Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “progress properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Encapsulating High–Temperature Superconducting Twisted van der Waals Heterostructures Blocks Detrimental Effects of Disorder

High-temperature cuprate superconductors based van der Waals (vdW) heterostructures hold high technological promise. One of the obstacles hindering their progress is the detrimental effect of disorder on the properties of the vdW-devices-based Josephson junctions (JJs). Here, a new method of fabricating twisted vdW heterostructures made of Bi 2 Sr 2 CuCa 2 O 8+δ , crucially improving the JJ characteristics and pushing them up to those of the intrinsic JJs in bulk samples, is reported. The method combines cryogenic stacking using a solvent-free stencil mask technique and covering the interface by insulating hexagonal boron nitride crystals. Despite the high-vacuum condition down to 10 –6 mbar in the evaporation chamber, the interface appears to be protected from water molecules during the in situ metal deposition only when fully encapsulated. Comparing the current-voltage curves of encapsulated and unencapsulated interfaces, it is revealed that the encapsulated interfaces' characteristics are crucially improved, so that the corresponding JJs demonstrate high critical currents and sharpness of the superconducting transition comparable to those of the intrinsic JJs. Finally, it is shown that the encapsulated heterostructures are more stable over time.

2D materials↗

Trade-Offs in Thin Film Solar Cells with Layered Chalcostibite Photovoltaic Absorbers

Discovery of novel semiconducting materials is needed for solar energy conversion and other optoelectronic applications. However, emerging low-dimensional solar absorbers often have unconventional crystal structures and unusual combinations of optical absorption and electrical transport properties, which considerably slows down the research and development progress. Here, the effect of stronger absorption and weaker carrier collection of 2D-like absorber materials are studied using a high-throughput combinatorial experimental approach, complemented by advanced characterization and computations. It is found that the photoexcited charge carrier collection in CuSbSe 2 solar cells is enhanced by drift in an electric field, addressing a different absorption/collection balance. The resulting drift solar cells efficiency is <5% due to inherent J SC / V OC trade-off, suggesting that improved carrier diffusion and better contacts are needed to further increase the CuSbSe 2 performance. Furthermore, this study also illustrates the advantages of high-throughput experimental methods for fast optimization of the optoelectronic devices based on emerging low-dimensional semiconductor materials.

14 SOLAR ENERGY↗

Overexpression of hepatocyte growth factor in SBMA model mice has an additive effect on combination therapy with castration

Spinal and bulbar muscular atrophy (SBMA) is an inherited motor neuron disease caused by the expansion of a polyglutamine (polyQ)-encoding tract within the androgen receptor (AR) gene. The pathologic features of SBMA are motor neuron loss in the spinal cord and brainstem and diffuse nuclear accumulation and nuclear inclusions of mutant AR in residual motor neurons and certain visceral organs. Hepatocyte growth factor (HGF) is a polypeptide growth factor which has neuroprotective properties. To investigate whether HGF overexpression can affect disease progression in a mouse model of SBMA, we crossed SBMA transgenic model mice expressing an AR gene with an expanded CAG repeat with mice overexpressing HGF. Here, we report that high expression of HGF induces Akt phosphorylation and modestly ameliorated motor symptoms in an SBMA transgenic mouse model treated with or without castration. These findings suggest that HGF overexpression can provide a potential therapeutic avenue as a combination therapy with disease-modifying therapies in SBMA. - Highlights: • HGF overexpression ameliorates the motor phenotypes of the SBMA mouse model. • HGF overexpression induces Akt phosphorylation in the SBMA mouse model. • This is the first report of combination therapy in a mouse model of polyQ diseases.

60 APPLIED LIFE SCIENCES↗

Correlation between the nonlinear refractive index and structure of germanium-based chalcogenide glasses

The nonlinear refractive index (n{sub 2}) of new germanium-based sulfo-selenide glasses has been measured at 1064 nm using Z-scan technique, with picosecond pulses emitted by a 10 Hz Q-switched mode-locked Nd:Yag laser. We have determined the impact of the progressive replacement of S by Se on the nonlinear properties of these glasses. The value of n{sub 2} strongly increases with the substitution of S by Se, up to 350 times the n{sub 2} for fused silica. X-ray photoelectron spectroscopy (XPS) indicates that the increase of Ge-Se bond units in the glass network is responsible for the increase of n{sub 2}. The suitability of these glasses for optical switching at telecommunication wavelengths based on such nonlinear properties has been also confirmed.

36 MATERIALS SCIENCE↗

Nanoparticles: Their potential toxicity, waste and environmental management

This literature review discusses specific issues related to handling of waste containing nanomaterials. The aims are (1) to highlight problems related to uncontrolled release of nanoparticles to the environment through waste disposal, and (2) to introduce the topics of nanowaste and nanotoxicology to the waste management community. Many nanoparticles used by industry contain heavy metals, thus toxicity and bioaccumulation of heavy metals contained in nanoparticles may become important environmental issues. Although bioavailability of heavy metals contained in nanoparticles can be lower than those present in soluble form, the toxicity resulting from their intrinsic nature (e.g. their size, shape or density) may be significant. An approach to the treatment of nanowaste requires understanding of all its properties - not only chemical, but also physical and biological. Progress in nanowaste management also requires studies of the environmental impact of the new materials. The authors believe Amara's law is applicable to the impact of nanotechnologies, and society might overestimate the short-term effects of these technologies, while underestimating the long-term effects. It is necessary to have basic information from companies about the level and nature of nanomaterials produced or emitted and about the expectation of the life cycle time of nanoproducts as a basis to estimate the level of nanowaste in the future. Without knowing how companies plan to use and store recycled and nonrecycled nanomaterials, development of regulations is difficult. Tagging of nanoproducts is proposed as a means to facilitate separation and recovery of nanomaterials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Physisorption of Water on Graphene: Subchemical Accuracy from Many-Body Electronic Structure Methods

According to the article, wet carbon interfaces are ubiquitous in the natural world and exhibit anomalous properties, which could be exploited by emerging technologies. However, progress is limited by lack of understanding at the molecular level. Remarkably, even for the most fundamental system (a single water molecule interacting with graphene), there is no consensus on the nature of the interaction. We tackle this by performing an extensive set of complementary state-of-the-art computer simulations on some of the world’s largest supercomputers. From this effort a consensus on the water–graphene interaction strength has been obtained. Our results have significant impact for the physical understanding, as they indicate that the interaction is weaker than predicted previously. They also pave the way for more accurate and reliable studies of liquid water at carbon interfaces.

Chemistry↗

Highly compressible 3D periodic graphene aerogel microlattices

Graphene is a two-dimensional material that offers a unique combination of low density, exceptional mechanical properties, large surface area and excellent electrical conductivity. Recent progress has produced bulk 3D assemblies of graphene, such as graphene aerogels, but they possess purely stochastic porous networks, which limit their performance compared with the potential of an engineered architecture. Here we report the fabrication of periodic graphene aerogel microlattices, possessing an engineered architecture via a 3D printing technique known as direct ink writing. The 3D printed graphene aerogels are lightweight, highly conductive and exhibit supercompressibility (up to 90% compressive strain). Moreover, the Young’s moduli of the 3D printed graphene aerogels show an order of magnitude improvement over bulk graphene materials with comparable geometric density and possess large surface areas. Ultimately, adapting the 3D printing technique to graphene aerogels realizes the possibility of fabricating a myriad of complex aerogel architectures for a broad range of applications.

36 MATERIALS SCIENCE↗

Ultrafast X-ray scattering reveals vibrational coherence following Rydberg excitation

The coherence and dephasing of vibrational motions of molecules constitute an integral part of chemical dynamics, influence material properties, and underpin schemes to control chemical reactions. Significant progress has been made in understanding vibrational coherence through spectroscopic measurements, but the precise direct measurement of the structure of a vibrating excited-state polyatomic organic molecule has remained elusive. Here, we measure the time-evolving molecular structure of optically excited N-methyl morpholine through scattering with ultrashort X-ray pulses. The scattering signals are corrected for the different electron density in the excited electronic state of the molecule compared to the ground state. In conclusion, the experiment maps the evolution of the molecular geometry with femtosecond resolution, showing coherent motion that survives electronic relaxation and appears to persist for longer than previously seen using other methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of functional composite and all-inorganic nanostructured materials via infiltration of polymer templates with inorganic precursors

Robust and efficient approaches for the synthesis of materials with structure, porosity, and composition controlled at the nanoscale are highly important for a wide range of applications. Polymer templates are promising platforms to achieve such control. The self-assembly process of polymers provides access to diverse structures that can serve as templates for the deposition of inorganic materials. By infiltrating metal precursors from gas or liquid phases, using sequential infiltration synthesis (SIS) or swelling-based infiltration (SBI), respectively, into the polymer templates, one can create finely-tuned texturing of the surface films and bulk materials. In this review, we outline the specifics and dynamics of the polymer infiltration process and characterize the structure and properties of the synthesized materials. Finally, we highlight recent progress in implementing polymer infiltration-based nanoporous ceramics for many applications, including sensors, antireflective coatings, oil-absorbing foams, nanolithographic patterns, and catalytic materials.

Berman, Diana↗

Effect of dopant compensation on the temperature dependence of the transport properties in p-type monocrystalline silicon

In this paper, we investigate the temperature variations of the hole transport properties in initially uncompensated boron-doped Czochralski silicon progressively compensated through thermal donors activation. After each donor generation anneal, the boron and thermal donor concentrations in the samples are determined using (1) the change in carrier concentration at room temperature and (2) the analysis of the temperature variation of the carrier concentration in the range 77–350 K. By comparing both methods with theory, evidence is brought that down to 77 K the Hall factor is unaffected by compensation up to high compensation levels. This is of great interest for researchers working on new solar-grade materials since it nicely suggests that Hall factor models previously established for non-compensated silicon can be applied to compensated samples, for example, when extracting the individual dopant concentrations from the temperature variations of the hole concentration. At very high compensation levels, anomalous Hall data lead to erroneously low carrier mobility values. We showed that this artifact was due to the formation of a n-p-n transistor, arising from the preferential formation of thermal donors in the sample's subsurface. After rejecting these unphysical data from the analysis, we confirm that the hole mobility is greatly affected by compensation in the temperature range investigated. We eventually confront our experimental data to current mobility models and discuss the possible sources of discrepancy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Periodic Korteweg–de Vries soliton potentials generate quasisymmetric magnetic field strength in a finite plasma- β equilibrium

Quasisymmetry (QS) is a hidden symmetry of the magnetic field strength, B , that enables effective confinement of charged particles in a fully three-dimensional (3D) toroidal plasma equilibrium. Such equilibria are typically modeled by the ideal magnetohydrostatic (MHS) equations. The nonlinear, overdetermined nature of the QS MHS equations severely complicates our understanding of the interplay between 3D shaping, equilibrium properties such as pressure and rotational transform, and B . Progress has been made through expansions near the magnetic axis; however, a more comprehensive theory is desirable. Using a combination of analysis and regression on a large dataset of numerically optimized quasisymmetric stellarators, we demonstrate that there is a hidden lower dimensionality of B on a magnetic flux surface with connections to the theory of periodic solitons. We show that B on a flux surface is determined by three or at most four flux functions, each of which determines a critical value of the derivative of B along the field line. While being consistent with the near-axis models, our results are global and hold even on the last closed flux surface.

Differential geometry↗

Artificial intelligence for advanced functional materials: exploring current and future directions

This perspective addresses the topic of harnessing the tools of artificial intelligence (AI) for boosting innovation in functional materials design and engineering as well as discovering new materials for targeted applications in energy storage, biomedicine, composites, nanoelectronics or quantum technologies. It gives a current view of experts in the field, insisting on challenges and opportunities provided by the development of large materials databases, novel schemes for implementing AI into materials production and characterization as well as progress in the quest of simulating physical and chemical properties of realistic atomic models reaching the trillion atoms scale and with near ab initio accuracy.

36 MATERIALS SCIENCE↗

High-foot Implosion Workshop (March 22-24, 2016) Report

From March 22-24, 2016 at Workshop was held at Lawrence Livermore National Laboratory bringing together international experts in inertial confinement fusion research for the purpose of discussing the results from the ‘high-foot implosion campaign.’ The Workshop topics covered a retrospective of the first two years of experiments, a discussion of our best present understanding of what the data and our models imply, a discussion about remaining mysteries that are not understood at this time, and a discussion of our strategy moving forward. The material herein contains information from published and unpublished sources and is distributed solely for the purposes of this Workshop. Key assessments and conclusions resulting from the Workshop are: “The high foot campaign is extremely well documented and the interested reader is urged to go directly to the peer-reviewed journal literature for details.” – D. Haynes (LANL) “Overall progress in understanding of fuel and hot-spot properties near peak burn is excellent.” – V. Goncharov (LLE) “I would say that given the constraints of using the same hohlraum and similar capsule designs to the National Ignition Campaign, the High Foot Campaign achieved as much as could be expected. Indeed the demonstration of significant alpha particle heating remains a landmark achievement.” – J. Chittenden (Imperial College) “One of the principal points of discussion at the meeting was the importance of the roll over in inferred pressure that occurs with reducing coast time for different ablator thicknesses and the idea of repeating shot N140819 to confirm this. I would be very interested to see a return to the High Foot platform as a way to exercise the improved radiographic capabilities such as the curved crystal imaging system and as a way to examine the hypothesis of ‘burn truncation by aneurism.’ ” – J. Chittenden (Imperial College) “It is clear from the quality of the data presented during this workshop that the High-Foot experimental series has been a success. It has fulfilled the original goal of being an implosion platform that could separate the low-mode effects from the high-mode effects. Just because we now know when the High-Foot implosions break, it does not mean that they have served their purpose. This will be a very useful platform to study hohlraum coupling, to determine if controlling shape reduces residual kinetic energy, and testing hypotheses of how the hot-spot assembles.” – J. Knauer (LLE) “The LLNL "base camp" strategy for hohlraums was finally presented. Goals are to understand the safe operating space for the hohlraum and to find designs with good enough symmetry inside NIF's envelope, varying the CCR, pulse length and capsule designs. LLNL has a draft set of drive asymmetry requirements.” – P. Gauthier (CEA)

42 ENGINEERING↗

High Conductivity and Flexible Hybrid Solid State Electrolyte (Final Report: DOE-EE0007807)

The project objective is to develop flexible hybrid electrolyte with garnet nanofibers to achieve the following: (1) flexible, with greater mechanical strength (~ 10 MPa) and thermal stability than polymer electrolytes; (2) high room-temperature ionic conductivity, ~ 0.5 mS/cm; (3) stable interface with lithium metal and effective blocking of lithium dendrites at current densities up to 3 mA/cm 2 ; and (4) battery performance with Li S chemistry with an energy density of ≥ 450 Wh/kg (and ≥ 1000 Wh/L) and maintaining ≥ 80% of capacity up to 500 cycles. We synthesized garnet nanofibers, filled the porous region with polymer electrolyte, and characterized and tuned the flexible hybrid membrane properties. The flexible hybrid SSE microstructure was analyzed by leveraging the UMD AIMLab Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) tools and integrated with electrochemical methods at the UMERC Battery Fabrication Lab to investigate the properties and stability with Li metal anode. We developed a fundamental understanding of the mechanism of Li ionic diffusion in garnet nanofibers and their mechanical properties, as well as these properties for hybrid garnet-fiber/polymer hybrids. Work progressed toward the study of the electrode assembly during electrochemical cycling of the anode.

36 MATERIALS SCIENCE↗

Neutrons and Complementary Techniques for Quantum Materials

The virtual workshop “Neutrons and Complementary Techniques for Quantum Materials” was held September 6-8, 2022. As the investigation of quantum materials progresses, researchers can no longer deal with the bulk properties and surface states separately. Many open questions require the combination of complementary methods sensitive to different degrees of freedom to provide a more comprehensive view. This workshop intends to create a bridge for the science community focusing on different techniques to educate each other so we will gain a better understanding of the strength, weakness/limits, the most recent new developments, and future directions for each technique. Through this workshop we intended to raise the awareness of developments in techniques complimentary to neutron scattering, thereby maximizing the impact of our work and strengthening collaborations across experimental techniques in the research of quantum materials.

36 MATERIALS SCIENCE↗

Highlights of Discoveries for δ Scuti Variable Stars from the Kepler Era

The NASA Kepler and follow-on K2 mission (2009–2018) left a legacy of data and discoveries, finding thousands of exoplanets, and also obtaining high-precision long time-series data for hundreds of thousands of stars, including many types of pulsating variables. Here we highlight a few of the ongoing discoveries from Kepler data on δ Scuti pulsating variables, which are core hydrogen-burning stars of about twice the mass of the Sun. We discuss many unsolved problems surrounding the properties of the variability in these stars, and the progress enabled by Kepler data in using pulsations to infer their interior structure, a field of research known as asteroseismology.

79 ASTRONOMY AND ASTROPHYSICS↗

Observations of Binary Stars with the Differential Speckle Survey Instrument. VIII. Measures of Metal-poor and Triple Stars from 2015 to 2018

We present 248 speckle observations of 43 binary and 19 trinary star systems chosen to make progress in two main areas of investigation: the fundamental properties of metal-poor stars and star formation mechanisms. The observations were taken at the Gemini North and South telescopes during the period 2015 July to 2018 April, mainly with the Differential Speckle Survey Instrument but also with a few early results from the new ’Alopeke speckle camera at Gemini North. We find that the astrometry and photometry of these observations as a whole are consistent with previous work at Gemini. We present five new visual orbits for systems important in understanding metal-poor stars, three of which have orbital periods of less than 4 yr, and we indicate the degree to which these and future observations can impact our knowledge of stellar properties and star formation. In particular, we find a decrease in mass at fixed spectral type for metal-poor stars versus their solar-metallicity analogs that is consistent with predictions that are made from current stellar models.

79 ASTRONOMY AND ASTROPHYSICS↗