Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxide activation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Developing single-site Pt catalysts for the preferential oxidation of CO: A surface science and first principles-guided approach

Here, we report a comprehensive study combining surface science, Density Functional Theory (DFT) calculations, and catalyst synthesis, characterization, and testing to investigate the preferential oxidation of CO in the presence of H 2 over single-site Pt 1 /Cu x O catalysts. Surface science studies show that while Pt 1 /Cu x O model surfaces enable low-temperature CO oxidation via a Mars-van Krevelen mechanism, there was no evidence for H 2 activation or oxidation. DFT-based calculations explain these results and demonstrate that the H 2 oxidation barrier is high as compared to H 2 desorption from Pt 1 /Cu x O. Inspired by these model catalyst studies, nanoporous Pt 1 /Cu x O catalysts were synthesized and demonstrated to be active and highly selective for the preferential oxidation of CO. This work highlights the potential of combined surface science, theory, and catalyst studies for identifying new catalytic materials, which in this case led to the development of a promising single-site Pt 1 /Cu x O catalyst for the preferential oxidation of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stability of Mn-Doped TiO 2 Thin-Film Anodes during Water Oxidation Reactions

Incorporating manganese atoms into TiO 2 has been shown to improve its activity for water oxidation. However, its activity has been observed to steadily degrade under constant applied potential, especially at more oxidizing applied potentials. Here, the compositional profile and electrochemical stability of Mn-doped TiO 2 (Mn:TiO 2 ) thin-film electrodes precisely fabricated by atomic layer deposition (ALD) were evaluated to elucidate the mechanisms of electrode degradation. Although ALD enables the deposition of Mn dopants throughout the film thickness, only Mn within 1.5 nm of the surface was observed to be redox active. Annealing Mn:TiO 2 films in air leads to the diffusion of Mn toward the electrode surface and oxidation of the Mn and alters the redox behavior. Annealing endows greater stability to Mn redox behavior but does not fully stabilize the water oxidation current, suggesting that the two electrochemical processes are not precisely correlated. In situ inductively coupled plasma mass spectrometry reveals that Mn is lost from Mn:TiO 2 films at potentials greater than 1.8 V vs RHE. However, the initial Mn loss is equivalent to less than a single ALD layer of MnO x . Longer-term constant potential experiments suggest that Mn is lost from up to 1 nm of the electrode surface but that this loss may account for only a portion of the diminished water oxidation activity.

atomic layer deposition↗
DOE OSTI2024

Redox dynamics and surface structures of an active palladium catalyst during methane oxidation

Catalysts based on palladium are among the most effective in the complete oxidation of methane. Despite extensive studies and notable advances, the nature of their catalytically active species and conceivable structural dynamics remains only partially understood. Here, we combine operando transmission electron microscopy (TEM) with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations to investigate the active state and catalytic function of Pd nanoparticles (NPs) under methane oxidation conditions. We show that the particle size, phase composition and dynamics respond appreciably to changes in the gas-phase chemical potential. In combination with mass spectrometry (MS) conducted simultaneously with in situ observations, we uncover that the catalytically active state exhibits phase coexistence and oscillatory phase transitions between Pd and PdO. Aided by DFT calculations, we provide a rationale for the observed redox dynamics and demonstrate that the emergence of catalytic activity is related to the dynamic interplay between coexisting phases, with the resulting strained PdO having more favorable energetics for methane oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Breaking Simple Scaling Relations through Metal–Oxide Interactions: Understanding Room-Temperature Activation of Methane on M/CeO 2 (M = Pt, Ni, or Co) Interfaces

The clean activation of methane at low temperatures remains an eminent challenge and a field of competitive research. In particular, on late transition metal surfaces such as Pt(111) or Ni(111), higher temperatures are necessary to activate the hydrocarbon molecule, but a massive deposition of carbon makes the metal surface useless for catalytic activity. However, on very low-loaded M/CeO 2 (M = Pt, Ni, or Co) surfaces, the dissociation of methane occurs at room temperature, which is unexpected considering simple linear scaling relationships. This intriguing phenomenon has been studied using a combination of experimental techniques (ambient-pressure X-ray photoelectron spectroscopy, time-resolved X-ray diffraction, and X-ray absorption spectroscopy) and density functional theory-based calculations. The experimental and theoretical studies show that the size and morphology of the supported nanoparticles together with strong metal–support interactions are behind the deviations from the scaling relations. These findings point toward a possible strategy for circumventing scaling relations, producing active and stable catalysts that can be employed for methane activation and conversion.

03 NATURAL GAS↗
DOE OSTI2026

Unraveling Fundamental Activity–Stability Relationships in Rutile Oxides

The oxygen evolution reaction (OER) is a key anodic half-cell reaction that accompanies several critical electrochemical reduction reactions of interest to a variety of applications. Despite steady advances in understanding and qualitatively predicting OER activity and selectivity trends, a comprehensive description or prediction of material aqueous (in)stability and degradation mechanisms remains elusive, even though these processes critically influence device lifetime and economic feasibility. In this work, we investigate the interplay, or lack thereof, between OER activity and material aqueous stability across rutile oxides, with a particular focus on iridium oxide (IrO 2 ). By applying a Born–Haber cycle, we calculate the thermodynamic driving force for metal dissolution as a function of the applied bias and electrolyte conditions. We apply interpretable machine learning techniques, including principal component analysis and symbolic regression, to analyze trends across rutile oxides and find that key thermodynamic descriptors for OER activity and surface stability are only very weakly correlated. Instead, the local atomic environment─especially electronic structure signatures for interactions between the active site and its neighbors─plays a more important role in predicting material stability. Leveraging these insights, we investigate the impact of doping IrO 2 with a range of transition metals and show that the stability of Ir active sites can be tuned largely independently of its predicted OER activity. These insights lay the foundation for material design to improve stability with respect to corrosion, with the ultimate aim to enhance long-term stability without sacrificing catalytic performance in the OER.

evolution reactions↗
DOE OSTI2025

Single-Phase Spinel NiCo 2 O 4 as Highly Active and Stable Electrocatalysts for Urea Oxidation Reaction in Urea Electrolysis

Exploring and designing a stable and active catalyst for the urea electro-oxidation reaction (UOR, CO(NH 2 ) 2 + 6OH – → CO 2 + N 2 + 5H 2 O + 6e – ) is crucial for the long-term sustainability of ecological systems and clean energy production. We found that spinel NiCo 2 O 4 is a stable and active electrocatalyst for UOR at a relatively low anodic potential without triggering the competing oxygen evolution reaction (OER). A urea electrolysis cell (CO(NH 2 )2 + H 2 O → CO 2 + N 2 + 2H 2 ) utilizing a spinel NiCo 2 O 4 anode and a commercial Pt cathode was further characterized through galvanostatic polarization tests, demonstrating excellent structural stability at various current densities. Post-mortem analysis of long-term urea electrolysis measurements suggested that NiCo 2 O 4 electrocatalysts maintained a stable spinel structure. However, redistribution of Ni 3+ to Ni 2+ valence on the catalyst surface was observed, in contrast to the intact Co valence, indicating that (i) Ni sites are active toward urea adsorption and sequential electro-oxidation; (ii) while urea oxidation proceeds primarily through the direct electro-oxidation mechanism, chemical reactions between the Ni 3+ site and urea occur during long-term electrochemical UOR operation. Density functional theory (DFT) simulations were used to calculate the adsorption energies of urea molecules on NiO, Co 3 O 4 , and NiCo 2 O 4 , revealing the importance of regulating the configuration of adsorbed urea molecules on the NiCo 2 O 4 surface.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanoscale Spatial Distribution of Supported Nanoparticles Controls Activity and Stability in Powder Catalysts for CO Oxidation and Photocatalytic H 2 Evolution

Here we discuss, supported metal nanoparticles are essential components of high-performing catalysts, and their structures are intensely researched. In comparison, nanoparticle spatial distribution in powder catalysts is conventionally not quantified, and the influence of this collective property on catalyst performance remains poorly investigated. Here, we demonstrate a general colloidal self-assembly method to control uniformity of nanoparticle spatial distribution on common industrial powder supports. We quantify distributions on the nanoscale using image statistics and show that the type of nanospatial distribution determines not only the stability, but also the activity of heterogeneous catalysts. Widely investigated systems (Au–TiO 2 for CO oxidation thermocatalysis and Pd–TiO 2 for H 2 evolution photocatalysis) were used to showcase the universal importance of nanoparticle spatial organization. Spatially and temporally resolved microkinetic modeling revealed that nonuniformly distributed Au nanoparticles suffer from local depletion of surface oxygen, and therefore lower CO oxidation activity, as compared to uniformly distributed nanoparticles. Nanoparticle spatial distribution also determines the stability of Pd–TiO 2 photocatalysts, because nonuniformly distributed nanoparticles sinter while uniformly distributed nanoparticles do not. This work introduces new tools to evaluate and understand catalyst collective (ensemble) properties in powder catalysts, which thereby pave the way to more active and stable heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

YC-1 activation of human soluble guanylyl cyclase has both heme-dependent and heme-independent components

YC-1 [3-(5'-hydroxymethyl-2'furyl)-1-benzyl indazole] is an allosteric activator of soluble guanylyl cyclase (sGC). YC-1 increases the catalytic rate of the enzyme and sensitizes the enzyme toward its gaseous activators nitric oxide or carbon monoxide. In other studies the administration of YC-1 to experimental animals resulted in the inhibition of the platelet-rich thrombosis and a decrease of the mean arterial pressure, which correlated with increased cGMP levels. However, details of YC-1 interaction with sGC and enzyme activation are incomplete. Although evidence in the literature indicates that YC-1 activation of sGC is strictly heme-dependent, this report presents evidence for both heme-dependent and heme-independent activation of sGC by YC-1. The oxidation of the sGC heme by 1H-(1,2,4)oxadiazole(4,3-a)quinoxalin-1-one completely inhibited the response to NO, but only partially attenuated activation by YC-1. We also observed activation by YC-1 of a mutant sGC, which lacks heme. These findings indicate that YC-1 activation of sGC can occur independently of heme, but that activation is substantially increased when the heme moiety is present in the enzyme.

NASA Discipline Cardiopulmonary↗
DOE OSTI2024

Structural mode coupling in perovskite oxides using hypothesis-driven active learning

Abstract Finding the ground-state structure with minimum energy is paramount to designing any material. In ABO 3 -type perovskite oxides with Pnma symmetry, the lowest energy phase is driven by an inherent trilinear coupling between the two primary order parameters such as rotation and tilt with antiferroelectric displacement of the A-site cations as established via hybrid improper ferroelectric mechanism. Conventionally, finding the relevant mode coupling driving phase transition requires performing first-principles calculations which is computationally time-consuming as well as expensive. It involves following an intuitive iterative hit and trial method of (a) adding two or multiple mode vectors, followed by (b) evaluating which combination would lead to the ground-state energy. In this study, we show how a hypothesis-driven active learning framework can identify suitable mode couplings within the Landau free energy expansion with minimal information on amplitudes of modes for a series of double perovskite oxides with A-site layered, columnar and rocksalt ordering. This scheme is expected to be applicable universally for understanding atomistic mechanisms derived from various structural mode couplings behind functionalities, for e.g. polarization, magnetization and metal–insulator transitions.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Active-to-passive transition in the oxidation of silicon carbide and silicon nitride in air

The active-to-passive transition in the oxidation of SiC and Si3N4 was determined in a flowing air environment as a function of temperature and total pressure. The experimentally observed transition temperatures ranged from a low of 1347 C to a high of 1543 C for partial pressures of oxygen of 2.5 and 123.2 Pa, respectively. The SiC and Si3N4 samples had approximately the same transition point for a given pressure. In general, the higher the flow rate, the higher the transition temperature for a given pressure. The transitions for SiC measured in this study agree with previous data for the transition of SiC measured in pure oxygen at reduced pressures and in oxygen inert gas mixtures.

Vaughn, Wallace L.↗
DOE OSTI2021

The Effect of Material Properties on Oxygen Evolution Activity and Assessing Half-Cell Screening as a Predictive Tool in Electrolysis

Iridium-based oxygen evolution catalysts are screened in this study for activity and stability with rotating disk electrode (RDE) half-cells. This study focuses on the electrochemical and materials approaches needed to characterize oxygen evolution catalysts, and include testing for activity, stability, composition, oxide content, and structure. Findings also discuss recommendations for data interpretation and detail the difficulties of comparing catalysts across materials sets with different elemental and oxide compositions, and linking RDE activity to device-level performance. The materials evaluated are a mixture of oxides and metals, and several methods are used to quantify metal content, qualitatively assess oxide content, and determine total surface area. Oxygen evolution activities and stabilities are compared, where a wide range of results are reported. In general, higher RDE performances are found for catalysts that contained larger amounts of ruthenium and metals. Higher durability, however, is found for catalysts that only contained iridium and a higher proportion of oxides. Additionally, catalysts are evaluated for performance in membrane electrode assemblies to assess RDE as a predictive tool in electrolysis. While activity trends within individual material sets generally held between ex- and in-situ testing, RDE tends to overestimate the activity of more metallic catalysts when compared to device-level performance. These results stress the need for multiple metal/oxide baselines for mixed catalysts, to better project in-situ kinetics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Graphite Oxidation Studies Irradiated Graphite, GIF Summary, ASME Task Force, ASTM Activities

Introduction Comparison of Graphite Oxidation Rates for Irradiated and Unirradiated NBG-25 (Rebecca Smith and Austin Matthews, INL) Annealing effect over range of oxidation temperatures Irradiation effect (~6.5 dpa) over range of oxidation temperatures Dose dependency of irradiation effect Generation IV International Forum High Level Deliverable Summary of DOE ART Historic Oxidation Research (Cristian Contescu, ORNL) Publications issued over the last ~10 years Acute and chronic oxidation ASME Graphite Oxidation Task Force (C. Contescu, Paul Ryan, ORNL, Joe Bass, A. Matthews, R. Smith, INL) Collaborative effort headed by ORNL and engaging INL and others Initial review of relevant oxidation discussion in ASME code ASTM Activities (C. Contescu) Virtual Meetings New and Revised Standards

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

On the thermal coarsening and transformation of nanoscale oxide inclusions in 316L stainless steel manufactured by laser powder bed fusion and its influence on impact toughness

The thermal evolution of nanoscale oxide inclusions in 316L stainless steel (SS) manufactured by laser powder bed fusion additive manufacturing (AM) was explored. The size, chemical composition, morphology, and distribution of the oxides were characterized as the function of heat treatment conditions. The study revealed the mechanistic driving force of the rapid oxide coarsening during recrystallization. Ostwald ripening governs oxide coarsening. The active grain boundary-oxide interaction at the early stage of recrystallization accelerated oxide coarsening via enhanced solute diffusion along grain boundaries. Pipe diffusion along dislocation cellular boundaries has a negligible contribution to oxide coarsening. At high temperatures (T> 1065 °C), although lattice diffusion primarily controlled the oxide growth, the contribution from the grain-boundary diffusion was necessary. The transformation from MnSiO 3 to CrMn 2 O 4 took place in the un-recrystallized grains but was not observed when recrystallization started. The interaction of grain boundary and oxides during recrystallization resulted in a high fraction of oxides accumulated at grain boundaries. While oxide coarsening does not significantly alter the toughness value, grain-boundary oxides promote microvoid formation and intergranular fracture under Charpy impact in the recrystallized AM 316L SS.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Stable and Catalytically Active Shape-Engineered Cerium Oxide Nanorods by Controlled Doping of Aluminum Cations

Shape-engineered nanocrystals (SENs) promise a better selectivity and a higher activity in catalytic reactions than the corresponding non-shape-engineered ones because of their larger specific surface areas and desirable crystal facets. However, often, it is challenging to apply SENs in practical catalytic applications at high reaction temperatures, where SENs deforms into more stable, less active nanoparticles. In this paper, we show that atomic layer deposition (ALD) of Al 2 O 3 at 200 °C can controllably dope Al cations into the shape-engineered CeO 2 nanorods (NRs) to not only increase their shape transition temperature from 400 °C to beyond 700 °C but also greatly increase their specific reversible oxygen storage capacity (srOSC). Furthermore, the substituted Al3+ ions impede the surface diffusion of Ce ions and therefore improve the thermal stability of CeO 2 NRs. These Al3+ dopants form -Al–O–Ce–O– clusters, which are new Ce species and can be reversibly reduced and oxidized at 500–700 °C. This low-temperature chemical doping method decouples the synthesis process of SENs from the doping process and maintains the shape of the SENs during the activation of dopants. This concept could be adopted to enable the applications of other SENs in challenging high-temperature environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Succinate dehydrogenase activity and soma size of motoneurons innervating different portions of the rat tibialis anterior

The spatial distribution, soma size and oxidative enzyme activity of gamma and alpha motoneurons innervating muscle fibres in the deep (away from the surface of the muscle) and superficial (close to the surface of the muscle) portions of the tibialis anterior in normal rats were determined. The deep portion had a higher percentage of high oxidative fibres than the superficial portion of the muscle. Motoneurons were labelled by retrograde neuronal transport of fluorescent tracers: Fast Blue and Nuclear Yellow were injected into the deep portion and Nuclear Yellow into the superficial portion of the muscle. Therefore, motoneurons innervating the deep portion were identified by both a blue fluorescent cytoplasm and a golden-yellow fluorescent nucleus, while motoneurons innervating the superficial portion were identified by only a golden-yellow fluorescent nucleus. After staining for succinate dehydrogenase activity on the same section used for the identification of the motoneurons, soma size and succinate dehydrogenase activity of the motoneurons were measured. The gamma and alpha motoneurons innervating both the deep and superficial portions were located primarily at L4 and were intermingled within the same region of the dorsolateral portion of the ventral horn in the spinal cord. Mean soma size was similar for either gamma or alpha motoneurons in the two portions of the muscle. The alpha motoneurons innervating the superficial portion had a lower mean succinate dehydrogenase activity than those innervating the deep portion of the muscle. An inverse relationship between soma size and succinate dehydrogenase activity of alpha, but not gamma, motoneurons innervating both the deep and superficial portions was observed. Based on three-dimensional reconstructions within the spinal cord, there were no apparent differences in the spatial distribution of the motoneurons, either gamma or alpha, associated with the deep and superficial compartments of the muscle. The data provide evidence for an interdependence in the oxidative capacity between a motoneuron and its target muscle fibres in two subpopulations of motoneurons from the same motor pool, i.e. the same muscle.

NASA Discipline Musculoskeletal↗
NASA NTRS1989

Observations and theories related to Antarctic ozone changes

In 1985, there was a report of a large, sudden, and unanticipated decrease in the abundance of springtime Antarctic ozone over the last decade. By 1987, ozone decreases of more than 50 percent in the total column, and 95 percent locally between 15 and 20 km, had been observed. The scientific community quickly rose to the challenge of explaining this remarkable discovery; theoreticians soon developed a series of chemical and dynamical hypotheses to explain the ozone loss. Three basic theories were proposed to explain the springtime ozone hole. (1) The ozone hole is caused by the increasing atmospheric loadings of manmade chemicals containing chlorine (chlorofluorocarbons (CFC's) and bromine (halons)). These chemicals efficiently destroy ozone in the lower stratosphere in the Antarctic because of the special geophysical conditions, of an isolated air mass (polar vortex) with very cold temperatures, that exist there. (2) The circulation of the atmosphere in spring has changed from being predominantly downward over Antarctica to upward. This would mean that ozone poor air from the troposphere, instead of ozone rich air from the upper stratosphere, would be transported into the lower Antarctic stratosphere. (3) The abundance of the oxides of nitrogen in the lower Antarctic stratosphere is periodically enhanced by solar activity. Nitrogen oxides are produced in the upper mesosphere and thermosphere and then transported downward into the lower stratosphere in Antarctica, resulting in the chemical destruction of ozone. The climatology and trends of ozone, temperature, and polar stratospheric clouds are discussed. Also, the transport and chemical theories for the Antarctic ozone hole are presented.

Hartmann, D.↗
DOE OSTI2022

Investigation of Ni catalyst activation during plasma-assisted methane oxidation

Atmospheric pressure plasma has shown promise in improving thermally activated catalytic reactions through a process termed plasma-catalysis synergy. In this work, we investigated atmospheric pressure plasma jet (APPJ)-assisted CH 4 oxidation over a Ni/SiO 2 .Al 2 O 3 catalyst. Downstream gas-phase products from CH 4 conversion were quantified by Fourier transform infrared spectroscopy. The catalyst near-surface region was characterized by in-situ diffuse reflectance infrared Fourier transform spectroscopy. The catalyst was observed to be activated at elevated temperature (500 °C) if it was exposed to the APPJ operated at large plasma power. 'Catalyst activation' signifies that the purely thermal conversion of CH 4 using catalysts which had been pre-exposed to plasma became more intense and produced consistently CO product, even if the plasma was extinguished. Without the application of the APPJ to the Ni catalyst surface this was not observed at 500 °C. The study of different exposure conditions of the activated catalyst indicates that the reduction of the catalyst by the APPJ is likely the cause of the catalyst activation. We also observed a systematic shift of the vibrational frequency of adsorbed CO on Ni catalyst when plasma operating conditions and catalyst temperatures were varied and discussed possible explanations for the observed changes. Furthermore, this work provides insights into the plasma-catalyst interaction, especially catalyst modification in the plasma catalysis process, and potentially demonstrates the possibility of utilizing the surface CO as a local probe to understand the plasma-catalyst interaction and shed light on the complexity of plasma catalysis.

methane oxidation↗
DOE OSTI2021

Regeneration of Active Surface Alloys during Cyclic Oxidation and Reduction: Oxidation of H 2 on Pd/Ag(111)

The surface morphology and composition of a catalyst during excursions between oxidizing and reducing conditions can change substantially, especially in bimetallic alloys. Both thermodynamic and kinetic factors play a role in determining the properties of alloy surfaces where the active phase may be a metastable state. Previously, Ag oxide reduction was shown to be dramatically enhanced when Pd is on the surface; however, Pd is more stable when dissolved in Ag, raising the question as to whether a highly active Pd surface state will persist over multiple reaction cycles—a requirement for catalytic function. Experiments herein demonstrate that the enhanced chemical functionality due to the presence of Pd on the surface is retained, based on the enhanced rate of silver oxide reduction over multiple oxidation/reduction cycles for a Pd/Ag(111) model. Repeated oxidation and reduction promote PdAg alloying and reversible structural and compositional changes are detected using X-ray photoelectron spectroscopy. Furthermore, this study establishes that metastable phases can persist in reactive processes on surfaces, indicating their potential in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗