Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar white”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

OPTEC: A Cubesat for Solar Cell Calibration

A new type of small spacecraft, the cubesat, has introduced a new concept for extremely small, low-cost missions into space. Cubesats are designed to be launched as secondary payloads on other missions, and are made up of unit elements (U) of size 10 cm by 10 cm by 10 cm, with a nominal mass of no more than 1.33 kg per U. We have designed a cubesat, OPTEC (Orbital Photovoltaic Testbed Cubesat) as a low-cost testbed to demonstrate, calibrate, and test solar cell technologies in space. Size of the cubesat is 2U (10x10x20cm, and the mass 2.66 kg. The cubesat deploys from the International Space Station into Low Earth Orbit at an altitude of about 420 km. Up to two 4x8cm test solar panels can be flown, with full I-V curves and temperature measurements taken.

OPTEC↗

Skylab and its solar astronomy experiments.

The functional characteristics of the Skylab are considered together with general information concerning the spacecraft and its equipment. The Skylab solar instruments are examined, giving attention to two H-alpha telescopes, a white light coronograph, X-ray spectrographic telescopes, a UV scanning polychromator/spectroheliometer, a dual X-ray telescope, an XUV spectrograph/spectroheliograph, and instruments of X-ray/UV solar photography. The Skylab solar observing programs are discussed along with aspects of astronaut training and details regarding the control and display devices of the spacecraft.

Schneider, W. C.↗

X-ray and gamma-ray observations of a white-light flare

Hard radiations (X-ray and gamma-ray) from a major solar flare observed by HEAO-1 on July 11, 1978, are discussed. It is noted that the observations showed gamma-ray line and continuum emission extending to the highest energy observed. The lines are identified with the 2.2 MeV line of deuterium formation and the 4.4 MeV line of inelastic scattering on C-12, both of which were previously observed in the flares of August 1972. The flare of July 11 is identified as a white-light flare. It therefore provides the first opportunity for a detailed examination of white-light flare theories that depend on proton heating of the photosphere. The line strength over a four-minute integration at 2.2 MeV is found to be 1.00 + or - 0.29 ph/sq cm-sec; the gamma-ray emission (excluding the 2.2 MeV line which was appreciably delayed) lagged by less than 20 sec approximately after the hard X-ray and microwave fluxes. It is concluded that the 'second-stage' acceleration of high-energy solar particles must commence promptly after the impulsive phase.

Hudson, H. S.↗

Enhancing PV Inverter Reliability Through Predictive Maintenance: Insights from Retrofitting of PV Inverters

Photovoltaic (PV) systems represent a cornerstone in the global shift toward sustainable energy generation, with inverters serving as the crucial link between solar panels and the grid. Despite their pivotal role, inverters are susceptible to failures, contributing significantly to maintenance events and operational disruptions in large-scale PV plants. This white paper investigates the importance and methodologies of predictive maintenance strategies that monitor the component-level pre-failure signatures on PV inverters. Through a comprehensive survey of literature and industry professionals, insights on preventive maintenance and retrofitting practices have been gathered. The expert elicitation helps shed light on common challenges and opportunities for improving PV system reliability, particularly inverter reliability. By addressing these challenges, the white paper aims to enhance the long-term viability and effectiveness of solar PV plants in the renewable energy landscape, contributing to the global transition toward environmentally friendly energy generation.

14 SOLAR ENERGY↗

BD-22deg3467, a DAO-type Star Exciting the Nebula Abell 35

Spectral analyses of hot, compact stars with non-local thermodynamical equilibrium (NLTE) model-atmosphere techniques allow the precise determination of photospheric parameters such as the effective temperature (T(sub eff)), the surface gravity (log g), and the chemical composition. The derived photospheric metal abundances are crucial constraints for stellar evolutionary theory. Aims. Previous spectral analyses of the exciting star of the nebula A35, BD-22deg3467, were based on He+C+N+O+Si+Fe models only. For our analysis, we use state-of-the-art fully metal-line blanketed NLTE model atmospheres that consider opacities of 23 elements from hydrogen to nickel. We aim to identify all observed lines in the ultraviolet (UV) spectrum of BD-22deg3467 and to determine the abundances of the respective species precisely. Methods. For the analysis of high-resolution and high signal-to-noise ratio (S/N) far-ultraviolet (FUSE) and UV (HST/STIS) observations, we combined stellar-atmosphere models and interstellar line-absorption models to fully reproduce the entire observed UV spectrum. Results. The best agreement with the UV observation of BD-22deg3467 is achieved at T(sub eff) = 80 +/- 10 kK and log g = 7.2 +/- 0.3. While T(sub eff) of previous analyses is verified, log g is significantly lower. We re-analyzed lines of silicon and iron (1/100 and about solar abundances, respectively) and for the first time in this star identified argon, chromium, manganese, cobalt, and nickel and determined abundances of 12, 70, 35, 150, and 5 times solar, respectively. Our results partially agree with predictions of diffusion models for DA-type white dwarfs. A combination of photospheric and interstellar line-absorption models reproduces more than 90% of the observed absorption features. The stellar mass is M approx. 0.48 Solar Mass. Conclusions. BD.22.3467 may not have been massive enough to ascend the asymptotic giant branch and may have evolved directly from the extended horizontal branch to the white dwarf state. This would explain why it is not surrounded by a planetary nebula. However, the star, ionizes the ambient interstellar matter, mimicking a planetary nebula.

Ziegler, M.↗

Development of improved higher-order correction for the NIF opacity spectrometer

X-ray opacity measurements on the National Ignition Facility (NIF) are in the process of reproducing earlier measurements from the Sandia Z Facility, in particular for oxygen and iron plasmas. These measurements have the potential to revise our understanding of the “solar problem” and of the hot degenerate Q class white dwarf structure by probing plasma conditions near the base of their convection zones. Accurate opacity measurements using soft x-ray Bragg crystal spectrometers require correction for higher-order diffraction effects. Extending prior work in this area [Dutra et al., Review of Scientific Instruments 93, 113527 (2022)], we have developed a new method to remove higher-order spectral components from NIF opacity spectrometer data. Furthermore, by modeling absorption and backlighting continuum spectra and subtracting the second- and third-order components from the measured data, we are able to perform this correction while avoiding imprinting first-order model line features onto the data.

79 ASTRONOMY AND ASTROPHYSICS↗

Feasibility study of the solar scientific instruments for Spacelab/Orbiter

The feasibility and economics of mounting and operating a set of solar scientific instruments in the backup Skylab Apollo Telescope Mount (ATM) hardware was evaluated. The instruments used as the study test payload and integrated into the ATM were: the Solar EUV Telescope/Spectrometer; the Solar Active Region Observing Telescope; and the Lyman Alpha White Light Coronagraph. The backup ATM hardware consists of a central cruciform structure, called the "SPAR', a "Sun End Canister' and a "Multiple Docking Adapter End Canister'. Basically, the ATM hardware and software provides a structural interface for the instruments; a closely controlled thermal environment; and a very accurate attitude and pointing control capability. The hardware is an identical set to the hardware that flow on Skylab.

Leritz, J.↗

Radio observations of solar and stellar coronae

Recent results of radio observations of the solar and stellar coronae are reviewed. Attention is given to the results obtained on quiet-sun fine structures; the active region observations, with particular consideration given to the soft X-ray and radio comparisons of observations made during the Coronal Magnetic Structures Observing Campaign and the strength of the magnetic fields in the corona; the radio observations of solar flares; and the radio observations of stellar coronae of the RS Canum Venaticorum binaries, M dwarf stars, pre-main-sequence stars, and chemically-peculiar B stars. Also discussed are current issues in stellar radiophysics and perspectives in solar radio physics.

Kundu, M. R.↗

Flux emergence and umbra formation after the X-9 flare of 1991 March 22

Vector magnetograms, H-alpha, D3, and white-light filtergrams were obtained at the Big Bear Solar Observatory immediately after the X-9 flare on March 22, 1991. These observations show that the umbral area increased by 2 x 10 exp 7 sq km, together with a magnetic flux increase of 2 x 10 exp 20 Mx. The magnetic shear increased by 40 deg along the neutral line. It is indicated, by the study of the evolution of spot and magnetic structure of the March 22, 1991 region, that a pair of new umbrae emerged suddenly on either side of the neutral line coinciding with the shear increase immediately after the flare.

Wang, Haimin↗

Ground Level Enhancement in the 2014 January 6 Solar Energetic Particle Event

We present a study of the 2014 January 6 solar energetic particle event which produced a small ground level enhancement (GLE), making it the second GLE of this unusual solar cycle 24. This event was primarily observed by the South Pole neutron monitors (increase of approximately 2.5 percent) while a few other neutron monitors recorded smaller increases. The associated coronal mass ejection (CME) originated behind the western limb and had a speed of 1960 kilometers per second. The height of the CME at the start of the associated metric type II radio burst, which indicates the formation of a strong shock, was measured to be 1.61 solar radii using a direct image from STEREO-A/EUVI. The CME height at the time of the GLE particle release (determined using the South Pole neutron monitor data) was directly measured as 2.96 solar radii based on STEREO-A/COR1 white-light observations. These CME heights are consistent with those obtained for GLE71, the only other GLE of the current cycle, as well as cycle-23 GLEs derived using back-extrapolation. GLE72 is of special interest because it is one of only two GLEs of cycle 24, one of two behind-the-limb GLEs, and one of the two smallest GLEs of cycles 23 and 24.

ground level enhancement↗

Kink Oscillation of a Flux Rope During a Failed Solar Eruption

We report a decaying kink oscillation of a flux rope during a confined eruptive flare, observed off the solar limb by SDO/AIA, that lacked a detectable white-light coronal mass ejection. The erupting flux rope underwent kinking, rotation, and apparent leg–leg interaction during the event. The oscillations were observed simultaneously in multiple AIA channels at 304, 171, and 193 Å, indicating that multithermal plasma was entrained in the rope. After reaching the overlying loops in the active region, the flux rope exhibited large-amplitude, decaying kink oscillations with an apparent initial amplitude of 30 Mm, period of about 16 min, and decay time of about 17 min. We interpret these oscillations as a fundamental standing kink mode of the flux rope. The oscillation polarization has a clear vertical component, while the departure of the detected waveform from a sinusoidal signal suggests that the oscillation could be circularly or elliptically polarized. The estimated kink speed is 1080 km s−1, corresponding to an Alfv'en speed of about 760 km s−1. This speed, together with the estimated electron density in the rope from our DEM analysis, ne ≈ (1.5–2.0) ×109 cm−3, yields a magnetic field strength of about 15 G. To the best of our knowledge, decaying kink oscillations of a flux rope with non-horizontal polarization during a confined eruptive flare have not been reported before. These oscillations provide unique opportunities for indirect measurements of the magnetic-field strength in low-coronal flux ropes during failed eruptions.

Pankaj Kumar↗

The 2011 Outburst of Recurrent Nova T Pyx: X-Ray Observations Expose the White Dwarf Mass and Ejection Dynamics

The recurrent nova T Pyx underwent its sixth historical outburst in 2011, and became the subject of an intensive multi-wavelength observational campaign.We analyze data from the Swift and Suzaku satellites to produce a detailed X-ray light curve augmented by epochs of spectral information. X-ray observations yield mostly non-detections in the first four months of outburst, but both a super-soft and hard X-ray component rise rapidly after Day 115. The super-soft X-ray component, attributable to the photosphere of the nuclear-burning white dwarf, is relatively cool (approximately 45 electron volts) and implies that the white dwarf in T Pyx is significantly below the Chandrasekhar mass (approximately 1 M). The late turn-on time of the super-soft component yields a large nova ejecta mass (approximately greater than 10(exp −5) solar mass), consistent with estimates at other wavelengths. The hard X-ray component is well fit by a approximately 1 kiloelectron volt thermal plasma, and is attributed to shocks internal to the 2011 nova ejecta. The presence of a strong oxygen line in this thermal plasma on Day 194 requires a significantly super-solar abundance of oxygen and implies that the ejecta are polluted by white dwarf material. The X-ray light curve can be explained by a dual-phase ejection, with a significant delay between the first and second ejection phases, and the second ejection finally released two months after outburst. A delayed ejection is consistent with optical and radio observations of T Pyx, but the physical mechanism producing such a delay remains a mystery.

nova T Pyx↗

Forerunners - Outer rims of solar coronal transients

The large loop or blob-like transient events viewed in the white-light corona are rimmed by broad regions where the density is slightly enhanced above the pretransient corona. Every one of the Skylab events studied for which sufficiently good Skylab coronagraph coverage is available shows this effect. The upper boundaries of these 'forerunners' blend gradually into the background corona 1-2 solar radii above the transient's leading edges. In any single event, the coronal mass enhancement represented by the forerunner comprises up to 25% of the total excess mass present in the coronagraph's field of view and includes a much larger volume of the corona than previously attributed to the underlying transient. A forerunner without an accompanying transient has not yet been seen. Clearly, forerunners must be reckoned with in any proposed models of discrete outward coronal mass motions, because they indicate the presence of disturbed corona far ahead of the denser portions of the event.

Jackson, B. V.↗

Overview of the CDAW Events

In this paper, I present an overview of the solar and interplanetary characteristics of the events selected to be analyzed during the workshop. The events were selected based on the following criteria: 1. The events must be well observed in the interplanetary medium as shock-driving interplanetary coronal mass ejections (ICMEs), 2. The ICMEs should have corresponding CMEs near the Sun, observed in white-light coronal images, and 3. The heliographic coordinates of the solar sources must be within 15 degrees from the Sun Center. This presentation will set the stage for the rest of the discussion during the workshop

Gopalswamy, Nat↗

Modeling a simple coronal streamer during whole sun month

The solar minimum streamer structure observed during the whole sun month was modeled. The Van de Hulst inversion was used in order to determine the coronal electron density profiles and scale-height temperature profiles. The axisymmetric magnetostatic model of Gibson, Bagenal and Low was also used. The density, temperature, and magnetic field distribution were quantified using both coronal white light data and photospheric magnetic field data from the Wilcox Solar Observatory. The densities and temperatures obtained by the Van de Hulst and magnetostatic models are compared to the magnetic field predicted by the magnetostatic model to a potential field extrapolated from the photosphere.

Gibson, S. E.↗

Thermodynamics of the Solar Corona and Evolution of the Solar Magnetic Field as Inferred from the Total Solar Eclipse Observations of 11 July 2010

We report on multi-wavelength observations of the corona taken simultaneously in broadband white light, and in seven spectral lines, H-alpha 656.3 nm, Fe IX 435.9 nm, Fe X 637.4 nm, Fe XI 789.2 nm, Fe XIII 1074.7 nm, Fe XIV 530.3 nm and Ni XV 670.2 nm. The observations were made during the total solar eclipse of 11 July 2010 from the atoll of Tatakoto in French Polynesia. Simultaneous imaging with narrow bandpass filters in each of these spectral lines and in their corresponding underlying continua maximized the observing time during less than ideal observing conditions and yielded outstanding quality data. The application of two complementary image processing techniques revealed the finest details of coronal structures at 1" resolution in white light, and 6.5" in each of the spectral lines. This comprehensive wavelength coverage confirmed earlier eclipse findings that the solar corona has a clear two-temperature structure: The open field lines, expanding outwards from the solar surface, are characterized by electron temperatures near 1 X 10(exp 6) K, while the hottest plasma around 2X 10(exp 6) K resides in loop-like structures forming the bulges of streamers. The first images of the corona in the forbidden lines of Fe IX and Ni XV, showed that there was very little coronal plasma at temperatures below 5 X 10(exp 5) K and above 2.5X 10(exp 6) K. The data also enabled temperature differentiations as low as 0:2 X 10(exp 6) K in different density structures. These observations showed how the passage of CMEs through the corona, prior to totality, produced large scale ripples and very sharp streaks, which could be identified with distinct temperatures for the first time. The ripples were most prominent in emission from spectral lines associated with temperatures around 10(exp 6) K. The most prominent streak was associated with a conical-shaped void in the emission from the coolest line of Fe IX and from the hottest line of Ni XV. A prominence, which erupted prior to totality, appeared in the shape of a hook in the cooler lines of Fe X and Fe XI, spanning 0.5 R(solar) in extent starting at a heliocentric distance of 1.3 R(solar), with a complex trail of hot and cool twisted structures connecting it to the solar surface. Simultaneous Fe X 17.4 nm observations from space by Proba2/SWAP provided an ideal opportunity for comparing emission from a coronal forbidden line, namely Fe X 637.4 nm, with a space-based EUV allowed line. Comparison of the Fe X 17.4 nm and 637.4 nm emission provided the first textbook example of the role of radiative excitation in extending the detectability of coronal emission to much larger heliocentric distances than its collisionally excited component. These eclipse observations demonstrate the unique capabilities of coronal forbidden lines for exploring the evolution of the coronal magnetic field in the heliocentric distance range of 1 - 3 R(solar), which is currently inaccessible to any space-borne or ground-based observatory.

Habbal, Shadia Rifai↗

106 Co-Signatories of the Planetary Science and Astrobiology Decadal Survey 2023-2032 White Paper

The field of exoplanetary science has emerged over the past two decades, rising up alongside traditional solar system planetary science. Both fields focus on understanding the processes which form and sculpt planets through time, yet there has been less scientific exchange between the two communities than is ideal. I will report on our white paper which explores some of the institutional and cultural barriers impeding cross-discipline collaborations. Our suggestions for fostering greater collaboration between the disciplines will be described. Some solutions require structural or policy changes within NASA itself, while others are directed towards other institutions, including academic publishers, that can also facilitate greater interdisciplinarity.

M. Marley↗