Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sonic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Sonic boom measurement test plan for Space Shuttle STS-5 launch

Sonic booms measurements are obtained at key locations within the focus region and the lateral attenuation rate during ascent is determined in order to assess the validity of existing capability to predict the extent of focus boom area, the number of booms within the various zones (focus and nonfocus regions), the overpressures, and focus factors. The sonic boom focus region, consists of a region on the ground (in the form of an inverted 'horseshoe' pattern) in which higher than nominal overpressures can occur.

Henderson, H. R.↗
NASA NTRS1984

Sonic levitation apparatus

A sonic levitation apparatus is disclosed which includes a sonic transducer which generates acoustical energy responsive to the level of an electrical amplifier. A duct communicates with an acoustical chamber to deliver an oscillatory motion of air to a plenum section which contains a collimated hole structure having a plurality of parallel orifices. The collimated hole structure converts the motion of the air to a pulsed. Unidirectional stream providing enough force to levitate a material specimen. Particular application to the production of microballoons in low gravity environment is discussed.

Dunn, S. A.↗
NASA NTRS1985

Development of the sonic pump levitator

The process and mechanism involved in producing glass microballoons (GMBs) of acceptable quality for laser triggered inertial fusion through use of glass jet levitation and manipulation are considered. The gas jet levitation device, called sonic pumps, provides positioning by timely and appropriate application of gas mementum from one or more of six sonic pumps which are arranged orthogonally in opposed pairs about the levitation region and are activated by an electrooptical, computer controlled, feedback system. The levitation device was fabricated and its associated control systems were assembled into a package and tested in reduced gravity flight regime of the NASA KC-135 aircraft.

Dunn, S. A.↗
NASA NTRS1985

Statistical theories of Langmuir turbulence. II - Subsonic to sonic transition

The subsonic limit of the quadratic direct interaction approximation (DIA) applied to the Zakharov equations is compared with the cubic DIA applied to the nonlinear Schroedinger equation, which is the subsonic limit of the Zakharov equations. Comparisons with Monte Carlo simulations of a truncated system show that the first theory more accurately describes the regime of stationary turbulence, while the second theory more accurately describes the subsonic evolution of the modulational instability. The weak turbulence limits of the two theories describe the sonic and subsonic regimes, respectively. The addition of vertex corrections to the DIA leads to a hybrid weak turbulence theory that smoothly interpolates between the sonic and subsonic regimes.

Dubois, D. F.↗
NASA NTRS1986

Status and capabilities of sonic boom simulators

The current status and capabilities of sonic boom simulators which might be used in future studies of the effects of sonic boom on people, animals, or structures is summarized. The list of candidate simulators is based on a literature search which was confined to the United States and Canada. Some of the simulators are fully operational, others could be made operational with a modest investment, and still others would require a major investment. For the sake of the completeness, some simulators which were the subject of a previous review, but which no longer exist, are also included herein.

Shepherd, K. P.↗
NASA NTRS1987

Some numerical calculations by using linear classical sonic theories approached from sub- or supersonic speeds

The unsteady aerodynamics of a two-dimensional wing at sonic speed are studied by using so-called classical sonic theories (linear), approached from supersonic flow (M=1+0) or subsonic flow (M=1-0). In the former approach, the exact expressions of lift and lift distribution are obtained in terms of Fresnel integrals, while in the latter approach an integral equation must be solved, the kernel function of which is obtained from the subsonic Possio's equation and has a root singularity. The discrete analysis is adopted on the basis of the semicircle method (SCM) and the weighting function for subsonic-flow-Gauss-quadrature, as well as modified characteristics obtained from both approaches agree quite well with each other. The results obtained by the present computations are compared with those of DLM-C (subsonic 2D code) developed by ANDO et al, and are found to give a reasonable outer boundary for subsonic unsteady aerodynamics.

Yamamoto, Y.↗
NASA NTRS1990

A study of sonic boom overpressure trends with respect to weight, altitude, Mach number, and vehicle shaping

This paper presents and discusses trends in nose shock overpressure generated by two conceptual Mach 2.0 configurations. One configuration was designed for high aerodynamic efficiency, while the other was designed to produce a low boom, shaped-overpressure signature. Aerodynamic lift, sonic boom minimization, and Mach-sliced/area-rule codes were used to analyze and compute the sonic boom characteristics of both configurations with respect to cruise Mach number, weight, and altitude. The influence of these parameters on the overpressure and the overpressure trends are discussed and conclusions are given.

Needleman, Kathy E.↗
NASA NTRS1991

A methodology for designing aircraft to low sonic boom constraints

A method for designing conceptual supersonic cruise aircraft to meet low sonic boom requirements is outlined and described. The aircraft design is guided through a systematic evolution from initial three view drawing to a final numerical model description, while the designer using the method controls the integration of low sonic boom, high supersonic aerodynamic efficiency, adequate low speed handling, and reasonable structure and materials technologies. Some experience in preliminary aircraft design and in the use of various analytical and numerical codes is required for integrating the volume and lift requirements throughout the design process.

Mack, Robert J.↗
NASA NTRS1991

Development of a computer technique for the prediction of transport aircraft flight profile sonic boom signatures

A new computer technique for the analysis of transport aircraft sonic boom signature characteristics was developed. This new technique, based on linear theory methods, combines the previously separate equivalent area and F function development with a signature propagation method using a single geometry description. The new technique was implemented in a stand-alone computer program and was incorporated into an aircraft performance analysis program. Through these implementations, both configuration designers and performance analysts are given new capabilities to rapidly analyze an aircraft's sonic boom characteristics throughout the flight envelope.

Coen, Peter G.↗
NASA NTRS1991

CFD prediction of the near-field sonic boom environment for two low boom HSCT configurations

Current efforts to reduce the sonic boom of a future High Speed Civil Transport (HSCT) by careful shaping have led to the need for more accurate predictions of the near-field flow conditions of the configuration. A fully three-dimensional Euler finite volume code is used to predict sonic boom pressure signatures for two low boom concepts - one designed to cruise at Mach 2 and the other at Mach 3. Calculations were carried out using a grid topology that has been modified to reduce the inaccuracies caused by grid spreading often suffered with CFD methods when calculations several body lengths downstream become necessary. Comparisons of CFD results and experimental wind tunnel signatures are shown. Ground signatures are predicted by extrapolating the pressures predicted by the Euler code with an extrapolation method based on the Whitham theory.

Siclari, M. J.↗
NASA NTRS1992

Evaluation of outdoor-to-indoor response to minimized sonic booms

Various studies were conducted by NASA and others on the practical limitations of sonic boom signature shaping/minimization for the High-Speed Civil Transport (HSCT) and on the effects of these shaped boom signatures on perceived loudness. This current effort is a further part of this research with emphasis on examining shaped boom signatures which are representative of the most recent investigations of practical limitations on sonic boom minimization, and on examining and comparing the expected response to these signatures when experienced indoors and outdoors.

Brown, David↗
NASA NTRS1992

A numerical model for sonic boom propagation through an inhomogeneous, windy atmosphere

The ZEPHYRUS computer model calculates sonic boom distortion during propagation through the atmosphere. The model includes the effects of nonlinear distortion, attenuation, dispersion, and wind. Trial runs with the model indicate that, in general, stable shocks have not formed when the sonic boom reaches the ground. Also, the rise time of the lead shock may strongly depend on the overall waveform shape, and may be significantly increased by purely dispersive effects when matching occurs between the rise time and the characteristic oxygen molecular relaxation time.

Robinson, Leick D.↗
NASA NTRS1992

Simulations of sonic boom ray tube area fluctuations for propagation through atmospheric turbulence including caustics via a Monte Carlo method

A theory which gives statistical predictions for how often sonic booms propagating through the earth's turbulent boundary layer will encounter caustics, given the spectral properties of the atmospheric turbulence, is outlined. The theory is simple but approximately accounts for the variation of ray tube areas along ray paths. This theory predicts that the variation of ray tube areas is determined by the product of two similar area factors, psi (x) and phi (x), each satisfying a generic harmonic oscillator equation. If an area factor increases the peak acoustic pressure decreases, and if the factor decreases the peak acoustic pressure increases. Additionally, if an area factor decreases to zero and becomes negative, the ray has propagated through a caustic, which contributes a phase change of 90 degrees to the wave. Thus, it is clear that the number of times that a sonic boom wave passes through a caustic should be related to the distorted boom waveform received on the ground. Examples are given based on a characterization of atmospheric turbulence due to the structure function of Tatarski as modified by Crow.

Sparrow, Victor W.↗
NASA NTRS1990

The effect of molecular relaxation processes in air on the rise time of sonic booms

A theory is developed to explain the effect of molecular relaxation processes on the rise time of sonic booms. To determine the rise time of sonic booms, both O2 and N2 relaxation processes must be included. The N2 relaxation process delays the shock pressure reaching the maximum pressure, and the O2 relaxation process causes a shock profile to have a gentle slope. The N2 relaxation controls the lower part of overpressure; the O2 relaxation controls the higher part. The constant rise time curves show that the rise times increase as the overpressures and humidity decrease. The present approach gives longer rise times than those acquired by Bass et al. for given shock overpressures.

Kang, Jongmin↗
NASA NTRS1992

A practical low-boom overpressure signature based on minimum sonic boom theory

A brief resume of sonic boom minimization methods is given to provide a background for a new, empirical modification of the Seebass and George minimum-nose-shock sonic boom F-function and signature. The new 'hybrid' F-function has all the inherent flexibility of application found with the Darden-modified Seebass and George F-function. In addition, it has enhanced this flexibility and applicability with neglegible increase in nose and/or tail shock strength. A description of this 'hybrid' F-function and signature is provided, and the benefits of using them to design high-performance, low-boom aircraft are discussed.

Mack, Robert J.↗
NASA NTRS1992

Supersonic airplane design optimization method for aerodynamic performance and low sonic boom

This paper presents a new methodology for the optimization of supersonic airplane designs to meet the dual design objectives of low sonic boom and high aerodynamic performance. Two sets of design parameters are used on an existing High Speed Civil Transport (HSCT) configuration to maximize the aerodynamic performance and minimize the sonic boom under the flight track. One set of the parameters perturbs the camber line of the wing sections to maximize the lift-over-drag ratio (L/D). A preliminary optimization run yielded a 3.75 percent improvement in L/D over a baseline low-boom configuration. The other set of parameters modifies the fuselage area to achieve a target F-function. Starting from an initial configuration with strong bow, wing, and tail shocks, a modified design with a flat-top signature is obtained. The methods presented can easily incorporate other design variables and objective functions. Extensions to the present capability in progress are described.

Cheung, Samson H.↗
NASA NTRS1992

Computational/experimental analysis of three low sonic boom configurations with design modifications

The Euler code, designated AIRPLANE, which uses an unstructured tetrahedral mesh was used to compute near-field sonic boom pressure signatures on three modern low sonic boom configurations: the Mach 2, Mach 3, and Haglund models. The TEAM code which uses a multi-zoned structured grid was used to calculate pressure signatures for the Mach 2 model. The computational pressure signatures for the Mach 2 and Mach 3 models are compared with recent experimental data. The computed pressure signatures were extracted at distances less than one body length below the configuration and extrapolated to the experimental distance. The Mach 2 model was found to have larger overpressures off-ground-track than on-ground-track in both computational and experimental results. The correlations with the experiment were acceptable where the signatures were not contaminated by instrumentation and model-support hardware. AIRPLANE was used to study selected modifications to improve the overpressures of the Mach 2 model.

Cliff, Susan E.↗