Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sample integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Search for the standard model Higgs boson produced in association with a standard W or a Z boson and decaying to bottom quarks

A search for the standard model Higgs boson (H) decaying to b b-bar when produced in association with a weak vector boson (V) is reported for the following channels: W(mu nu)H, W(e nu)H, W(tau nu)H, Z(mu mu)H, Z(e e)H, and Z(nu nu)H. The search is performed in data samples corresponding to integrated luminosities of up to 5.1 inverse femtobarns at sqrt(s) = 7 TeV and up to 18.9 inverse femtobarns at sqrt(s) = 8 TeV, recorded by the CMS experiment at the LHC. An excess of events is observed above the expected background with a local significance of 2.1 standard deviations for a Higgs boson mass of 125 GeV, consistent with the expectation from the production of the standard model Higgs boson. The signal strength corresponding to this excess, relative to that of the standard model Higgs boson, is 1.0 +/- 0.5.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for the rare decay D 0 → γ γ at Belle

We search for the rare radiative decay D 0 → γγ using a data sample with an integrated luminosity of 832 fb –1 recorded by the Belle detector at the KEKB e + e – asymmetric-energy collider. Furthermore we find no statistically significant signal and set an upper limit on the branching fraction of B(D 0 → γγ) < 8.5 × 10 –7 at 90% confidence level. This is the most restrictive limit on the decay channel to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence for C P Violation in the Decay D + → K S 0 π +

Here we observe evidence for CP violation in the decay D + →K$0\atop{S}$π + using a data sample with an integrated luminosity of 977 fb -1 collected by the Belle detector at the KEKB e + e - asymmetric-energy collider. The CP asymmetry in the decay is measured to be (-0.363±0.094±0.067)%, which is 3.2 standard deviations away from zero, and is consistent with the expected CP violation due to the neutral kaon in the final state.

Ko, B. R.↗

Search for C P Violation in D 0 → π 0 π 0 Decays

We search for CP violation in neutral charm meson decays using a data sample with an integrated luminosity of 966 fb –1 collected with the Belle detector at the KEKB e + e – asymmetric-energy collider. The asymmetry obtained in the rate of D 0 and D 0 ¯ decays to the π 0 π 0 final state, [–0.03±0.64(stat)±0.10(syst)]%, is consistent with no CP violation. This constitutes an order of magnitude improvement over the existing result. Here, we also present an updated measurement of the CP asymmetry in the D0→K$^{0}_{S}$π 0 decay: ACP(D 0 → K$^{0}_{S}$π 0 ) = [–0.21±0.16(stat)±0.07(syst)]%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evidence for Superconductivity above 260 K in Lanthanum Superhydride at Megabar Pressures

Recent predictions and experimental observations of high T c superconductivity in hydrogen-rich materials at very high pressures are driving the search for superconductivity in the vicinity of room temperature. In this study, we have developed a novel preparation technique that is optimally suited for megabar pressure syntheses of superhydrides using pulsed laser heating while maintaining the integrity of sample-probe contacts for electrical transport measurements to 200 GPa. We detail the synthesis and characterization, including four-probe electrical transport measurements, of lanthanum superhydride samples that display a significant drop in resistivity on cooling beginning around 260 K and pressures of 190 GPa. Additional measurements on two additional samples synthesized the same way show resistance drops beginning as high as 280 K at these pressures. The drop in resistance at these high temperatures is not observed in control experiments on pure La as well as in partially transformed samples at these pressures, and x-ray diffraction as a function of temperature on the superhydride reveal no structural changes on cooling. Lastly, we suggest that the resistance drop is a signature of the predicted superconductivity in LaH 10 near room temperature, in good agreement with density functional structure search and BCS theory calculations.

08 HYDROGEN↗

Observation of $\tau$ lepton pair production in ultraperipheral lead-lead collisions at $\sqrt{s_\mathrm{NN}}$ = 5.02 TeV

We present an observation of photon-photon production of $\tau$ lepton pairs in ultraperipheral lead-lead collisions. The measurement is based on a data sample with an integrated luminosity of 404 $\mu$b$^{-1}$ collected by the CMS experiment at a nucleon-nucleon center-of-mass energy of 5.02 TeV. The $\gamma\gamma$$\to$$\tau^+\tau^-$ process is observed for $\tau\tau$ events with a muon and three charged hadrons in the final state. The measured fiducial cross section is $\sigma(\gamma\gamma$$\to$$\tau^+\tau^-)$ = 4.8 $\pm$ 0.6 (stat) $\pm$ 0.5 (syst) $\mu$b, in agreement with leading-order QED predictions. Using $\sigma(\gamma\gamma$$\to$$\tau^+\tau^-)$, we estimate a model-dependent value of the anomalous magnetic moment of the $\tau$ lepton of $a_\tau$ = 0.001 $^{+0.055}_{-0.089}$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fraction of χ c Decays in Prompt J / ψ Production Measured in p Pb Collisions at s NN = 8.16 TeV

The fraction of χ c 1 and χ c 2 decays in the prompt J / ψ yield, F χ c → J / ψ = σ χ c → J / ψ / σ J / ψ , is measured by the LHCb detector in p Pb collisions at s NN = 8.16 TeV . The study covers the forward ( 1.5 < y * < 4.0 ) and backward ( − 5.0 < y * < − 2.5 ) rapidity regions, where y * is the J / ψ rapidity in the nucleon-nucleon center-of-mass system. Forward and backward rapidity samples correspond to integrated luminosities of 13.6 ± 0.3 and 20.8 ± 0.5 nb − 1 , respectively. The result is presented as a function of the J / ψ transverse momentum p T , J / ψ in the range 1 < p T , J / ψ < 20 GeV / c . The F χ c → J / ψ fraction at forward rapidity is compatible with the LHCb measurement performed in p p collisions at s = 7 TeV , whereas the result at backward rapidity is 2.4 σ larger than in the forward region for 1 < p T , J / ψ < 3 GeV / c . The increase of F χ c → J / ψ at low p T , J / ψ at backward rapidity is compatible with the suppression of the ψ ( 2 S ) contribution to the prompt J / ψ yield. The lack of in-medium dissociation of χ c states observed in this study sets an upper limit of 180 MeV on the free energy available in these p Pb collisions to dissociate or inhibit charmonium state formation. © 2024 CERN, for the LHCb Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pi sampling: a methodical and flexible approach to initial macromolecular crystallization screening

Pi sampling, derived from the incomplete factorial approach, is an effort to maximize the diversity of macromolecular crystallization conditions and to facilitate the preparation of 96-condition initial screens. The Pi sampling method is derived from the incomplete factorial approach to macromolecular crystallization screen design. The resulting ‘Pi screens’ have a modular distribution of a given set of up to 36 stock solutions. Maximally diverse conditions can be produced by taking into account the properties of the chemicals used in the formulation and the concentrations of the corresponding solutions. The Pi sampling method has been implemented in a web-based application that generates screen formulations and recipes. It is particularly adapted to screens consisting of 96 different conditions. The flexibility and efficiency of Pi sampling is demonstrated by the crystallization of soluble proteins and of an integral membrane-protein sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing of focused ion beam damage in gold microcrystals: an in situ Bragg coherent X-ray diffraction imaging study

Focused ion beam (FIB) techniques are commonly used to machine, analyse and image materials at the micro- and nanoscale. However, FIB modifies the integrity of the sample by creating defects that cause lattice distortions. Methods have been developed to reduce FIB-induced strain; however, these protocols need to be evaluated for their effectiveness. Here, non-destructive Bragg coherent X-ray diffraction imaging is used to study the in situ annealing of FIB-milled gold microcrystals. Two non-collinear reflections are simultaneously measured for two different crystals during a single annealing cycle, demonstrating the ability to reliably track the location of multiple Bragg peaks during thermal annealing. The thermal lattice expansion of each crystal is used to calculate the local temperature. This is compared with thermocouple readings, which are shown to be substantially affected by thermal resistance. To evaluate the annealing process, each reflection is analysed by considering facet area evolution, cross-correlation maps of the displacement field and binarized morphology, and average strain plots. The crystal's strain and morphology evolve with increasing temperature, which is likely to be caused by the diffusion of gallium in gold below ~280°C and the self-diffusion of gold above ~280°C. The majority of FIB-induced strains are removed by 380–410°C, depending on which reflection is being considered. These observations highlight the importance of measuring multiple reflections to unambiguously interpret material behaviour.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Preparation and Characterization Methods of Thin Layer Samples for Standoff Detection

Detection of analytes deposited on surfaces is crucial for many applications: Development of methods to prepare thin layers (e.g. ~5 to 100 µm) is important for both system design and field studies. In this work, solid and liquid analytes were deposited on painted and bare substrates including aluminum, glass, plastic, and concrete using an ExactaCoat ultrasonic spray coater. Laboratory hemispherical reflectance (HRF) spectra were collected for samples with different layer thicknesses so as to characterize both the composition and layer thickness. Preliminary results demonstrate that to prepare homogenous layers on surfaces, parameters such as substrate type, analyte solubility, vapor pressure, paint color, surface porosity, and surface roughness are all important. Liquid chemicals posed several issues during deposition: Diisopropyl methyl phosphonate evaporated from surfaces more quickly than the other chemicals and was thus not detected in the HRF experiments. Less volatile liquids, such as tributylphosphate, remained on the surface for the duration of the test, but a uniform layer thickness could not be obtained as the liquid pooled to one side when mounted at an angle. The deposition of solids (e.g., acetaminophen, caffeine and methylphosphonic acid) from volatile solvents such as chloroform also proved problematic due to streaking caused by rapid solvent evaporation. Solids deposited from ethanol, however, worked well on bare substrates. For most samples plotting the integrated infrared band strength vs. surface thicknesses showed a linear relationship, confirming that the surface loading can be controlled by programming the concentration and the number of passes on the ultrasonic sprayer.

Thin layer, deposition, infrared standoff, Hemisph↗

Rapidity gap cross sections measured with the ATLAS detector in pp collisions at $\sqrt{s} = 7 \mbox{~TeV}$

Pseudorapidity gap distributions in proton-proton collisions at s√=7 ~TeVs=7 ~TeV are studied using a minimum bias data sample with an integrated luminosity of 7.1 μb -1 . Cross sections are measured differentially in terms of Δη F , the larger of the pseudorapidity regions extending to the limits of the ATLAS sensitivity, at η= ±4.9, in which no final state particles are produced above a transverse momentum threshold p$cut\atop{T}$ . The measurements span the region 0<Δη F < 8 for 200~MeV< p$cut\atop{T}$ <800~MeV200~MeV F , the data test the reliability of hadronisation models in describing rapidity and transverse momentum fluctuations in final state particle production. The measurements at larger gap sizes are dominated by contributions from the single diffractive dissociation process (pp→Xp), enhanced by double dissociation (pp→XY) where the invariant mass of the lighter of the two dissociation systems satisfies M Y ≲7 GeV. The resulting cross section is dσ/dΔη F ≈1 mb for Δη F ≳3. The large rapidity gap data are used to constrain the value of the Pomeron intercept appropriate to triple Regge models of soft diffraction. Finally, the cross section integrated over all gap sizes is compared with other LHC inelastic cross section measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of the diphoton decay of the Higgs boson and measurement of its properties

Observation of the diphoton decay mode of the recently discovered Higgs boson and measurement of some of its properties are reported. The analysis uses the entire dataset collected by the CMS experiment in proton-proton collisions during the 2011 and 2012 LHC running periods. The data samples correspond to integrated luminosities of 5.1fb -1 at √s=7 TeV and 19.7fb -1 at 8TeV. A clear signal is observed in the diphoton channel at a mass close to 125GeV with a local significance of 5.7σ, where a significance of 5.2σ is expected for the standard model Higgs boson. The mass is measured to be 124.70 ± 0.34 GeV = 124.70 ± 0.31(stat) ± 0.15(syst) GeV, and the best-fit signal strength relative to the standard model prediction is 1.14 +0.26 –0.23 = 1.14 ± 0.21(stat) +0.09 –0.05 (syst) +0.13 –0.09 (theo). Thus, additional measurements include the signal strength modifiers associated with different production mechanisms, and hypothesis tests between spin-0 and spin-2 models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the double-differential inclusive jet cross section in proton–proton collisions at $\sqrt{s} = 13\,\text {TeV} $

A measurement of the double-differential inclusive jet cross section as a function of jet transverse momentum $p_{\mathrm {T}} $ and absolute jet rapidity $|y |$ is presented. The analysis is based on proton–proton collisions collected by the CMS experiment at the LHC at a centre-of-mass energy of 13 $\,\text {TeV}$ . The data samples correspond to integrated luminosities of 71 and 44 $\,\text {pb}^\text {-1}$ for $|y |<3$ and $3.2<|y |<4.7$ , respectively. Jets are reconstructed with the anti- $k_{\mathrm {t}} $ clustering algorithm for two jet sizes, R, of 0.7 and 0.4, in a phase space region covering jet $p_{\mathrm {T}} $ up to 2 $\,\text {TeV}$ and jet rapidity up to $|y |$ = 4.7. Predictions of perturbative quantum chromodynamics at next-to-leading order precision, complemented with electroweak and nonperturbative corrections, are used to compute the absolute scale and the shape of the inclusive jet cross section. The cross section difference in R, when going to a smaller jet size of 0.4, is best described by Monte Carlo event generators with next-to-leading order predictions matched to parton showering, hadronisation, and multiparton interactions. In the phase space accessible with the new data, this measurement provides a first indication that jet physics is as well understood at $\sqrt{s}=13\,\text {TeV} $ as at smaller centre-of-mass energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the WZ production cross section in pp collisions at $\sqrt{s} = 7$ and 8 $\,\text{TeV}$ and search for anomalous triple gauge couplings at $\sqrt{s} = 8\,\text{TeV} $

The WZ production cross section is measured by the CMS experiment at the CERN LHC in proton–proton collision data samples corresponding to integrated luminosities of 4.9 $\,\text{fb}^{-1}$ collected at $\sqrt{s} = 7\,\text{TeV} $ , and 19.6 $\,\text{fb}^{-1}$ at $\sqrt{s} = 8\,\text{TeV} $ . The measurements are performed using the fully-leptonic WZ decay modes with electrons and muons in the final state. The measured cross sections for $71< m_{\mathrm{Z}} < 111\,\text{GeV} $ are $\sigma ({\mathrm{p}\mathrm{p}}\rightarrow {\mathrm{W}\mathrm{Z}},~\sqrt{s} = 7\,\text{TeV}) = 20.14 \pm 1.32\,\text{(stat)} \pm 0.38\,\text{(theo)} \pm 1.06\,\text{(exp)} \pm 0.44\,\text{(lumi)} $ $\,\text{pb}$ and $\sigma ({\mathrm{p}\mathrm{p}}\rightarrow {\mathrm{W}\mathrm{Z}},~\sqrt{s} = 8\,\text{TeV}) = 24.09 \pm 0.87\,\text{(stat)} \pm 0.80\,\text{(theo)} \pm 1.40\,\text{(exp)} \pm 0.63\,\text{(lumi)} $ $\,\text{pb}$ . Differential cross sections with respect to the $\mathrm{Z}$ boson $p_{\mathrm{T}}$ , the leading jet $p_{\mathrm{T}}$ , and the number of jets are obtained using the $\sqrt{s} = 8\,\text{TeV} $ data. The results are consistent with standard model predictions and constraints on anomalous triple gauge couplings are obtained.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cost-Effective Mapping of Benthic Habitats in Inland Reservoirs through Split-Beam Sonar, Indicator Kriging, and Historical Geologic Data

Because bottom substrate composition is an important control on the temporal and spatial location of the aquatic community, accurate maps of benthic habitats of inland lakes and reservoirs provide valuable information to managers, recreational users, and scientists. Therefore, we collected vertical, split-beam sonar data (roughness [E1], hardness [E2], and bathymetry) and sediment samples to make such maps. Statistical calibration between sonar parameters and sediment classes was problematic because the E1:E2 ratios for soft (muck and clay) sediments overlapped a lower and narrower range for hard (gravel) substrates. Thus, we used indicator kriging (IK) to map the probability that unsampled locations did not contain coarse sediments. To overcome the calibration issue we tested proxies for the natural processes and anthropogenic history of the reservoir as potential predictive variables. Of these, a geologic map proved to be the most useful. The central alluvial valley and mudflats contained mainly muck and organic-rich clays. The surrounding glacial till and shale bedrock uplands contained mainly poorly sorted gravels. Anomalies in the sonar data suggested that the organic-rich sediments also contained trapped gases, presenting additional interpretive issues for the mapping. We extended the capability of inexpensive split-beam sonar units through the incorporation of historic geologic maps and other records as well as validation with dredge samples. Through the integration of information from multiple data sets, were able to objectively identify bottom substrate and provide reservoir users with an accurate map of available benthic habitat.

bottom sediment, fisheries, geostatistics, GIS, ha↗

Meteorological Conditions and Atmospheric Components Concentration in Urban Sites in Knoxville, USA. 2024

This dataset, which contains five csv files, reports several meteorological conditions such as temperature, wind speed, solar radiation, and net radiation measured in Cumberland Estates Park (CEP) and Socially Equal Energy Efficient Development (SEEED) sites in Knoxville, Tennessee, USA. Also, hourly concentration of particulate matter (PM) with different aerodynamic diameter and inorganic gases such as ozone and nitrogen dioxide measured in the two are included in this dataset. The concentrations of PM and inorganic gases were monitored using the MODULAIR, a low-cost sensor equipped with a solar power module. The measurement of the concentration of biogenic and anthropogenic volatile organic compounds (VOCs) of the two sites was determined using a High-Resolution Proton Transfer Reaction Time of Flight Mass Spectrometer (PTR-ToF-MS). The VOCs were collected using miniature canister (400 mL) equipped with female RAVEqc valve to 1/4” male compression fitting and an integrated passive air sampling kit. This work is a part of a larger study which investigates the impact of soil moisture and plant evapotranspiration on ambient temperature and relative humidity in several city parks in Knoxville, Tennessee.

54 ENVIRONMENTAL SCIENCES↗