Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “research methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Shear-Sensitive Liquid Crystal Coating Method Applied Through Transparent Test Surfaces

Research conducted at NASA Ames Research Center has shown that the color-change response of a shear-sensitive liquid crystal coating (SSLCC) to aerodynamic shear depends on both the magnitude of the local shear vector and its direction relative to the observer's in-plane line of sight. In conventional applications, the surface of the SSLCC exposed to aerodynamic shear is illuminated with white light from the normal direction and observed from an oblique above-plane view angle of order 30 deg. In this top-light/top-view mode, shear vectors with components directed away from the observer cause the SSLCC to exhibit color-change responses. At any surface point, the maximum color change (measured from the no-shear red or orange color) always occurs when the local vector is aligned with, and directed away from, the observer. The magnitude of the color change at this vector-observer-aligned orientation scales directly with shear stress magnitude. Conversely, any surface point exposed to a shear vector with a component directed toward the observer exhibits a non-color-change response, always characterized by a rusty-red or brown color, independent of both shear magnitude and direction. These unique, highly directional color-change responses of SSLCCs to aerodynamic shear allow for the full-surface visualization and measurement of continuous shear stress vector distributions. The objective of the present research was to investigate application of the SSLCC method through a transparent test surface. In this new back-light/back-view mode, the exposed surface of the SSLCC would be subjected to aerodynamic shear stress while the contact surface between the SSLCC and the solid, transparent wall would be illuminated and viewed in the same geometrical arrangement as applied in conventional applications. It was unknown at the outset whether or not color-change responses would be observable from the contact surface of the SSLCC, and, if seen, how these color-change responses might relate to those observed in standard practice.

Reda, Daniel C.↗
NASA NTRS1978

A Mach line panel method for computing the linearized supersonic flow over planar wings

A method is described for solving the linearized supersonic flow over planar wings using panels bounded by two families of Mach lines. Polynomial distributions of source and doublet strength lead to simple, closed form solutions for the aerodynamic influence coefficients, and a nearly triangular matrix yields rapid solutions for the singularity parameters. The source method was found to be accurate and stable both for analysis and design boundary conditions. Similar results were obtained with the doublet method for analysis boundary conditions on the portion of the wing downstream of the supersonic leading edge, but instabilities in the solution occurred for the region containing a portion of the subsonic leading edge. Research on the method was discontinued before this difficulty was resolved.

Ehlers, F. E.↗
NASA NTRS2013

Process Optimization of Bismaleimide (BMI) Resin Infused Carbon Fiber Composite

Engineers today are presented with the opportunity to design and build the next generation of space vehicles out of the lightest, strongest, and most durable materials available. Composites offer excellent structural characteristics and outstanding reliability in many forms that will be utilized in future aerospace applications including the Commercial Crew and Cargo Program and the Orion space capsule. NASA's Composites for Exploration (CoEx) project researches the various methods of manufacturing composite materials of different fiber characteristics while using proven infusion methods of different resin compositions. Development and testing on these different material combinations will provide engineers the opportunity to produce optimal material compounds for multidisciplinary applications. Through the CoEx project, engineers pursue the opportunity to research and develop repair patch procedures for damaged spacecraft. Working in conjunction with Raptor Resins Inc., NASA engineers are utilizing high flow liquid infusion molding practices to manufacture high-temperature composite parts comprised of intermediate modulus 7 (IM7) carbon fiber material. IM7 is a continuous, high-tensile strength composite with outstanding structural qualities such as high shear strength, tensile strength and modulus as well as excellent corrosion, creep, and fatigue resistance. IM7 carbon fiber, combined with existing thermoset and thermoplastic resin systems, can provide improvements in material strength reinforcement and deformation-resistant properties for high-temperature applications. Void analysis of the different layups of the IM7 material discovered the largest total void composition within the [ +45 , 90 , 90 , -45 ] composite panel. Tensile and compressional testing proved the highest mechanical strength was found in the [0 4] layup. This paper further investigates the infusion procedure of a low-cost/high-performance BMI resin into an IM7 carbon fiber material and the optical, chemical, and mechanical analyses performed.

Ehrlich, Joshua W.↗
NASA NTRS2008

High-Performance Polyimide Powder Coatings

Much of the infrastructure at Kennedy Space Center and other NASA sites has been subjected to outside weathering effects for more than 40 years. Because much of this infrastructure has metallic surfaces, considerable effort is continually devoted to developing methods to minimize the effects of corrosion on these surfaces. These efforts are especially intense at KSC, where offshore salt spray and exhaust from Solid Rocket Boosters accelerate corrosion. Coatings of various types have traditionally been the choice for minimizing corrosion, and improved corrosion control methods are constantly being researched. Recent work at KSC on developing an improved method for repairing Kapton (polyimide)-based electrical wire insulation has identified polyimides with much lower melting points than traditional polyimides used for insulation. These lower melting points and the many other outstanding physical properties of polyimides (thermal stability, chemical resistance, and electrical properties) led us to investigate whether they could be used in powder coatings.

Source record↗
NASA NTRSDate not supplied

Resilience Modeling in Complex Engineered Systems with Human-Machine Interactions

In recent times, there has been a growing interest in resilience-based design. Resilience-based design operates on the concept that failures and unexpected events will happen, and when they occur, complex engineered systems should be able to operate within acceptable bounds and recover reasonably. Humans can contribute to the resilience of a system by quickly detecting unforeseen events and taking corrective measures. To this effect, researchers have proposed guidelines and design approaches that can help promote human-system resilience. However, there is no early design stage tool to validate if a system is indeed resilient after applying these guidelines and design methods. In this research, we integrate the Human Error and Functional Failure Reasoning (HEFFR) framework into the fmdtools toolkit to enable designers to model the combined (machine, human, and joint) failures, including their propagation and dynamic effects, during early design stages. This integrated tool also allows designers to model the effects of performance shaping factors, team dynamics, and human-machine interactions in systems of systems. A demonstrative example of a remotely operated rover is explored to demonstrate how this approach can be applied to understand resilience in complex engineered systems with human interactions.

Lukman Irshad↗
NASA NTRS2021

Guidance and Lessons Learned from COVID-19 for Human-Subjects Research

The goal of this effort was to identify innovative strategies, approaches, and methods that have enabled researchers to continue doing meaningful human subjects research during the COVID-19 pandemic. Many organizations and recent literature primarily focus on efforts for future research in a post-COVID environment. Additionally, there have been no systematic efforts across the agency or broader human factors community to coordinate or share strategies. Therefore, the focus was on acquiring knowledge gained by researchers from experiences during COVID that could be valuable to continue human-subjects research under existing restrictions.

Coronavirus Disease 2019↗
NASA NTRS2004

Validation of an Impedance Education Method in Flow

This paper reports results of a research effort to validate a method for educing the normal incidence impedance of a locally reacting liner, located in a grazing incidence, nonprogressive acoustic wave environment with flow. The results presented in this paper test the ability of the method to reproduce the measured normal incidence impedance of a solid steel plate and two soft test liners in a uniform flow. The test liners are known to be locally react- ing and exhibit no measurable amplitude-dependent impedance nonlinearities or flow effects. Baseline impedance spectra for these liners were therefore established from measurements in a conventional normal incidence impedance tube. A key feature of the method is the expansion of the unknown impedance function as a piecewise continuous polynomial with undetermined coefficients. Stewart's adaptation of the Davidon-Fletcher-Powell optimization algorithm is used to educe the normal incidence impedance at each Mach number by optimizing an objective function. The method is shown to reproduce the measured normal incidence impedance spectrum for each of the test liners, thus validating its usefulness for determining the normal incidence impedance of test liners for a broad range of source frequencies and flow Mach numbers. Nomenclature

Watson, Willie R.↗
NASA NTRS2004

Properties of a Formal Method for Prediction of Emergent Behaviors in Swarm-based Systems

Autonomous intelligent swarms of satellites are being proposed for NASA missions that have complex behaviors and interactions. The emergent properties of swarms make these missions powerful, but at the same time more difficult to design and assure that proper behaviors will emerge. This paper gives the results of research into formal methods techniques for verification and validation of NASA swarm-based missions. Multiple formal methods were evaluated to determine their effectiveness in modeling and assuring the behavior of swarms of spacecraft. The NASA ANTS mission was used as an example of swarm intelligence for which to apply the formal methods. This paper will give the evaluation of these formal methods and give partial specifications of the ANTS mission using four selected methods. We then give an evaluation of the methods and the needed properties of a formal method for effective specification and prediction of emergent behavior in swarm-based systems.

Rouff, Christopher↗
NASA NTRS1967

Arc research, section III

Spectroscopic methods to measure ion and electron temperatures of thermally thin plasma in local thermal equilibrium, spectral distribution of zirconium lamp, and vortex stabilized arc

SPECTRAL ENERGY DISTRIBUTION↗
NASA NTRS2002

A Unified LES/RANS Approach Using the CE/SE Method

The goal of the proposed research is to develop advanced large eddy simulations (LES) and Reynolds average Navier-Stokes (RANS) capabilities for complex problems using the conservation element and solution element (CE/SE) method. This proposed use of the CE/SE method is justified by the many demonstrated advantages of the CE/SE method over the traditional computational fluid dynamics (CFD) methods. The proposed research will produce improved engineering modeling for near-term applications for focus programs as well as long-term impacts on the fundamental understanding of turbulence.

Liou, William W.↗
NASA NTRS2020

NASA’s Carbon Monitoring System (CMS) and Arctic-Boreal Vulnerability Experiment (ABoVE) Social Network and Community of Practice

The NASA Carbon Monitoring System (CMS) and Arctic-Boreal Vulnerability Experiment (ABoVE) have been planned and funded by the NASA Earth Science Division. Both programs have a focus on engaging stakeholders and developing science useful for decision making. The resulting programs have funded significant scientific output and advancements in understanding how satellite remote sensing observations can be used to not just study how the Earth is changing, but also create data products that are of high utility to stakeholders and decisions makers. In this paper we focus on documenting thematic diversity of research themes and methods used, and how the CMS and ABoVE themes are related. We do this through developing a Correlated Topic Model on the 521 papers produced by the two programs and plotting the results in a network diagram. Through analysis of the themes in these papers, we document the relationships between researchers and institutions participating in CMS and ABoVE programs and the benefits from sustained engagement with stakeholders due to recurring funding. We note an absence of policy engagement in the papers and conclude that funded researchers need to be more ambitious and explicit in drawing the connection between their research and carbon policy implications in order to meet the stated goals of the CMS and ABoVE programs.

Molly E Brown↗
NASA NTRS1991

Precise time dissemination and applications development on the Bonneville Power Administration system

The Bonneville Power Administration (BPA) uses IRIG-B transmitted over microwave as its primary system time dissemination. Problems with accuracy and reliability have led to ongoing research into better methods. BPA has also developed and deployed a unique fault locator which uses precise clocks synchronized by a pulse over microwaves. It automatically transmits the data to a central computer for analysis. A proposed system could combine fault location timing and time dissemination into a Global Position System (GPS) timing receiver and close the verification loop through a master station at the Dittmer Control Center. Such a system would have many advantages, including lower cost, higher reliability, and wider industry support. Test results indicate the GPS has sufficient accuracy and reliability for this and other current timing requirements including synchronous phase angle measurements. A phasor measurement system which provides phase angle has recently been tested with excellent results. Phase angle is a key parameter in power system control applications including dynamic braking, DC modulation, remedial action schemes, and system state estimation. Further research is required to determine the applications which can most effectively use real-time phase angle measurements and the best method to apply them.

K. E. Martin↗
NASA NTRS2006

FLIPPER: Validation for Remote Ocean Imaging

one of the determining factors in the planet s ability to support life is the same factor that makes the Blue Planet blue: water. Therefore, NASA researchers have a focused interest in understanding Earth s oceans and their ability to continue sustaining life. A critical objective in this study is to understand the global processes that control the changes of carbon and associated living elements in the oceans. Since oceans are so large, one of the most widely used methods of this research is remote sensing, using satellites to observe changes in the ocean color that may be indicative of changes occurring at the surface. Major changes in carbon are due to photosynthesis conducted by phytoplankton, showing, among other things, which areas are sustaining life. Although valuable for large-scale pictures of an ocean, remote sensing really only provides a surface, and therefore incomplete, depiction of that ocean s sustainability. True and complete testing of the water requires local testing in conjunction with the satellite images in order to generate the necessary algorithm parameters to calculate ocean health. For this reason, NASA has spearheaded research to provide onsite validation for its satellite imagery surveys.

Source record↗
NASA NTRS2001

Non-Deterministic, Non-Traditional Methods (NDNTM)

The review effort identified research opportunities related to the use of nondeterministic, nontraditional methods to support aerospace design. The scope of the study was restricted to structural design rather than other areas such as control system design. Thus, the observations and conclusions are limited by that scope. The review identified a number of key results. The results include the potential for NASA/AF collaboration in the area of a design environment for advanced space access vehicles. The following key points set the context and delineate the key results. The Principal Investigator's (PI's) context for this study derived from participation as a Panel Member in the Air Force Scientific Advisory Board (AF/SAB) Summer Study Panel on 'Whither Hypersonics?' A key message from the Summer Study effort was a perceived need for a national program for a space access vehicle whose operating characteristics of cost, availability, deployability, and reliability most closely match the NASA 3rd Generation Reusable Launch Vehicle (RLV). The Panel urged the AF to make a significant joint commitment to such a program just as soon as the AF defined specific requirements for space access consistent with the AF Aerospace Vision 2020. The review brought home a concurrent need for a national vehicle design environment. Engineering design system technology is at a time point from which a revolution as significant as that brought about by the finite element method is possible, this one focusing on information integration on a scale that far surpasses current design environments. The study therefore fully supported the concept, if not some of the details of the Intelligent Synthesis Environment (ISE). It became abundantly clear during this study that the government (AF, NASA) and industry are not moving in the same direction in this regard, in fact each is moving in its own direction. NASA/ISE is not yet in an effective leadership position in this regard. However, NASA does have complementary software interoperability efforts that should be a part of any major ISE program. Software standards that assure interoperability of data systems and modeling representations are enabling for the proposed research advocated herein and should be a major element in the ISE initiative. The international standard for data interchange is known by the acronym 'STEP.' The NASA participation and lead for that effort is at the Goddard Space Flight Center. NASA/GRC is leading an effort to define CAD geometry standards through the Object Management Group (OMG). To enable the design environment so necessary to the above national vision for a unique space vehicle will require an integrating software environment with interoperability standards that allow the development and widespread deployment of tools and toolsets, rather than traditional "shrink-wrapped" software used by engineers today.

Cruse, Thomas A.↗
NASA NTRS1989

CSM research: Testbed development

The Computational Structural Mechanics (CSM) Activity at Langley Research Center is developing methods for structural analysis on modern computers. To facilitate that research effort, a Testbed Development environment is being constructed. It is the purpose of the Testbed to insulate researchers from differences in the computer operating systems of modern computer systems and permit concentrated effort on the analytical problem rather than the analytical tools required to solve that problem. While modern computers enable the solution of larger problems of increasing complexity, they do so at a cost. Distributed computer environments, vector processing hardware and multiple processors dominate the current computer environment and threaten to overwhelm future analysis software. The systems software for current computers becomes more complex in order to manage the increasing complexity. The applications developer is caught between conflicting goals. They must take advantage of the computing power of new computer systems while maintaining a stable software development system. The CSM Testbed is being developed to address this problem for the computational structural analysis research community. The Langley CSM activity was initiated in October 1984. The current directions for the Testbed Development Team of the Langley CSM activity are discussed.

Gillian, Ronnie E.↗
NASA NTRS1973

Study of methods of improving the performance of the Langley Research Center Transonic Dynamics Tunnel (TDT)

A study has been made of possible ways to improve the performance of the Langley Research Center's Transonic Dynamics Tunnel (TDT). The major effort was directed toward obtaining increased dynamic pressure in the Mach number range from 0.8 to 1.2, but methods to increase Mach number capability were also considered. Methods studied for increasing dynamic pressure capability were higher total pressure, auxiliary suction, reducing circuit losses, reduced test medium temperature, smaller test section and higher molecular weight test medium. Increased Mach number methods investigated were nozzle block inserts, variable geometry nozzle, changes in test section wall configuration, and auxiliary suction.

Source record↗