Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Energy balance in the solar transition region. III - Helium emission in hydrostatic, constant-abundance models with diffusion

In our previous papers we described the mathematical formalism and the computed results for energy-balance hydrostatic models of the solar transition region. In this paper we discuss in some detail the limitations of the hydrostatic and one-dimensional assumptions used. Then we analyze the determination of helium emission when diffusion is included. We use transport coefficients estimated from kinetic theory to determine the helium departures from local ionization balance. We calculate the helium spectra for each of our models and evaluate the role of helium in the energy transport. Also, we investigate the effects of coronal illumination on the structure of the transition region and upper chromosphere, and show how coronal illumination affects various EUV lines and the He I 10830 A line. Comparing with both absolute intensities and detailed line profiles, we show that our models are consistent not only with the observed hydrogen spectra but also with the available helium spectra.

Fontenla, J. M.↗
NASA NTRS1980

Cosmological variation of G and the solar luminosity

Teller's analysis of the effects of a varying gravitational constant G on the past solar luminosity is reexamined. It is shown that if Newtonian gravitation is viewed as a nonrelativistic limit of Einstein's theory, there exists (1) a constraint between G and the total mass M of the sun and (2) a change in the radiative energy density-temperature relation, which were not included in Teller's analysis and which change his result from L is about G to the 7th power (found to be unacceptable) to L is about constant, independently of how G might vary with time.

Canuto, V.↗
NASA NTRS2004

Solar Cell Calibration and Measurement Techniques

The increasing complexity of space solar cells and the increasing international markets for both cells and arrays has resulted in workshops jointly sponsored by NASDA, ESA and NASA. These workshops are designed to obtain international agreement on standardized values for the AMO spectrum and constant, recommend laboratory measurement practices and establish a set of protocols for international comparison of laboratory measurements. A working draft of an ISO standard, WD15387, "Requirements for Measurement and Calibration Procedures for Space Solar Cells" was discussed with a focus on the scope of the document, a definition of primary standard cell, and required error analysis for all measurement techniques. Working groups addressed the issues of Air Mass Zero (AMO) solar constant and spectrum, laboratory measurement techniques, and te international round robin methodology. A summary is presented of the current state of each area and the formulation of the ISO document.

Bailey, Sheila↗
NASA NTRS1997

Solar Cell Calibration and Measurement Techniques

The increasing complexity of space solar cells and the increasing international markets for both cells and arrays has resulted in workshops jointly sponsored by NASDA, ESA and NASA. These workshops are designed to obtain international agreement on standardized values for the AMO spectrum and constant, recommend laboratory measurement practices and establish a set of protocols for international comparison of laboratory measurements. A working draft of an ISO standard, WDI 5387, 'Requirements for Measurement and Calibration Procedures for Space Solar Cells' was discussed with a focus on the scope of the document, a definition of primary standard cell, and required error analysis for all measurement techniques. Working groups addressed the issues of Air Mass Zero (AMO) solar constant and spectrum, laboratory measurement techniques, and the international round robin methodology. A summary is presented of the current state of each area and the formulation of the ISO document.

Bailey, Sheila↗
NASA NTRS1980

Rare gases in the past and present solar wind

The elemental abundances, fluxes and isotopic compositions of rare gases in the past and present-day solar wind are discussed on the basis of direct measurements and fossil evidence in lunar and meteorite samples. Spacecraft measurements of the abundances of He, O, Si, Fe, Ne, and Ar with respect to H in the solar wind are shown to agree with relative abundance measurements of these elements in the solar photosphere and corona, while the lack of evidence of systematic depletion with increasing ionic mass suggests solar abundances of the much less abundant Kr and Xe in the solar wind. Relative He, Ne and Ar abundances in the ancient solar wind as derived from lunar ilmenite and the Pesyanoe meteorite are similar to present-day values, except for a factor of two underabundance of He, while the heavy rare gases appear to be enriched by up to a factor of five. The isotopic compositions of solar wind Ar, Kr and Xe have apparently been fairly constant over most of the solar lifetime, whereas He and possibly Ne show evidence of an increasing abundance of their heavy isotopes with increasing solar wind age.

Pepin, R. O.↗
NASA NTRS1985

Diurnal variation of galactic cosmic ray intensity on quiet days

A detailed study of the diurnal variation on long term basis was performed on geomagnetically quiet days using the experimental data of the cosmic ray intensity from the worldwide neutron monitoring stations. During the period when the polarity of the solar magnetic field in the Northern Hemisphere of the sun is negative the phase and amplitude of the diurnal anisotropy on quiet days was observed to remain almost constant. When the polarity of solar magnetic field in the Northern Hemisphere changes from negative to positive, a shift in the phase of the diurnal anisotropy on quiet days towards earlier hours is observed and the shift is found to be maximum during minimum solar activity periods 1953-54 and 1975-76. When the polarity of solar magnetic field changes from positive to negative in the Northern Hemisphere of the Sun the phase of the diurnal anisotropy on quiet days recovers to its usual direction of corotational anisotropy and is observed to remain almost constant till the polarity of the solar magnetic field does not change.

Kumar, S.↗
NASA NTRS2011

The Character of the Solar Wind, Surface Interactions, and Water

We discuss the key characteristics of the proton-rich solar wind and describe how it may interact with the lunar surface. We suggest that solar wind can be both a source and loss of water/OH related volatiles, and review models showing both possibilities. Energy from the Sun in the form of radiation and solar wind plasma are in constant interaction with the lunar surface. As such, there is a solar-lunar energy connection, where solar energy and matter are continually bombarding the lunar surface, acting at the largest scale to erode the surface at 0.2 Angstroms per year via ion sputtering [1]. Figure 1 illustrates this dynamically Sun-Moon system.

Farrell, William M.↗
NASA NTRS1976

The Redox flow system for solar photovoltaic energy storage

A new method of storage was applied to a solar photovoltaic system. The storage method is a redox flow system which utilizes the oxidation-reduction capability of two soluble electrochemical redox couples for its storage capacity. The particular variant described separates the charging and discharging function of the system such that the electrochemical couples are simultaneously charged and discharged in separate parts of the system. The solar array had 12 solar cells; wired in order to give a range of voltages and currents. The system stored the solar energy so that a load could be run continually day and night. The main advantages of the redox system are that it can accept a charge in the low voltage range and produce a relatively constant output regardless of solar activity.

Odonnell, P.↗
NASA NTRS1976

The Redox Flow System for solar photovoltaic energy storage

The interfacing of a Solar Photovoltaic System and a Redox Flow System for storage was workable. The Redox Flow System, which utilizes the oxidation-reduction capability of two redox couples, in this case iron and titanium, for its storage capacity, gave a relatively constant output regardless of solar activity so that a load could be run continually day and night utilizing the sun's energy. One portion of the system was connected to a bank of solar cells to electrochemically charge the solutions, while a separate part of the system was used to electrochemically discharge the stored energy.

Odonnell, P.↗
NASA NTRS1971

Optimum solar electric interplanetary mission opportunities from 1975 to 1990

A collection of optimum trajectory and spacecraft data is presented for unmanned interplanetary missions from 1975 to 1990 using solar electric propulsion. Data are presented for one-way flyby and orbiter missions from Earth to Venus, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto. The solar system model assumes planetary ephemerides which very closely approximate the true motion of the planets. Direct and indirect flight profiles are investigated. Data are presented for two representative flight times for each mission. The launch vehicle is the Titan 3 B (core)/Centaur, and a constant jet exhaust speed solar electric propulsion system having a specific mass of 30 kg/kw is completely optimized in terms of power level and jet exhaust speed to yield maximum net spacecraft mass. The hyperbolic excess speeds at departure and arrival and the launch date are optimized for each mission. For orbiter missions, a chemical retro stage is used to brake the spacecraft into a highly eccentric capture orbit about the target planet.

Mann, F. I.↗
NASA NTRS1977

Simple analytical solutions for spherically symmetric production and modulation of energetic solar particles

Exact analytical solutions are presented for the standard time-independent spherically symmetric convection-diffusion-adiabatic deceleration equation governing the transport of cosmic rays in the interplanetary medium for the case in which particles are produced with spherical symmetry at the sun. It is assumed that the solar-wind speed is constant and radial, and that the spatial diffusion coefficient has a power-law dependence on momentum. The Green's function describing the modulation of a monoenergetic production of particles is presented. The solutions provide a useful basis for the study of time-integrated properties of energetic solar-flare particle spectra.

Gross, M. W.↗
NASA NTRS1978

Evidence for a constant speed of shock propagation between 0.8 AU and 2.2 AU

The results of preliminary analysis of the in situ observations of solar wind plasma and interplanetary magnetic field data are presented. It is indicated that two planetary shocks associated with the August 1972 solar events propagated at approximately constant speed between 0.8 AU and 2.2 AU. This result is contrary to some theoretical expectations and earlier reports for these events of a strong deceleration of these shocks with increasing heliocentric distance. One example given is the difference between observed shock speeds of 700 km/sec and the estimated speeds of 2200 km/sec for Pioneer 9 and 1000 km/sec for Pioneer 10. These higher average speeds associated with the propagation of the shocks from the sun to the spacecraft, therefore, imply an extremely strong deceleration closer to the sun (within 0.8 AU).

Intriligator, D. S.↗
NASA NTRS1980

Indoor tests of the concentric-tube solar collector

Report describes performance tests on 12-tube, liquid-filled collector. Thermal efficiency, change in efficiency with sun position, and time constant for temperature drop after solar flux is cut are described.

Source record↗
NASA NTRS2013

An SDO/AIA-Observed Filament Eruption Triggered by a Lid-Removal Onset Mechanism

An eruption of a solar filament often presages the onset of a more general solar eruption, often leading to a solar flare and coronal mass ejection (CME). Among the mechanisms suggested for triggering eruptions are flux cancellation, flux emergence, tether‐cutting reconnection, and breakout reconnection. Here we present an example of a filament eruption due to a different trigger mechanism, which we call ``lid removal,'' whereby a magnetic structure overlying the filament is removed by a preceding adjacent eruption, rendering MHD unstable the magnetic system containing the filament and resulting in the subsequent eruption of the filament. This filament eruption occurred on 23 Jan 2013, and was well‐seen in SDO/AIA 193 Ang images. Prior to its eruption the filament was at an approximately constant height above the solar surface for approx. 4 hours, before smoothly lifting off. Evidence for the overlying "lid'' field was difficult to discern in 193 Ang images, but was apparent in hotter coronal images, such as SDO/AIA 335. Removal of the lid field was due to an eruption of that field visible in the hotter‐corona images. In this way, the lid‐removal filament‐eruption mechanism is similar to recent observations of connected or cascading eruptions originating from magnetically‐linked locations.

Sterling, Alphonse C.↗
NASA NTRS2013

An SDO/AIA-Observed Filament Eruption Triggered by a Lid-Removal Onset Mechanism

An eruption of a solar filament often presages the onset of a more general solar eruption, often leading to a solar flare and coronal mass ejection (CME). Among the mechanisms suggested for triggering eruptions are flux cancellation, flux emergence, tether-cutting reconnection, and breakout reconnection. Here we present an example of a filament eruption due to a different trigger mechanism, which we call "lid removal,'' whereby a magnetic structure overlying the filament is removed by a preceding adjacent eruption, rendering MHD unstable the magnetic system containing the filament and resulting in the subsequent eruption of the filament. This filament eruption occurred on 23 Jan 2013, and was well-seen in SDO/AIA 193 Ang images. Prior to its eruption the filament was at an approximately constant height above the solar surface for approx 4 hours, before smoothly lifting off. Evidence for the overlying "lid'' field was difficult to discern in 193 Ang images, but was apparent in hotter coronal images, such as SDO/AIA 335. Removal of the lid field was due to an eruption of that field visible in the hotter‐corona images. In this way, the lid‐removal filament‐eruption mechanism is similar to recent observations of connected or cascading eruptions originating from magnetically‐linked locations.

Sterling, Alphonse C.↗
NASA NTRS1977

Noncompressive density enhancements in the solar wind

When the bulk flow speed is nearly constant or falling, high densities are sometimes observed in the solar wind. These densities do not appear to be generated in interplanetary space. It is noted that the magnetic field is not enhanced within these events, and that the proton and/or electron temperatures are low, varying in opposition to the density. About 1/3 of these density events contains interplanetary magnetic field reversals, some of which are noisy and do not qualify as sector boundaries. It is estimated that the average event contains approximately 10 to the 16th g of material and 2.6 x 10 to the 31st ergs, so that aggregated events, when they are common, make a negligible contribution to the total mass and energy budget of the solar wind at 1 AU. It is suggested that there may be an association between density enhancements and solar coronal mass ejection events.

Gosling, J. T.↗