Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Microstructural features of the La{sub 1−x}Ca{sub x}FeO{sub 3−δ} solid solutions prepared via Pechini route

Highlights: • La{sub 1−x}Ca{sub x}FeO {sub (3−δ)} (0 ≤ x ≤ 0.7) perovskite were prepared by Pechini method. • Planar defects in direction (1 0 1) were observed in the perovskite surface. • α-Fe{sub 2}O{sub 3} particles (1–10 nm) on the surface of perovskite were revealed. • Amount of α-Fe{sub 2}O{sub 3} particles on the perovskite surface grew with rising x values. - Abstract: Solid solutions with La{sub 1−x}Ca{sub x}FeO{sub 3−δ} (0 ≤ x ≤ 0.7) perovskite-like structure prepared via Pechini route have been investigated by using high resolution transmission electron microscopy and X-ray diffraction. Extended planar defects lying in (1 0 1) crystallographic planes and α-Fe{sub 2}O{sub 3} nanoparticles on the surface of perovskite microcrystals are characteristic of the samples under investigation. It was found that testing of the samples in catalytic deep CH{sub 4} oxidation process results in partial destruction of solid solutions with formation of planar defects in the bulk and α-Fe{sub 2}O{sub 3} particles on the surface.

36 MATERIALS SCIENCE↗

Mechanochemical synthesis of nanostructured Sr(Ti{sub 1-x}Fe{sub x})O{sub 3-{delta}} solid-solution powders and their surface photovoltage responses

A series of nanostructure Sr(Ti{sub 1-x}Fe{sub x})O{sub 3-{delta}} (STFx, x=0.4, 0.6, 0.8) solid-solution powders were synthesized by mechanochemical approach milling from the mixture of SrO, Fe{sub 2}O{sub 3} and TiO{sub 2} metal oxides at room temperature. The XRD results revealed that the perovskite STFx nanoparticles were finally formed with few residual {alpha}-Fe{sub 2}O{sub 3} detected dependent on the milling conditions. The structure evolution suggested that the mechanochemical synthesis underwent via a solid-state reaction route to initially form Ti-rich perovskite and then incorporate with the residual {alpha}-Fe{sub 2}O{sub 3} to achieve the estimated composition. The synthesized STF08 powders exhibited the significant Surface Photovoltage (SPV) spectrum response both in UV and in visible-light region with p-type semiconductor behavior. This finding suggested that the synthesized STF nanopowders could potentially utilize more solar spectrum energy effectively for photo-oxidation and photo-catalysis applications. - Graphical abstract: It is demonstrated that Sr(Ti{sub 1-x}Fe{sub x})O{sub 3-{delta}} perovskite nanopowders were successfully synthesized by mechanochemical reaction approach at room temerpature, and the synthesized STF08 powders showed the significant SPV response in UV-VIS region with p-type semiconductor behaviors. Highlights: Black-Right-Pointing-Pointer Sr(Ti{sub 1-x}Fe{sub x})O{sub 3-{delta}} nanopowders synthesized by mechanochemical reaction approach. Black-Right-Pointing-Pointer The reaction process was shorten by introduce high impact energy. Black-Right-Pointing-Pointer Synthesized STF08 powders show the significant SPV response in UV-VIS region. Black-Right-Pointing-Pointer Synthesized STFx powders show p-type semiconductor behaviors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monophasic zircon-type tetragonal Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution: synthesis, characterization, and optical properties

Highlights: • Complete Eu{sub 1−x}Bi{sub x}VO{sub 4} with zircon-type structure was successfully synthesized. • The band gap of the samples could be adjusted and controlled by bismuth content. • Eu{sub 1−x}Bi{sub x}VO{sub 4} show strong red emission under both near UV and visible-light excitation. - Abstract: By combining the methods of co-precipitation and hydrothermal synthesis methods, the complete solid-solution of Eu{sub 1−x}Bi{sub x}VO{sub 4} with monophasic zircon-type structure was successfully synthesized. The zircon-type structure was determined by X-ray diffractometer and Raman scattering, and the optical properties were characterized by ultraviolet-visible diffuse reflectance and photoluminescence spectrophotometer. The results indicate that the band gap of Eu{sub 1−x}Bi{sub x}VO{sub 4} could be adjusted and controlled by bismuth content in the range of x = 0–0.9. Meanwhile, the Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution phosphors show strong red light emission was shown in 619 nm under both near UV-light and visible-light excitation. Notably, the emission intensity of Eu{sub 1−x}Bi{sub x}VO{sub 4} (x = 0.4) is the strongest in all samples.

36 MATERIALS SCIENCE↗

Energetics of a uranothorite (Th 1– x U x SiO 4 ) solid solution

High-temperature oxide melt solution calorimetric measurements were completed to determine the enthalpies of formation of the uranothorite, (USiO 4 ) x –(ThSiO 4 ) 1–x , solid solution. Phase-pure samples with x values of 0, 0.11, 0.21, 0.35, 0.71, and 0.84 were prepared, purified, and characterized by powder X-ray diffraction, electron probe microanalysis, thermogravimetric analysis and differential scanning calorimetry coupled with in situ mass spectrometry, and high-temperature oxide melt solution calorimetry. This work confirms the energetic metastability of coffinite, USiO 4 , and U-rich intermediate silicate phases with respect to a mixture of binary oxides. Furthermore, variations in unit cell parameters and negative excess volumes of mixing, coupled with strongly exothermic enthalpies of mixing in the solid solution, suggest short-range cation ordering that can stabilize intermediate compositions, especially near x = 0.5.

36 MATERIALS SCIENCE↗

31P MAS-NMR study of flux-grown rare-earth element orthophosphate (monazite/xenotime) solid solutions: Evidence of random cation distribution from paramagnetically shifted NMR resonances

We present 31P magic angle spinning nuclear magnetic resonance (MAS-NMR) spectra of flux-grown solid solutions of La1-xCexPO4 ( x between 0.027 and 0.32) having the monoclinic monazite structure, and of Y1-xMxPO4 (M = Vn+, Ce3+, Nd3+, x between 0.001 and 0.014) having the tetragonal zircon structure. Paramagnetically shifted NMR resonances are observed in all samples due to the presence of paramagnetic Vn+, Ce3+, and Nd3+ in the diamagnetic LaPO4 or YPO4. As a first-order observation, the number and relative intensity of these peaks is related to the symmetry and structure of the diamagnetic host phase. The presence of paramagnetic shifts allows for increased resolution between NMR resonances for distinct atomic species which leads to the observation of low intensity peaks related to PO4 species having more than one paramagnetic neighbor two or four atomic bonds away. Through careful analysis of peak areas and comparison with predictions for simple models, it was determined that solid solutions in the systems examined here are characterized by complete disorder (random distribution) of diamagnetic La3+ or Y3+ with the paramagnetic substitutional species Ce3+ and Nd3+. The increased resolution given by the paramagnetic interactions also leads to the observation of splitting of specific resonances in the 31P NMR spectra that may be caused by local, small-scale distortions from the substitution of ions having dissimilar ionic radii.

Palke, A. C.↗

La-driven morphotropic phase boundary in the Bi(Zn1/2Ti1/2)O3-La(Zn1/2Ti1/2)O3-PbTiO3 solid solution

We explore the Bi(Zn$_{1/2}$Ti$_{1/2}$)O$_3$-La(Zn$_{1/2}$Ti$_{1/2}$)O$_3$-PbTiO$_3$ pseudoternary phase diagram using density functional theory and a solid solution model. We find a region of stability against phase segregation that contains a morphotropic phase boundary. Based on the results we identify a ferroelectrically active composition region that is likely to show strong electro-mechanical response. Furthermore, we find that La replacement for Bi not only lowers the polarization as might be expected, but also shifts the balance from tetragonality towards rhombohedral distortions. This may be of general use in modifying phase diagrams of $A$-site driven perovskite ferroelectric solid solutions to generate new morphotropic phase boundary systems.

Cooper, Valentino R↗

Giant magnetic coercivity in CaCu{sub 5}-type SmNi{sub 3}TSi (T=Mn–Cu) solid solutions

The effects of transition metal substitution for Ni on the magnetic properties of the CaCu{sub 5}-type SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) solid solutions have been investigated. SmNi{sub 3}MnSi, SmNi{sub 3}FeSi, SmNi{sub 3}CoSi and SmNi{sub 3}CuSi show ferromagnetic ordering at 125 K, 190 K, 46 K and 12 K and field induced transitions at 65 K, 110 K, 30 K and 6 K, respectively. The magnetocaloric effects of SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) were calculated in terms of isothermal magnetic entropy change (ΔS{sub m}). The magnetic entropy ΔS{sub m} reaches value of −1.1 J/kg K at 130 K for SmNi{sub 3}MnSi, −0.4 J/kg K at 180 K for SmNi{sub 3}FeSi, −0.37 J/kg K at 45 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 12 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the ferromagnetic ordering temperature. They show positive ΔS{sub m} of +2.4 J/kg K at 30 K for SmNi{sub 3}MnSi, −2.6 J/kg K at 65 K for SmNi{sub 3}FeSi, +0.73 J/kg K at 15 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 6 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the metamagnetic-like transition temperature. Below the field induced transition temperature, SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) exhibits giant magnetic coercivity of 80 kOe at 20 K for SmNi{sub 3}MnSi, 87 kOe at 40 K for SmNi{sub 3}FeSi, 27 kOe at 20 K for SmNi{sub 3}CoSi and 54 kOe at 5 K for SmNi{sub 3}CuSi. - Graphical abstract: CaCu{sub 5}-type SmNi{sub 3}MnSi, SmNi{sub 3}FeSi, SmNi{sub 3}CoSi and SmNi{sub 3}CuSi show ferromagnetic ordering at 125 K, 190 K, 46 K and 12 K and field induced transitions at 65 K, 110 K, 30 K and 6 K, respectively. The magnetic entropy ΔS{sub m} reaches value of −1.1 J/kg K at 130 K for SmNi{sub 3}MnSi, −0.4 J/kg K at 180 K for SmNi{sub 3}FeSi, −0.37 J/kg K at 45 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 12 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the ferromagnetic ordering temperature. They show positive ΔS{sub m} of +2.4 J/kg K at 30 K for SmNi{sub 3}MnSi, −2.6 J/kg K at 65 K for SmNi{sub 3}FeSi, +0.73 J/kg K at 15 K for SmNi{sub 3}CoSi and −0.5 J/kg K at 6 K for SmNi{sub 3}CuSi in field change of 0–50 kOe around the metamagnetic-like transition temperature. Below the field induced transition temperature, SmNi{sub 3}TSi (T=Mn, Fe, Co, Cu) exhibits giant magnetic coercivity of 80 kOe at 20 K for SmNi{sub 3}MnSi, 87 kOe at 40 K for SmNi{sub 3}FeSi, 27 kOe at 20 K for SmNi{sub 3}CoSi and 54 kOe at 5 K for SmNi{sub 3}CuSi. - Highlights: • CaCu{sub 5}-type SmNi{sub 3}{Mn, Fe, Co, Cu}Si exhibit the Curie points at 12–190 K. • SmNi{sub 3}{Mn, Fe, Co, Cu}Si show field induced transition at 6–110 K. • SmNi{sub 3}MnSi shows huge magnetic hysteresis with coercive field of 80 kOe at 20 K. • SmNi{sub 3}FeSi shows huge magnetic hysteresis with coercive field of 87 kOe at 40 K. • SmNi{sub 3}CuSi shows giant coercive field of 54 kOe at 5 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and Electronic Properties of GaN/ZnO Solid Solution Nanowires

We have grown single-crystal (Ga{sub 1-x}Zn{sub x})(N{sub 1-x}O{sub x}) solid-solution nanowires using nanostructured ZnGa{sub 2}O{sub 4} precursor prepared by a sol-gel method. From electrical transport measurements in individual nanowire field-effect transistors, we have identified the conduction as n-type and obtained a background carrier density (-10{sup 19} cm{sup -3}) and an electron mobility (-1 cm{sup 2}/V s) that are consistent with chemical disorder and a large number of charge traps, as confirmed by the devices photocurrent response. From the dependence of the device photoresponse on incident light wavelength, we have determined the energy band gap of (Ga{sub 0.88}Zn{sub 0.12})(N{sub 0.88}O{sub 0.12}) to be as much as -0.6 eV lower than that of GaN or ZnO.

08 HYDROGEN↗

Thermal expansion of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and the solid solution series BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7} (0{<=}x{<=}2) studied by high-temperature X-ray diffraction and dilatometry

The thermal expansion behavior of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and BaZn{sub 2}Si{sub 2}O{sub 7} is characterized by both high-temperature X-ray diffraction (HT-XRD) and dilatometry. Ba{sub 2}ZnSi{sub 2}O{sub 7} and BaZnSiO{sub 4} show a thermal expansion (100-800 Degree-Sign C) in the range from 8.9 to 10.4 Multiplication-Sign 10{sup -6} K{sup -1}. By contrast, BaZn{sub 2}Si{sub 2}O{sub 7} has a much higher thermal expansion in the low-temperature modification and shows a phase transition at 280 Degree-Sign C which runs parallel with a steep increase in cell volume. This phase transition is also observed in the solid solution series BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7}, but it is shifted to higher temperatures and to a smaller volume change with increasing Mg{sup 2+} concentration. This solid solution series is characterized by dilatometry, X-ray diffraction and differential scanning calorimetry. An adjustment of the MgO/ZnO-ratio enables the preparation of materials with a large variety of thermal expansions. - Graphical abstract: XRD-patterns of Ba{sub 2}ZnSi{sub 2}O{sub 7} were recorded at different temperatures (left). For each XRD-pattern a Rietveld-refinement was performed, the image in the middle shows the XRD-pattern measured at room temperature (circles), the Rietveld calculation (red line) and the difference between them (blue line). The lattice parameters derived hereof were plottet against the temperature and fitted to a polynomial (right picture). From those polynomials the lattice expansion was calculated. Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of Ba{sub 2}ZnSi{sub 2}O{sub 7}, BaZnSiO{sub 4} and BaZn{sub 2-x}Mg{sub x}Si{sub 2}O{sub 7}. Black-Right-Pointing-Pointer Thermal expansions were determined by dilatometry and high-temperature X-ray diffraction. Black-Right-Pointing-Pointer High-temperature X-ray diffraction enabled to determine anisotropic thermal expansion. Black-Right-Pointing-Pointer BaZn{sub 2}Si{sub 2}O{sub 7} exhibits the highest thermal expansion due to a phase transition. Black-Right-Pointing-Pointer Substitution of small amounts of Zn{sup 2+} for Mg{sup 2+} leads to a decrease in thermal expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Phase Concentrated Solid-Solution Alloys: Bridging Intrinsic Transport Properties and Irradiation Resistance

Single-phase concentrated solid-solution alloys (SP-CSAs), including high entropy alloys (HEAs), are compositionally complex but structurally simple, and provide a playground of tailoring material properties through modifying their compositional complexity. The recent progress in understanding the compositional effects on the energy and mass transport properties in a series of face-centered-cubic SP-CSAs is the focus of this review. Relatively low electrical and thermal conductivities, as well as small separations between the interstitial and vacancy migration barriers have been generally observed, but largely depend on the alloying constituents. We further discuss the impact of such intrinsic transport properties on their irradiation response; the linkage to the delayed damage accumulation, slow defect aggregation, and suppressed irradiation induced swelling and segregation has been presented. We emphasize that the number of alloying elements may not be a critical factor on both transport properties and the defect behaviors under ion irradiations. Furthermore, the recent findings have stimulated novel concepts in the design of new radiation-tolerant materials, but further studies are demanded to enable predictive models that can quantitatively bridge the transport properties to the radiation damage.

36 MATERIALS SCIENCE↗

Nanostructured gadolinium-doped ceria microsphere synthesis from ion exchange resin: Multi-scale in-situ studies of solid solution formation

In the current nano-sized material revolution, the main limitations to a large-scale deployment of nanomaterials involve health concerns related to nano-dissemination via air. Developing new chemical routes benefiting from nano-size advantages while avoiding their hazards could overcome these limitations. Addressing this need, a chemical route leading to soft nano-particle agglomerates, i.e., macroscopic precursors presenting the ability to be decomposed into nano-sized materials, was developed and applied to Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ}. Using cerium/gadolinium-loaded ion exchange resin, the Ce{sub 0.8}Gd{sub 0.2}O{sub 2−δ} solid solution formation as a function of temperature was studied in-situ through X-ray diffraction, X-ray absorption spectroscopy and Raman spectroscopy. Temperatures corresponding to the organic skeleton decomposition and to the mixed oxide crystallization were identified. An optimal heat treatment, leading to nanostructured soft agglomerates, was established. Microsphere processing capabilities were evaluated and particle size distribution measurements were recorded. A very low fracture strength was calculated, and a nanometric particle size distribution (170 nm) was determined. - Graphical abstract: The elaboration of micro-spherical precursors leading to the formation of nano-oxide soft agglomerates was studied and approved through the use of ion exchange resin loaded with cerium and gadolinium. The formation of the solid solution was followed through in-situ measurements such as XAS, XRD, Raman, TGA and DSC. Key temperatures were identified for the formation of the mixed-oxide. Following this study, the microstructure and particle size of oxide microspheres formed highlight the formation of soft nano-arrangments. - Highlights: • Soft microspherical agglomerates able to be decomposed into nano-sized materials. • In situ study of cerium/gadolinium-loaded ion exchange resin conversion in oxide. • In situ multi-scale study through Raman spectroscopy, XAS and HT-XRD. • Monodisperse nanometric particle synthesis suitable for ceramic processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural phase transitions in the Ag{sub 2}Nb{sub 4}O{sub 11}-Na{sub 2}Nb{sub 4}O{sub 11} solid solution

The phase transitions between various structural modifications of the natrotantite-structured system xAg{sub 2}Nb{sub 4}O{sub 11}-(1-x)Na{sub 2}Nb{sub 4}O{sub 11} have been investigated and a phase diagram constructed as a function of temperature and composition. This shows three separate phase transition types: (1) paraelectric-ferroelectric, (2) rhombohedral-monoclinic and (3) a phase transition within the ferroelectric rhombohedral zone between space groups R3c and R3. The parent structure for the entire series has space group R3{sup Macron }c. Compositions with x>0.75 are rhombohedral at all temperatures whereas compositions with x<0.75 are all monoclinic at room temperature and below. At x=0.75, rhombohedral and monoclinic phases coexist with the phase boundary below room temperature being virtually temperature-independent. The ferroelectric phase boundary extends into the monoclinic phase field. No evidence was found for the R3-R3c phase boundary extending into the monoclinic phase field and it is concluded that a triple point is formed. - Graphical abstract: Phase diagram for xAg{sub 2}Nb{sub 4}O{sub 11}-(1-x)Na{sub 2}Nb{sub 4}O{sub 11} solid solution showing changes in crystal symmetry as a function of temperature and composition. The crystal structure is depicted. Highlights: Black-Right-Pointing-Triangle Ferroelectric, rhombohedral Ag{sub 2}Nb{sub 4}O{sub 11} in solid solution with monoclinic Na{sub 2}Nb{sub 4}O{sub 11}. Black-Right-Pointing-Triangle Three phase boundaries were studied as a function of composition and temperature. Black-Right-Pointing-Triangle Both rhombohedral and monoclinic variants exhibit ferroelectricity. The parent phase of the series has space group R3{sup Macron }c.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alpha self-irradiation effect on the local structure of the U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} solid solution

Uranium-americium mixed oxides are promising fuels for achieving an efficient Am recycling. Previous studies on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} materials showed that the high {alpha} activity of {sup 241}Am induces pellet swelling which is a major issue for cladding materials design. In this context, X-ray Diffraction and X-ray Absorption Spectroscopy measurements were used to study self-irradiation effects on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} local structure and to correlate these results with those obtained at the macroscopic scale. For a cumulative {alpha} decay dose equal to 0.28 dpa, it was shown that non-defective fluorite solid solutions were achieved and therefore, that the fluorite structure is stable for the studied doses. In addition, both interatomic distance and lattice parameter expansions were observed, which only partially explains the macroscopic swelling. As expected, an increase of the structural disorder with self-irradiation was also observed. - Graphical abstract: X-ray Diffraction and X-ray Absorption Spectroscopy measurements were performed on U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x}, exhibiting various cumulative {alpha} decay doses, in order to study self-irradiation effects on local structure and to correlate these results with those obtained at the macroscopic scale. Thus, it was shown that the fluorite structure is stable for the studied doses. In addition, both interatomic distance and lattice parameter expansions were observed, explaining partially the macroscopic swelling. Highlights: Black-Right-Pointing-Pointer Non-defective fluorite U{sub 0.85}Am{sub 0.15}O{sub 2{+-}x} solid solutions were achieved. Black-Right-Pointing-Pointer The fluorite structure is stable for the studied doses. Black-Right-Pointing-Pointer A lattice parameter increase was observed, which partially explains the macroscopic swelling. Black-Right-Pointing-Pointer The increase of the structural disorder can be understood from the ballistic effect associated to the Am high alpha activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Luminescence Properties of Eu{sup 3+}-Doped K{sub 1–} {sub x}Mg{sub 1–} {sub x}Sc(Lu){sub 1+} {sub x}(MoO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) Solid Solutions

K{sub 1–x}Mg{sub 1–} {sub x}Sc(Lu){sub 1+} {sub x}(MoO{sub 4}){sub 3} (0 ≤ x ≤ 0.5) solid solutions have been prepared by solid-state reactions. The synthesized phases of variable composition have been characterized by X-ray diffraction and differential thermal analysis, and their luminescence excitation and luminescence spectra have been obtained. We have measured their spectroscopic and luminescent characteristics (luminescence excitation spectra, short- and long-lived photoluminescence spectra, and long-lived emission lifetime).

36 MATERIALS SCIENCE↗

Atomistic calculations of the thermodynamic properties of mixing for tetravalent metal dioxide solid solutions: (Zr, Th, Ce)O{sub 2}

The thermodynamic mixing properties for isometric Th{sub x}Ce{sub 1-x}O{sub 2}, Ce{sub x}Zr{sub 1-x}O{sub 2}, and Th{sub x}Zr{sub 1-x}O{sub 2} were determined using quantum-mechanical calculations and subsequent Monte-Carlo simulations. Although the Th{sub x}Ce{sub 1-x}O{sub 2} binary indicates exsolution below 600 K, the energy gain due to exsolution is small (E{sub exsoln}=1.5 kJ/(mol cations) at 200 K). The energy gain for exsolution is significant for the binaries containing Zr; at 1000 K, E{sub exsoln}=6 kJ/(mol cations) for the Ce{sub x}Zr{sub 1-x}O{sub 2} binary, and E{sub exsoln}=17 kJ/(mol cations) for the Th{sub x}Zr{sub 1-x}O{sub 2} binary. The binaries containing Zr have limited miscibility and cation ordering (at 200 K for x=0.5). At 1673 K, only 4.0 and 0.25 mol% ZrO{sub 2} can be incorporated into CeO{sub 2} and ThO{sub 2}, respectively. Solid-solution calculations for the tetragonal Th{sub x}Zr{sub 1-x}O{sub 2} binary show decreased mixing enthalpy due to the increased end-member stability of tetragonal ZrO{sub 2}. Inclusion of the monoclinic ZrO{sub 2} is predicted to further reduce the mixing enthalpy for binaries containing Zr. - Graphical abstract: Temperature-composition phase diagram showing miscibility gaps for the isometric Th{sub x}Ce{sub 1-x}O{sub 2}, isometric Ce{sub x}Zr{sub 1-x}O{sub 2}, isometric Th{sub x}Zr{sub 1-x}O{sub 2}, and tetragonal Th{sub x}Zr{sub 1-x}O{sub 2} binaries at low composition (0<x<0.025), where the solid solidus is an average of the linear and Margules approximations for the incorporation limit (x{sub inc}), and the dotted solidus lines are the Margules approximation (above the average) and the linear approximation (below the average). Highlights: Black-Right-Pointing-Pointer {Delta}H{sub mix}, {Delta}G{sub mix}, and {Delta}S{sub mix} of Th{sub x}Ce{sub 1-x}O{sub 2}, Th{sub x}Zr{sub 1-x}O{sub 2}, and Ce{sub x}Zr{sub 1-x}O{sub 2} binaries are calculated. Black-Right-Pointing-Pointer Cation ordering is identified at low T for binaries containing ZrO{sub 2}. Black-Right-Pointing-Pointer Phase diagrams are estimated based on DFT and Monte-Carlo calculations. Black-Right-Pointing-Pointer DFT and Monte-Carlo calculations are in agreement with experimental (and previous computational) results, where available. Black-Right-Pointing-Pointer Increased thermodynamic stability of monoclinic and tetragonal ZrO{sub 2} end-member affects solid solution binaries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials design of perovskite solid solutions for thermochemical applications

Perovskites are excellent candidate materials as oxygen carriers in thermochemical processes. Due to their versatile composition, it is possible to fine-tune the perovskite's properties. Here, we present a method for the rational design of AMO 3– δ perovskite solid solutions with two different species on the Msite in order to tune their redox behavior. To account for the different ionic radii of different transition metal species M, two distinct ions are used in a solid solution on the A site, allowing tolerance-factor adjusted materials design. Using this methodology, we can create stable perovskites over a large range of different compositions. Leveraging the infrastructure of Materials Project, we calculate redox enthalpies for the reduction of over 240 of these $(\text {A}^{\prime}_x\text {A}^{\prime\prime}_{1-x})(\text {M}^{\prime}_y\text {M}^{\prime\prime}_{1-y})$O 3 perovskites to their brownmillerite phases based on density functional theory (DFT). We compare this data to experimentally measured data on thermodynamics of 24 of these materials to verify our theoretical framework. An empirical model is formulated for predicting the enthalpy and entropy changes as a function of the perovskites non-stoichiometry δ , which can be used to simulate the equilibrium composition as a function of temperature and oxygen partial pressure and to create a perovskite search engine based on an energetic analysis of the redox cycles. The data has been added as a contribution to MPContribs, which now includes publicly available user-controlled interactive graphs based on our theoretical and experimental data.

36 MATERIALS SCIENCE↗

A study of the process of decomposition of supersaturated GaAs:Fe solid solution by scanning probe microscopy

Using an atomic-force microscope, the decomposition of the supersaturated solid solution of iron-doped GaAs (GaAs:Fe) is studied. GaAs:Fe samples were obtained in the course of high-temperature diffusion of Fe into GaAs and subsequent annealing at a temperature by 200 deg. C below the doping temperature. The measurements are performed for transverse cleavages along the cleavage planes of the GaAs:Fe wafers. It is shown that, during annealing of the GaAs:Fe samples, the supersaturated alloy decomposes with the formation of particles of the second phase from {approx}50 nm to {approx}1 {mu}m in size. The particles of the second phase possess ferromagnetic properties at room temperature.

36 MATERIALS SCIENCE↗

Local structure and controllable thermal expansion in the solid solution (Mn 1-x Ni x )ZrF 6

It is an interesting but challenge issue to prepare isotropic controllable thermal expansion materials with a wide coefficient of thermal expansion (CTE) range. Herein we report controllable thermal expansion in the double ReO 3 -type (Mn 1-x Ni x )ZrF 6 solid solutions, whose CTE varies from -4.4 to +15.5 × 10 -6 K -1 (300–700 K). In particular, zero thermal expansion has been obtained in the composition of (Mn 0.6 Ni 0.4 )ZrF 6 . (Mn 1-x Ni x )ZrF 6 exhibits full solid solution character. The thermal expansion of (Mn 1-x Ni x )ZrF 6 is adjusted by the flexibility of the atomic linkages, which is confirmed by the technique of temperature-dependent high-energy synchrotron X-ray pair distribution function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗