Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Oscillatory phase separation in giant lipid vesicles induced by transmembrane osmotic differentials

Giant lipid vesicles are closed compartments consisting of semi-permeable shells, which isolate femto- to pico-liter quantities of aqueous core from the bulk. Although water permeates readily across vesicular walls, passive permeation of solutes is hindered. In this study, we show that, when subject to a hypotonic bath, giant vesicles consisting of phase separating lipid mixtures undergo osmotic relaxation exhibiting damped oscillations in phase behavior, which is synchronized with swell–burst lytic cycles: in the swelled state, osmotic pressure and elevated membrane tension due to the influx of water promote domain formation. During bursting, solute leakage through transient pores relaxes the pressure and tension, replacing the domain texture by a uniform one. This isothermal phase transition—resulting from a well-coordinated sequence of mechanochemical events—suggests a complex emergent behavior allowing synthetic vesicles produced from simple components, namely, water, osmolytes, and lipids to sense and regulate their micro-environment.

59 BASIC BIOLOGICAL SCIENCES↗

Model system studies with a phase separated membrane bioreactor

The operation and evaluation of a bioreactor designed for high intensity oxygen transfer in a microgravity environment is described. The reactor itself consists of a zero headspace liquid phase separated from the air supply by a long length of silicone rubber tubing through which the oxygen diffuses in and the carbon dioxide diffuses out. Mass transfer studies show that the oxygen is film diffusion controlled both externally and internally to the tubing and not by diffusion across the tube walls. Methods of upgrading the design to eliminate these resistances are proposed. Cell growth was obtained in the fermenter using Saccharomyces cerevisiae showing that this concept is capable of sustaining cell growth in the terrestial simulation.

Petersen, G. R.↗

Observations of homogeneous phase separation in liquid He3-He4 mixtures

The so-called miscibility gap that exists below the critical point in liquid He-3 - H-4 mixtures makes it possible to study binary phase composition, and the ensuing dispersions, in a system possessing an additional order parameter in one of the components. The physical behavior of a superfluid dispersion produced by pressure quenching an He-3 - He-4 mixture into the miscibility gap is described. The description applies both to quenches of homogeneous and phase-separated initial states in various regions of the miscibility gap.

Hoffer, J. K.↗

Effect of silver on phase separation and crystallization of niobium oxide containing glasses

Effect of silver introduction in sodium phosphate and sodium borophosphate glasses containing large amount of niobium oxide have been investigated using differential scanning calorimetry and XRD. Same sodium niobate phase in the Nb{sub 2}O{sub 5}-NaNbO{sub 3} based solid solution have been observed following two heat treatments designed for nucleation and growth of the crystalline phase. Silver introduction in the glass composition is clearly responsible for increasing the crystallization rate. Its effect after nucleation and crystallization treatments has been shown. Phase metastable separation is occurring during heat treatment with formation of a phosphate rich and niobium rich phase. Crystallization effect on optical transparency of glasses and on Raman scattering response have been investigated. - Graphical abstract: HRSEM micrograph of acid etched surface of silver doped sodium and niobium phosphate glass after nucleation heat treatment before (a) and after second heat treatment (b), (c) leading to phase separation and crystallization.

36 MATERIALS SCIENCE↗

Preparation of ultrafiltration membrane by phase separation coupled with microwave irradiation

Preparation of low fouling ultrafiltration membrane is still a big challenge in the membrane field. In this paper, polyether sulfone (PES) ultrafiltration membranes were prepared by non-solvent-induced phase separation (NIPS) coupled with microwave irradiation. Polyethylene glycol (PEG) and polyethylene glycol methacrylate (PEGMA) were used as additives to improve membrane hydrophilicity. In this study, the concentration of additive, irradiation time and microwave power was varied. The membranes were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy, while the performances were tested by adsorptive and ultrafiltration fouling experiments. The results show that the irradiation time and irradiation power are very important parameter that influence the membrane characteristic. In addition, type and concentration of additive are other important parameters. The results suggest that microwave irradiation is the most important parameter influencing the membrane characteristic. Both pure water flux and fouling resistance increase with increasing irradiation time, power irradiation, and additive concentration. PES membrane with addition of 10% w/w PEG and irradiated by 130 W microwave power for 180 seconds is the best membrane performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facet-controlled phase separation in supersaturated Au-Ni nanoparticles upon shape equilibration

Solid-state dewetting is used to fabricate supersaturated, submicron-sized Au-Ni solid solution particles out of thin Au/Ni bilayers by means of a rapid thermal annealing technique. Phase separation in such particles is studied with respect to their equilibrium crystal (or Wulff) shape by subsequent annealing at elevated temperature. It is found that (100) faceting planes of the equilibrated particles are enriched with Ni and (111) faces with Au. Both phases are considered by quantum-mechanical calculations in combination with an error-reduction scheme that was developed to compensate for a missing exchange-correlation potential that would reliably describe both Au and Ni. The observed phase configuration is then related to the minimization of strongly anisotropic elastic energies of Au- and Ni-rich phases and results in a rather unique nanoparticle composite state that is characterized by nearly uniform value of elastic response to epitaxial strains all over the faceted surface. The same conclusion is yielded also by evaluating bi-axial elastic moduli when employing interpolated experimental elastic constants. This work demonstrates a useful route for studying features of physical metallurgy at the mesoscale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Normal Gravity Testing of a Microchannel Phase Separator for In Situ Resource Utilization

A microchannel separator, with 2.7 millimeters as the smallest dimension, was tested, and a pore throat structure captured and removed liquid from a gas-liquid stream. The microchannel device was tested over a of gas and liquid flow rates ranging from 0.0005 up to 0. 14 volume fraction of liquid. Four liquids were tested with air. The biggest factor affecting the throughput is the capacity of liquid flow through the pore throat, which is dictated by permeability, liquid viscosity, flow area, pore throat thickness, and pressure difference across the pore throat. Typically, complete separation of gas and liquid fractions was lost when the liquid flow rate reached about 40 to 60% of the pore throat capacity. However, this could occur over a range of 10 to 90% utilization of pore throat capacity. Breakthrough occurs in the microchannel phase separator at conditions similar to the annular to plug flow transition of two-phase microgravity pipe flow implying that operating in the proper flow regime is crucial. Analysis indicates that the Bond number did not affect performance, supporting the premise that hydrodynamic, interfacial, and capillary forces are more important than gravity. However, the relative importance of gravity is better discerned through testing under reduced gravity conditions.

TeGrotenhuis, Ward E.↗

Phase separated membrane bioreactor - Results from model system studies

The operation and evaluation of a bioreactor designed for high intensity oxygen transfer in a microgravity environment is described. The reactor itself consists of a zero headspace liquid phase separated from the air supply by a long length of silicone rubber tubing through which the oxygen diffuses in and the carbon dioxide diffuses out. Mass transfer studies show that the oxygen is film diffusion controlled both externally and internally to the tubing and not by diffusion across the tube walls. Methods of upgrading the design to eliminate these resistances are proposed. Cell growth was obtained in the fermenter using Saccharomyces cerevisiae showing that this concept is capable of sustaining cell growth in the terrestrial simulation.

Petersen, G. R.↗

Magnetic State of Quasiordered Fe–Al Alloys Doped with Ga and B: Magnetic Phase Separation and Spin Order

Results of structural, magnetic, and Mössbauer studies of quasi ordered alloys Fe{sub 65}Al{sub 35−} {sub x}M{sub x} (M{sub x} = Ga, B; x = 0, 5 at %) are presented. The magnetic state of examined structurally–single-phase alloys at low temperatures is interpreted from the viewpoint of magnetic phase separation. An explanation is proposed for the observed behavior of magnetic characteristics of Fe{sub 65}Al{sub 35} and Fe{sub 65}Al{sub 30}Ga{sub 5} in the framework of the model of two magnetic phases, a ferromagnetic-type one and a spin density wave. The boron-doped alloy Fe{sub 65}Al{sub 30}B{sub 5} is shown to demonstrate behavior that is typical of materials with the ferromagnetic type of ordering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sustained phase separation and spin glass in Co-doped K x Fe 2 - y Se 2 single crystals

We describe Co substitution effects in K x Fe 2-y-z Co z Se 2 (0.06 ≤ z ≤ 1.73) single crystal alloys. By 3.5% of Co doping superconductivity is suppressed whereas phase separation of semiconducting K 2 Fe 4 Se 5 and superconducting/metallic K x Fe 2 Se 2 is still present. We show that the arrangement and distribution of superconducting phase (stripe phase) is connected with the arrangement of K, Fe and Co atoms. Semiconducting spin glass is found in proximity to superconducting state, persisting for large Co concentrations. At high Co concentrations ferromagnetic metallic state emerges above the spin glass. This is coincident with changes of the unit cell, arrangement and connectivity of stripe conducting phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Liquid–liquid phase separation in particles containing secondary organic material free of inorganic salts

Particles containing secondary organic material (SOM) are ubiquitous in the atmosphere and play a role in climate and air quality. Recently, research has shown that liquid–liquid phase separation (LLPS) occurs at high relative humidity (RH) (greater than ~95 %) in α -pinene-derived SOM particles free of inorganic salts, while LLPS does not occur in isoprene-derived SOM particles free of inorganic salts. We expand on these findings by investigating LLPS at 290 ± 1 K in SOM particles free of inorganic salts produced from ozonolysis of β -caryophyllene, ozonolysis of limonene, and photo-oxidation of toluene. LLPS was observed at greater than ~95 % RH in the biogenic SOM particles derived from β -caryophyllene and limonene while LLPS was not observed in the anthropogenic SOM particles derived from toluene. This work combined with the earlier work on LLPS in SOM particles free of inorganic salts suggests that the occurrence of LLPS in SOM particles free of inorganic salts is related to the oxygen-to-carbon elemental ratio (O : C) of the organic material. These results help explain the difference between the hygroscopic parameter κ of SOM particles measured above and below water saturation in the laboratory and field, and have implications for predicting the cloud condensation nucleation properties of SOM particles.

54 ENVIRONMENTAL SCIENCES↗

Nanopatterns by phase separation of patterned mixed polymer monolayers

Micron-size and sub-micron-size patterns on a substrate can direct the self-assembly of surface-bonded mixed polymer brushes to create nanoscale patterns in the phase-separated mixed polymer brush. The larger scale features, or patterns, can be defined by a variety of lithographic techniques, as well as other physical and chemical processes including but not limited to etching, grinding, and polishing. The polymer brushes preferably comprise vinyl polymers, such as polystyrene and poly(methyl methacrylate).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase separation and exchange biasing in the ferromagnetic IV-VI semiconductor Ge{sub 1-x}Mn{sub x}Te

Ferromagnetic Ge{sub 1-x}Mn{sub x}Te grown by molecular beam epitaxy with Mn content of x{sub Mn}approx =0.5 is shown to exhibit a strong tendency for phase separation. At higher growth temperatures apart from the cubic Ge{sub 0.5}Mn{sub 0.5}Te, a hexagonal MnTe and a rhombohedral distorted Ge{sub 0.83}Mn{sub 0.17}Te phase is formed. This coexistence of antiferromagnetic MnTe and ferromagnetic Ge{sub 0.5}Mn{sub 0.5}Te results in magnetic exchange-bias effects.

36 MATERIALS SCIENCE↗

Confinement-induced chirality in phase-separated achiral polymer solutions

Self-organization of polymers in constrained geometries largely determines their applications in high-strength materials, photonics, and electronics. Chiral organization under confinement is well established for polymers with intrinsic molecular chirality; however, it has not been observed for achiral polymers. Here, we report the emergence of chirality in spatially confined solutions of achiral rigid-rod polymers. We show that kinetically arrested phase separation of polymer solutions confined to narrow capillaries resulted in alternating segments of isotropic and chiral nematic phases. The chiral structure of the nematic segments originated from the interplay between the constrained geometry, surface anchoring, orientational wetting, and elastic anisotropy of rigid-rod polymers. The catenoidal shape of the chiral structure recapitulated the morphology of biological chiral structures. These findings provide insight into the organization of soft matter under spatial confinement and offer a straightforward way to form chiral structures from achiral synthetic polymers.

Science & Technology - Other Topics↗

Motility-induced phase separation and frustration in active matter swarmalators

Here we introduce a two dimensional system of active matter swarmalators composed of elastically interacting run-and-tumble active disks with an internal parameter Φ i . The disks experience an additional attractive or repulsive force with neighboring disks depending upon their relative difference in Φ i , making them similar to swarmalators used in robotic systems. In the absence of the internal parameter, the system forms a motility-induced phase separated (MIPS) state, but when the swarmalator interactions are present, a wide variety of other active phases appear depending upon whether the interaction is attractive or repulsive and whether the particles act to synchronize or ant-synchronize their internal parameter values. These phases include a gas-free gel regime, arrested clusters, a labyrinthine state, a regular MIPS state, a frustrated MIPS state for attractive antisynchronization, and a superlattice MIPS state for attractive synchronization.

97 MATHEMATICS AND COMPUTING↗

Research Update: Retardation and acceleration of phase separation evaluated from observation of imbalance between structure and valence in LiFePO{sub 4}/FePO{sub 4} electrode

LiFePO{sub 4} is a potential positive electrode material for lithium ion batteries. We have experimentally observed an imbalance between the valence change of Fe ions and the structure change from the LiFePO{sub 4} phase to the FePO{sub 4} phase during delithiation by simultaneous in situ XRD and XANES measurements in an LiFePO{sub 4}/FePO{sub 4} electrode. The ratio of structure change to valence change clearly indicates that the phase separation from LiFePO{sub 4} to FePO{sub 4} is suppressed at the beginning of delithiation, while it is accelerated at the latter stage, which is due to the coherent strain caused by the lattice misfit between the two phases.

36 MATERIALS SCIENCE↗

Phase separation in SiGe nanocrystals embedded in SiO{sub 2} matrix during high temperature annealing

SiGe nanocrystals have been formed in SiO{sub 2} matrix by cosputtering Si, Ge, and SiO{sub 2} independently on Si substrate. Effects of the annealing time and temperature on structural and compositional properties are studied by transmission electron microscopy, x-ray diffraction (XRD), and Raman spectroscopy measurements. It is observed that Ge-rich Si{sub (1-x)}Ge{sub x} nanocrystals do not hold their compositional uniformity when annealed at high temperatures for enough long time. A segregation process leading to separation of Ge and Si atoms from each other takes place. This process has been evidenced by a double peak formation in the XRD and Raman spectra. We attributed this phase separation to the differences in atomic size, surface energy, and surface diffusion disparity between Si and Ge atoms leading to the formation of nonhomogenous structure consist of a Si-rich SiGe core covered by a Ge-rich SiGe shell. This experimental observation is consistent with the result of reported theoretical and simulation methods.

36 MATERIALS SCIENCE↗