Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “single atom catalysts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tailoring the d-band center on Ru 1 Cu single-atom alloy nanotubes for boosting electrochemical non-enzymatic glucose sensing

The development of cost-effective and highly efficient electrocatalysts is critical to help electrochemical non-enzymatic sensors achieve high performance. Here, in this work, a new class of catalyst, Ru single atoms confined on Cu nanotubes as a single-atom alloy (Ru 1 Cu NTs), with a unique electronic structure and property, was developed to construct a novel electrochemical non-enzymatic glucose sensor for the first time. The Ru 1 Cu NTs with a diameter of about 24.0 nm showed a much lower oxidation potential (0.38 V) and 9.0-fold higher response (66.5 μA) current than Cu nanowires (Cu NWs, oxidation potential 0.47 V and current 7.4 μA) for glucose electrocatalysis. Moreover, as an electrochemical non-enzymatic glucose sensor, Ru1Cu NTs not only exhibited twofold higher sensitivity (54.9 μA mM −1 cm −2 ) and wider linear range (0.5–8 mM) than Cu NWs, but also showed a low detection limit (5.0 μM), excellent selectivity, and great stability. According to theoretical calculation results, the outstanding catalytic and sensing performance of Ru 1 Cu NTs could be ascribed to the upshift of the d-band center that helped promote glucose adsorption. This work presents a new avenue for developing highly active catalysts for electrochemical non-enzymatic sensors.

electrochemistry↗
DOE OSTI2023

Reconstructing Oxygen-Deficient Zirconia with Ruthenium Catalyst on Atomic-Scale Interfaces toward Hydrogen Production

Downsizing a catalyst nanoparticle (NP) to a single atom (SA) has proven to be highly effective in increasing catalytic activity and decreasing the amount of catalyst required for various electrochemical reactions. However, insufficient stability of the single-atom site catalysts (SACs) is still a significant challenge for their practical application. Here, SACs firmly bound to stable metal oxide NPs are proposed to dramatically increase the electrochemical activity and stability of SA-based catalysts for hydrogen evolution reaction (HER). Starting from a Ru-infiltrated, Zr-based metal-organic framework (MOF), the tetragonal zirconium oxide (ZrO 2-x ) NPs-embedded carbon matrix is fabricated as support through facile pyrolysis. Simultaneously, Ru SAs as active sites are well dispersed on the surface of ZrO 2-x NPs due to the generation of oxygen vacancies in the tetragonal ZrO 2-x . Finally, the Ru-ZrO 2-x SAC exhibits a 4–5 times higher mass activity than commercial Pt and Ru catalysts and superior durability due to strong metal-support interaction (SMSI) between Ru atoms and ZrO 2-x substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tuning Ligand–Coordinated Single Metal Atoms on TiO 2 and their Dynamic Response during Hydrogenation Catalysis

Ligand-coordinated supported catalysts (LCSCs) are of growing interest for heterogeneous single-atom catalysis. Here, the effect of the choice of organic ligand on the activity and stability of TiO 2 -supported single-atom Pt-ligand catalysts was investigated for ethylene hydrogenation. The activity of these catalysts showed a significant dependence on the choice of ligand and also correlated with coordination number for Pt-ligand and Pt-Cl - . Of the three ligands examined in this study, the one with the lowest Pt coordination number, 1,10-phenanthroline-5,6-dione (PDO), showed the lowest reaction temperature and highest reaction rate, likely due to those metal sites being more accessible to reactant adsorption. In-situ X-ray absorption spectroscopy (XAS) experiments showed that the activity also correlated with good heterolytic dissociation of hydrogen, which was supported by OH/OD exchange experiments and was the rate-determining step of the hydrogenation reaction. In these in-situ XAS experiments up to 190 degrees C, the supported Pt-ligand catalyst showed excellent stability against structural and chemical change. Instead of Pt, the PDO ligand could be coordinated with Ir on TiO 2 to form Ir LCSCs that showed slow activation by loss of Ir-Cl bonds, then excellent stability in the hydrogenation of ethylene. Furthermore, these results provide the chance to engineer ligand-coordinated supported catalysts at the single-atom catalyst level by the choice of ligand and enable new applications at relatively high temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Controlling Reaction Pathways of Ethylene Hydroformylation Using Isolated Bimetallic Rhodium–Cobalt Sites

Designing efficient ligand-free heterogeneous catalysts for ethylene hydroformylation to produce C 3 oxygenates is of importance for both fundamental research and practical applications, but it is often hindered by insufficient catalytic activity and selectivity. Here, this work designs isolated rhodium–cobalt (Rh–Co) sites confined within a ZSM-5 zeolite to enhance ethylene hydroformylation rates and selectivity while maintaining catalyst stability. By adjusting the Co/Al ratio in Co-ZSM-5, different sizes of Co are formed; subsequent Rh introduction produces isolated Rh 1 Co x clusters with different Rh–Co coordination numbers (CNs). In-situ characterizations and density functional theory calculations reveal that a Rh–Co CN of 3, corresponding to an isolated Rh 1 Co 3 site, provides optimal bindings to reaction intermediates and thus achieves the highest hydroformylation rates among supported Rh-based catalysts. This study demonstrates the role of coordination-tuning via a secondary metal in effectively controlling the reaction pathway over single Rh atom catalysts.

03 NATURAL GAS↗
DOE OSTI2025

Discovering Ni/Cu Single-Atom Alloy as a Highly Active and Selective Catalyst for Direct Methane Conversion to Ethylene: A First-Principles Kinetic Study

Direct methane conversion to liquid fuels or value-added chemicals is a promising technology to utilize natural resources without resorting to further petroleum extraction. However, discovering efficient catalysts for this reaction is challenging due to either coke formation or unfavorable C-H bond activation. Herein, we design single-atom alloy (SAA) catalysts to simultaneously eliminate the above two bottlenecks based on mechanism-guided strategies: (1) the active single atom enables favorable C-H bond breaking and (2) the less reactive host metal facilitates C-C coupling and thus avoids strong binding of carbonaceous species. Employing electronic structure theory calculations, we screened the stability of multiple SAAs with 3d-5d transition metals atomically dispersed on a copper surface in terms of avoiding dopant aggregation and segregation. We then evaluated reactivities of the stable SAAs as catalysts for direct methane conversion to C2 products, including methane dehydrogenation and C-C coupling mechanisms. Combining selectivity analysis with kinetic modeling, we predicted that nickel dispersed on copper, i.e., Ni/Cu SAA, is a highly active and selective catalyst that can efficiently transform methane to ethylene. This work designs efficient SAA catalysts for direct methane activation and provides chemical insights into engineering compositions of SAAs to tune their catalytic performances.

Kothakonda, Manish↗
DOE OSTI2021

Elucidating the Role of Single-Atom Pd for Electrocatalytic Hydrodechlorination

In this study, we loaded Pd catalysts onto a reduced graphene oxide (rGO) support in an atomically dispersed fashion [i.e., Pd single-atom catalysts (SACs) on rGO or Pd 1 /rGO] via a facile and scalable synthesis based on anchor-site and photoreduction techniques. The as-synthesized Pd 1 /rGO significantly outperformed the Pd nanoparticle (Pdnano) counterparts in the electrocatalytic hydrodechlorination of chlorinated phenols. Downsizing Pd nano to Pd 1 leads to a substantially higher Pd atomic efficiency (14 times that of Pdnano), remarkably reducing the cost for practical applications. The unique single-atom architecture of Pd 1 additionally affects the desorption energy of the intermediate, suppressing the catalyst poisoning by Cl – , which is a prevalent challenge with Pdnano. Characterization and experimental results demonstrate that the superior performance of Pd 1 /rGO originates from (1) enhanced interfacial electron transfer through Pd–O bonds due to the electronic metal–support interaction and (2) increased atomic H (H*) utilization efficiency by inhibiting H 2 evolution on Pd 1 . Furthermore, this work presents an important example of how the unique geometric and electronic structure of SACs can tune their catalytic performance toward beneficial use in environmental remediation applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Probing Basal and Prismatic Planes of Graphitic Materials for Metal Single Atom and Subnanometer Cluster Stabilization

Abstract Supported metal single atom catalysis is a dynamic research area in catalysis science combining the advantages of homogeneous and heterogeneous catalysis. Understanding the interactions between metal single atoms and the support constitutes a challenge facing the development of such catalysts, since these interactions are essential in optimizing the catalytic performance. For conventional carbon supports, two types of surfaces can contribute to single atom stabilization: the basal planes and the prismatic surface; both of which can be decorated by defects and surface oxygen groups. To date, most studies on carbon‐supported single atom catalysts focused on nitrogen‐doped carbons, which, unlike classic carbon materials, have a fairly well‐defined chemical environment. Herein we report the synthesis, characterization and modeling of rhodium single atom catalysts supported on carbon materials presenting distinct concentrations of surface oxygen groups and basal/prismatic surface area. The influence of these parameters on the speciation of the Rh species, their coordination and ultimately on their catalytic performance in hydrogenation and hydroformylation reactions is analyzed. The results obtained show that catalysis itself is an interesting tool for the fine characterization of these materials, for which the detection of small quantities of metal clusters remains a challenge, even when combining several cutting‐edge analytical methods.

Vidal, Mathieu↗
DOE OSTI2024

First-Principles Insights into the Thermodynamics of Variable-Temperature Ammonia Synthesis on Transition-Metal-Doped Cu (100) and (111)

Ammonia (NH 3 ) is one of the most produced chemicals worldwide. NH 3 synthesis predominantly utilizes the Haber–Bosch (HB) process, requiring high temperatures and pressures. Despite significant process advances, ample opportunity remains for improving the rate, selectivity, catalyst stability, and energy efficiency. Inspired by a recently developed programmable heating and quenching (PHQ) technique, we present in this paper a first-principles screening of candidate single-atom alloy catalysts generated from doping (111) and (100) surfaces of copper (Cu), an ineffective HB catalyst in its pure form. We predict the thermodynamics of two rate-limiting reactions, N 2 dissociative adsorption and the final hydrogenation step leading up to NH 3 release, at 400 and 900 K. Thermodynamically, the former reaction is favored at low temperatures, while the latter is favored at high temperatures. Vanadium-, chromium-, and molybdenum-doped Cu surfaces, due to intermediate M–N covalent bonding character, emerge as appealing candidate catalysts for PHQ NH 3 synthesis, as they balance the thermodynamics of the above-mentioned reaction steps at their respective optimal temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Amorphizing noble metal chalcogenide catalysts at the single-layer limit towards hydrogen production

Rational design of noble metal catalysts with the potential to leverage efficiency is vital for industrial applications. Such an ultimate atom-utilization efficiency can be achieved when all noble metal atoms exclusively contribute to catalysis. In this work, we demonstrate the fabrication of a wafer-size amorphous PtSex film on a SiO 2 substate via a low-temperature amorphization strategy, which offers single-atom-layer Pt catalysts with high atom-utilization efficiency (~26 wt%). This amorphous PtSex (1.2 < x < 1.3) behaves as a fully activated surface, accessible to catalytic reactions, and features a nearly 100% current density relative to a pure Pt surface and reliable production of sustained high-flux hydrogen over a 2 inch wafer as a proof-of-concept. Furthermore, an electrolyser is demonstrated to generate a high current density of 1,000 mA cm –2 . Such an amorphization strategy is potentially extendable to other noble metals, including the Pd, Ir, Os, Rh and Ru elements, demonstrating the universality of single-atom-layer catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stabilizing Single-Atom Iron Electrocatalysts for Oxygen Reduction via Ceria Confining and Trapping

Atomically dispersed Fe-N-C materials recently hold great interest in costly Pt substitution for the cathodic oxygen reduction reaction of fuel cells. However, the heat treatment involved in the materials preparation excites Fe aggregating into low activity of nanosized species rather than high activity of single-atom Fe sites. Herein we proposed a new "ceria-assisted" strategy to preferentially generate the active single-atom Fe sites in Fe-N-C materials, which involves oxidative polymerization of pyrrole, Ce 3+ and Fe 3+ adsorption, and subsequent heat treatment. Owing to its spatial confinement and strong trapping for Fe atoms, ceria can effectively suppress agglomeration of isolated Fe atoms and stabilize the Fe atoms by bonding to O in the lattice during the heat treatment, leading to a high content of atomically dispersed Fe (4.6 wt.%). Accordingly, the final catalyst showed ultrahigh ORR activity with a half-wave potential of 0.915 V and kinetic current density of 7.15 mA cm -2 at 0.9 V. When it was as assembled an anion exchange membrane fuel cell, a large maximum power density of 496 mW cm -2 was achieved.

25 ENERGY STORAGE↗
DOE OSTI2022

Designing Ceria/Alumina for Efficient Trapping of Platinum Single Atoms

Cerium oxide (ceria) has been shown to be very effective at trapping platinum atoms, due to formation of stable surface complexes at step edges, where coordinatively unsaturated cerium cations are present. But ceria loses its effectiveness when heated to high temperatures, due to loss of surface area and growth in particle size associated with sintering of the oxide. Being a rare-earth, and with limited supplies worldwide, it is important to develop methods to improve the effectiveness of ceria as a catalyst support. Here we explore the performance for trapping Pt atoms when the ceria is supported on a high surface area alumina carrier. This helps create a more sustainable catalyst formulation, especially if we can retain the high dispersion of Pt seen on ceria supports. For this work, we studied the atom trapping efficacy of ceria/alumina samples with increasing ceria content (8 wt% - 50%) and contrasted the behavior with pure ceria. Electron microscopy reveals that when dispersed on alumina, ceria is present in the form of crystalline nanoparticles as well as isolated cerium ions. These two forms of ceria differ markedly in their ability to trap Pt atoms. Atomically dispersed cerium is present in the form of Ce 3+ cations on alumina, however this form of ceria is not effective for trapping Pt atoms. Our results show that the atom trapped Pt resides primarily on crystalline ceria nanoparticles. CO oxidation was used as a probe reaction to evaluate the performance of these Pt AT /ceria-alumina catalysts. As a result, we conclude that over the range of ceria loadings we investigated, 50% ceria/alumina represents the optimal catalyst support for achieving high surface area and atom trapping efficiency while helping reduce the total ceria content in this catalyst system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Highly dispersed Pt atoms and clusters on hydroxylated indium tin oxide: a view from first-principles calculations

Supported single-atom and small cluster catalysts have become highly popular in heterogeneous catalysis. These catalysts can maximize the metal atom utilization while still showing superior catalytic performance. One of the main challenges in producing these small cluster catalysts is their low binding strength with the support, which causes these small clusters to sinter into larger nanoparticles. We have used first-principles simulations to study small Pt n ( n : 1,2,3) clusters on indium oxide, tin doped indium oxide, and hydroxylated tin doped indium oxide. We report that the Pt n cluster is stabilized in the presence of tin and that this is especially the case for Pt single atoms on the hydroxylated indium tin oxide support, which are anchored to the support via the hydroxyl group. On this support, the Pt single atoms become more stable than Pt 2 and Pt 3 clusters, hence decreasing sintering. These findings provide a promising way to design single-atom catalysts on electrically conducting supports for electrocatalytic applications and to better understand how functional groups on supports can increase the adhesion of cluster catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Crowded supported metal atoms on catalytically active supports may compromise intrinsic activity: A case study of dual-site Pt/α-MoC catalysts

Increasing the surface population of supported catalytic sites, assuming these sites are stable, is considered a straightforward approach to improving the overall catalytic performance. Here, we report an exception represented by the Pt/α-MoC catalysts featuring atomically dispersed Pt. The Pt/α-MoC catalysts display very high activity for the reverse water gas shift reaction with near 100% CO selectivity for CO 2 :H 2 ratios from 0.25 to 4 and from 250 to 400 °C. Despite the excellent performance, the intrinsic activity per Pt-centric catalytic center declines as the Pt loading increases from 0.1 to 1.0 wt%. With the dispersed Pt evolving from isolated atoms to fully exposed ensembles, the shrinking inter-Pt-atom space impedes CO 2 activation at the critical Pt-Mo interfaces, where the Pt shall temporarily take the -O intermediates. The Pt, even as atomically dispersed without noticeable sintering, is underutilized in such a crowded state. This caution for high-loading catalyst design is translational to other systems where the direct catalytic roles of the supports are crucial.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Atomic-Scale Structure and Catalysis on Positively Charged Bimetallic Sites for Generation of H 2

In this paper, we report that a cationic bimetallic site consisting of one Pd and three Zn atoms (Pd 1 Zn 3 ) supported on ZnO (Pd 1 Zn 3 /ZnO) exhibits an extraordinarily high catalytic activity for the generation of H 2 through methanol partial oxidation (MPO) that is 2–3 orders of magnitude higher than that of a metallic Pd–Zn site on Pd–Zn nanoalloy (Pd–Zn/ZnO). Computational studies uncovered that the positively charged Pd atom of the subnanometer Pd 1 Zn 3 bimetallic site largely decreases the activation barrier for dehydrogenation of methanol as compared to a metallic Pd atom of Pd–Zn alloy, thus switching the rate-determining step of MPO from methanol dehydrogenation over a Pd–Zn alloy with high barrier to the O 2 dissociation step on a cationic Pd 1 Zn 3 site with a low barrier, which is supported by our kinetics studies. The significantly higher catalytic activity and selectivity for H 2 production over a cationic bimetallic site suggest a new approach to design bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synergizing Fe 2 O 3 Nanoparticles on Single Atom Fe‐N‐C for Nitrate Reduction to Ammonia at Industrial Current Densities

The electrochemical reduction of nitrates (NO 3 − ) enables a pathway for the carbon neutral synthesis of ammonia (NH 3 ), via the nitrate reduction reaction (NO 3 RR), which has been demonstrated at high selectivity. However, to make NH 3 synthesis cost-competitive with current technologies, high NH 3 partial current densities (j NH3 ) must be achieved to reduce the levelized cost of NH 3 . Here, the high NO 3 RR activity of Fe-based materials is leveraged to synthesize a novel active particle-active support system with Fe 2 O 3 nanoparticles supported on atomically dispersed Fe–N–C. The optimized 3×Fe 2 O 3 /Fe–N–C catalyst demonstrates an ultrahigh NO 3 RR activity, reaching a maximum j NH3 of 1.95 A cm −2 at a Faradaic efficiency (FE) for NH 3 of 100% and an NH 3 yield rate over 9 mmol hr −1 cm −2 . Operando XANES and post-mortem XPS reveal the importance of a pre-reduction activation step, reducing the surface Fe 2 O 3 (Fe 3+ ) to highly active Fe 0 sites, which are maintained during electrolysis. Durability studies demonstrate the robustness of both the Fe 2 O 3 particles and Fe–N x sites at highly cathodic potentials, maintaining a current of −1.3 A cm −2 over 24 hours. This work exhibits an effective and durable active particle-active support system enhancing the performance of the NO 3 RR, enabling industrially relevant current densities and near 100% selectivity.

active support↗
DOE OSTI2021

Origin of Selective Production of Hydrogen Peroxide by Electrochemical Oxygen Reduction

Oxygen reduction reaction (ORR) is one of the most important electrochemical reactions. Starting from a common reaction intermediate *–O–OH, the ORR splits into two pathways, either producing hydrogen peroxide (H 2 O 2 ) by breaking the *–O bond or leading to water formation by breaking the O–OH bond. However, it is puzzling why many catalysts, despite the strong thermodynamic preference for the O–OH breaking, exhibit high selectivity for hydrogen peroxide. Moreover, the selectivity is dependent on the potential and pH, which remain not understood. Here, for this work, we develop an advanced first-principles model for effective calculation of the electrochemical reaction kinetics at the solid–water interface, which were not accessible by conventional models. Using this model to study representative catalysts for H 2 O 2 production, we find that breaking the O–OH bond can have a higher energy barrier than breaking *–O, due to the rigidity of the O–OH bond. Importantly, we reveal that the selectivity dependence on potential and pH is rooted into the proton affinity to the former/later O in *–O–OH. For single cobalt atom catalyst, decreasing potential promotes proton adsorption to the former O, thereby increasing the H 2 O 2 selectivity. In contrast, for the carbon catalyst, the proton prefers the latter O, resulting in a lower H 2 O 2 selectivity in acid condition. These findings explain the experiments and highlight the kinetic origins of the selectivity. Our work improves the understanding of ORR by uncovering the proton affinity as a new factor and provides a new model to effectively simulate the atomic-level kinetics of heterogeneous electrochemistry.

08 HYDROGEN↗
DOE OSTI2025

Understanding the Active Site Structures and Achieving Catalytic Activity Tuning of Atomically Dispersed FeN 4 Sites for Oxygen Reduction Reaction

Atomically dispersed Fe–—N—C catalysts with high oxygen reduction reaction (ORR) activity have attracted great attention since the last decade. Due to comparable ORR activity and low material cost, they are promising platinum group metal (PGM)-free catalysts that can replace the commercialized Pt/C materials; furthermore, it can facilitate the efficiency of the fuel cell technologies and mitigate dependence on fossil fuels. Great advancements have been made to experimentally optimize the synthesis approach of the Fe–—N—C catalysts, enhance the ORR activity, and improve the catalyst stability. Similarly, recent theoretical studies also provide enriched understanding of the active site structures, properties, and reaction mechanisms. In this review, discussions are made upon utilizing combined experimental and computational spectroscopy to reveal the active site structures, employing mechanistic studies to investigate reaction thermodynamics and kinetics, as well as developing scaling relationships to assist the design and development of future PGM-free catalyst materials. Furthermore, recent advances in studying Fe–—N—C catalysts utilizing electrified surface models and explicit solvation models are also discussed. Not only can these aspects improve the accuracy of theoretical simulation and predictions but also deepen the understanding of the catalyst properties and reaction mechanisms under the effect of surface charges and solvent molecules.

Fe single-atom catalysts↗
DOE OSTI2021

Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C 3+ Olefin Formation from Ethanol

Direct and selective production of C 3+ olefins from bioethanol remains a critical challenge and important for the production of renewable transportation fuels such as aviation biofuels. In this study, we report a Cu–Zn–Y/Beta catalyst for selective ethanol conversion to butene-rich C 3+ olefins (88% selectivity at 100% ethanol conversion, 623 K), where the Cu, Zn, and Y sites are all highly dispersed. The ethanol-to-butene reaction network includes ethanol dehydrogenation, aldol condensation to crotonaldehyde, and hydrogenation to butyraldehyde, followed by further hydrogenation and dehydration reactions to form butenes. Cu sites play a critical role in promoting hydrogenation of the crotonaldehyde C═C bond to form butyraldehyde in the presence of hydrogen, making this a distinctive pathway from crotyl alcohol-based ethanol-to-butadiene reaction. Reaction rate measurements in the presence of ethanol and acetaldehyde (543 K, 12 kPa ethanol, 1.2 kPa acetaldehyde, 101.9 kPa H 2 ) over monometallic Zn/Beta and Y/Beta catalysts indicate that Y sites have higher C–C coupling rates than over Zn sites (initial C–C coupling rate, 6.1 × 10 –3 mol mol Y –1 s –1 vs 1.2 × 10 –3 mol mol Zn –1 s –1 ). Further, Lewis-acidic Y-site densities over Cu–Zn–Y/Beta with varied Y loadings are linearly correlated with the initial C–C coupling rates, suggesting that Lewis-acidic Y sites are the predominant sites that catalyze C–C coupling in Cu–Zn–Y/Beta catalysts. Control experiments show that the dealuminated Beta support is important to form higher density of Lewis-acidic Y sites in comparison with other supports such as silica, or deboronated MWW despite similar atomic dispersion of Y sites and Y–O coordination numbers over these supports, leading to more than 9 times higher C–C coupling rate per mole Y over dealuminated Beta relative to other supports. This study highlights the significance of unique combination of metal sites in contributing to the selective valorization of ethanol to C 3+ olefins, motivating for exploring multifunctional zeolite catalysts, where the presence of multiple sites with varying reactivities and functions allows for controlling the predominant molecular fluxes toward the desired products in complex reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗