 15-micron radiation data from Nimbus 3. The interpolation is based on the observed gradients of the medium resolution infrared 15-micron radiances between subsatellite tracks. The technique was verified with radiosonde data taken within 6 hr of the satellite data. Comparison indicates that the technique developed here produces analyses that are in general agreement with those from radiosonde data. In addition, this technique provides details over areas of sparse data not shown by conventional techniques.

Nicholas, G. W.↗
NASA NTRS1974

Fluid-structure finite-element vibrational analysis

A fluid finite element has been developed for a quasi-compressible fluid. Both kinetic and potential energy are expressed as functions of nodal displacements. Thus, the formulation is similar to that used for structural elements, with the only differences being that the fluid can possess gravitational potential, and the constitutive equations for fluid contain no shear coefficients. Using this approach, structural and fluid elements can be used interchangeably in existing efficient sparse-matrix structural computer programs such as SPAR. The theoretical development of the element formulations and the relationships of the local and global coordinates are shown. Solutions of fluid slosh, liquid compressibility, and coupled fluid-shell oscillation problems which were completed using a temporary digital computer program are shown. The frequency correlation of the solutions with classical theory is excellent.

Feng, G. C.↗
NASA NTRS1975

The detection of geothermal areas from Skylab thermal data

Skylab-4 X-5 thermal data of the geysers area was analyzed to determine the feasibility of using midday Skylab images to detect geothermal areas. The hottest ground areas indicated on the Skylab image corresponded to south-facing barren or sparsely vegetated slopes. A geothermal area approximately 15 by 30 m coincided with one of the hottest areas indicated by Skylab. This area could not be unambiguously distinguished from the other areas which are believed to be hotter than their surroundings as a result of their topography, and micrometeorological conditions. A simple modification of a previous thermal model was performed and the predicted temperatures for the hottest slopes using representative values was in general agreement with the observed data. It is concluded that data from a single midday Skylab pass cannot be used to locate geothermal areas.

Siegal, B. S.↗
NASA NTRS1975

Calibration and evaluation of Skylab altimetry for geodetic determination of the geoid

The author has identified the following significant results. The Skylab altimeter experiment has proven the capability of the altimeter for measurement of sea surface topography. The geometric determination of the geoid/mean sea level from satellite altimetry is a new approach having significant applications in many disciplines including geodesy and oceanography. A generalized least squares collocation technique was developed for determination of the geoid from altimetry data. The technique solves for the altimetry geoid and determines one bias term for the combined effect of sea state, orbit, tides, geoid, and instrument error using sparse ground truth data. The influence of errors in orbit and a priori geoid values are discussed. Although the Skylab altimeter instrument accuracy is about plus or minus 1m, significant results were obtained in identification of large geoidal features such as over the Puerto Rico trench. Comparison of the results of several passes shows that good agreement exists between the general slopes of the altimeter geoid and the ground truth, and that the altimeter appears to be capable of providing more details than are now available with best known geoids.

Mourad, A. G.↗
NASA NTRS1975

A multidisciplinary study of earth resources imagery of Australia, Antarctica and Papua, New Guinea

The author has identified the following significant results. A thirteen category recognition map was prepared, showing forest, water, grassland, and exposed rock types. Preliminary assessment of classification accuracies showed that water, forest, meadow, and Niobrara shale were the most accurately mapped classes. Unsatisfactory results, were obtained in an attempt to discrimate sparse forest cover over different substrates. As base elevation varied from 7,000 to 13,000 ft, with an atmospheric visibility of 48 km, no changes in water and forest recognition were observed. Granodiorite recognition accuracy decreased monotonically as base elevation increased, even though the training set location was at 10,000 ft elevation. For snow varying in base elevation from 9400 to 8420 ft, recognition decreases from 99% at the 9400 ft training set elevation to 88% at 8420 ft. Calculations of expected radiance at the ERTS sensor from snow reflectance measured at the site and from Turner model calculations of irradiance, transmission and path radiance, reveal that snow signals should not be clipped, assuming that calculations and ERTS calibration constants were correct.

Fisher, N. H.↗
NASA NTRS1975

Analysis of large power systems

Computer-oriented power systems analysis procedures in the electric utilities are surveyed. The growth of electric power systems is discussed along with the solution of sparse network equations, power flow, and stability studies.

Dommel, H. W.↗
NASA NTRS1975

Matrix bandwidth and profile reduction

This program, REDUCE, reduces the bandwidth and profile of sparse symmetric matrices, using row and corresponding column permutations. It is a realization of the algorithm described by the authors elsewhere. It was extensively tested and compared with several other programs and was found to be considerably faster than the others, superior for bandwidth reduction and as satisfactory as any other for profile reduction.

Crane, H. L., Jr.↗
NASA NTRS1974

Global detailed gravimetric geoid

A global detailed gravimetric geoid has been computed by combining the Goddard Space Flight Center GEM-4 gravity model derived from satellite and surface gravity data and surface 1 x 1-deg mean free-air gravity anomaly data. The accuracy of the geoid is plus or minus 2 meters on continents, 5 to 7 meters in areas where surface gravity data are sparse, and 10 to 15 meters in areas where no surface gravity data are available. Comparisons have been made with the astrogeodetic data provided by Rice (United States), Bomford (Europe), and Mather (Australia). Comparisons have also been carried out with geoid heights derived from satellite solutions for geocentric station coordinates in North America, the Caribbean, Europe and Australia.

Vincent, S.↗
NASA NTRS1975

Preflight studies on tolerance of pocket mice to oxygen and heat. II - Effects on lungs

An electron microscope examination was carried out on the lungs of 11 pocket mice (Perognathus longimembris) that breathed oxygen at 10 psi or 12 psi partial pressure over a period of 7 d, at the end of which time they were decompressed to sea-level O2 pressure, either suddenly or in 30, 60, or 90 min. Vesiculation was noted in the endothelium of the alveolar-capillary wall in most of the animals and, occasionally, blebbing. Some mitochrondria were swollen in a few of the animals. Alveolar exudate was, in general, sparse. Compared with the lungs of other rodents, the lungs of pocket mice appeared relatively resistant to the toxic effects of oxygen. This conclusion needs, however, to be tempered by the fact that 5% N2 was used in the tests reported here. Nonetheless, the results suggest that the oxygen pressures anticipated on the flight of Apollo XVII should be well tolerated by the pocket mice.

Harrison, G. A.↗
NASA NTRS1977

SPAR: Structural-performance analysis and redesign

System of processor programs performs stress, buckling, and vibrational analysis of large linear finite element systems in excess of 50,000 degrees of freedom, while minimizing processing cost, execution time, central memory storage, and secondary data storage requirements. Programs use sparse matrix solution techniques and other computational and data management procedures.

Whetstone, W. D.↗
NASA NTRS1975

The significance of the Skylab altimeter experiment results and potential applications

The Skylab Altimeter Experiment has proven the capability of the altimeter for measurement of sea surface topography. The geometric determination of the geoid/mean sea level from satellite altimetry is a new approach having significant applications in many disciplines including geodesy and oceanography. A Generalized Least Squares Collocation Technique was developed for determination of the geoid from altimetry data. The technique solves for the altimetry geoid and determines one bias term for the combined effect of sea state, orbit, tides, geoid, and instrument error using sparse ground truth data. The influence of errors in orbit and a priori geoid values are discussed. Although the Skylab altimeter instrument accuracy is about + or - 1 m, significant results were obtained in identification of large geoidal features such as over the Puerto Rico trench. Comparison of the results of several passes shows that good agreement exists between the general slopes of the altimeter geoid and the ground truth, and that the altimeter appears to be capable of providing more details than are now available with best known geoids. The altimetry geoidal profiles show excellent correlations with bathymetry and gravity. Potential applications of altimetry results to geodesy, oceanography, and geophysics are discussed.

Mourad, A. G.↗
NASA NTRS1976

National project for the evaluation of ERTS imagery applications to various earth resources problems of Turkey

The author has identified the following significant results. It is observed that LANDSAT images can be used in preparing an accurate tectonic map of the study areas. These images are most useful in geological mapping areas where vegetation cover is sparse. LANDSAT images can be used to identify and separate evergreens and trees with leaves, and they can successfully delineate boundaries of forestry areas. Water holding capacity of the soil, internal and external drainage, vegetation pattern, irrigated and nonirrigated land, and fallow and planted fields are also detected on the LANDSAT imagery.

Alpan, S.↗
NASA NTRS1976

SPAR reference manual

The functions and operating rules of the SPAR system, which is a group of computer programs used primarily to perform stress, buckling, and vibrational analyses of linear finite element systems, were given. The following subject areas were discussed: basic information, structure definition, format system matrix processors, utility programs, static solutions, stresses, sparse matrix eigensolver, dynamic response, graphics, and substructure processors.

Whetstone, W. D.↗
NASA NTRS1976

Urban land use monitoring from computer-implemented processing of airborne multispectral data

Machine processing techniques were applied to multispectral data obtained from airborne scanners at an elevation of 600 meters over central Indianapolis in August, 1972. Computer analysis of these spectral data indicate that roads (two types), roof tops (three types), dense grass (two types), sparse grass (two types), trees, bare soil, and water (two types) can be accurately identified. Using computers, it is possible to determine land uses from analysis of type, size, shape, and spatial associations of earth surface images identified from multispectral data. Land use data developed through machine processing techniques can be programmed to monitor land use changes, simulate land use conditions, and provide impact statistics that are required to analyze stresses placed on spatial systems.

Todd, W. J.↗