Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “potential yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Evapotranspiration Partitioning of Eucalyptus benthamii and Pinus taeda During Early Stand Development

Increasing demand for bioenergy from intensively managed woody crops raises concerns of increased evapotranspiration and potential decreases in water yield. Pinus taeda (loblolly pine) is currently the most cultivated species in the southeastern USA, the country’s wood basket. However, Eucalyptus species could achieve greater productivity but with unknown ramifications for water budgets. To address the knowledge gap, we determined annual water budgets of loblolly pine and Eucalyptus benthamii (eucalypt) from growing years 3 through 5 in a replicated (n = 3) two-factor design comparing species and groundwater depth. Paired plots were established across a depth-to-groundwater gradient from shallow (~ 2 m) to deep (~ 8 m). Hydrologic budgets were constructed by measuring precipitation, interception, soil evaporation, and transpiration. Eucalypt evapotranspiration and above-ground biomass production for growing years 3 through 5 were on average 25 and 14% greater than pine, respectively; however, evapotranspiration did not differ across groundwater depths. At the end of growing year 5, eucalypt had higher transpiration and evapotranspiration per unit area than pine. Soil evaporation was substantial in young plantations (nearly 500 mm) in growing year 3 but declined as the canopy closed. Partitioning of evapotranspiration components in developing bioenergy plantations was dynamic due to canopy development driven decreases in soil evaporation and increases in transpiration and interception; total evapotranspiration was less variable from year to year. Water use efficiency (WUE, kg biomass/m 3 H 2 O) per unit evapotranspiration was similar between species, but WUE per unit transpiration was higher in pine. As a result, considering total evapotranspiration in young plantations can affect WUE interpretations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Preliminary studies on diversion and misuse for TRISO-fueled heat-pipe-cooled microreactors

Microreactors are being developed by multiple reactor designers to mass-produce nuclear facilities for worldwide deployment. Including microreactors in a country’s energy portfolio introduces new concerns for international safeguards regarding the number of reactor locations. Microreactors have smaller quantities of nuclear material compared to current light-water reactors, which makes diverting enough material for clandestine purposes difficult for a single reactor. Diversion or misuse of multiple microreactors to obtain a significant quantity introduces a new acquisition pathway. This work examines diversion and misuse scenarios for a realistic heat-pipe-cooled microreactor to understand how these scenarios would effect reactor operations to determine if monitoring key parameters could reduce the burden of inspection on monitoring agencies. Here, we determined misuse caused too drastic of an effect on core operations to be a valid acquisition pathway for the realistic heat-pipe-cooled microreactor. Diversion was explored across varying levels of severity, where potential diversion scenarios could yield one significant quantity of material from between six and eleven microreactors. Through examining the critical control drum angle, excess reactivity, control drum worth, and power distribution changes from nominal were detected over the operational lifetime, which could indicate a divergence from normal operations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Water-gas shift reaction in ceramic-carbonate dual-phase membrane reactor at high temperatures and pressures

Water-gas-shift (WGS) reaction is a critical step in integrated gasification combined cycles (IGCC) power plants with CO 2 capture. Membrane reactors made with a CO 2 -permselective ceramic-carbonate dual-phase (CCDP) membrane offers the potential to enhance hydrogen yield with simultaneous CO 2 capture for WGS reaction. The present work studies operation of WGS reaction in a tubular membrane reactor made of samarium-doped ceria infiltrated with lithium/sodium molten carbonate mixture. The WGS reaction was performed in the membrane reactor with and without a high-temperature WGS catalyst at 800–850 °C, feed pressure of 7 bar, the space velocity of 150–3000 h –1 , and a feed gas mixture of 45.7/13.1/41.3 mol% CO/CO 2 /N 2 with steam to carbon ratio of 4. The results show that the catalyst-free membrane reactor can convert 92% of carbon monoxide into CO 2 and H 2 and recover 29% CO 2 at 850 °C and a space velocity of 150 h –1 . However, in the catalyst-free membrane reactor, a significant amount of unwanted carbon deposition is observed. The side reactions can be minimized by reducing the operating pressure and increasing the operating temperature and space velocity, and completely avoided using a high-temperature catalyst at space velocity>500 h –1 . The membrane reactor with a WGS catalyst achieves CO conversion of about 85%, above the equilibrium conversion, and 40% CO 2 recovery without carbon deposition at high temperature and pressure. Finally, the membrane remains in the same structure and gas-tightness after the WGS reaction tests.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗
DOE OSTI2026

Uncertainty quantification for Joule heating processes in fibrous pore-resolved media

Joule heating (JH) is an energy-efficient and sustainable technique for heating materials. Its application for industrial heating, particularly, has been gaining attention due to its potential for increasing the yield of various chemical products. The process involves the use of heating elements (materials that are highly conductive electrically and thermally) to heat up other materials or substances. These conductors, however, can exhbit varying degrees of uncertainty due to non-linearities in their temperature-dependent properties, which could result in variable material behavior. In this work, we carry out uncertainty quantification (UQ) at the pore scale to describe the uncertainty of such materials. In so doing, we applied the non-intrusive polynomial chaos expansion (PCE) technique to quantify the uncertainty within the system. The steady state Joule heating equation was solved numerically at the pore scale mimicking conditions within a heating chamber for propane dehydrogenation, and various electro-thermal profiles were obtained. We also examined the effect of the number of sampling points (20 – 100) and order of the PCE coefficients (2 – 5) on the accuracy of the temperature evaluations. The results were then benchmarked with the standard Monte Carlo (MC) method. The average temperature of the 4th-order global PCE showed good agreement with the MC results (which were positively skewed). Orders greater than 4 gave an underestimation of the temperatures while predictions for the peak temperature improved as the number of sampling points increased.

Fagbemi, Samuel [ORNL] (ORCID:0000000236995025)↗
DOE OSTI2022

Stability and Activity of Cobalt Antimonate for Oxygen Reduction in Strong Acid

Guided by computational Pourbaix screening and high-throughput experiments aimed at the development of precious-metal-free fuel cells, we investigate rutile CoSb 2 O 6 as an electrocatalyst for oxygen reduction in 1 M sulfuric acid. Following 4 h of catalyst conditioning at 0.7 V vs RHE, operation at this potential for 20 h yielded an average current density of –0.17 mA cm –2 with corrosion at a rate of 0.04 nm hour –1 that is stoichiometric with catalyst composition. Surface Pourbaix analysis of the (111) surface identified partial H coverage under operating conditions. The Sb active site has an HO* binding free energy of 0.49 eV, which is near the peak of the kinetic 4e – ORR volcano for transition-metal oxides in acidic conditions. Furthermore, the experimental demonstration of operational stability and computational identification of a reaction pathway with favorable energetics place rutile CoSb 2 O 6 among the most promising precious-metal-free electrocatalysts for oxygen reduction in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ozone pollution reduction partially offsets the negative impact of climate change mitigation efforts on global hunger

Studies warning of the potential negative effects of climate mitigation on food security through the competing use of land for bioenergy and afforestation have overlooked the impact of reduced ozone and its potential enhancement of crop yields. Here we use six global agro-economic models to compare the impacts of climate change with climate mitigation policy and ozone reduction on agriculture. We find that ozone reduction could reduce the negative impact of a 1.5 °C-consistent climate change mitigation policy on global hunger by 15% in 2050. Sub-Saharan Africa and India, where hunger is most severe, account for 56% of this global reduction. Our findings indicate that the negative effects of climate mitigation on global hunger could be partially offset by the ozone reduction impact.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Facile synthetic routes to bridge-functionalised calix[4]arenes

Ring-opening of furans at the equatorial methylene bridge positions of a calix[4]arene gives access to a range of new molecules (in good yield) that have widespread potential impact in supramolecular chemistry amongst other areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Performance measurement of emerging 3- and 4-terminal tandem solar cells

Tandem solar cells are not limited to the conventional two-terminal (2-T) configuration. Multi-terminal designs like three-terminal (3-T) and four-terminal (4-T) devices have gained increasing attention in the PV community due to their relaxed current-matching requirement between subcells and their potential for enhanced energy yield. However, reliable and standardized methods for evaluating the performance of multi-terminal tandems remain underdeveloped. This work addresses this gap by providing comprehensive measurement guidelines tailored to these advanced configurations. We examine key coupling mechanisms between subcells, including the shared electrical load in 3-T devices and optical luminescent coupling in both 3-T and 4-T devices, to enable accurate and consistent performance evaluation. Furthermore, we propose two stabilized measurement methods for emerging 3-T tandem cells incorporating perovskite subcells: (1) a two-dimensional maximum-power-point tracking (MPPT) approach that continuously tracks both subcells' maximum power points (P MAX ) until convergence to stabilized outputs, and (2) a hybrid approach that combines MPPT for one subcell with stabilized current recording under fixed voltage biases near the P MAX of the other, allowing robust extraction of the overall stabilized P MAX (termed “MPPT + asymptotic P MA X scan” method). These methods directly address the dynamic current responses inherent to perovskite-containing tandems, providing a foundation for meaningful and reproducible performance comparisons.

14 SOLAR ENERGY↗
DOE OSTI2025

Integrated modeling of RF-induced tungsten erosion at ICRH antenna structures in the WEST tokamak *

This paper introduces STRIPE (Simulated Transport of RF Impurity Production and Emission), an advanced modeling framework developed to analyze material erosion and the global transport of eroded impurities originating from radio-frequency (RF) antenna structures in magnetic confinement fusion devices. STRIPE integrates multiple physics modules: SolEdge3x for scrape-off-layer plasma profiles, COMSOL for 3D RF rectified sheath potentials, RustBCA for erosion yields and surface interactions, and global impurity transport for 3D ion energy-angle distributions and impurity transport. The framework is applied to an ion cyclotron RF-heated L-mode discharge (#57877) in the WEST tokamak, where it predicts a thirty-fold increase in gross tungsten erosion at antenna limiters during the transition from ohmic to ICRH operation. Additionally, under ICRH conditions, a tenfold enhancement in erosion is observed when comparing RF sheath effects to purely thermal sheath conditions. High-charge-state oxygen ions ($\mathrm{O}$ 6+ and above) are identified as the dominant contributors to tungsten sputtering. To validate the model, a synthetic diagnostic tool based on inverse photon efficiency (S/XB coefficients) from the ColRadPy collisional-radiative model enables direct comparison with spectroscopic measurements. Model predictions using a plasma composition of 1% oxygen and 99% deuterium show good agreement with observed W − I (400.9 nm) emission for discharge #57877, supporting the accuracy of the STRIPE framework. This study focuses specifically on gross erosion calculations to demonstrate STRIPE’s capabilities. Future extensions of this work will incorporate net erosion, re-deposition, self-sputtering effects, and whole-device modeling of sputtered tungsten impurity transport. STRIPE is also being applied to other RF-heated linear and toroidal devices, offering valuable insights for antenna design, impurity control, and performance optimization in next-generation fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Measurement of the sodium and iodine scintillation quenching factors across multiple NaI(Tl) detectors to identify systematics

The amount of light produced by nuclear recoils in scintillating targets is strongly quenched compared to that produced by electrons. A precise understanding of the quenching factor is particularly interesting for weakly interacting massive particles (WIMP) searches and coherent elastic neutrino-nucleus scattering ( CE ν NS ) measurements since both rely on nuclear recoils, whereas energy calibrations are more readily accessible from electron recoils. There is a wide variation among the current measurements of the quenching factor in sodium iodide (NaI) crystals, especially below 10 keV, the energy region of interest for dark matter and CE ν NS studies. A better understanding of the quenching factor in NaI(Tl) is of particular interest for resolving the decades-old puzzle in the field of dark matter between the null results of most WIMP searches and the claim for dark matter detection by the DAMA/LIBRA collaboration. In this work, we measured sodium and iodine quenching factors for five small NaI(Tl) crystals grown with similar thallium concentrations and growth procedures. Unlike previous experiments, multiple crystals were tested, with measurements made in the same experimental setup to control systematic effects. The quenching factors agree in all crystals we investigated, and both sodium and iodine quenching factors are smaller than those reported by DAMA/LIBRA. The dominant systematic effect was due to the electron equivalent energy calibration originating from the nonproportional behavior of the NaI(Tl) light yield at lower energies, potentially the cause for the discrepancies among the previous measurements. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Novel n-type Device Architectures to Achieve 1 Volt V OC in Thin Film CdTe cells

The main goal of this project was to develop a novel thin film CdTe solar cell architecture based on an n-type absorber, which can overcome performance limitations associated with the typical p-Cd(Se)Te state-of-the-art architecture. Even today, the performance of the Cd(Se)Te cell continues to be limited by its open- circuit voltage, which is directly related to the net doping of the absorber. (currently @ approx. 900 mV for CdTe/CST device configuration). The proposed polycrystalline thin- film solar cell architecture was based on n-type CdTe (and CdSeTe) absorbers to overcome this limitation, since n-type CdTe absorbers offer advantages over p-type: (i) n-type dopability in CdTe is higher (than p), enabling higher doping and therefore higher V OC (ii) using a wide bandgap material as the p-contact, the n-CdTe cell can become a “bi-facial” cell, with the potential to increase energy yield up to 25% depending on environmental and mounting conditions.

14 SOLAR ENERGY↗
DOE OSTI2024

Particle Theory and Cosmology

This project covered theoretical studies in particle physics, particle astrophysics and cosmology, aiming to bridge theoretical models with observable phenomena. The central focus was on exploring innovative mechanisms that could simultaneously address several outstanding puzzles in these areas, including the nature of dark matter, the muon g-2 anomaly, the existence of topologically stable monopoles, the generation of observable gravitational waves from early universe phenomena and high energy cosmic rays. One of the major achievements of this project was the development of models that predict new physics accessible through current and forthcoming experimental setups, both in particle colliders and astrophysical observations. These models have been instrumental in proposing verifiable predictions concerning supersymmetric extensions, the dynamics of cosmic strings and monopoles, and the intricate processes underpinning baryogenesis and reheating post-inflation. In tackling the dark matter conundrum, the project proposed several candidates within extended frameworks, such as light Z' models, pseudo-Goldstone dark matter, and scenarios integrating dark matter with inflationary cosmology. Each model outlined pathways for detection through direct, indirect, and collider search strategies, marking significant strides in the hunt for dark matter. Another cornerstone of the project was the in-depth analysis of inflationary models compliant with the Trans-Planckian Censorship Conjecture, highlighting the compatibility of axion dark matter within such frameworks. This not only provided a coherent picture of early universe cosmology but also delineated clear experimental signatures. The exploration of grand unified theories yielded insights into the potential discovery of monopoles and novel particle configurations at energy scales accessible to current and future colliders. This endeavor expanded the predictive power of these theories, particularly in the context of proton decay and the properties of Higgs-portal dark matter. Throughout the project, significant emphasis was placed on ensuring the theoretical developments were grounded in experimental testability. This led to a series of publications across prestigious journals, each contributing to the vibrant discourse at the intersection of particle physics and cosmology. In summary, this project has elucidated pathways beyond the Standard Model that are ripe for exploration through both ongoing and upcoming experimental efforts. The comprehensive approach adopted herein not only enhances our understanding of the fundamental forces and constituents of the universe but also propels the field towards new frontiers in high-energy physics and cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Polymers used in 4 mm PV Connectors [Slides]

Polymer cracks are not a new problem in the PV industry. However, the suddenness and severity of the cracking connector model is new and concerning. Some sites are experiencing wide-spread cracking of a specific connector model. The preliminary investigation results are (1) there are potential clearance issues with the O-ring, leading to high mechanical stress; (2) potential use of lubrication yields polymer embrittlement; and (3) clear mechanical or chemical differences between the affected model and other PPE-based models using FTIR and tensile testing could not be demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Development of Biofuel and Bioenergy Processes for Photosynthetic CO 2 Assimilation (CRADA Final Report)

In order to fully exploit algae carbon assimilation for fuels, a preqrequisite is high photosynthetic efficiency and carbon conversion to fuel precursors. In the context of this collaborative project between NLR and EMRE we aim to address aspects of both the biological constraints around photosynthesis-driven carbon assimilation flux as well as elements that bridge the gap between laboratory cultivation and meaningful outdoor deployment, building on the unique capabilities of NLR and EMRE’s algae bioengineering teams. The goal of this work is to improve our understanding of key cellular biochemistry, mass cultivation, and biomass conversion constraints that presently limit the potential bio-oil yield. The proposed first phase of this work will focus on biomass growth improvements by testing hypotheses for alleviating identified metabolic and photophysiological bottlenecks. The results of this work could inform decisions by stakeholders (e.g., industry, community, investors) on the design and deployment of a sustainable biofuel supply chain from algae.

09 BIOMASS FUELS↗
DOE OSTI2021

Self-Assembling Metabolon Enables the Cell Free Conversion of Glycerol to 1,3-Propanediol

Cell free biocatalysis is showing promise as a replacement or complement to conventional microbial biocatalysts due to the potential for achieving high yields, titers, and productivities. However, there exist several challenges that need to be addressed before its broader industrial adoption is achieved. New paradigms and innovative solutions are needed to overcome these challenges. In this study we demonstrate high levels of glycerol conversion to 1,3-propanediol using a self-assembling metabolic pathway leveraging the arraying strategy (protein scaffolds) used by thermophilic cellulolytic bacteria to assemble their biomass degrading enzymes. These synthetic metabolons were capable of producing 1,3-PDO at a yield more than 95% at lower glycerol concentration and close to 70% at higher concentrations at a higher productivity rate than the equivalent microbial strain. One of the benefits of our approach is the fact that no enzyme purification is required, and that the assembly of the complex is accomplished in vivo before immobilization, while product formation is conducted in vitro. We also report the recovery of enzymatic activity upon fusion enzymes binding to these protein scaffolds, which could have broader applications when assembling arrayed protein complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Influence of cellular redox reactions on the structure and function of light harvesting and photosystems

Photosynthesis enables the conversion of one of the most abundant and free forms of energy, sunlight, into chemical bonds through the utilization of highly tailored protein complexes. These enzymes work in unison to absorb, convert, and transform light into high-energy electrons which are used for various functions important to metabolism and cellular protection. Over the last ∼50 years, photosynthetic organisms, such as cyanobacteria, have been adapted and engineered to produce valuable compounds like hydrogen and ethylene, among others. Often this is performed by removing native and/or adding in exogenous energy utilization pathways so that light energy is re-directed towards the synthesis of desired compounds. However, the interplay between primary light capture, conversion reactions, and the downstream electron utilization sinks is not fully understood. Further complicating these strategies are the plethora of compensatory mechanisms that facilitate steady electron flow and the maintenance of photosynthesis under dynamic conditions. This manifests as structural and functional plasticity of the photosynthetic machinery, often seen in modulations of oligomeric compositions or changes in protein-protein interactions and coupling with redox enzymes. Understanding these mechanisms is crucial to biotechnology applications because re-engineering electron utilization sinks has profoundly different effects on the light capture and conversion reactions of photosynthesis. Optimization requires a molecular-level understanding of the functional interrelationships between electron sinks and photosynthetic components that influence photosynthetic efficiencies to realize potential improvements in product yields. Here, we aim to highlight how perturbation of reductive reactions is revealing the functional plasticity in key components of the photosynthetic energy transduction pathway.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Investigating a Renewable-Resource-Targeting Mobile Aquaculture System Using Route Optimization Based on Optimal Foraging Theory

Aquaculture systems require careful consideration of location, which determines water conditions, pollution impacts, and hazardous conditions. Mobility may be able to address these factors while also supporting the targeting of renewable energy sources such as wind, wave, and solar power throughout the year. In this paper, a purpose-built mobile aquaculture ship is identified and modeled with a combination of renewable energy harvesting capabilities as a case study with the objective of assessing the potential benefits of targeting high renewable energy potentials to power aquaculture operations. A route optimization algorithm is created and tuned to simulate the mobility of the aquaculture platform and cost-basis comparisons are made to a stationary system. The small spatial variability in renewable energy potential when combining multiple resources significantly limits the benefits of a mobile, renewable-targeting aquaculture system. On the other hand, the consistent energy harvest from a blend of renewable energy types (13 kW installed wind capacity, 661 m 2 installed solar, and 1 m characteristic width wave-energy converter) suggests that the potential benefits of a mobile platform for offshore aquaculture (mitigation of environmental and social concerns, any potential positive impact on yields, hazard avoidance, etc.) can likely be pursued without significant increases in energy harvester costs.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗