Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Recent advances in SRS on hydrogen isotope separation using thermal cycling absorption process

TCAP (Thermal Cycling Absorption Process) is a gas chromatograph in principle using palladium in the column packing, but it is unique in the fact that the carrier gas, hydrogen, is being isotopically separated and the system is operated in a semi-continuous manner. TCAP units are used to purify tritium. The recent TCAP advances at Savannah River Site (SRS) include compressor-free concept for heating/cooling, push and pull separation using an active inverse column, and compact column design. The new developments allow significantly higher throughput and better reliability from 1/10 of the current production system's footprint while consuming 60% less energy. Various versions are derived in the meantime for external customers to be used in fusion energy projects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Comparison of particle sizes between 238 PuO 2 before aqueous processing, after aqueous processing, and after ball milling

Particle sizes determined for a single lot of incoming Russian fuel and for a lot of fuel after aqueous processing are compared with particle sizes measured on fuel after ball-milling. The single samples of each type are believed to have particle size distributions typical of oxide from similar lots, as the processing of fuel lots is fairly uniform. Variation between lots is, as yet, uncharacterized. Sampling and particle size measurement methods are discussed elsewhere.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

The Electromagnetic Counterpart of the Binary Neutron Star Merger LIGO/Virgo GW170817. IV. Detection of Near-infrared Signatures of r -process Nucleosynthesis with Gemini-South

We present a near-infrared spectral sequence of the electromagnetic counterpart to the binary neutron star merger GW170817 detected by Advanced Laser Interferometer Gravitational-wave Observatory (LIGO)/Virgo. Our data set comprises seven epochs of J + H spectra taken with FLAMINGOS-2 on Gemini-South between 1.5 and 10.5 days after the merger. In the initial epoch, the spectrum is dominated by a smooth blue continuum due to a high-velocity, lanthanide-poor blue kilonova component. Starting the following night, all of the subsequent spectra instead show features that are similar to those predicted in model spectra of material with a high concentration of lanthanides, including spectral peaks near 1.07 and 1.55 μ m. Our fiducial model with 0.04 M {sub ⊙} of ejecta, an ejection velocity of v = 0.1 c , and a lanthanide concentration of X {sub lan} = 10{sup −2} provides a good match to the spectra taken in the first five days, although it over-predicts the late-time fluxes. We also explore models with multiple fitting components, in each case finding that a significant abundance of lanthanide elements is necessary to match the broad spectral peaks that we observe starting at 2.5 days after the merger. These data provide direct evidence that binary neutron star mergers are significant production sites of even the heaviest r -process elements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Rethinking surface reactions in nanoscale dry processes toward atomic precision and beyond: a physics and chemistry perspective

In this review, we discuss the progress of emerging dry processes with atomic precision. Researchers in the field of plasma processing and surface science have addressed the increasingly challenging demands of material selectivity by utilization of synergistic enhancement of etching or deposition. The discussion encompasses major challenges in the plasma science and technology community. Here, the focus of the review is advances in atomic layer etching and area-selective deposition with activation or deactivation, especially in terms of materials scaling and variety. Control of high-aspect-ratio feature fabrication in semiconductor manufacturing and etched shapes of interior features at the nanoscale are needed. Issues related to profile distortion have received much attention. State-of-the-art techniques used in semiconductor manufacturing are reviewed and future challenges are outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRSDate not supplied

Updated Analysis of the Trash Compaction and Processing System: Water Collected from Trash, Evaluation of the Source Contaminant Control System, and Zotek® F30 Foam Processing

The Trash Compaction and Processing System (TCPS) aims to reduce volume, biologically safen, physically stabilize, manage effluents, and recover resources from astronaut trash in the International Space Station (ISS). At NASA Ames Research Center (ARC), there are two test systems: the Heat Melt Compactor (HMC), which compacts the trash into a tile with temperature and pressure, and the Source Contaminant Control System (SCCS), which is the gas management subsystem aimed to reduce contaminants by converting them into carbon dioxide (CO 2 ) and water (H 2 O) vapor. Both the HMC and SCCS serve as test systems that support TCPS development by conducting risk reduction activities associated with an ISS technology demonstration. In this paper, the risk reduction activities discussed are the testing of different trash models for operational scenarios in the HMC, investigating the water extracted from those trash models, and managing the gaseous effluents from the trash via contaminant conversion through the SCCS. The HMC has undergone several tests of different trash models and cases in which a containment bag is used or not. For the first topic, this paper will analyze the water collected and recovered from these tests and analyze the effect of specific trash containment bags. For the second topic, this paper will individually evaluate the carbon bed and catalytic oxidizer (CatOx) to understand what components the carbon bed removes and what contaminants are converted in the CatOx. For the third and final topic, this paper will discuss Zotek® F30 foam processing in the HMC unit and testing verification in correlation to defined TCPS requirements. A foam model was added to reduce the volume of foam that take up space in the ISS. Overall, this paper is a compilation and an updated analysis of tests conducted in the lab-scale TCPS at ARC within the past year.

TCPS↗
DOE OSTI2023

Process Considerations for the Production of Hydrogen via Steam Reforming of Oxygenated Gases from Biomass Pyrolysis and Other Conversion Processes

Abstract In 2021, average CO 2 emissions was 9.7 g CO 2 /g H 2 produced, primarily based on steam methane reforming (SMR) technology that currently dominates hydrogen production. The substitution of natural gas (NG) and other fossil feedstocks in SMRs with renewable gases may be considered as an option for reducing greenhouse gas emissions. This analysis explores process impacts and constraints associated with the potential introduction of biogenic gases into SMRs. The results indicate that replacing NG in the fuel train of the SMR, followed by partial replacement of NG in the feed train may be a feasible approach. For the CO‐ and CO 2 ‐rich gas compositions assumed in this analysis the results indicate that feed train may accommodate up to 25 mole % of biogenic gases using allowances in existing designs and/or with small modifications, while maintaining similar hydrogen output. NG substitution in higher proportions require more major changes because of increased flow rates and heat exchange requirements in the system. Biogenic gases with lower CO 2 and higher calorific values are advantageous for NG substitution, and dry reforming using the CO 2 present in the feed gas can reduce steam consumption and increase process efficiency within limits where coking does not become a new constraint.

08 HYDROGEN↗
DOE OSTI2018

Enhanced Cyclability of Lithium-Oxygen Batteries with Electrodes Protected by Surface Films Induced via In Situ Electrochemical Process

Although the rechargeable lithium-oxygen (Li-O2) batteries have extremely high theoretical specific energy, the practical application of these batteries is still limited by the instability of their carbon-based air-electrode, Li metal anode, and electrolytes towards reduced oxygen species. Here we demonstrate a simple one-step in-situ electrochemical pre-charging strategy to generate thin protective films on both carbon nanotubes (CNTs) air-electrode and Li metal anode simultaneously under an inert atmosphere. Li-O2 cells after such pre-treatment demonstrate significantly extended cycle life of 110 and 180 cycles under the capacity-limited protocol of 1000 mAh g-1 and 500 mAh g-1, respectively, which is far more than those without pre-treatment. The thin-films formed from decomposition of electrolyte during in-situ electrochemical pre-charging process in an inert environment can protect both CNTs air-electrode and Li metal anode prior to conventional Li-O2 discharge/charge cycling where reactive reduced oxygen species are formed. This work provides a new approach for protections of carbon-based air-electrode and Li metal anode in practical Li-O2 batteries, and may also be applied to other battery systems.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2017

One-Pot Process for Hydrodeoxygenation of Lignin to Alkanes Using Ru-Based Bimetallic and Bifunctional Catalysts Supported on Zeolite Y

The synthesis of high-efficiency and low-cost multifunctional catalysts for hydrodeoxygenation (HDO) of waste lignin into advanced biofuels is crucial for enhancing current biorefinery processes. Inexpensive transition metals, including Fe, Ni, Cu, Zn, were severally co-loaded with Ru on HY zeolite to form bimetallic and bifunctional catalysts. These catalysts were subsequently tested for HDO conversion of softwood lignin and several lignin model compounds. Results indicated that the inexpensive earth abundant metals could modulate the hydrogenolysis activity of Ru and decrease the yield of low molecular weight gaseous side-products. Among all the prepared catalysts, Ru-Cu/HY showed the best HDO performance, giving the highest selectivity to hydrocarbon products. The improved catalytic performance of Ru-Cu/HY was probably due to the following three factors: (1) high total and strong acid sites, (2) good dispersion of metal species and limited segregation, (3) high adsorption capacity for polar fractions, including hydroxyl groups and ether bonds. Moreover, all the bifunctional catalysts were proven to be superior over the combination catalysts of Ru/Al2O3 and HY zeolite, and this could be attributed to the “intimacy criterion”. The practical use of the designed catalysts would be promising in lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Discrete One-Dimensional Coverage Process on a Renewal Process

Consider the following coverage model on ℕ, for each site i∈ℕ associate a pair (ξ{sub i},R{sub i}) where (ξ{sub i}){sub i≥0} is a 1-dimensional undelayed discrete renewal point process and (R{sub i}){sub i≥0} is an i.i.d. sequence of ℕ-valued random variables. At each site where ξ{sub i}=1 start an interval of length R{sub i}. Coverage occurs if every site of ℕ is covered by some interval. We obtain sharp conditions for both, positive and null probability of coverage. As corollaries, we extend results of the literature of rumor processes and discrete one-dimensional Boolean percolation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Spatial variation in soil microbial processes as a result of woody encroachment depends on shrub size in tallgrass prairie

Aims: As woody plants encroach into grassland ecosystems, we expect that altered plant-soil interactions will lead to changes in the microbial processes that affect carbon storage and nutrient cycling. Specifically, this research aimed to address how (1) soil chemistry, (2) microbial nutrient demand, and (3) the rate and source of potential soil C mineralization vary spatially under individual woody shrubs of varying size within a mesic grassland. Methods: Here, we collected soil samples from the center, the midpoint between the center and edge, the edge, and the shrub-grass ecotone of multiple Cornus drummondii shrubs across a shrub-size gradient in infrequently burned tallgrass prairie. Results: We found total soil carbon and total soil nitrogen increased with shrub size in every location but the edge. Microbial demand for nitrogen also increased as shrubs increased in size. Across all shrub sizes and sampling locations, potential soil carbon mineralization rates were higher when microbes broke down proportionally more shrub-derived (C 3 ) organic matter than grass-derived (C 4 ) organic matter. Conclusions: Our results suggest that the spatio-temporal context of woody encroachment is critical for understanding its impact on belowground microbial processes. In this ecosystem, a longer period of occupancy by woody plants increases potentially mineralizable carbon.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Investigation on the Fluid Flow and Decarburization Process in the RH Process

In the current study, mathematical models were developed to predict the fluid flow and motion of gas bubbles in the RH degasser. The multiphase model volume of fluid was employed to simulate the free surface in the vacuum chamber, while injected argon bubbles were treated as discrete-phase particles and tracked using the discrete-phase model. The expansion of argon bubbles was considered. The variation of the liquid level in the vacuum chamber and the effect of the number of nozzles on the recirculation rate were discussed in detail. The optimal number of nozzles was 6. Furthermore, the decarburization process was simulated by considering three reaction sites: the free surface, inner sites of the liquid steel in the vacuum chamber, and the bubble surface. The carbon contents predicted by the decarburization model were well validated by the measured results in the literature. The effect of the gas flow rate on the decarburization process was also investigated. With the increasing gas flow rate, the carbon content gradually decreased, and then reached the steady state. The optimal gas flow rate was 2400 L/min, which was explained by the comparison of the decarburization rate constants. Meanwhile, the decarburization reaction was in a quick decarburization stage for the first 7 minutes, and for the next 13 minutes, the decarburization rate constant rapidly decreased.

42 ENGINEERING↗
DOE OSTI2017

Improvements to sample processing and measurement to enable more widespread environmental application of tritium

Previous measurements have demonstrated the wealth of information that tritium (T) can provide on environmentally relevant processes. We present modifications to sample preparation approaches that enable T measurement by proportional counting on small sample sizes equivalent to 120 mg of water and demonstrate the accuracy of these methods on a suite of standardized water samples. This enhanced method should provide the analytical flexibility needed to address persistent knowledge gaps in our understanding of T behavior in the environment.

low background↗