Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sample integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Measurement of e + e − → η J / ψ cross section from s = 3.808 GeV to 4.951 GeV

Using data samples with an integrated luminosity of 22.42 fb − 1 collected by the BESIII detector operating at the BEPCII storage ring, we measure the cross sections of the e + e − → η J / ψ process at center-of-mass energies from 3.808 to 4.951 GeV. Three structures are observed in the line shape of the measured cross sections. A maximum-likelihood fit with ψ ( 4040 ) , two additional resonances, and a nonresonant component are performed. The mass and width of the first additional state are ( 4219.7 ± 2.5 ± 4.5 ) MeV / c 2 and ( 80.7 ± 4.4 ± 1.4 ) MeV , respectively, consistent with the ψ ( 4230 ) . For the second state, the mass and width are ( 4386 ± 13 ± 17 ) MeV / c 2 and ( 177 ± 32 ± 13 ) MeV , respectively, consistent with the ψ ( 4360 ) . The first uncertainties are statistical, and the second ones are systematic. The statistical significance of ψ ( 4040 ) is 8.0 σ and those for ψ ( 4230 ) and ψ ( 4360 ) are more than 10.0 σ . Published by the American Physical Society 2024

Ablikim, M.↗
DOE OSTI2024

Study of e + e − → ω X ( 3872 ) and γ X ( 3872 ) from 4.66 to 4.95 GeV

Using data samples with an integrated luminosity of 4.5 fb − 1 collected by the BESIII detector at center-of-mass energies ranging from 4.66 GeV to 4.95 GeV, we study the processes of e + e − → ω X ( 3872 ) and e + e − → γ X ( 3872 ) . With the e + e − → ω X ( 3872 ) process, the branching fraction ratio R ≡ B ( X ( 3872 ) → γ J / ψ ) B ( X ( 3872 ) → π + π − J / ψ ) is measured to be 0.38 ± 0.2 0 stat ± 0.0 1 syst ( R < 0.83 at 90% confidence level). In addition, we measure the ratio of the average cross section of e + e − → ω X ( 3872 ) to e + e − → ω χ c 1 ( ω χ c 2 ) to be σ ω X ( 3872 ) / σ ω χ c 1 ( σ ω X ( 3872 ) / σ ω χ c 2 ) = 5.2 ± 1.0 stat ± 1.9 syst ( 5.5 ± 1.1 stat ± 2.4 syst ) . Finally, we search for the process of e + e − → γ X ( 3872 ) , and no obvious signal is observed. The upper limit on the ratio of the average cross section of e + e − → γ X ( 3872 ) to e + e − → ω X ( 3872 ) is set as σ γ X ( 3872 ) / σ ω X ( 3872 ) < 0.23 at 90% confidence level. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Search for e + e − → η ′ ψ ( 2 S ) at center-of-mass energies from 4.66 to 4.95 GeV

Using data samples with an integrated luminosity of 4.67 fb − 1 collected by the BESIII detector operating at the BEPCII Collider, we search for the process e + e − → η ′ ψ ( 2 S ) at center-of-mass energies from 4.66 to 4.95 GeV. No significant signal is observed, and upper limits for the Born cross sections σ B ( e + e − → η ′ ψ ( 2 S ) ) at the 90% confidence level are determined. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Test of lepton flavor universality with a measurement of R ( D * ) using hadronic B tagging at the Belle II experiment

The ratio of branching fractions R ( D * ) = B ( B ¯ → D * τ − ν ¯ τ ) / B ( B ¯ → D * ℓ − ν ¯ ℓ ) , where ℓ is an electron or muon, is measured using a Belle II data sample with an integrated luminosity of 189 fb − 1 at the SuperKEKB asymmetric-energy e + e − collider. Data is collected at the ϒ ( 4 S ) resonance, and one B meson in the ϒ ( 4 S ) → B B ¯ decay is fully reconstructed in hadronic decay modes. The accompanying signal B meson is reconstructed as B ¯ → D * τ − ν ¯ τ using leptonic τ decays. The normalization decay, B ¯ → D * ℓ − ν ¯ ℓ , produces the same observable final-state particles. The ratio of branching fractions is extracted in a simultaneous fit to two signal-discriminating variables in both channels and yields R ( D * ) = 0.262 − 0.039 + 0.041 ( stat ) − 0.032 + 0.035 ( syst ) . This result is consistent with the current world average and with Standard Model predictions. Published by the American Physical Society 2024

Adachi, I. (ORCID:0000000322870173)↗
DOE OSTI2019

Evidence for Superconductivity above 260 K in Lanthanum Superhydride at Megabar Pressures

Recent predictions and experimental observations of high T c superconductivity in hydrogen-rich materials at very high pressures are driving the search for superconductivity in the vicinity of room temperature. In this study, we have developed a novel preparation technique that is optimally suited for megabar pressure syntheses of superhydrides using pulsed laser heating while maintaining the integrity of sample-probe contacts for electrical transport measurements to 200 GPa. We detail the synthesis and characterization, including four-probe electrical transport measurements, of lanthanum superhydride samples that display a significant drop in resistivity on cooling beginning around 260 K and pressures of 190 GPa. Additional measurements on two additional samples synthesized the same way show resistance drops beginning as high as 280 K at these pressures. The drop in resistance at these high temperatures is not observed in control experiments on pure La as well as in partially transformed samples at these pressures, and x-ray diffraction as a function of temperature on the superhydride reveal no structural changes on cooling. Lastly, we suggest that the resistance drop is a signature of the predicted superconductivity in LaH 10 near room temperature, in good agreement with density functional structure search and BCS theory calculations.

08 HYDROGEN↗
DOE OSTI2023

Observation of $\tau$ lepton pair production in ultraperipheral lead-lead collisions at $\sqrt{s_\mathrm{NN}}$ = 5.02 TeV

We present an observation of photon-photon production of $\tau$ lepton pairs in ultraperipheral lead-lead collisions. The measurement is based on a data sample with an integrated luminosity of 404 $\mu$b$^{-1}$ collected by the CMS experiment at a nucleon-nucleon center-of-mass energy of 5.02 TeV. The $\gamma\gamma$$\to$$\tau^+\tau^-$ process is observed for $\tau\tau$ events with a muon and three charged hadrons in the final state. The measured fiducial cross section is $\sigma(\gamma\gamma$$\to$$\tau^+\tau^-)$ = 4.8 $\pm$ 0.6 (stat) $\pm$ 0.5 (syst) $\mu$b, in agreement with leading-order QED predictions. Using $\sigma(\gamma\gamma$$\to$$\tau^+\tau^-)$, we estimate a model-dependent value of the anomalous magnetic moment of the $\tau$ lepton of $a_\tau$ = 0.001 $^{+0.055}_{-0.089}$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Fraction of χ c Decays in Prompt J / ψ Production Measured in p Pb Collisions at s NN = 8.16 TeV

The fraction of χ c 1 and χ c 2 decays in the prompt J / ψ yield, F χ c → J / ψ = σ χ c → J / ψ / σ J / ψ , is measured by the LHCb detector in p Pb collisions at s NN = 8.16 TeV . The study covers the forward ( 1.5 < y * < 4.0 ) and backward ( − 5.0 < y * < − 2.5 ) rapidity regions, where y * is the J / ψ rapidity in the nucleon-nucleon center-of-mass system. Forward and backward rapidity samples correspond to integrated luminosities of 13.6 ± 0.3 and 20.8 ± 0.5 nb − 1 , respectively. The result is presented as a function of the J / ψ transverse momentum p T , J / ψ in the range 1 < p T , J / ψ < 20 GeV / c . The F χ c → J / ψ fraction at forward rapidity is compatible with the LHCb measurement performed in p p collisions at s = 7 TeV , whereas the result at backward rapidity is 2.4 σ larger than in the forward region for 1 < p T , J / ψ < 3 GeV / c . The increase of F χ c → J / ψ at low p T , J / ψ at backward rapidity is compatible with the suppression of the ψ ( 2 S ) contribution to the prompt J / ψ yield. The lack of in-medium dissociation of χ c states observed in this study sets an upper limit of 180 MeV on the free energy available in these p Pb collisions to dissociate or inhibit charmonium state formation. © 2024 CERN, for the LHCb Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Annealing of focused ion beam damage in gold microcrystals: an in situ Bragg coherent X-ray diffraction imaging study

Focused ion beam (FIB) techniques are commonly used to machine, analyse and image materials at the micro- and nanoscale. However, FIB modifies the integrity of the sample by creating defects that cause lattice distortions. Methods have been developed to reduce FIB-induced strain; however, these protocols need to be evaluated for their effectiveness. Here, non-destructive Bragg coherent X-ray diffraction imaging is used to study the in situ annealing of FIB-milled gold microcrystals. Two non-collinear reflections are simultaneously measured for two different crystals during a single annealing cycle, demonstrating the ability to reliably track the location of multiple Bragg peaks during thermal annealing. The thermal lattice expansion of each crystal is used to calculate the local temperature. This is compared with thermocouple readings, which are shown to be substantially affected by thermal resistance. To evaluate the annealing process, each reflection is analysed by considering facet area evolution, cross-correlation maps of the displacement field and binarized morphology, and average strain plots. The crystal's strain and morphology evolve with increasing temperature, which is likely to be caused by the diffusion of gallium in gold below ~280°C and the self-diffusion of gold above ~280°C. The majority of FIB-induced strains are removed by 380–410°C, depending on which reflection is being considered. These observations highlight the importance of measuring multiple reflections to unambiguously interpret material behaviour.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Preparation and Characterization Methods of Thin Layer Samples for Standoff Detection

Detection of analytes deposited on surfaces is crucial for many applications: Development of methods to prepare thin layers (e.g. ~5 to 100 µm) is important for both system design and field studies. In this work, solid and liquid analytes were deposited on painted and bare substrates including aluminum, glass, plastic, and concrete using an ExactaCoat ultrasonic spray coater. Laboratory hemispherical reflectance (HRF) spectra were collected for samples with different layer thicknesses so as to characterize both the composition and layer thickness. Preliminary results demonstrate that to prepare homogenous layers on surfaces, parameters such as substrate type, analyte solubility, vapor pressure, paint color, surface porosity, and surface roughness are all important. Liquid chemicals posed several issues during deposition: Diisopropyl methyl phosphonate evaporated from surfaces more quickly than the other chemicals and was thus not detected in the HRF experiments. Less volatile liquids, such as tributylphosphate, remained on the surface for the duration of the test, but a uniform layer thickness could not be obtained as the liquid pooled to one side when mounted at an angle. The deposition of solids (e.g., acetaminophen, caffeine and methylphosphonic acid) from volatile solvents such as chloroform also proved problematic due to streaking caused by rapid solvent evaporation. Solids deposited from ethanol, however, worked well on bare substrates. For most samples plotting the integrated infrared band strength vs. surface thicknesses showed a linear relationship, confirming that the surface loading can be controlled by programming the concentration and the number of passes on the ultrasonic sprayer.

Thin layer, deposition, infrared standoff, Hemisph↗
DOE OSTI2024

Meteorological Conditions and Atmospheric Components Concentration in Urban Sites in Knoxville, USA. 2024

This dataset, which contains five csv files, reports several meteorological conditions such as temperature, wind speed, solar radiation, and net radiation measured in Cumberland Estates Park (CEP) and Socially Equal Energy Efficient Development (SEEED) sites in Knoxville, Tennessee, USA. Also, hourly concentration of particulate matter (PM) with different aerodynamic diameter and inorganic gases such as ozone and nitrogen dioxide measured in the two are included in this dataset. The concentrations of PM and inorganic gases were monitored using the MODULAIR, a low-cost sensor equipped with a solar power module. The measurement of the concentration of biogenic and anthropogenic volatile organic compounds (VOCs) of the two sites was determined using a High-Resolution Proton Transfer Reaction Time of Flight Mass Spectrometer (PTR-ToF-MS). The VOCs were collected using miniature canister (400 mL) equipped with female RAVEqc valve to 1/4” male compression fitting and an integrated passive air sampling kit. This work is a part of a larger study which investigates the impact of soil moisture and plant evapotranspiration on ambient temperature and relative humidity in several city parks in Knoxville, Tennessee.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Measurement of azimuthal anisotropy of muons from charm and bottom hadrons in p p collisions at s = 13 TeV with the ATLAS detector

CERN-LHC. The elliptic flow of muons from the decay of charm and bottom hadrons is measured in pp collisions at 13 TeV using a data sample with an integrated luminosity of 150 pb^{-1} recorded by the ATLAS detector at the LHC. The muons from heavy-flavor decay are separated from light-hadron decay muons using momentum imbalance between the tracking and muon spectrometers. The heavy-flavor decay muons are further separated into those from charm decay and those from bottom decay using the distance-of-closest-approach to the collision vertex. The measurement is performed for muons in the transverse momentum range 4 < pT < 7 GeV and pseudorapidity range |η|<2.4. A significant non-zero elliptic anisotropy coefficient v2 is observed for muons from charm decays, while the v2 value for muons from bottom decays is consistent with zero within uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Secondary Vertexing in REDTOP Experiment Simulations

The η/η’ mesons are almost unique in the particle universe since they are Goldstone bosons and the dynamics of their decays are strongly constrained. Because the η/η’ have no charge, decays that violate conservation laws can occur without interfering with a corresponding current. The integrated eta meson samples collected in earlier experiments have been less than ~10 9 events, limiting considerably the search for such rare decays. The η’ sample is even more scarce. REDTOP (Rare Eta Decays with a TPC for Optical Photons) is being proposed at the proton booster of Fermilab with the intent of collecting more than 10 15 triggers/year for studies of rare η/η’ decays. Such statistics are sufficient for investigating several symmetry violations, and for searches for new particles beyond the Standard Model. This following project is most concerned with the detection of such new particles by way of the identification of detached, secondary vertices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The REDTOP experiment: Rare $\eta/\eta^{\prime}$ Decays To Probe New Physics

The $\eta$ and $\eta^{\prime}$ mesons are nearly unique in the particle universe since they are almost Goldstone bosons and the dynamics of their decays are strongly constrained. The integrated $\eta$-meson samples collected in earlier experiments amount to $\sim10^{9}$ events. A new experiment, REDTOP (Rare Eta Decays To Probe New Physics), is being proposed, with the intent of collecting a data sample of order 10$^{14}$ $\eta$ (10$^{12}$ $\eta^{\prime}$) for studying very rare decays. Such statistics are sufficient for investigating several symmetry violations, and for searching for particles and fields beyond the Standard Model. In this work we present several studies evaluating REDTOP sensitivity to processes that couple the Standard Model to New Physics through all four of the so-called \emph{portals}: the Vector, the Scalar, the Axion and the Heavy Lepton portal. The sensitivity of the experiment is also adequate for probing several conservation laws, in particular $CP$, $T$ and Lepton Universality, and for the determination of the $\eta$ form factors, which is crucial for the interpretation of the recent measurement of muon $g-2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Hierarchical Bayesian Thermonuclear Rate for the 7 Be(n,p) 7 Li Big Bang Nucleosynthesis Reaction

Big Bang nucleosynthesis provides the earliest probe of standard model physics, at a time when the universe was less than 1000 seconds old. It determines the abundances of the lightest nuclides, which give rise to the subsequent history of the visible matter in the universe. This work derives new 7 Be(n,p) 7 Li thermonuclear reaction rates based on all available experimental information. This reaction sensitively impacts the primordial abundances of 7 Be and 7 Li during big bang nucleosynthesis. We critically evaluate all available data and disregard experimental results that are questionable. For the nuclear model, we adopt an incoherent sum of single-level, two-channel, R -matrix approximation expressions, which are implemented into a hierarchical Bayesian model, to analyze the remaining six data sets we deem most reliable. In the fitting of the data, we consistently model all known sources of uncertainty, including discrepant absolute normalizations of different data sets, and also take the variation of the neutron and proton channel radii into account, hence providing less biased estimates of the 7 Be(n,p) 7 Li thermonuclear rates. From the resulting posteriors, we extract R -matrix parameters ($E_r, γ^2_n, γ^2_p$) and derive excitation energies and partial and total widths. Our fit is sensitive to the contributions of the first three levels above the neutron threshold. Reaction rates were computed by integrating 10,000 samples of the reduced cross section. Our 7 Be(n,p) 7 Li thermonuclear rates have uncertainties between 1.5% and 2.0% at temperatures of ≤1 GK. Finally, we compare our rates to previous results and find that the 7 Be(n,p) 7 Li rates most commonly used in big bang simulations have uncertainties that are too optimistic.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1977

Symbolic Laplace transforms of special functions

A MACSYMA implementation of the Laplace transform for special functions is described. The generalized hypergeometric functions are used as a basis for the representation of approximately fifty special functions. Only a relatively small number of formulas that generally involve generalized hypergeometric functions are utilized for the integration stage. A sample of actual examples and their timing is provided.

Avgoustis, Y.↗
NASA NTRS1984

The MST Radar Technique

The coherent radar technique is reviewed with special emphasis to mesosphere-stratosphere-troposphere (MST) radars operating in the VHF band. Some basic introduction to Doppler radar measurements and the radar equation is followed by an outline of the characteristics of atmospheric turbulence, viewed from the scattering and reflection processes of radar signals. Radar signal acquisition and preprocessing, namely coherent detection, digital sampling, pre-integration and coding, is briefly discussed. The data analysis is represented in terms of the correlation and spectrum analysis, yielding the essential parameters: power, signal-to-noise ratio, average and fluctuating velocity and persistency. The techniques to measure wind velocities, viz. the different modes of the Doppler method as well as the space antenna method are surveyed and the feasibilities of the MST radar interferometer technique are elucidated. A general view on the criteria to design phased array antennas is given. An outline of the hardware of a typical MST radar system is presented.

Roettger, J.↗
NASA NTRS1986

Ramp-integration technique for capacitance-type blade-tip clearance measurement

The analysis of a proposed new technique for capacitance type blade tip clearance measurement is presented. The capacitance between the blade tip and a mounted capacitance electrode within a guard ring forms one of the feedback elements of a high speed operational amplifier. The differential equation governing the operational amplifier circuit is formulated and solved for two types of inputs to the amplifier - a constant voltage and a ramp. The resultant solutions shows an output that contains a term that is proportional to the derivative of the product of the input voltage and the time constant of the feedback network. The blade tip clearance capacitance is obtained by subtracting the output of a balancing reference channel followed by integration. The proposed sampled data algorithm corrects the environmental effects and varying rotor speeds on-line, making the system suitable for turbine instrumentation. System requirements, block diagrams, and typical application are included.

Sarma, G. R.↗
NASA NTRS1986

Ramp-integration technique for capacitance-type blade-tip clearance measurement

The analysis of a proposed new technique for capacitance type blade tip clearance measurement is presented. The capacitance between the blade tip and a mounted capacitance electrode within a guard ring forms one of the feedback elements of a high speed operational amplifier. The differential equation governing the operational amplifier circuit is formulated and solved for two types of inputs to the amplifier - a constant voltage and a ramp. The resultant solution shows an output that contains a term that is proportional to the derivative of the product of the input voltage and the time constant of the feedback network. The blade tip clearance capacitance is obtained by subtracting the output of a balancing reference channel followed by integration. The proposed sampled data algorithm corrects for environmental effects and varying rotor speeds on-line, making the system suitable for turbine instrumentation. System requirements, block diagrams, and a typical application are included.

Sarma, Garimella R.↗