Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Helical spin ordering in room-temperature metallic antiferromagnet Fe 3 Ga 4

Metallic Fe 3 Ga 4 displays a complex magnetic phase diagram that supports an intermediate antiferromagnetic (AFM) helical spin structure (HSS) state at room temperature which lies between two ferromagnetic (FM) phases. Here, magnetic measurements along the three crystallographic axes were performed in order to develop a model for the temperature and field dependence of the HSS state. These results show that the AFM state is a helically ordered spiral propagating along the c-axis with the magnetic moments rotating in the ab-plane. Under applied magnetic field, the AFM state exhibits a metamagnetic transition to conical ordering before entering a fully field-polarized FM state at high fields. The conical ordering in the AFM state is anisotropic even within the ab-plane and may gives rise to Berry phase effects in transport measurements. Metallic conductivity from density of states computations was confirmed through resistivity measurements and no anomalous behavior was observed through the various magnetic transitions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Real-time latent heat emission during dynamic-compression freezing of water

Abstract Dynamic compression studies have been used to study the nucleation kinetics of water to ice VII for decades. Diagnostics such as photon Doppler velocimetry, transmission loss, and imaging have been used to measure pressure/density, and phase fraction, while temperature has remained the difficult thermodynamic property to quantify. In this work, we measured pressure/density and implemented a diagnostic to measure the temperature. In doing so the temperature shows quasi-isentropically compressed liquid water forms ice at pressures below the previously defined metastable limit, and the liquid phase is not hypercoooled as previously thought above that limit. Instead, the latent heat raises the temperature to the liquid-ice-VII melt line, where it remains with increasing pressure. We propose a hypothesis to corroborate these results with previous work on dynamic compression freezing. These results provide constraints for nucleation models, and suggest this technique be used to investigate phase transitions in other materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A Comparison of Solidification Structures and Submicroscale Cellular Segregation in Rapidly Solidified Stainless Steels Produced via Two-Piston Splat Quenching and Laser Powder Bed Fusion

Fusion-based additive manufacturing techniques leverage rapid solidification (RS) conditions to create parts with complex geometries, unique microscale/nanoscale morphological features, and elemental segregation. Three custom composition stainless steel alloys with varying chromium equivalence to nickel equivalence ratio (Cr eq /Ni eq ) between 1.53 and 1.95 were processed using laser powder bed fusion (LPBF) and/or two-piston splat quenching (SQ) to produce solidification rates estimated between 0.4 and 0.8 m/s. Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to collect high-resolution images, electron backscatter diffraction (EBSD) phase identification, and measure cellular segregation. Similar features were observed in both LPBF and SQ samples including phase and microstructure, nanoscale oxide particles, cell size, and segregation behavior. However, dislocation pileup was observed along the cell boundaries only in the LPBF austenite solidified microstructure. Targeted adjustment of the SQ feedstock Cr and Ni concentrations, within the ASTM A240 specification for 316L resulted in no observable impact on the cell size, oxide particle size, or magnitude of segregation. Also, the amount of Ni segregation in the ferrite solidified microstructures did not significantly differ, regardless of Cr/Ni eq or processing technique. Here, SQ is demonstrated as capable of simulating RS rates and microstructures similar to LPBF for use as an alternative screening tool for new RS alloy compositions.

42 ENGINEERING↗
DOE OSTI2022

Geometric pumping and dephasing at topological phase transition

A measure-preserving formalism (MPF) is constructed and applied to spin/band models, which yield observations about pumping. It occurs at the topological phase transition, i.e., a Z 2 flip, suggesting that Z 2 can imply bulk effects. The model's asymptotic behavior is analytically solved via MPF. The pumping probability is geometric, fractional, and has a ceiling of $\frac{1}{2}$. Intriguingly, theorems are proved about occurrence conditions, which are linked to the system's dimension and the distinction between rational and irrational numbers. Finally, experimental detection is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Brine Availability Test in Salt, a Heated Borehole Experiment at the Waste Isolation Pilot Plant, New Mexico, USA - 20233

The Brine Availability Tests in Salt is a US Department of Energy Office of Nuclear Energy supported activity as part of the Spent Fuel and Waste Disposition Campaign where we are performing simultaneous heated and control experiments in adjacent horizontal boreholes in the WIPP Salt Disposal Investigation drifts as part of experimental Phase 1. Phase 1a of BATS, a low-cost, small spatial-scale experiment performed in order to design instrumentation and methods for further experimentation in the URL, has been completed (June 2018 - May 2019) and is described elsewhere. In coincidence with multiple physical parameters that will be measured over the duration of the experiment, we will be measuring the liquid and vapor phases of H{sub 2}O as well as its isotopic content (not measured in Phase 1a). Three different forms of water occur in natural salts: as fluid in macro scale (mm size) inclusions, as intergranular free H{sub 2}O and as H{sub 2}O incorporated in hydrous minerals. Each of these forms has potentially different stable isotope signatures and will be influenced differentially by heat induced transport and by interaction with introduced tracers. Continuous measurement of vapor phase H{sub 2}O isotopes during borehole heating will be impacted by several effects: 1) evaporation as liquid brine flows into the borehole and evaporates completely or partially into the dry N{sub 2} stream; 2) steam from dehydration of hydrous minerals, that may enter the borehole; and 3) hydrous minerals that may form in the borehole (preferentially incorporating heavier isotopes). The continuous time series collected over the course of the heating test will be combined with analyses of pre-test and post-test collected samples of test site salt to investigate the contributions of each of the three water types as H{sub 2}O is mobilized due to the effects of heating. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Differential cross-section measurements of Higgs boson production in the H → τ + τ - decay channel in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Differential measurements of Higgs boson production in the τ-lepton-pair decay channel are presented in the gluon fusion, vector-boson fusion (VBF), VH and $t\overline{t}H$ associated production modes, with particular focus on the VBF production mode. The data used to perform the measurements correspond to 140 fb -1 of proton-proton collisions collected by the ATLAS experiment at the LHC. Two methods are used to perform the measurements: the Simplified Template Cross-Section (STXS) approach and an Unfolded Fiducial Differential measurement considering only the VBF phase space. For the STXS measurement, events are categorized by their production mode and kinematic properties such as the Higgs boson’s transverse momentum (${p}_{\textrm{T}}^{\textrm{H}}$ ), the number of jets produced in association with the Higgs boson, or the invariant mass of the two leading jets (mjj). For the VBF production mode, the ratio of the measured cross-section to the Standard Model prediction for m jj > 1.5 TeV and ${p}_{\textrm{T}}^{\textrm{H}}$ > 200 GeV (${p}_{\textrm{T}}^{\textrm{H}}$ < 200 GeV) is ${1.29}_{-0.34}^{+0.39}$ (${0.12}_{-0.33}^{+0.34}$ ). This is the first VBF measurement for the higher-${p}_{\textrm{T}}^{\textrm{H}}$ criteria, and the most precise for the lower-${p}_{\textrm{T}}^{\textrm{H}}$ criteria. The fiducial cross-section measurements, which only consider the kinematic properties of the event, are performed as functions of variables characterizing the VBF topology, such as the signed ΔΦ jj between the two leading jets. The measurements have a precision of 30%–50% and agree well with the Standard Model predictions. These results are interpreted in the SMEFT framework, and place the strongest constraints to date on the CP-odd Wilson coefficient ${c}_{H\overset{\sim }{W}}$ .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe 2-x V x (PO 4 )(SO 4 ) 2

Sodium (Na) super ionic conductor (NASICON) polyanionic compounds have recently attracted much attention from the battery community because of their electroactive properties and reasonably high ionic conductivities, leading to their use as a cathode in sodium-ion batteries. This article describes the compositional optimizations, crystallographic evaluations, and electrochemical behavior of a new mixed NASICON polyanionic compound, NaFe 2-x V x (PO 4 )(SO 4 ) 2 . By doping the characteristic Fe 3+ sites of the FeO 6 octahedrons with varying amounts of V 3+ , the electrochemical stability and charge transport in NaFe 2 (PO 4 )(SO 4 ) 2 were enhanced. The resulting best composition, with crystal structure NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 resolved through the Rietveld method, exhibited a stable capacity compared with the other synthesized compositions. In situ powder x-ray diffraction measurements, a single-phase intercalation/deintercalation mechanism of the NASICON structure in the measured sodium concentration window was observed with no impurity phase formation. Further electrochemical assessments revealed the interfacial charge transfer kinetics to be the rate-limiting step in the sodium concentration window. Also, the measured sodium-ion diffusivity values in the range of 6 × 10 -11 to 7 × 10 -11 cm 2 /s in the measured sodium concentration range. The results reported here highlight the potential of compositionally and morphologically optimized NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 with higher particle surface areas as a cathode material for high-performance sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Speciated non-methane hydrocarbon measurements at the Oliktok Point, AK AMF3 from February-March 2020

This dataset contains speciated non-methane hydrocarbon gas-phase mole ratio measurements at the Oliktok Point, AK AMF3 as measured by a Tofwerk Vocus-2R time-of-flight NO+ chemical ionization mass spectrometer (TOF-NO+-CIMS) coupled with an Aerodyne gas chromatograph (GC). Users of the data are asked to contact PI Pratt prior to use for consultation, best data use, discussion of co-authorship, and to ensure that the most up-to-date information is provided.

benzene↗
DOE OSTI2025

Correlation between complex spin textures and the magnetocaloric and Hall effects in Eu⁢(Ga 1−𝑥 ⁢Al 𝑥 ) 4 (𝑥=0.9, 1)

Determining the electronic phase diagram of a quantum material as a function of temperature (𝑇) and applied magnetic field (𝐻) forms the basis for understanding the microscopic origin of transport properties, such as the anomalous Hall effect (AHE) and topological Hall effect (THE). For many magnetic quantum materials, including Eu⁢Al 4 , a THE arises from a topologically protected magnetic skyrmion lattice with a nonzero scalar spin chirality. We identified a square skyrmion lattice (sSkL) peak in Eu⁢(Ga 1−𝑥 ⁢Al 𝑥 ) 4 (𝑥=0.9) identical to the peak previously observed in Eu⁢Al 4 by performing neutron-scattering measurements throughout the phase diagram. Here, comparing these neutron results with transport measurements, we found that in both compounds the maximal THE does not correspond to the sSkL area. Instead of the maximal THE, the maximal magnetocaloric-effect boundaries better identify the sSkL lattice phase observed by neutron-scattering measurements. The maximal THE therefore arises from interactions of itinerant electrons with frustrated spin fluctuations in a topologically trivial magnetic state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Measurement of the Hugoniot and shock-induced phase transition stress in wrought 17-4 PH H1025 stainless steel

Uniaxial strain, reverse-ballistic impact experiments were performed on wrought 17-4 PH H1025 stainless steel, and the resulting Hugoniot was determined to a peak stress of 25 GPa through impedance matching to known standard materials. The measured Hugoniot showed evidence of a solid–solid phase transition, consistent with other martensitic Fe-alloys. The phase transition stress in the wrought 17-4 PH H1025 stainless steel was measured in a uniaxial strain, forward-ballistic impact experiment to be 11.4 GPa. Linear fits to the Hugoniot for both the low and high pressure phase are presented with corresponding uncertainty. The low pressure martensitic phase exhibits a shock velocity that is weakly dependent on the particle velocity, consistent with other martensitic Fe-alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the Lineshapes of Temperature-Dependent Transport Measurements of Superconductors Under Pressure

Recent reports of superconductivity in the vicinity of room temperature have been the subject of discussion by the community. Specifically, features in the resistance-temperature (R-T) relations have raised questions. We show that many of these features can arise from previously unaccounted-for dynamic effects associated with the AC transport techniques often used in high- pressure experiments. These dynamic AC effects can cause the apparent resistance (R apparent ) to diverge from the DC resistance (R DC ), sharpen measured superconducting transitions, and produce other features in the measured R-T response. Here, we also show that utilizing the full output of phase-sensitive transport measurements provides a valuable probe of superconducting samples in difficult-to-measure systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Surveying Phase Modifier Functional Groups for Applications to Ln(III) Separations

The application of N,N,N',N'-tetraoctyl diglycolamide (TODGA) in solvent extraction systems for lanthanide (Ln) separations is well understood. In these systems, the formation of a third phase has motivated the use of phase modifiers to enable higher concentrations of H + and Ln common to industrial processes. Several different phase modifiers with applications to diglycolamide (DGA) systems have previously been reported, with a focus on tri-n-butyl phosphate (TBP), N,N'-dihexylactanamide (DHOA), N,N-dioctyl-2-hydroxyacetamide (DOHyA), N,N'-dimethyl-N,N'-dioctylhexylethoxy malonamide (DMDOHEMA), and octanol. While the primary utility of phase modifiers is the increased metal loading, they can have significant effects on the metal distribution ratios, which are well described by the energetics of the extraction process itself. However, the mechanisms by which phase modifiers impact distribution ratios are not generally understood. This work considers the ability of phase modifiers to affect Ln distribution ratios by using phase modifiers with two different functional groups (–Cl and –C≡N) and an octyl alkyl chain in a TODGA and n-dodecane system. Determining the effect of chlorooctane and octane nitrile is important for understanding how phase modifier functional groups and their hydrogen bonding interactions affect Ln extraction. Through combining distribution ratio measurements with organic phase spectroscopic investigations, the impact of chlorooctane and octane nitrile on Ln extraction and their inner-sphere complexes is reported. The addition of either chlorooctane or octane nitrile to TODGA in n-dodecane decreases Ln extraction while maintaining the same inner-sphere Ln complex. The lack of change in inner-sphere Ln-TODGA coordination upon incorporation of phase modifiers and the significant impact of these phase modifiers on distribution ratios suggest the importance of a supramolecular structure. Understanding the role of chlorooctane and octane nitrile on the organic phase structure at longer length scales has been identified as an avenue for future investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

STEM Ptychographic Holography of Electric and Magnetic Potentials

The development of fast an efficient direct electron imaging detectors have enabled the advancement of phase-imaging techniques in STEM such as iterative ptychography. As beneficial as these techniques are to imaging phase objects, the information recorded in the raw data is due to phase gradients across the probe, so it can be challenging to reconstruct slowly varying phase at lower spatial frequencies such as those induced by electric or magnetic potentials within the specimen. STEM holography [1,2] is an interferometric 4D-STEM technique where electrons in the beam are coherently divided into a superposition of two or more spatially separated probes which are then scanned over the specimen. For example, in a two-beam superposition, the two probes form overlapping bright field discs at the detector which then interfere (left of Fig. 1). Furthermore, if one probe passes through vacuum while the other transmits through the specimen, the resulting relative phase shift can be measured by recording shifts in the interference pattern. STEM holography is thus directly sensitive to the phase of the probe relative to the reference beam, and this phase can be measured regardless of the convergence angle of the probe, unlike single beam ptychography.

Biological Sciences↗
DOE OSTI2020

Order-disorder versus displacive transitions in Jahn-Teller active layered materials

Large anharmonic vibrations often play a crucial role in dynamically stabilizing crystalline phases whose structures are unstable at low temperature. Although the average structure of such phases can be measured through diffraction experiments, their local structure remains a challenge to characterize and understand. Dynamically stabilized phases are often classified as order/disorder or displacive based on the qualitative nature of their local structure. A robust understanding of how chemistry determines this distinction in behavior, however, is lacking. This article presents a parametric study of an anharmonic vibrational model that describes the transition from a cooperative to a noncooperative Jahn-Teller distortion in layered oxides—a class of materials widely used in Li-ion and Na-ion batteries. The results illustrate how the shape of the energy landscape determines the extent to which the high-temperature phase has order/disorder vs displacive character. In this work, we find that the nature of the high-temperature phase is determined by a competition between the strength of the elastic coupling between Jahn-Teller distortions at nearby sites and the energy scale driving the Jahn-Teller distortion. A comparison of the model to energy landscapes calculated with density-functional theory suggests that the high-temperature phases of the Jahn-Teller active layered compounds LiNiO 2 , NaNiO 2 , LiMnO 2 , and NaMnO 2 exhibit order/disorder character.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantitative spatiotemporal density evolution of aluminum heated purely by monochromatic electrons

A spatially resolved air-wedge shearing interferometer and shadowgraph diagnostic provides measurements of electron density with a resolution of ∼40 μm. A ∼100-ns-long, monoenergetic electron bunch at 19.8 MeV and a current of 1.4 kA (8.5×1014 e−) heats 100-μm-thick aluminum (Al) foils in a 1-mm-spot to Te∼1 eV. A 5-ns-long, ∼60 mJ, frequency doubled Nd:YAG laser probes the dense Al plasma. Electron densities up to 1020cm−3 are resolved; the maximum resolvable density is limited by opacity, transmission, and spatial fringe density achievable with the detector. This diagnostic provides measurements of the total phase shift, transmission, and electron density. Several measurements at different time slices provide the ability to determine the velocity of the leading edge of the shadowgraph and compare it to the motion of different density shells. These measurements are also compared to radiation hydrodynamics simulations. A rough quantitative agreement is shown between the hydro simulations and the measurements; there are differences in the exact density distributions.

Coleman, J. E. (ORCID:0000000308873757)↗
DOE OSTI2021

Venus Observations at 40 and 90 GHz with CLASS

Using the Cosmology Large Angular Scale Surveyor, we measure the disk-averaged absolute Venus brightness temperature to be 432.3 ± 2.8 K and 355.6 ± 1.3 K in the Q and W frequency bands centered at 38.8 and 93.7 GHz, respectively. At both frequency bands, these are the most precise measurements to date. Furthermore, we observe no phase dependence of the measured temperature in either band. Our measurements are consistent with a CO 2 -dominant atmospheric model that includes trace amounts of additional absorbers like SO 2 and H 2 SO 4 .

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Particle Dynamics in a Diblock-Copolymer-Based Dodecagonal Quasicrystal and Its Periodic Approximant by X-Ray Photon Correlation Spectroscopy

Temperature-dependent X-ray photon correlation spectroscopy (XPCS) measurements are reported for a binary diblock copolymer blend that self-assembles into an aperiodic dodecagonal quasicrystal (DDQC) and a periodic Frank-Kasper σ phase approximant. The measured structural relaxation times are Bragg scattering wavevector-independent and are five times faster in the DDQC than the σ phase, with minimal temperature dependence. Further, the underlying dynamical relaxations are ascribed to differences in particle motion at the grain boundaries within each of these tetrahedrally close-packed assemblies. These results identify unprecedented particle dynamics measurements of tetrahedrally-coordinated micellar block polymers, thus expanding the application of XPCS to ordered soft materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Examination of the cerium α-ε phase transition under dynamic loading with x-ray diffraction

Recent examination of the cerium Hugoniot with pyrometry and x-ray diffraction (XRD) has revealed a narrow solid-liquid two-phase region. It has been suggested that nonequilibrium melting may be occurring along the Ce Hugoniot, with either melt kinetics or a sluggish α-ε transition impeding the transition. In particular, the kinetics of the α-ε is unknown and the location of the phase boundary is in dispute. Static measurements suggest a nearly vertical phase boundary that intersects the Hugoniot at 6–7 GPa. This lies in direct conflict with dynamic measurements along the Hugoniot observing α-Ce through incipient melt. This work presents dynamic experiments using XRD to examine the behavior of the α-ε phase transition. The results show that the α-ε phase transition occurs through a tetragonal distortion, with the transition beginning at temperatures below the solid Hugoniot. Following the initial deviation from an ideal fcc structure, the c/a ratio is found to gradually increase with no steady value observed in the ε phase within the range of these experiments (below 17 GPa). Multiple diffraction patterns captured during the peak stress state show no significant change in c/a ratio prior to uniaxial release, upon which Ce reverts to an fcc structure. Furthermore, the results indicate that the α-ε transition occurs rapidly, both on loading and release. An examination of the c/a ratio with increasing temperatures suggests 11.5 GPa as a lower bound for the location of the α-ε-liquid triple point.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗