Optical analysis for laser heterodyne communication system
Explore the source record for details and available documents.
Nussmeier, T. A.↗
SEARCH · Engineering Papers
Results for “optical communication systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A review of electron bombardment thruster systems/spacecraft field and particle interfaces
Information on the field and particle interfaces of electron bombardment ion thruster systems was summarized. Major areas discussed were the nonpropellant particles, neutral propellant, ion beam, low energy plasma, and fields. Spacecraft functions and subsystems reviewed were solar arrays, thermal control systems, optical sensors, communications, science, structures and materials, and potential control.
Byers, D. C.↗
A review of electron bombardment thruster systems/spacecraft field and particle interfaces
This paper collates and summarizes information on the field and particle interfaces of electron bombardment ion thruster systems. Major areas discussed are the nonpropellant particles, neutral propellant, ion beam, low energy plasma, and fields. Spacecraft functions and subsystems reviewed are solar arrays, thermal control systems, optical sensors, communications, science, structures and materials, and potential control. An appendix is included to facilitate identification of specific interaction areas.
Byers, D. C.↗
Optical communication with semiconductor laser diodes
Slot timing recovery in a direct detection optical PPM communication system can be achieved by processing the photodetector waveform with a nonlinear device whose output forms the input to a phase lock group. The choice of a simple transition detector as the nonlinearity is shown to give satisfactory synchronization performance. The rms phase error of the recovered slot clock and the effect of slot timing jitter on the bit error probability were directly measured. The experimental system consisted of an AlGaAs laser diode (lambda = 834 nm) and a silicon avalanche photodiode (APD) photodetector and used Q=4 PPM signaling operated at a source data rate of 25 megabits/second. The mathematical model developed to characterize system performance is shown to be in good agreement with actual performance measurements. The use of the recovered slot clock in the receiver resulted in no degradation in receiver sensitivity compared to a system with perfect slot timing. The system achieved a bit error probability of 10 to the minus 6 power at received signal energies corresponding to an average of less than 60 detected photons per information bit.
Davidson, F.↗
Performance Dependences of Multiplication Layer Thickness for InP/InGaAs Avalanche Photodiodes Based on Time Domain Modeling
InP/InGaAs avalanche photodiodes (APDs) are being widely utilized in optical receivers for modern long haul and high bit-rate optical fiber communication systems. The separate absorption, grading, charge, and multiplication (SAGCM) structure is an important design consideration for APDs with high performance characteristics. Time domain modeling techniques have been previously developed to provide better understanding and optimize design issues by saving time and cost for the APD research and development. In this work, performance dependences on multiplication layer thickness have been investigated by time domain modeling. These performance characteristics include breakdown field and breakdown voltage, multiplication gain, excess noise factor, frequency response and bandwidth etc. The simulations are performed versus various multiplication layer thicknesses with certain fixed values for the areal charge sheet density whereas the values for the other structure and material parameters are kept unchanged. The frequency response is obtained from the impulse response by fast Fourier transformation. The modeling results are presented and discussed, and design considerations, especially for high speed operation at 10 Gbit/s, are further analyzed.
Xiao, Yegao↗
Error Rates and Channel Capacities in Multipulse PPM
A method of computing channel capacities and error rates in multipulse pulse-position modulation (multipulse PPM) has been developed. The method makes it possible, when designing an optical PPM communication system, to determine whether and under what conditions a given multipulse PPM scheme would be more or less advantageous, relative to other candidate modulation schemes. In conventional M-ary PPM, each symbol is transmitted in a time frame that is divided into M time slots (where M is an integer >1), defining an M-symbol alphabet. A symbol is represented by transmitting a pulse (representing 1) during one of the time slots and no pulse (representing 0 ) during the other M 1 time slots. Multipulse PPM is a generalization of PPM in which pulses are transmitted during two or more of the M time slots.
Hamkins, Jon↗
Large High Performance Optics for Spaceborne Missions: L-3 Brashear Experience and Capability
Brashear is a division of L-3 Communications, Integrated Optical Systems. Brashear is well known for the ground-based telescopes it has manufactured at its facilities and delivered to satisfied customers. Optics from meter-class up to 8.3 meters diameter have been fabricated in Brashear's facilities. Brashear has demonstrated capabilities for large spaceborne optics. We describe in this paper both legacy and new Brashear capabilities for high performance spaceborne optics.
Canzian, Blaise↗
OPALS: Mission System Operations Architecture for an Optical Communications Demonstration on the ISS
In spring 2014, the Optical PAyload for Lasercomm Science (OPALS) will launch to the International Space Station (ISS) to demonstrate space-to-ground optical communications. During a 90-day baseline mission, OPALS will downlink high quality, short duration videos to the Optical Communications Telescope Laboratory (OCTL) in Wrightwood, California. To achieve mission success, interfaces to the ISS payload operations infrastructure are established. For OPALS, the interfaces facilitate activity planning, hazardous laser operations, commanding, and telemetry transmission. In addition, internal processes such as pointing prediction and data processing satisfy the technical requirements of the mission. The OPALS operations team participates in Operational Readiness Tests (ORTs) with external partners to exercise coordination processes and train for the overall mission. The tests have provided valuable insight into operational considerations on the ISS.
Abrahamson, Matthew J.↗
OPALS: Mission System Operations Architecture for an Optical Communications Demonstration on the ISS
No abstract available
External Payload↗
Fiber Optic Cables for Transmission of High-Power Laser Pulses in Spaceflight Applications
Lasers with high peak power pulses are commonly used in spaceflight missions for a wide range of applications, from LIDAR systems to optical communications. Due to the high optical power needed, the laser has to be located on the exterior of the satellite or coupled through a series of free space optics. This presents challenges for thermal management, radiation resistance, and mechanical design. Future applications will require multiple lasers located close together, which further complicates the design. Coupling the laser energy into a fiber optic cable allows the laser to be relocated to a more favorable position on the spacecraft. Typical fiber optic termination procedures are not sufficient for injection of these high-power laser pulses without catastrophic damage to the fiber endface. In the current study, we will review the causes of fiber damage during high-power injection and discuss our new manufacturing procedures that overcome these issues to permit fiber use with high reliability in these applications. We will also discuss the proper methods for launching the laser pulses into the fiber to avoid damage and how this is being implemented for current spaceflight missions.
Thomes, W. J., Jr.↗
Free Space Optics - Transportable Test Platform
The study examines potential approaches and benefits to government space agencies and industry regarding the development and testing of free space optics (FSO) satellite communication systems should government space agencies launch optical satellite payloads and/or develop a transportable test platform with which industry provided optical ground systems (OGSs) could interface. The study examines atmospheric and environmental effects on FSO networks, as well as the multitude of mitigation techniques available to compensate for those effects. Research suggests that there are a multitude of potential techniques that could be implemented to mitigate the adverse effects of atmospheric/environmental conditions, and to optimize the effectiveness of FSO networks. Testing and selection of this broad array of techniques is a prerequisite to making FSO space segment systems and OGSs interoperable. The study discusses testing that is required to define FSO standards. The establishment of interoperable standards is complicated by the existence of a multitude of potential schemes/specifications to address each mitigation/optimization challenge; very little is yet standardized. Standardization is further complicated by the fact that the selection of a design approach which benefits one consideration often disadvantages another consideration. Each mitigation techniques must be evaluated as an element of the complete system to gain an accurate understanding of its effects on system efficacy.
Haddad, George↗
Deep-space Optical Communications Pointing Control Design
This paper provides an overview of pointing control design for NASA’s Deep Space Optical Communications (DSOC) system. DSOC is NASA’s first deep-space laser communications system and includes both a ground system and a space terminal. This paper focus on the pointing control system design and related issues for the Flight Laser Transceiver (FLT), including its key subsystems and components that support the space terminal pointing and control, its operational concept and sequence design, and its control systems design and related analyses. The paper also provides an overview of the achievable system pointing performance that meets the DSOC pointing control design requirements.
Zhu, David↗
Hemispherical Optical Dome for Underwater Communication
For many years, acoustic systems have been used as the primary method for underwater communication; however, the data transfer rate of such systems is low because sound propagates slowly through the water. A higher throughput can be achieved using visible light to transmit data underwater. The first issue with using this approach is that there is generally a large loss of the light signal due to scattering and absorption in water even though there is an optimal wavelength for transmission in the blue or green wavelengths of the visible spectrum. The second issue is that a simple system consisting only of a highly directional source/transmitter and small optical detector/receiver has a very narrow field of view. The goal of this project is to improve an optical, underwater communication system by increasing the effective field of view of the receiving optics. To this end, we make two changes to the simple system: (1) An optical dome was added near the receiver. An array of lenses is placed radially on the surface of the dome, reminiscent of the compound eye of an insect. The lenses make the source and detector planes conjugate, and each lens adds a new region of the source plane to the instrument's total field of view. (2) The receiver was expanded to include multiple photodiodes. With these two changes, the receiver has much more tolerance to misalignments (in position and angle) of the transmitter.Two versions of the optical dome (with 6 and 8 diameters) were designed using the CREO CAD software and modeled using the CODE V optical design software. A series of these transparent hemispherical domes, with both design diameters, were manufactured using a 5-axis mill. The prototype was then retrofitted with lenses and compared with the computer-generated model to demonstrate the effectiveness of this solution. This work shows the dome design improves the optical field of view of the underwater communication system considerably. Furthermore, with the experimental test results, a geometric optimization model was derived providing insights to the design performance limits.
Underwater↗
Hemispherical Optical Dome for Underwater Communication
For many years, acoustic systems have been used as the primary method for underwater communication; however, the data transfer rate of such systems is low because sound propagates slowly through the water. A higher throughput can be achieved using visible light to transmit data underwater. The first issue with using this approach is that there is generally a large loss of the light signal due to scattering and absorption in water even though there is an optimal wavelength for transmission in the blue or green wavelengths of the visible spectrum. The second issue is that a simple system consisting only of a highly directional source transmitter and small optical detector receiver has a very narrow field of view. The goal of this project is to improve an optical, underwater communication system by increasing the effective field of view of the receiving optics. To this end, we make two changes to the simple system: (1) An optical dome was added near the receiver. An array of lenses is placed radially on the surface of the dome, reminiscent of the compound eye of an insect. The lenses make the source and detector planes conjugate, and each lens adds a new region of the source plane to the instrument's total field of view. (2) The receiver was expanded to include multiple photodiodes. With these two changes, the receiver has much more tolerance to misalignments (in position and angle) of the transmitter.Two versions of the optical dome (with 6 and 8 diameters) were designed using the CREO CAD software and modeled using the CODE V optical design software. A series of these transparent hemispherical domes, with both design diameters, were manufactured using a 5-axis mill. The prototype was then retrofitted with lenses and compared with the computer-generated model to demonstrate the effectiveness of this solution. This work shows the dome design improves the optical field of view of the underwater communication system considerably. Furthermore, with the experimental test results, a geometric optimization model was derived providing insights to the design performance limits.
Design↗
Distribution automation applications of fiber optics
Motivations for interest and research in distribution automation are discussed. The communication requirements of distribution automation are examined, and shown to exceed the capabilities of power line carrier, radio and telephone systems. A fiber-optic-based communication system is described that is co-located with the distribution system and that ould satisfy the data rate and reliability requirements. A cost comparison shows that it could be constructed at a cost that is similar to that of a power line carrier system. The requirements for fiber optic sensors for distribution automation are discussed. The design of a data link suitable for opticallypowered electronic sensing is presented. Empirical results are given. A modeling technique that has been used to understand the reflections of guided light from a variety of surfaces is described. An optical positionindicator design is discussed. Systems aspects of distribution automation are discussed, in particular the lack of interface, communications and data standards. The economics of distribution automation are examined
Friend, H.↗
Flexspander: augmenting expander networks in high-performance systems with optical bandwidth steering
Communication efficiency is one of the deciding factors in determining many of today’s high-performance computing (HPC) applications. Traditionally, HPC systems have been on static network topologies, making them inflexible to the variety of skewed traffic demands that may arise due to the spatial locality inherent in many applications. To handle traffic locality, researchers have proposed integrating optical circuit switches (OCSs) into the network architecture, which reconfigures the network topology to alter and dynamically adapt to the predicted traffic. In this paper, we present a novel reconfigurable network topology called Flexspander. Beyond offering a flexible interconnect, Flexspander also offers full flexibility in terms of construction and can be built with any arbitrary combination of commercial electrical packet switches and OCSs. We evaluate Flexspander performance through extensive simulations with multiple network traces, and our results show improved performance for Flexspander over currently proposed static and reconfigurable topologies in terms of the flow completion time.
Teh, Min Yee↗
Study program Transmitting Information By Optical Electronics /TIBOE/ Final report
Laser transmitting information system utilizing optical electronics for communication between space vehicle and launch platform
PULSE MODULATION↗