Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “observable behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Contributions to Dielectric Constant Enhancement in Thin Film Metal Insulator Metal Capacitors

Thin film metal-insulator-metal capacitors were fabricated with varying dielectric and electrode thicknesses and areas. Measurement of the dielectric properties of the capacitors consistently yielded higher than predicted capacitance values, which prompted the exploration of three factors that could enhance the capacitance. Modeling of the fringing capacitance and field enhancement due to the capacitor geometry, both yield capacitance gains, albeit insufficient to fully explain the observed behavior. The possible role of changes in polarizability of the dielectric film constituents, due to the amorphous nature of the films was also evaluated, but the results of the investigation of this contribution were inconclusive. Herein, the role of accumulation/depletion layers on capacitance enhancement was also analyzed. For capacitors fabricated with thinner dielectrics, the presence of these layers can effectively reduce the dielectric thickness, resulting in contributions to capacitance that are significant. The calculations completed suggest these contributions may be more important than fringing field contributions. Additional studies of these mechanisms are in progress.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hund's coupling assisted orbital-selective superconductivity in Ba1-xKxFe2As2

While the superconducting transition temperature of hole-doped Ba_{1-x}K_{x}Fe_{2}As_{2} decreases past optimal doping, superconductivity does not completely disappear even for the fully doped KFe_{2}As_{2} compound. In fact, superconductivity is robust through a Lifshitz transition where electron bands become hole-like around the zone corner at around x=0.7, thus challenging the conventional understanding of superconductivity in iron-based systems. High-resolution angle-resolved photoemission spectroscopy is used to investigate the superconducting gap structure, as well as the normal state electronic structure, around optimal doping and across the Lifshitz transition. Our findings reveal a largely orbital-dependent superconducting gap structure, where the more strongly correlated d_{xy} band has a vanishing superconducting gap at higher doping, aligning with the Hund's metal behavior observed in the normal state. Notably, the superconducting gap on the d_{xy} band disappears before the Lifshitz transition, suggesting that the Fermi surface topology may play a secondary role. We discuss how these results point to orbital-selective superconducting pairing and how strong correlations via Hund's coupling may shape superconducting gap structures in iron-based and other multiorbital superconductors.

FOS: Physical sciences↗
DOE OSTI2022

The contribution of Humboldt Glacier, northern Greenland, to sea-level rise through 2100 constrained by recent observations of speedup and retreat

Abstract. Humboldt Glacier, northern Greenland, has retreated and accelerated through the 21st century, raising concerns that it could be a significant contributor to future sea-level rise. We use a data-constrained ensemble of three-dimensional higher-order ice sheet model simulations to estimate the likely range of sea-level rise from the continued retreat of Humboldt Glacier. We first solve for basal traction using observed ice thickness, bed topography, and ice surface velocity from the year 2007 in a PDE-constrained (partial differential equation) optimization. Next, we impose calving rates to match mean observed retreat rates from winter 2007–2008 to winter 2017–2018 in a transient calibration of the exponent in the power-law basal friction relationship. We find that power-law exponents in the range of 1/7–1/5 – rather than the commonly used 1/3–1 – are necessary to reproduce the observed speedup over this period. We then tune an iceberg calving parameterization based on the von Mises stress yield criterion in another transient-calibration step to approximate both observed ice velocities and terminus position in 2017–2018. Finally, we use the range of basal friction relationship exponents and calving parameter values to generate the ensemble of model simulations from 2007–2100 under three climate forcing scenarios from CMIP5 (two RCP8.5 forcings, Representative Concentration Pathway) and CMIP6 (one SSP5-8.5 forcing, Shared Socioeconomic Pathway). Our simulations predict 5.2–8.7 mm of sea-level rise from Humboldt Glacier, significantly higher than a previous estimate (∼ 3.5 mm) and equivalent to a substantial fraction of the 40–140 mm predicted by ISMIP6 from the whole Greenland Ice Sheet. Our larger future sea-level rise prediction results from the transient calibration of our basal friction law to match the observed speedup, which requires a semi-plastic bed rheology. In many simulations, our model predicts the growth of a sizable ice shelf in the middle of the 21st century. Thus, atmospheric warming could lead to more retreat than predicted here if increased surface melt promotes hydrofracture of the ice shelf. Our data-constrained simulations of Humboldt Glacier underscore the sensitivity of model predictions of Greenland outlet glacier response to warming to choices of basal shear stress and iceberg calving parameterizations. Further, transient calibration of these parameterizations, which has not typically been performed, is necessary to reproduce observed behavior. Current estimates of future sea-level rise from the Greenland Ice Sheet could, therefore, contain significant biases.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1969

Fuel element concept for long life high power nuclear reactors

Nuclear reactor fuel elements have burnups that are an order of magnitude higher than can currently be achieved by conventional design practice. Elements have greater time integrated power producing capacity per unit volume. Element design concept capitalizes on known design principles and observed behavior of nuclear fuel.

Mcdonald, G. E.↗
NASA NTRS1972

Evidence for the trough wind

The existence of an upward flow of ionization along trough-field lines located at approximately 65 deg magnetic latitude is discussed. A flux model that fits the observed behavior of h(+0) and 0(+) was developed based on the existence of a trough wind. The measurements indicate a different behavior in the altitude distribution of ionized hydrogen in the plasmasphere as compared to the trough region. This difference is explained by the trough wind.

Brinton, H.↗
NASA NTRS1972

Transformation temperatures of martensite in beta phase nickel aluminide

Resistivity and thermal arrest measurements determined that the compositional dependence of Ms (martensite state) temperatures for NiAl martensite was linear between 60 and 69 atomic percent nickel, with Ms = 124 Ni - 7410 K. Resistivity and surface relief experiments indicated the presence of thermoelastic martensite for selected alloys. Some aspects of the transformation were studied by hot stage microscopy and related to the behavior observed for alloys exhibiting the shape-memory effect.

Smialek, J. L.↗
NASA NTRS1972

Robot, computer problem solving system

The development of a computer problem solving system is reported that considers physical problems faced by an artificial robot moving around in a complex environment. Fundamental interaction constraints with a real environment are simulated for the robot by visual scan and creation of an internal environmental model. The programming system used in constructing the problem solving system for the simulated robot and its simulated world environment is outlined together with the task that the system is capable of performing. A very general framework for understanding the relationship between an observed behavior and an adequate description of that behavior is included.

Becker, J. D.↗
NASA NTRS1973

Temporal variations in the dawn and dusk midlatitude trough position-modeled and measured (Ariel 3)

The temporal development of the latitudinal position of the 600 km midlatitude electron density trough at dawn and dusk during the period 25-27 May 1967, which encompassed a large magnetic storm, was measured by the RF capacitive probe on the polar orbiting Ariel 3 satellite. The substorm-related changes in the L coordinate of the trough minimum and the point of most rapid change of density gradient on the low latitude side of the trough are similar. Oscillations of the trough position at dusk are in phase with substorm activity whereas movement of the trough at dawn is only apparent with the onset of the large storm. Near dusk there is evidence of structure in the form of a tail-like extension of the plasmasphere at the peak of the storm. Detailed model calculations assuming a spatially invariant equatorial convection E field which varies in step with K sub p index reproduces much of the observed behavior, particularly at dusk, and shows that more than one plasmapause-type transition may be identifiable in the trough region.

Grebowsky, J. M.↗
NASA NTRS1973

Dynamics of moisture diffusion through a partially liquid filled porous matrix.

Models for unsteady water transport in fuel cell configurations of Bacon-Pratt and Whitney type are derived. Tests with a specially constructed isothermal cell producing no water and order of magnitude analysis show that diffusion through the liquid alone cannot account for the observed behavior. An analytical solution which includes diffusion in both the liquid and the gas spaces of the matrix is in better agreement with the data than models which consider diffusion in either the liquid or in the gas phase alone.

Murty, B. G. K.↗
NASA NTRS1972

Long term tests of a SNAP-19 thermoelectric generator.

Results of tests performed on a SNAP 19 thermoelectric generator, SN-20. The SN-20 generator was tested for approximately 37,000 hours using electrical heating to simulate the heat released by isotope decay. After 27,000 hours of operation the output power from the generator decreased to approximately 1/3 of the beginning of life value while the internal resistance increased by a factor of 5. Analysis of the test results, confirmed by preliminary metallographic examination, indicated that the output power degradation was the result of excessive sublimation of the thermoelectric material and loss of the hot junction bond due to the depletion of the internal cover gas. This also resulted in excessive junction temperatures. Comparison is made with the behavior observed from the two flight generators and a tentative conclusion is advanced as to the reason for their failure.

Rouklove, P.↗
NASA NTRS1973

Transformation temperatures of martensite in beta-phase nickel aluminide.

Resistivity and thermal arrest measurements determined that the compositional dependence of M sub s temperatures for NiAl martensite was linear between 60 and 69 at. % Ni, with M sub s = (124 Ni - 7410)K. Resistivity and surface relief experiments for selected alloys indicated the presence of thermoelastic martensite. Some aspects of the transformation were studied by hot-stage microscopy and related to the behavior observed for alloys exhibiting the shape-memory effect.

Smialek, J. L.↗
NASA NTRS1966

Stabilization of Tungsten-Uranium Dioxide Composites Under Thermal Cycling Conditions

Uranium losses during thermal cycling of tungsten - uranium dioxide composites to 2500° C in flowing purified hydrogen for specimens initially containing 35 volume percent uranium dioxide were reduced by the use of thorium dioxide, calcium oxide, or yttrium oxide as additives in solid solution with the uranium dioxide. The effectiveness of the additives decreased in the order yttrium oxide, calcium oxide, and thorium dioxide. Stabilization of uranium dioxide by calcium oxide or yttrium oxide can be explained in part on the basis of the introduction of oxygen vacancies into the fluorite lattice and the associated lowered partial molar free energy of oxygen. The difference in the effectiveness of calcium oxide and yttrium oxide is discussed, and a possible explanation of the observed behavior is proposed. Of the concentrations of yttrium oxide tested (i.e., 2. 5, 5, and 10 mole percent), 10 mole percent of yttrium oxide was the most effective in pre­ venting loss of uranium from composities.

Gluyas, Richard E.↗
NASA NTRS1973

Hollow cathode restartable 15 cm diameter ion thruster

The effects of substituting high perveance dished grids for low perveance flat ones on performance variables and plasma properties within a 15 cm modified SERT II thruster are discussed. Results suggest good performance may be achieved as an ion thruster is throttled if the screen grid transparency is decreased with propellant flow rate. Thruster startup tests, which employ a pulsed high voltage tickler electrode between the keeper and the cathode to initiate the discharge, are described. High startup reliability at cathode tip temperatures of about 500 C without excessive component wear over 2000 startup cycles is demonstrated. Testing of a single cusp magnetic field concept of discharge plasma containment is discussed. A theory which explains the observed behavior of the device is presented and proposed thruster modifications and future testing plans are discussed.

Wilbur, P. J.↗
NASA NTRS1973

The gravity reference response, the rotation sensation, and other illusory sensations experienced in aircraft and space flight

An analysis of the gravitational and inertial forces which act during aircraft flight upon the vestibular systems of the aircraft occupants reveals that in the absence of a visual horizon, certain illusory sensations are predictable for various acceleration environments. The 'inversion illusion' (Graybiel and Kellog, 1966) felt by some human subjects at 0 g seems to be different from the rotation sensation and could be caused by the diminished pressure forces of the otoliths on the maculae. The 'inversion illusion' of man correlates well with the blind fish diving behavior observed during aircraft parabolic flight (von Baumgarten et al., 1969, 1972). It is suggested that the fish low g diving response and the human inversion illusion are due to the substitution of a predominantly shearing force of low magnitude as a vestibular reference in place of a normal, predominantly pressure force. This hypothesis indicates that vestibular senses alone cannot provide meaningful postural orientation to simulated or actual gravity of a magnitude below that of earth's gravity.

Shillinger, G. L., Jr.↗
NASA NTRS1974

Behaviour of comet Kohoutek /1973f/

The spectral identification of CH3CN and HCN provides the first support for the hypothesis first proposed by Wurm (1943), of chemically stable 'parent molecules' for the less stable radicals and ions seen in the coma and the tail. These two molecules were among the earliest discovered in dense interstellar clouds. Circumstantial evidence for the presence of water as the dominant volatile component in the nucleus has been growing for some time. However, a much more volatile species is required to explain the observed behavior of the comet. CO, formaldehyde, or methane would quickly evaporate as the comet approached the sun.

Mendis, D. A.↗
NASA NTRS1974

High shear stress behavior of some representative lubricants

Shear stress independent behavior observed for representative, synthetic, nonblended lubricants is found to be of the same magnitude as the shear stress in sliding elastohydrodynamic contacts. It is shown that dissipation heating is the only mechanism of importance in the generation of deviations from constant viscosity as measured with capillary tube viscometric methods. Newtonian end corrections for capillary tubes are found to be constant for nonblended liquid lubricants.

Jakobsen, J.↗
NASA NTRS1976

Time-temperature-stress dependence of boron fiber deformation

The time-dependent deformation of boron fibers over the temperature range from -190 to 800 C is studied by flexural stress relaxation and flexural internal friction techniques on 203-micron diam specimen fibers commercially produced by chemical vapor deposition (CVD) on a 13-micron tungsten substrate. It is shown that up to at least 800 C all nonelastic behavior observed during axial deformation of CVD boron fibers can be explained solely by anelastic mechanisms and that although creep strains are small, boron fiber anelasticity can produce significant mechanical effects which would otherwise be neglected under the elastic approximation. Relations are obtained to demonstrate the considerable effects of anelasticity on such fiber/composite properties as modulus, creep, creep recovery, stress relaxation, and damping capacity. For an elastic-core/anelastic-sheath model, boron fibers on tungsten substrates are shown to have predictable fracture stresses for time-temperature conditions ranging from impact to long-time stress rupture. Possible techniques for altering these stresses are discussed.

Dicarlo, J. A.↗